aboutsummaryrefslogtreecommitdiff
path: root/hw/mem/pc-dimm.c
AgeCommit message (Collapse)Author
2018-08-23pc-dimm: assign and verify the "addr" property during pre_plugDavid Hildenbrand
We can assign and verify the address before realizing and trying to plug. reading/writing the address property should never fail for DIMMs, so let's reduce error handling a bit by using &error_abort. Getting access to the memory region now might however fail. So forward errors from get_memory_region() properly. As all memory devices should use the alignment of the underlying memory region for guest physical address asignment, do detection of the alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the alignment for compatibility handling. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180801133444.11269-5-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23pc-dimm: assign and verify the "slot" property during pre_plugDavid Hildenbrand
We can assign and verify the slot before realizing and trying to plug. reading/writing the slot property should never fail, so let's reduce error handling a bit by using &error_abort. To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180801133444.11269-2-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: get_memory_region() will not fail after realizeDavid Hildenbrand
Let's try to reduce error handling a bit. In the plug/unplug case, the device was realized and therefore we can assume that getting access to the memory region will not fail. For get_vmstate_memory_region() this is already handled that way. Document both cases. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-13-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: merge get_(vmstate_)memory_region()David Hildenbrand
Importantly, get_vmstate_memory_region() should also fail with a proper error if called before the device is realized. For a PCDIMM, both functions are to return the same thing, so share the implementation. All current users are called after the device has been realized, so we can expect the calls to succeed. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-9-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28hostmem: drop error variable from host_memory_backend_get_memory()David Hildenbrand
Unused, so let's remove it. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-8-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: remove pc_dimm_get_free_slot() from headerDavid Hildenbrand
Not used outside of pc-dimm.c and there shouldn't be other users. If other devices (e.g. memory devices) ever have to also use slots, then we will have to factor this out. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-5-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: rename pc_dimm_memory_* to pc_dimm_*David Hildenbrand
Let's rename it to make it look more consistent. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-4-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: remove leftover "struct pc_dimms_capacity"David Hildenbrand
Not needed anymore, let's drop it. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-2-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-11pc-dimm: fix error messages if no slots were definedDavid Hildenbrand
If no slots were defined we try to allocate an empty bitmap, which fails. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20180427120515.24067-1-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-07pc-dimm: move actual plug/unplug of a memory region to MemoryDeviceDavid Hildenbrand
Registering the memory region for migration has do be done by the owner. There could be cases, where we don't want to migrate the memory. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-8-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07pc-dimm: factor out capacity and slot checks into MemoryDeviceDavid Hildenbrand
Move the checks into memory_device_get_free_addr(). This will check before doing any calculations if we have KVM/vhost slots left and if the total region size would be exceeded. Of course, while at it, make it independent of pc-dimm code. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-7-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07pc-dimm: factor out address search into MemoryDevice codeDavid Hildenbrand
This mainly moves code, but does a handfull of optimizations: - We pass the machine instead of the address space properties - We check the hinted address directly and handle fragmented memory better - We make the search independent of pc-dimm Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-6-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07pc-dimm: pass in the machine and to the MemoryHotplugStateDavid Hildenbrand
We use the machine internally either way, so let's just pass it in then. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-5-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07pc-dimm: no need to pass the memory regionDavid Hildenbrand
We can just query it ourselves. When unplugging, we should always be able to the region (as it was previously plugged). E.g. PPC already assumed that and used &error_abort. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-4-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07pc-dimm: factor out MemoryDevice interfaceDavid Hildenbrand
On the qmp level, we already have the concept of memory devices: "query-memory-devices" Right now, we only support NVDIMM and PCDIMM. We want to map other devices later into the address space of the guest. Such device could e.g. be virtio devices. These devices will have a guest memory range assigned but won't be exposed via e.g. ACPI. We want to make them look like memory device, but not glued to pc-dimm. Especially, it will not always be possible to have TYPE_PC_DIMM as a parent class (e.g. virtio devices). Let's use an interface instead. As a first part, convert handling of - qmp_pc_dimm_device_list - get_plugged_memory_size to our new model. plug/unplug stuff etc. will follow later. A memory device will have to provide the following functions: - get_addr(): Necessary, as the property "addr" can e.g. not be used for virtio devices (already defined). - get_plugged_size(): The amount this device offers to the guest as of now. - get_region_size(): Because this can later on be bigger than the plugged size. - fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-20qmp: distinguish PC-DIMM and NVDIMM in MemoryDeviceInfoListHaozhong Zhang
