aboutsummaryrefslogtreecommitdiff
path: root/hw/mips
AgeCommit message (Collapse)Author
2023-11-13hw/mips: LOONGSON3V depends on UNIMP deviceMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: qemu-stable@nongnu.org Fixes: c76b409fef ("hw/mips: Add Loongson-3 machine support") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231107140615.3034763-1-marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07hw/mips: FULOONG depends on VT82C686Marc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-10-23Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi
into staging virtio,pc,pci: features, cleanups infrastructure for vhost-vdpa shadow work piix south bridge rework reconnect for vhost-user-scsi dummy ACPI QTG DSM for cxl tests, cleanups, fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU # pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd # 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT # ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV # 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa # zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg= # =ILek # -----END PGP SIGNATURE----- # gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits) intel-iommu: Report interrupt remapping faults, fix return value MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section vhost-user: Fix protocol feature bit conflict tests/acpi: Update DSDT.cxl with QTG DSM hw/cxl: Add QTG _DSM support for ACPI0017 device tests/acpi: Allow update of DSDT.cxl hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range vhost-user: fix lost reconnect vhost-user-scsi: start vhost when guest kicks vhost-user-scsi: support reconnect to backend vhost: move and rename the conn retry times vhost-user-common: send get_inflight_fd once hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine hw/isa/piix: Implement multi-process QEMU support also for PIIX4 hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4 hw/isa/piix: Rename functions to be shared for PCI interrupt triggering hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 hw/isa/piix: Share PIIX3's base class with PIIX4 hw/isa/piix: Harmonize names of reset control memory regions ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-22hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4Bernhard Beschow
Resolves duplicate code. Also makes PIIX4 respect the PIIX3 properties which get added, too. This allows for using PIIX4 in the PC machine. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-25-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Merge hw/isa/piix4.cBernhard Beschow
Now that the PIIX3 and PIIX4 device models are sufficiently prepared, their implementations can be merged into one file for further consolidation. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-20-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-19hw/audio/pcspk: Inline pcspk_init()Philippe Mathieu-Daudé
pcspk_init() is a legacy init function, inline and remove it. Since the device is realized using &error_fatal, use the same error for setting the "pit" link. Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20231019073307.99608-1-philmd@linaro.org>
2023-10-19hw/mips: Merge 'hw/mips/cpudevs.h' with 'target/mips/cpu.h'Philippe Mathieu-Daudé
"hw/mips/cpudevs.h" contains declarations which are specific to the MIPS architecture; it doesn't make sense for these to be called from a non-MIPS architecture. Move the declarations to "target/mips/cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231009171443.12145-2-philmd@linaro.org>
2023-10-19hw/mips/malta: Use sdram_type enum from 'hw/i2c/smbus_eeprom.h'Philippe Mathieu-Daudé
Since commit 93198b6cad ("i2c: Split smbus into parts") the SDRAM types are enumerated as sdram_type in "hw/i2c/smbus_eeprom.h". Using the enum removes this global shadow warning: hw/mips/malta.c:209:12: error: declaration shadows a variable in the global scope [-Werror,-Wshadow] enum { SDR = 0x4, DDR2 = 0x8 } type; ^ include/hw/i2c/smbus_eeprom.h:33:19: note: previous declaration is here enum sdram_type { SDR = 0x4, DDR = 0x7, DDR2 = 0x8 }; ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231009092127.49778-1-philmd@linaro.org>
2023-10-03vt82c686 machines: Support machine-default audiodev with fallbackPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-09-25hw/mips/jazz: Simplify the NIC setup codeThomas Huth
The for-loop does not make much sense here - it is always left after the first iteration, so we can also check for nb_nics == 1 instead which is way easier to understand. Also, the checks for nd->model are superfluous since the code in mips_jazz_init_net() calls qemu_check_nic_model() that already takes care of this (i.e. initializing nd->model if it has not been set yet, and checking whether it is the "help" option or the supported NIC model). Message-ID: <20230913160922.355640-3-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-09-25hw/mips/jazz: Move the NIC init code into a separate functionThomas Huth
The mips_jazz_init() function is already quite big, so moving away some code here can help to make it more understandable. Additionally, by moving this code into a separate function, the next patch (that will refactor the for-loop around the NIC init code) will be much shorter and easier to understand. Message-ID: <20230913160922.355640-2-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-09-08trivial: Simplify the spots that use TARGET_BIG_ENDIAN as a numeric valueThomas Huth
