| Age | Commit message (Collapse) | Author |
|---|
|
The arguments of error_report() should yield a short error string
without newlines.
A few places try to print additional help after the error message by
embedding newlines in the error string. That's nice, but let's do it
the right way.
Since I'm touching these lines anyway, drop a stray preposition and
some tabs. We don't use tabs for similar messages elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
pci,virtio
This further optimizes MSIX handling in virtio-pci.
Also included is pci cleanup by Paolo, and pci device
assignment fix by Alex.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* mst/tags/for_anthony:
pci-assign: Enable MSIX on device to match guest
pci: use constants for devices under the 1B36 device ID, document them
ivshmem: use symbolic constant for PCI ID, add to pci-ids.txt
virtio-9p: use symbolic constant, add to pci-ids.txt
reorganize pci-ids.txt
docs: move pci-ids.txt to docs/specs/
vhost: backend masking support
vhost: set started flag while start is in progress
virtio-net: set/clear vhost_started in reverse order
virtio: backend virtqueue notifier masking
virtio-pci: cache msix messages
kvm: add stub for update msi route
msix: add api to access msix message
virtio: don't waste irqfds on control vqs
|
|
Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When a guest enables MSIX on a device we evaluate the MSIX vector
table, typically find no unmasked vectors and don't switch the device
to MSIX mode. This generally works fine and the device will be
switched once the guest enables and therefore unmasks a vector.
Unfortunately some drivers enable MSIX, then use interfaces to send
commands between VF & PF or PF & firmware that act based on the host
state of the device. These therefore may break when MSIX is managed
lazily. This change re-enables the previous test used to enable MSIX
(see qemu-kvm a6b402c9), which basically guesses whether a vector
will be used based on the data field of the vector table.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
* qemu-kvm/uq/master:
qemu-kvm/pci-assign: 64 bits bar emulation
target-i386: Enabling IA32_TSC_ADJUST for QEMU KVM guest VMs
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Enable 64 bits bar emulation.
Test pass with the current seabios which already support 64bit pci bars.
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Adapt header include paths.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Adapt helper functions to pass X86CPU / PowerPCCPU / S390CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
update all users so we can remove the makefile hack.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rename: kvm_piix3_gsi_handlei() -> kvm_pc_gsi_handler()
kvm_piix3_setup_irq_routing() -> kvm_pc_setup_irq_routing()
This is in preparation for other users, namely q35 at this time.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
CPUArchState is no longer needed.
Move the declaration to include/qemu/cpu.h and add documentation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Prepares for using a link<> property to connect APIC with CPU and for
changing the CPU APIs to CPUState.
Resolve Coding Style warnings by moving the closing parenthesis of
foreach_apic() macro to next line.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
pci-assign only uses a subset of the flexibility msi_get_message()
provides, but it's still worthwhile to use it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Replace open coded version
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
There is no need to open-code the choice between a file descriptor
number or a named one. Just use monitor_handle_fd_param, which
also takes care of printing the error message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
This adds PCI device assignment for i386 targets using the classic KVM
interfaces. This version is 100% identical to what is being maintained
in qemu-kvm for several years and is supported by libvirt as well. It is
expected to remain relevant for another couple of years until kernels
without full-features and performance-wise equivalent VFIO support are
obsolete.
A refactoring to-do that should be done in-tree is to model MSI and
MSI-X support via the generic PCI layer, similar to what VFIO is already
doing for MSI-X. This should improve the correctness and clean up the
code from duplicate logic.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
0cdd3d1444 fixed reading back the counter load time from the kernel
while assuming the kernel would always update its load time on writing
the state. That is only true for channel 1, and so pit_get_channel_info
returned wrong output pin states for high counter values.
Fix this by applying the offset also on kvm_pit_put. Now we also need to
update the offset when we write the state while the VM is stopped as it
keeps on changing in that state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
To prepare the final fix for clock calibration issues with the in-kernel
PIT, we want to cache the offset between vmclock and the clock used by
the in-kernel PIT. So far, we only need to update it when the VM state
changes between running and stopped because we only read the in-kernel
PIT state while the VM is running.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Rename the function kvm_irqchip_set_irq() to kvm_set_irq(),
since it can be used for sending (asynchronous) interrupts whether
there is a full irqchip model in the kernel or not. (We don't
include 'async' in the function name since asynchronous is the
normal case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Due to a offset between the clock used to generate the in-kernel
count_load_time (CLOCK_MONOTONIC) and the clock used for processing this
in userspace (vm_clock), reading back the output of PIT channel 2 via
port 0x61 was broken. One use cases that suffered from it was the CPU
frequency calibration of SeaBIOS, which also affected IDE/AHCI timeouts.
