aboutsummaryrefslogtreecommitdiff
path: root/hw/mc146818rtc.c
AgeCommit message (Collapse)Author
2011-07-23mc146818rtc: Handle host clock resetsJan Kiszka
Make use of the new clock reset notifier to update the RTC whenever rtc_clock is the host clock and that happens to jump backward. This avoids that the RTC stalls for the period the host clock was set back. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-01-29mc146818rtc: update registers after a format changeAurelien Jarno
For some unknown reason, the MIPS kernel briefly changes the RTC to binary mode during boot, switch back to BCD mode and read the time. As the registers are updated only every second, they may still be in the old format when they are read. This patch forces a register update immediately after a format change (BCD/binary or 12/24H). This avoid long fsck during boot due to time wrap. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29mc146818rtc: constantifyAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-11Keep track of ISA ports ISA device is using in qdev.Gleb Natapov
Store all io ports used by device in ISADevice structure. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06make rtc alatm workGleb Natapov
Convert alarm time from BCD if needed before comparing with current time. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-13hpet/rtc: Rework RTC IRQ replacement by HPETJan Kiszka
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push routing to IRQ8 completely into the HPET. This allows to turn hpet_in_legacy_mode() into a private function. Furthermore, this stops the RTC from clearing IRQ8 even if the HPET is in control. This patch comes with a side effect: The RTC timers will no longer be stoppend when there is no IRQ consumer, possibly causing a minor performance degration. But as the guest may want to redirect the RTC to the SCI in that mode, it should normally disable unused IRQ source anyway. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-30mc146818rtc: improve debuggingBlue Swirl
Add a separate flag for debugging coalesced interrupts. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15mc146818rtc: remove #ifdef DEBUG_CMOS.Isaku Yamahata
remove #ifdef DEBUG_CMOS by using macro. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15rtc: make rtc_xxx accept/return ISADevice instead of RTCState.Isaku Yamahata
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice instead of RTCState. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15mc146818rtc: Register vmstate via qdevJan Kiszka
After defining the required alias ID, we can push vmstate registration of mc146818rtc to qdev. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Move x86 specific PC declarations to a separate fileBlue Swirl
x86 definitions (especially CPUState uses) prevent many files from being compiled within libhw. Move x86 specific declarations (APIC stuff) to a separate file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-08QMP: Introduce RTC_CHANGE eventLuiz Capitulino
Emitted whenever the RTC time changes. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20reduce number of reinjects on ACKGleb Natapov
Windows 7 BSODs under load with HAL_RTC_IRQF_WILL_NOT_CLEAR error. It happens here: hal!HalpRtcUnmaskClock: 8281b93a 8bff mov edi,edi 8281b93c 56 push esi 8281b93d 33f6 xor esi,esi 8281b93f 6a0c push 0Ch 8281b941 e8b2ffffff call hal!CMOS_READ (8281b8f8) 8281b946 84c0 test al,al 8281b948 7920 jns hal!HalpRtcUnmaskClock+0x30 (8281b96a) 8281b94a 6a0a push 0Ah 8281b94c 46 inc esi 8281b94d e854c8ffff call hal!KeStallExecutionProcessor (828181a6) 8281b952 83fe64 cmp esi,64h 8281b955 72e8 jb hal!HalpRtcUnmaskClock+0x5 (8281b93f) 8281b957 6a00 push 0 8281b959 6a00 push 0 8281b95b 6a00 push 0 8281b95d 680a010000 push 10Ah 8281b962 6a5c push 5Ch 8281b964 ff1500c38082 call dword ptr [hal!_imp__KeBugCheckEx (8280c300)] 8281b96a 5e pop esi 8281b96b c3 ret So it loops for 100(64h) times reading register C before BSOD. Lets reduce number of immediate reinjection well under this limit. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12fix rtc-td-hack on host without high-res timersGleb Natapov
On hosts without high-res timers it is impossible to inject rtc interrupt faster then 1kHz. Windows sometimes configures RTC to generate 1kHz interrupts, so we can't inject missed interrupts when running on such hosts. Always injecting an interrupt on REG_C read is also not an option since Windows wait for REG_C to become zero with interrupt disabled during boot. This patch uses mixed approach: accelerate timer + inject up to 1000 interrupts on REG_C read. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-22BCD cleanupPaul Brook
Combine multiple BCD implementations. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-10-27mc146818rtc: remove rtc_mm_init()Juan Quintela
It was used for Acer Pica 61 emulation, removed in 2008 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27mc146818rtc: fix indentationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27mc146818rtc: port rtc to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27mc145818rtc: fix saving of rtc-td hack properly upgrading the version numberJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12TARGET_I386 is always defined if TARGET_X86_64 is definedJuan Quintela
Patchworks-ID: 35378 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Enable host-clock-based RTCJan Kiszka
Switch RTC emulations to the new host_clock instead of vm_clock by default. This has the advantage that the emulated RTC will follow automatically the host time while it might be tuned via NTP. vm_clock can still be selected by passing '-rtc clock=vm' on the command line. Note that some RTC emulations (at least M48T59) already use the host time unconditionally while others (namely MC146818) do not. This patch introduces the required infrastructure for selecting the base clock but only converts MC146818 for now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-10qdev/isa: convert real time clockGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-09RTC polling mode brokenBernhard Kauer