TARGET_BIG_ENDIAN is *always* defined, either as 0 for little endian targets or as 1 for big endian targets. So we can use this as a value directly in places that need such a 0 or 1 for some reason, instead of taking a detour through an additional local variable or something similar. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-08-31hw/mips: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230823065335.1919380-7-mjt@tls.msk.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-08-22kvm: Introduce kvm_arch_get_default_type hookAkihiko Odaki
kvm_arch_get_default_type() returns the default KVM type. This hook is particularly useful to derive a KVM type that is valid for "none" machine model, which is used by libvirt to probe the availability of KVM. For MIPS, the existing mips_kvm_type() is reused. This function ensures the availability of VZ which is mandatory to use KVM on the current QEMU. Cc: qemu-stable@nongnu.org Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added doc comment for new function] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-25hw/mips: Improve the default USB settings in the loongson3-virt machineThomas Huth
It's possible to compile QEMU without the USB devices (e.g. when using "--without-default-devices" as option for the "configure" script). To be still able to run the loongson3-virt machine in default mode with such a QEMU binary, we have to check here for the availability of the OHCI controller first before instantiating the USB devices. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230714104903.284845-1-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-11Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson
into staging pc,pci,virtio: cleanups, fixes, features vhost-user-gpu: edid vhost-user-scmi device vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq cleanups, fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN # qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6 # D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd # n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5 # cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L # UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA= # =RsOh # -----END PGP SIGNATURE----- # gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits) vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ vdpa: Avoid forwarding large CVQ command failures vdpa: Accessing CVQ header through its structure vhost: Fix false positive out-of-bounds vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature vdpa: Restore MAC address filtering state vdpa: Use iovec for vhost_vdpa_net_load_cmd() pcie: Specify 0 for ARI next function numbers pcie: Use common ARI next function number include/hw/virtio: document some more usage of notifiers include/hw/virtio: add kerneldoc for virtio_init include/hw/virtio: document virtio_notify_config hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments include/hw: document the device_class_set_parent_* fns include: attempt to document device_class_set_props vdpa: Fix possible use-after-free for VirtQueueElement pcie: Add hotplug detect state register to cmask virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask() ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10hw/mips/loongson3_virt: Relax CPU restrictions for TCGJiaxun Yang
After implemented CPUCFG and CSR, we are now able to boot Linux kernel with Loongson-3A4000 CPU, so there is no point to restrict CPU type to 3A1000 only, instead we just check for presence of INSN_LOONGSON3A. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230521214832.20145-3-jiaxun.yang@flygoat.com> [JY: Check for cpu_type_supports_isa(INSN_LOONGSON3A)] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10hw/pci/pci: Remove multifunction parameter from ↵Bernhard Beschow
pci_create_simple_multifunction() There is also pci_create_simple() which creates non-multifunction PCI devices. Accordingly the parameter is always set to true when a multi function PCI device is to be created. The reason for the parameter's existence seems to be that it is used in the internal PCI code as well which is the only location where it gets set to false. This one usage can be replaced by trivial code. Remove this redundant, error-prone parameter. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230304114043.121024-5-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-08hw: Simplify calls to pci_nic_init_nofail()Thomas Huth
pci_nic_init_nofail() calls qemu_find_nic_model(), and this function sets nd->model = g_strdup(default_model) if it has not been initialized yet. So we don't have to set nd->model to the default_nic in the calling sites. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-05hw/mips/malta: Fix the malta machine on big endian hostsThomas Huth
