aboutsummaryrefslogtreecommitdiff
path: root/hw/microblaze
AgeCommit message (Collapse)Author
2023-09-01hw/ssi: Check for duplicate CS indexesCédric Le Goater
This to avoid indexes conflicts on the same SSI bus. Adapt machines using multiple devices on the same bus to avoid breakage. Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-07-25other architectures: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-27hw/char/xilinx_uartlite: Open-code xilinx_uartlite_create()Philippe Mathieu-Daudé
Open-code the single use of xilinx_uartlite_create(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230220115114.25237-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-21hw/microblaze: pass random seed to fdtJason A. Donenfeld
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to initialize early. Set this using the usual guest random number generation function. This FDT node is part of the DT specification. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06Replace TARGET_WORDS_BIGENDIANMarc-André Lureau
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1, and thus should always be defined to prevent misuse. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-15hw/microblaze: Replace drive_get_next() by drive_get()Markus Armbruster
drive_get_next() is basically a bad idea. It returns the "next" block backend of a certain interface type. "Next" means bus=0,unit=N, where subsequent calls count N up from zero, per interface type. This lets you define unit numbers implicitly by execution order. If the order changes, or new calls appear "in the middle", unit numbers change. ABI break. Hard to spot in review. Machine "petalogix-ml605" connects backends with drive_get_next() in a counting loop. Change it to use drive_get() directly. This makes the unit numbers explicit in the code. Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20211117163409.3587705-10-armbru@redhat.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15vl: make qemu_get_machine_opts staticPaolo Bonzini
Machine options can be retrieved as properties of the machine object. Encourage that by removing the "easy" accessor to machine options. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10microblaze: do not use ram_size globalPaolo Bonzini
Use the equivalent argument to the function instead. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-25load_elf: Remove unused address variables from callersBALATON Zoltan
Several callers of load_elf() pass pointers for lowaddr and highaddr parameters which are then not used for anything. This may stem from a misunderstanding that load_elf need a value here but in fact it can take NULL to ignore these values. Remove such unused variables and pass NULL instead from callers that don't need these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-07target/microblaze: Move pvr regs to MicroBlazeCPUConfigRichard Henderson
These values are constant, and are derived from the other configuration knobs. Move them into MicroBlazeCPUConfig to emphasize that they are not variable. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-08-21meson: convert hw/arch*Marc-André Lureau
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up from there when building the per-emulator static_library. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster
Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-06-23qdev: Make qdev_prop_set_drive() match the other helpersMarkus Armbruster
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO() can; they abort on error. To clean up this inconsistency, rename qdev_prop_set_drive() to qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that aborts on error. Coccinelle script to update callers: @ depends on !(file in "hw/core/qdev-properties-system.c")@ expression dev, name, value; symbol error_abort; @@ - qdev_prop_set_drive(dev, name, value, &error_abort); + qdev_prop_set_drive(dev, name, value); @@ expression dev, name, value, errp; @@ - qdev_prop_set_drive(dev, name, value, errp); + qdev_prop_set_drive_err(dev, name, value, errp); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2Markus Armbruster
This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1Markus Armbruster
The callers of sysbus_init_child_obj() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use sizeof(child_type) instead, mostly to keep future commits simpler. Coccinelle script: @@ expression parent, propname, type; type T; T child; @@ - sysbus_init_child_obj(parent, propname, &child, sizeof(T), type) + sysbus_init_child_obj(parent, propname, &child, sizeof(child), type) @@ expression parent, propname, type; type T; T *child; @@ - sysbus_init_child_obj(parent, propname, child, sizeof(T), type) + sysbus_init_child_obj(parent, propname, child, sizeof(*child), type) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-42-armbru@redhat.com>
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15qom: Tidy up a few object_initialize_child() callsMarkus Armbruster
The callers of object_initialize_child() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that don't, mostly to keep the next commit simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-36-armbru@redhat.com>
2020-06-15ssi: Convert uses of ssi_create_slave_no_init() with CoccinelleMarkus Armbruster
Replace dev = ssi_create_slave_no_init(bus, type_name); ... qdev_init_nofail(dev); by dev = qdev_new(type_name); ... qdev_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. @@ type SSIBus; identifier bus; expression dev, qbus, expr; expression list args; @@ - bus = (SSIBus *)qbus; + bus = qbus; // TODO fix up decl ... - dev = ssi_create_slave_no_init(bus, args); + dev = qdev_new(args); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = ssi_create_slave_no_init(bus, args); + dev = qdev_new(args); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, BUS(bus), &error_fatal); Bus declarations fixed up manually. Cc: Alistair Francis <alistair@alistair23.me> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-24-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-05-15various: Remove unnecessary OBJECT() castPhilippe Mathieu-Daudé