It may need to treat PC-DIMM and NVDIMM differently, e.g., when deciding the necessity of non-volatile flag bit in SRAT memory affinity structures. A new field 'nvdimm' is added to the union type MemoryDeviceInfo for such purpose. Its type is currently PCDIMMDeviceInfo and will be updated when necessary in the future. It also fixes "info memory-devices"/query-memory-devices which currently show nvdimm devices as dimm devices since object_dynamic_cast(obj, TYPE_PC_DIMM) happily cast nvdimm to TYPE_PC_DIMM which it's been inherited from. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20pc-dimm: make qmp_pc_dimm_device_list() sort devices by addressHaozhong Zhang
Make qmp_pc_dimm_device_list() return sorted by start address list of devices so that it could be reused in places that would need sorted list*. Reuse existing pc_dimm_built_list() to get sorted list. While at it hide recursive callbacks from callers, so that: qmp_pc_dimm_device_list(qdev_get_machine(), &list); could be replaced with simpler: list = qmp_pc_dimm_device_list(); * follow up patch will use it in build_srat() Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-15spapr: replace numa_get_node() with lookup in pc-dimm listIgor Mammedov
SPAPR is the last user of numa_get_node() and a bunch of supporting code to maintain numa_info[x].addr list. Get LMB node id from pc-dimm list, which allows to remove ~80LOC maintaining dynamic address range lookup list. It also removes pc-dimm dependency on numa_[un]set_mem_node_id() and makes pc-dimms a sole source of information about which node it belongs to and removes duplicate data from global numa_info. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-08-22hw/ppc/spapr: Fix segfault when instantiating a 'pc-dimm' without 'memdev'Thomas Huth
QEMU currently crashes when trying to use a 'pc-dimm' on the pseries machine without specifying its 'memdev' property. This happens because pc_dimm_get_memory_region() does not check whether the 'memdev' property has properly been set by the user. Looking closer at this function, it's also obvious that it is using &error_abort to call another function - and this is bad in a function that is used in the hot-plugging calling chain since this can also cause QEMU to exit unexpectedly. So let's fix these issues in a proper way now: Add a "Error **errp" parameter to pc_dimm_get_memory_region() which we use in case the 'memdev' property has not been set by the user, and which we can use instead of the &error_abort, and change the callers of get_memory_region() to make use of this "errp" parameter for proper error checking. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-07-14dimm: Convert to DEFINE_PROP_LINKFam Zheng
Unlike the usual object_property_add_link() invocations in other devices, dimm checks the "is mapped" state of the backend in addition to qdev_prop_allow_set_link_before_realize. To convert it without specializing DEFINE_PROP_LINK which always uses the qdev general check callback, move the extra check to device realize time. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170714021509.23681-11-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14qom: enforce readonly nature of link's check callbackIgor Mammedov
link's check callback is supposed to verify/permit setting it, however currently nothing restricts it from misusing it and modifying target object from within. Make sure that readonly semantics are checked by compiler to prevent callback's misuse. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170714021509.23681-2-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-20pc-dimm: make "size" property uint64Marc-André Lureau
This carries the memory_region_size() value without implicit cast. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-23-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20pc-dimm: use get_uint() for dimm propertiesMarc-André Lureau
TYPE_PC_DIMM's property PC_DIMM_ADDR_PROP is defined with DEFINE_PROP_UINT64(). TYPE_PC_DIMM's property PC_DIMM_NODE_PROP is defined with DEFINE_PROP_UINT32(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-22-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-13hostmem: detect host backend memory is being used properlyXiao Guangrong
Currently, we use memory_region_is_mapped() to detect if the host backend memory is being used. This works if the memory is directly mapped into guest's address space, however, it is not true for nvdimm as it uses aliased memory region to map the memory. This is why this bug can happen: https://bugzilla.redhat.com/show_bug.cgi?id=1352769 Fix it by introduce a new filed, is_mapped, to HostMemoryBackend, we set/clear this filed accordingly when the device link/unlink to host backend memory Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-24pc-dimm: introduce get_vmstate_memory_region callbackXiao Guangrong
This callback returns the MemoryRegion that is the memory of dimm should be kept during live migration nvdimm device is different with pc-dimm as its memory includes not only the MemoryRegion directly mapping to guest's address space but also the memory used as label data Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc-dimm: introduce realize callbackXiao Guangrong
nvdimm needs to check if the backend memory is large enough to contain label data and init its memory region when the device is realized, so introduce realize callback which is called after common dimm has been realize Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-07pc-dimm: get memory region from ->get_memory_region()Xiao Guangrong