Booting a Linux kernel with the malta machine is currently broken on big endian hosts. The cpu_to_gt32 macro wants to byteswap a value for little endian targets only, but uses the wrong way to do this: cpu_to_[lb]e32 works the other way round on big endian hosts! Fix it by using the same ways on both, big and little endian hosts. Fixes: 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers") Cc: qemu-stable@nongnu.org Message-Id: <20230330152613.232082-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-26hw/mips: Use MachineClass->default_nic in the virt machinePhilippe Mathieu-Daudé
Mark the default NIC via the new MachineClass->default_nic setting so that the machine-defaults code in vl.c can decide whether the default NIC is usable or not (for example when compiling with the "--without-default-devices" configure switch). Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230524122559.28863-1-philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-12hw/mips/malta: Fix minor dead code issuePeter Maydell
Coverity points out (in CID 1508390) that write_bootloader has some dead code, where we assign to 'p' and then in the following line assign to it again. This happened as a result of the refactoring in commit cd5066f8618b. Fix the dead code by removing the 'void *v' variable entirely and instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as we do at its other callsite in write_bootloader_nanomips(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/mips/itu: Pass SAAR using QOM link propertyPhilippe Mathieu-Daudé
QOM objects shouldn't access each other internals fields except using the QOM API. mips_cps_realize() instantiates a TYPE_MIPS_ITU object, and directly sets the 'saar' pointer: if (saar_present) { s->itu.saar = &env->CP0_SAAR; } In order to avoid that, pass the MIPS_CPU object via a QOM link property, and set the 'saar' pointer in mips_itu_realize(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230203113650.78146-10-philmd@linaro.org>
2023-03-08hw/mips: Declare all length properties as unsignedPhilippe Mathieu-Daudé
Some length properties are signed, other unsigned: hw/mips/cps.c:183: DEFINE_PROP_UINT32("num-vp", MIPSCPSState, num_vp, 1), hw/mips/cps.c:184: DEFINE_PROP_UINT32("num-irq", MIPSCPSState, num_irq, 256), hw/misc/mips_cmgcr.c:215: DEFINE_PROP_INT32("num-vp", MIPSGCRState, num_vps, 1), hw/misc/mips_cpc.c:167: DEFINE_PROP_UINT32("num-vp", MIPSCPCState, num_vp, 0x1), hw/misc/mips_itu.c:552: DEFINE_PROP_INT32("num-fifo", MIPSITUState, num_fifo, hw/misc/mips_itu.c:554: DEFINE_PROP_INT32("num-semaphores", MIPSITUState, Since negative values are not used (the minimum is '0'), unify by declaring all properties as unsigned. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230203113650.78146-9-philmd@linaro.org>
2023-02-27hw/isa: Rename isa_bus_irqs() -> isa_bus_register_input_irqs()Philippe Mathieu-Daudé
isa_bus_irqs() register an array of input IRQs on the ISA bus. Rename it as isa_bus_register_input_irqs(). Mechanical change using: $ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \ $(git grep -wl isa_bus_irqs) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230210163744.32182-10-philmd@linaro.org>
2023-01-13hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'Daniel Henrique Barboza
Follow the QEMU convention of naming MachineState pointers as 'ms' by renaming the instance in create_fdt() where we're calling it 'mc'. Cc: Paul Burton <paulburton@kernel.org> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20230111172133.334735-1-dbarboza@ventanamicro.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/mips/Kconfig: Track Malta's PIIX dependencies via KconfigBernhard Beschow
Tracking dependencies via Kconfig seems much cleaner. Note that PIIX4 already depends on ACPI_PIIX4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20230109172347.1830-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specificBernhard Beschow
pci_map_irq_fn's in general seem to be board-specific, and PIIX4's pci_slot_get_pirq() in particular seems very Malta-specific. So move the latter to malta.c to 1/ keep the board logic in one place and 2/ avoid PIIX4 to make assumptions about its board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230109172347.1830-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13mips: Remove support for trap and emulate KVMPaolo Bonzini
This support was limited to the Malta board, drop it. I do not have a machine that can run VZ KVM, so I am assuming that it works for -M malta as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221221091718.71844-1-philmd@linaro.org>
2023-01-13hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloaderPhilippe Mathieu-Daudé
Linux kernel expects the northbridge & southbridge chipsets configured by the BIOS firmware. We emulate that by writing a tiny bootloader code in write_bootloader(). Upon introduction in commit 5c2b87e34d ("PIIX4 support"), the PIIX4 configuration space included values specific to the Malta board. Set the Malta-specific IRQ routing values in the embedded bootloader, so the next commit can remove the Malta specific bits from the PIIX4 PCI-ISA bridge and make it generic (matching the real hardware). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221027204720.33611-3-philmd@linaro.org>
2023-01-13hw/mips/malta: Introduce PIIX4_PCI_DEVFN definitionPhilippe Mathieu-Daudé