The OBJECT() macro is defined as: #define OBJECT(obj) ((Object *)(obj)) Remove the unnecessary OBJECT() casts when we already know the pointer is of Object type. Patch created mechanically using spatch with this script: @@ typedef Object; Object *o; @@ - OBJECT(o) + o Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: John Snow <jsnow@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200512070020.22782-3-f4bug@amsat.org> [Trivial rebase conflict in hw/s390x/sclp.c resolved]
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-02-28hw: Make MachineClass::is_default a boolean typePhilippe Mathieu-Daudé
There's no good reason for it to be type int, change it to bool. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-3-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-02-28hw: Do not initialize MachineClass::is_default to 0Philippe Mathieu-Daudé
The MachineClass is already zeroed on creation. Note: The code setting is_default=0 in hw/i386/pc_piix.c is different (related to compat options). When adding a new versioned machine, we want it to be the new default, so we have to mark the previous one as not default. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-2-philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-01-29hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic
While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2019-10-04microblaze: fix leak of fdevice tree blobPaolo Bonzini
The device tree blob returned by load_device_tree is malloced. Free it before returning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-20hw/misc: Add a config switch for the "unimplemented" deviceThomas Huth
The device is only used by some few boards. Let's use a proper Kconfig switch so that we only compile this code if we really need it. Message-Id: <20190817101931.28386-8-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-24hw/microblaze/zynqmp: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (with a bit of manual fix-up for overly long lines): @use_object_initialize_child@ expression parent_obj; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, &error_abort, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL); ... ?- object_unref(OBJECT(child_ptr)); | - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, errp, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp); ... ?- object_unref(OBJECT(child_ptr)); ) While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-15-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/microblaze/zynqmp: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (then manually modified to use numbered IPI name) @use_sysbus_init_child_obj_missing_parent@ expression child_ptr; expression child_type; expression child_size; @@ - object_initialize(child_ptr, child_size, child_type); ... - qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default()); ... ?- object_unref(OBJECT(child_ptr)); + sysbus_init_child_obj(OBJECT(PARENT_OBJ), "CHILD_NAME", child_ptr, + child_size, child_type); We let the SoC adopt the IPI children. While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. This choice also matches when using sysbus_init_child_obj(), since its code is: void sysbus_init_child_obj(Object *parent, const char *childname, void *child, size_t childsize, const char *childtype) { object_initialize_child(parent, childname, child, childsize, childtype, &error_abort, NULL); qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); } Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-14-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/microblaze/zynqmp: Let the SoC manage the IPI devicesPhilippe Mathieu-Daudé
The Inter Processor Interrupt is a block part of the SoC, not the "machine" (See Zynq UltraScale+ Device TRM UG1085, "Platform Management Unit", Power Domains and Islands). Move the IPI management from the machine to the SoC. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-13-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/microblaze/zynqmp: Move the IPI state into the PMUSoC statePhilippe Mathieu-Daudé
The Inter Processor Interrupt is a block part of the SoC, not the "machine" (talking about machine is borderline with the PMU, since it is embedded into the ZynqMP SoC, but currentl QEMU doesn't support multi-arch cores). Move the IPI state to the SoC state, this will simplify the review of the next patch. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-12-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 2Markus Armbruster
Our pflash devices are simplistically modelled has having "num-blocks" sectors of equal size "sector-length". Real hardware commonly has sectors of different sizes. How our "sector-length" property is related to the physical device's multiple sector sizes is unclear. Helper functions pflash_cfi01_register() and pflash_cfi02_register() create a pflash device, set properties including "sector-length" and "num-blocks", and realize. They take parameters @size, @sector_len and @nb_blocs. QOMification left parameter @size unused. Obviously, @size should match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs. All callers satisfy this. Remove @nb_blocs and compute it from @size and @sector_len. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-16-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 1Markus Armbruster
QOMification left parameter @qdev unused in pflash_cfi01_register() and pflash_cfi02_register(). All callers pass NULL. Remove. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-15-armbru@redhat.com>
2019-03-08Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2019-03-08' into staging - qtest fixes - Some generic clean-ups by Philippe - macOS CI testing via cirrus-ci.com # gpg: Signature made Fri 08 Mar 2019 08:58:47 GMT # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-03-08: cirrus.yml: Add macOS continuous integration task tests/bios-tables: Improve portability by searching bash in the $PATH vhost-user-test: fix leaks tests: Do not use "\n" in g_test_message() strings hw/devices: Remove unused TC6393XB_RAM definition hw: Remove unused 'hw/devices.h' include tests: Move qdict-test-data.txt to tests/data/qobject/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # tests/vhost-user-test.c
2019-03-07hw: Remove unused 'hw/devices.h' includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-03-07microblaze-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>