Curretly, the memory region of backed memory is all directly mapped to guest's address space, however, it will be not true for nvdimm device if we introduce nvdimm label which only can be indirectly accessed by ACPI DSM method Also it improves the comments a bit to reflect this fact Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-11pc-dimm: fix error handling in pc_dimm_check_memdev_is_busy()Igor Mammedov
If host_memory_backend_get_memory() were to return error and NULL MemoryRegion, pc_dimm_check_memdev_is_busy() would crash dereferencing NULL pointer in memory_region_is_mapped(). But if error is set and non NULL MemoryRegion is returned then error_setg() will fail with "error already set" assertion in error_setv() To avoid above issues use typical error handling pattern for property setters: Error *local_error = NULL; ... error_propagate(errp, local_err); Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23move get_current_ram_size to virtio-balloon.cVladimir Sementsov-Ogievskiy
get_current_ram_size() is used only in virtio-balloon.c This patch moves it into virtio-balloon and make it static, to allow some balloon-specific tuning. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2015-11-02memory: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for memory-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-29Revert "memhp: extend address auto assignment to support gaps"Michael S. Tsirkin
This reverts commit df0acded19ec4b826aa095cfc19d341bd66fafd3. There's no point to it now that the only user has been reverted. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-22pc-dimm: add vhost slots limit check before commiting to hotplugIgor Mammedov
it allows safely cancel memory hotplug if vhost backend doesn't support necessary amount of memory slots and prevents QEMU crashing in vhost due to hitting vhost limit on amount of supported memory ranges. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-06pc-dimm: Fail realization for invalid nodes in non-NUMA configBharata B Rao
pc_dimm_realize() validates the NUMA node to which memory hotplug is being performed only in case of NUMA configuration. Include a check to fail for invalid nodes in case of non-NUMA configuration too. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02memhp: extend address auto assignment to support gapsIgor Mammedov
setting gap to TRUE will make sparse DIMM address auto allocation, leaving gaps between a new DIMM address and preceeding existing DIMM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-03numa,pc-dimm: Store pc-dimm memory information in numa_infoBharata B Rao
Start storing the (start_addr, end_addr) of the pc-dimm memory in corresponding numa_info[node] so that this information can be used to lookup node by address. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03pc,pc-dimm: Factor out reusable parts in pc_dimm_plug to a separate routineBharata B Rao
pc_dimm_plug() has code that will be needed for memory plug handlers in other archs too. Extract code from pc_dimm_plug() into a generic routine pc_dimm_memory_plug() that resides in pc-dimm.c. Also correspondingly refactor re-usable unplug code into pc_dimm_memory_unplug(). Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-06-04pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range sizeIgor Mammedov
Drop superfluous pc-dimm alignment on hot-pluggable mem range size assert, since it causes QEMU crash during hotplug when hotplugging pc-dimm with alignment bigger than an alignment of hot-pluggable mem range size. Instead allow pc_dimm_get_free_addr() find free address and bail out gracefully later in that function during checking if pc-dimm will fit in hot-pluggable mem range. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-19pc-dimm: Add description for device list.Paulo Vital
The pc-dimm option presented on device list (by argument "-device \?") is the unique option that don't have any information about it. This patch adds a description for the pc-dimm device to help users to identify it. Signed-off-by: Paulo Vital <paulo.vital@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-04pc-dimm: add a function to calculate VM's current RAM sizezhanghailiang
The global parameter 'ram_size' does not take into account the hotplugged memory. In some codes, we use 'ram_size' as current VM's real RAM size, which is not correct. Add function 'get_current_ram_size' to calculate VM's current RAM size, it will enumerate present memory devices and also plus ram_size. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-23numa: Move NUMA declarations from sysemu.h to numa.hEduardo Habkost
Not all sysemu.h users need the NUMA declarations, and keeping them in a separate file makes it easier to see what are the interfaces provided by numa.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-01-27pc-dimm: Add Error argument to pc_existing_dimms_capacityBharata B Rao
Now that pc_existing_dimms_capacity() is an API, include Error pointer as an argument and modify the caller appropriately. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2015-01-27pc-dimm: Make pc_existing_dimms_capacity globalBharata B Rao
Move pc_existing_dimms_capacity() to pc-dimm.c since it would be needed by PowerPC memory hotplug code too. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-23pc: pc-dimm: use backend alignment during address auto allocationIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-23pc: limit DIMM address and size to page aligned valuesIgor Mammedov
When running in KVM mode, kvm_set_phys_mem() will silently fail if registered MemoryRegion address/size is not page aligned. Causing memory hotplug failure in guest. Mapping non aligned MemoryRegion in TCG mode 'works', but sane guest OS still expects page aligned memory module and fails to initialize it if it's not aligned. So do not allow non aligned (i.e. valid) address/size values for DIMM to avoid either KVM failure or guest issues caused by it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-02 00:54:03 +0000