This fixes it by calibrating the offset between both clocks on
kvm_pit_get and adjusting the kernel value before saving it in the
userspace state. As the calibration only works while the vm_clock is
running, we cache the in-kernel state across stopped phases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
kvm_put_apic_state's attempt to clear *kapic before setting its
bits cleared sizeof(void*) bytes (no more than 8) rather than the
intended 1024 (KVM_APIC_REG_SIZE) bytes. Spotted by coverity.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Catch writes to the MSI MMIO region in the KVM APIC and forward them to
the kernel. Provide the kernel support GSI routing, this allows to
enable MSI support also for in-kernel irqchip mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Often when a guest is stopped from the qemu console, it will report spurious
soft lockup warnings on resume. There are kernel patches being discussed that
will give the host the ability to tell the guest that it is being stopped and
should ignore the soft lockup warning that generates. This patch uses the qemu
Notifier system to tell the guest it is about to be stopped.
Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Scripted conversion:
for file in hw/apic.h hw/kvm/apic.c hw/kvmvapic.c hw/pc.c hw/vmport.c hw/xen_machine_pv.c; do
sed -i "s/CPUState/CPUX86State/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Currently, the "kvmclock" type is only registered when kvm_enabled().
This breaks when moving type registration to before command line
parsing (so that QOM types can be used for CPU and machine).
Since the QOM classes are lazy-initialized anyway and kvmclock_create()
has another kvm_enabled() check, simply drop the KVM check in
kvmclock_register_types().
kvm-i8259, kvm-apic and kvm-ioapic do not suffer from such a check.
Reviewed-by: please.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This provides the required user space stubs to enable the in-kernel
i8254 emulation of KVM.
The in-kernel model supports lost tick compensation according to the
"delay" policy. This is enabled by default and can be switched off via a
device property.
Depending on the feature set of the host kernel (before 2.6.32), we may
have to disable the HPET or lack sound output from the PC speaker.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
|
|
This enables acceleration for MMIO-based TPR registers accesses of
32-bit Windows guest systems. It is mostly useful with KVM enabled,
either on older Intel CPUs (without flexpriority feature, can also be
manually disabled for testing) or any current AMD processor.
The approach introduced here is derived from the original version of
qemu-kvm. It was refactored, documented, and extended by support for
user space APIC emulation, both with and without KVM acceleration. The
VMState format was kept compatible, so was the ABI to the option ROM
that implements the guest-side para-virtualized driver service. This
enables seamless migration from qemu-kvm to upstream or, one day,
between KVM and TCG mode.
The basic concept goes like this:
- VAPIC PV interface consisting of I/O port 0x7e and (for KVM in-kernel
irqchip) a vmcall hypercall is registered
- VAPIC option ROM is loaded into guest
- option ROM activates TPR MMIO access reporting via port 0x7e
- TPR accesses are trapped and patched in the guest to call into option
ROM instead, VAPIC support is enabled
- option ROM TPR helpers track state in memory and invoke hypercall to
poll for pending IRQs if required
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
When an input line is handled as level-triggered, it will immediately
raise an IRQ on the output of a PIC again that goes through an init
reset. So only clear the edge-triggered inputs from IRR in that
scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
KVM APIC and PIC require instance sizes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This introduces the KVM-accelerated IOAPIC model 'kvm-ioapic' and
extends the IRQ routing setup by the 0->2 redirection when needed.
The kvm-ioapic model has a property that allows to define its GSI base
for injecting interrupts into the kernel model. This will allow to
disentangle PIC and IOAPIC pins for chipsets that support more
sophisticated IRQ routes than the PIIX3. So far the base is kept at 0,
i.e. PIC and IOAPIC share pins 0..15.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
|
|
Introduce the alternative 'kvm-i8259' device model that exploits KVM
in-kernel acceleration.
The PIIX3 initialization code is furthermore extended by KVM specific
IRQ route setup. GSI injection differs in KVM mode from the user space
model. As we can dispatch ISA-range IRQs to both IOAPIC and PIC inside
the kernel, we do not need to inject them separately. This is reflected
by a KVM-specific GSI handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
|
|
This introduces the alternative APIC device which makes use of KVM's
in-kernel device model. External NMI injection via LINT1 is emulated by
checking the current state of the in-kernel APIC, only injecting a NMI
into the VCPU if LINT1 is unmasked and configured to DM_NMI.
MSI is not yet supported, so we disable this when the in-kernel model is
in use.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
|
|
More KVM-specific devices will come, so let's start with moving the
kvmclock into a dedicated folder.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
|