The PIIX4 PCI-ISA bridge function is always located at 10:0. Since we want to re-use its address, add the PIIX4_PCI_DEVFN definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221027204720.33611-2-philmd@linaro.org>
2023-01-13hw/mips/malta: Merge common BL code as bl_setup_gt64120_jump_kernel()Philippe Mathieu-Daudé
Merge common code shared between write_bootloader() and write_bootloader_nanomips() into bl_setup_gt64120_jump_kernel(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-12-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (5/5)Philippe Mathieu-Daudé
Part 5/5: Convert jumping to kernel Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-11-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5)Philippe Mathieu-Daudé
Part 4/5: Convert GT64120 ISD base address setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-10-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (3/5)Philippe Mathieu-Daudé
Part 3/5: Convert PCI0 I/O BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-9-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (2/5)Philippe Mathieu-Daudé
Part 2/5: Convert PCI0 MEM0 BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-8-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (1/5)Philippe Mathieu-Daudé
Similarly to how commit 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers") converted write_bootloader(), convert the equivalent write_bootloader_nanomips(), allowing us to modify the bootloader code more easily in the future. Part 1/5: Convert PCI0 MEM1 BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-7-philmd@linaro.org>
2023-01-13hw/mips/bootloader: Implement nanoMIPS JALRc opcode generatorPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-6-philmd@linaro.org>
2023-01-13hw/mips/bootloader: Implement nanoMIPS LI (LUI+ORI) opcode generatorPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-5-philmd@linaro.org>
2023-01-13hw/mips/bootloader: Implement nanoMIPS SW opcode generatorPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-4-philmd@linaro.org>
2023-01-13hw/mips/bootloader: Implement nanoMIPS NOP opcode generatorPhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221211204533.85359-3-philmd@linaro.org>
2023-01-13hw/mips/bootloader: Handle buffers as opaque arraysPhilippe Mathieu-Daudé
It is irrelevant to the API what the buffers to fill are made of. In particular, some MIPS ISA have 16-bit wide instructions. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-2-philmd@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Move it to hw/pci-host/Philippe Mathieu-Daudé
The GT-64120 is a north-bridge, and it is not MIPS specific. Move it with the other north-bridge devices. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221209151533.69516-8-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/meson: Make gt64xxx_pci.c endian-agnosticPhilippe Mathieu-Daudé
The single machine using this device explicitly sets its endianness. We don't need to set a default. This allow us to remove the target specificity from the build system. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20221209151533.69516-7-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/malta: Explicit GT64120 endianness upon device creationPhilippe Mathieu-Daudé
Propagate the controller endianess from the machine, setting the "cpu-little-endian" property. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221209151533.69516-6-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Add a 'cpu-little-endian' qdev propertyPhilippe Mathieu-Daudé
This device does not have to be TARGET-dependent. Add a 'cpu_big_endian' property which sets the byte-swapping options if required. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221220113436.14299-5-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Manage endian bits with the RegisterFields APIPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221220113436.14299-4-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB holePhilippe Mathieu-Daudé
Per the comment in the Malta board, the [0x0000.0000-0x2000.0000] range is decoded by the GT64120, so move the "empty_slot" there. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221209151533.69516-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/Kconfig: Introduce CONFIG_GT64120 to select gt64xxx_pci.cPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221209151533.69516-2-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOpsPhilippe Mathieu-Daudé
GT64120's PCI endianness swapping works on little-endian hosts, but doesn't on big-endian ones. Instead of complicating how CFGADDR/CFGDATA registers deal with endianness, use the existing MemoryRegionOps from hw/pci/pci_host.c. Doing so also reduce the access to internal PCI_HOST_BRIDGE fields. Map the PCI_HOST_BRIDGE MemoryRegionOps into the corresponding CFGADDR/CFGDATA regions in the ISD MMIO and remove the unused code in the current ISD read/write handlers. Update the mapping when PCI0_CMD register is accessed (in case the endianness is changed). This allows using the GT64120 on a big-endian host (and boot the MIPS Malta machine in little-endian). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230104133935.4639-6-philmd@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 21:19:33 +0000