The RTC emulation does not set the IRQ flags independent of the IRQ enable bits. The original MC146818A datasheet from 1984 notes: "flag bits in Register C [...] are set independent of the state of the corresponding enable bits in Register B" Similar sections can be found in newer documentation e.g. in rtc82885. Qemu and Bochs set the IRQ flags only if they are enabled, which breaks drivers polling on them. The following patch corrects this for the update-ended-flag in Qemu only. It does not fix the handling of the other flags. Signed-off-by: Bernhard Kauer <kauer@tudos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-15Incorporate changes from v2 of Gleb's RTC reset patchAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-14Add rtc reset function.Gleb Natapov
On reset: Periodic Interrupt Enable (PIE) bit is cleared to zero Alarm Interrupt Enable (AIE) bit is cleared to zero Update ended Interrupt Flag (UF) bit is cleared to zero Interrupt Request status Flag (IRQF) bit is cleared to zero Periodic Interrupt Flag (PF) bit is cleared to zero Alarm Interrupt Flag (AF) bit is cleared to zero Square Wave output Enable (SQWE) zero Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-22Change RTC time drift IRQ re-injection (Gleb Natapov)aliguori
Currently IRQ are reinjected as soon as they are acknowledged to the RTC, but Windows sometimes do acknowledgement in a loop with global interrupt disabled waiting for interrupt to be cleared and it does not mask RTC vector in PIC/APIC while doing this. In such situation interrupt injection always fails and RTC interrupt is never cleared. Instead of reinjecting coalesced IRQs on acknowledgement the patch below reinjects them by accelerating RTC clock a bit. This way RTC interrupt is not constantly raced after coalesced interrupt. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7231 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Fix RTC breakage from r7031.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7062 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-07mc146818: add square wave output supportaurel32
This is necessary for es40 as the sqw output is directly connected to the core chipset. Signed-off-by: Tristan Gingold <gingold@adacore.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7031 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24Support epoch of 1980 in RTC emulation for MIPS Magnumaurel32
On the MIPS Magnum, the time that is held in the RTC's NVRAM should be relative to midnight on 1980-01-01. This patch adds an extra parameter to rtc_init(), allowing different epochs to be used. For the Magnum, 1980 is specified, and for all other machines, 2000 is specified. I've not modified the handling of the century byte, as with an epoch of 1980 and a year of 2009, one could argue that it should hold either 0, 1, 19 or 20. NT 3.50 on MIPS does not read the century byte. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6429 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15Add -rtc-td-hack option to fix time drift with RTC on Windows (Gleb Natapov)aliguori
After my last patch to fix interrupt coalescing was rejected on the basis that it is too intrusive we decided to make the fix much more localized and only fix the problem for RTC time source. Unfortunately it is impossible to fix the problem entirely inside RTC code like Andrzej proposed since Windows reads RTC register C more then once on each time interrupt so it is impossible to count reliably how many interrupt windows actually handled. Proposed solution is localized to I386 target and is disabled by default. To enable it "-rtc-td-hack" flag should be used. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6320 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14Fix day of week in mc146818aurel32
According to mc146818 specification, Day of Week register (#6) is between 1 and 7, 1 representing Sunday. According C specification, tm_wday field in struct tm is between 0 and 6, 0 representing Sunday. Bit 2 of register B (#11) is named DM (data mode) and specifies if RTC stores values in BCD or in binary form. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6310 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18Remove trailing spaces introduced by commit 6081aurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6085 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-17Add HPET emulation to qemu (Beth Kon)aliguori
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet provides a more finely granular clocksource than otherwise available on PC. This means that latency-dependent applications (e.g. multimedia) will generally be smoother when using the HPET. Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01Change MMIO callbacks to use offsets, not absolute addresses.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2008-02-17Unify RTCs that use host time, fix M48t59 alarm.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3984 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-16qemu_put signedness fixes, by Andre Przywara.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3824 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-18Add statics and missing #includes for prototypes.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3683 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-07added -startdate optionbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3540 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 18:38:28 +0000