aboutsummaryrefslogtreecommitdiff
path: root/hw/isa
AgeCommit message (Collapse)Author
2023-12-29hw/isa: Constify VMStateRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-38-richard.henderson@linaro.org>
2023-11-28hw/audio/via-ac97: Route interrupts using via_isa_set_irq()BALATON Zoltan
This device is a function of VIA south bridge and should allow setting interrupt routing within that chip. This is implemented in via_isa_set_irq(). Fixes: eb604411a78b82c468e2b8d81a9401eb8b9c7658 Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-ID: <5329840e4be6dd8ae143d07cbfe61d8d2d106654.1701035944.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-28hw/isa/vt82c686: Route PIRQ inputs using via_isa_set_irq()BALATON Zoltan
The chip has 4 pins (called PIRQA-D in VT82C686B and PINTA-D in VT8231) that are meant to be connected to PCI IRQ lines and allow routing PCI interrupts to the ISA PIC. Route these in via_isa_set_irq() to make it possible to share them with internal functions that can also be routed to the same ISA IRQs. Fixes: 2fdadd02e675caca4aba4ae26317701fe2c4c901 Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-ID: <8c4513d8b78fac40e6d4e65a0a4b3a7f2f278a4b.1701035944.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-28hw/isa/vt82c686: Bring back via_isa_set_irq()BALATON Zoltan
The VIA integrated south bridge chips combine several functions and allow routing their interrupts to any of the ISA IRQs also allowing multiple sources to share the same ISA IRQ. E.g. pegasos2 firmware configures everything to use IRQ 9 but amigaone routes them to separate ISA IRQs so the current simplified routing does not work. Bring back via_isa_set_irq() and change it to take the component that wants to change an IRQ and keep track of interrupt status of each source separately and do the mapping to ISA IRQ within the ISA bridge. This may not handle cases when an ISA IRQ is controlled by devices directly, not going through via_isa_set_irq() such as serial, parallel or keyboard but these IRQs being conventionally fixed are not likely to be change by guests or share with other devices so this does not cause a problem in practice. This reverts commit 4e5a20b6da9b1f6d2e9621ed7eb8b239560104ae. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-ID: <1c3902d4166234bef0a476026441eaac3dd6cda5.1701035944.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-07hw/isa/i82378: Propagate error if PC_SPEAKER device creation failedPhilippe Mathieu-Daudé
In commit 40f8214fcd ("hw/audio/pcspk: Inline pcspk_init()") we neglected to give a change to the caller to handle failed device creation cleanly. Respect the caller API contract and propagate the error if creating the PC_SPEAKER device ever failed. This avoid yet another bad API use to be taken as example and copy / pasted all over the code base. Reported-by: Bernhard Beschow <shentey@gmail.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20231020171509.87839-5-philmd@linaro.org>
2023-10-23Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi
into staging virtio,pc,pci: features, cleanups infrastructure for vhost-vdpa shadow work piix south bridge rework reconnect for vhost-user-scsi dummy ACPI QTG DSM for cxl tests, cleanups, fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU # pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd # 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT # ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV # 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa # zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg= # =ILek # -----END PGP SIGNATURE----- # gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits) intel-iommu: Report interrupt remapping faults, fix return value MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section vhost-user: Fix protocol feature bit conflict tests/acpi: Update DSDT.cxl with QTG DSM hw/cxl: Add QTG _DSM support for ACPI0017 device tests/acpi: Allow update of DSDT.cxl hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range vhost-user: fix lost reconnect vhost-user-scsi: start vhost when guest kicks vhost-user-scsi: support reconnect to backend vhost: move and rename the conn retry times vhost-user-common: send get_inflight_fd once hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine hw/isa/piix: Implement multi-process QEMU support also for PIIX4 hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4 hw/isa/piix: Rename functions to be shared for PCI interrupt triggering hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 hw/isa/piix: Share PIIX3's base class with PIIX4 hw/isa/piix: Harmonize names of reset control memory regions ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-22hw/isa/piix: Implement multi-process QEMU support also for PIIX4Bernhard Beschow
So far multi-process QEMU was only implemented for PIIX3. Move the support into the base class to achieve feature parity between both device models. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-29-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiringBernhard Beschow
Now that both PIIX3 and PIIX4 use piix_set_irq() to trigger PCI IRQs the wiring in the respective realize methods can be shared, too. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-28-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4Bernhard Beschow
Speeds up PIIX4 which resolves an old TODO. Also makes PIIX4 compatible with Xen which relies on pci_bus_fire_intx_routing_notifier() to be fired. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-27-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Rename functions to be shared for PCI interrupt triggeringBernhard Beschow
PIIX4 will get the same optimizations which are already implemented for PIIX3. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-26-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4Bernhard Beschow
Resolves duplicate code. Also makes PIIX4 respect the PIIX3 properties which get added, too. This allows for using PIIX4 in the PC machine. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-25-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Share PIIX3's base class with PIIX4Bernhard Beschow
Having a common base class will allow for futher code sharing between PIIX3 and PIIX4. Moreover, it makes PIIX4 implement the acpi-dev-aml-interface. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-24-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Harmonize names of reset control memory regionsBernhard Beschow
There is no need for having different names here. Having the same name further allows code to be shared between PIIX3 and PIIX4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-23-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Allow for optional PIT creation in PIIX3Bernhard Beschow
In the PC machine, the PIT is created in board code to allow it to be virtualized with various virtualization techniques. So explicitly disable its creation in the PC machine via a property which defaults to enabled. Once the PIIX implementations are consolidated this default will keep Malta working without further ado. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-22-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix: Allow for optional PIC creation in PIIX3Bernhard Beschow
In the PC machine, the PIC is created in board code to allow it to be virtualized with various virtualization techniques. So explicitly disable its creation in the PC machine via a property which defaults to enabled. Once the PIIX implementations are consolidated this default will keep Malta working without further ado. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-21-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Merge hw/isa/piix4.cBernhard Beschow
Now that the PIIX3 and PIIX4 device models are sufficiently prepared, their implementations can be merged into one file for further consolidation. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-20-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix4: Reuse struct PIIXState from PIIX3Bernhard Beschow
PIIX4 has its own, private PIIX4State structure. PIIX3 has almost the same structure, provided in a public header. So reuse it and add a cpu_intr attribute to it which is only used by PIIX4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-19-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix4: Rename reset control operations to match PIIX3Bernhard Beschow
Both implementations are the same and will be shared upon merging. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-18-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix4: Rename "isa" attribute to "isa_irqs_in"Bernhard Beschow
Rename the "isa" attribute to align it with PIIX3 for consolidation. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-17-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix4: Remove unused inbound ISA interrupt linesBernhard Beschow
The Malta board, which is the only user of PIIX4, doesn't connect to the exported interrupt lines. PIIX3 doesn't expose such interrupt lines either, so remove them for PIIX4 for simplicity and consistency. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-16-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Drop the "3" from PIIX base class nameBernhard Beschow
TYPE_PIIX3_PCI_DEVICE was the former base class of the Xen and non-Xen variants of the PIIX3 ISA device models. It will become the base class for the PIIX3 and PIIX4 device models, so drop the "3" from the type names. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-15-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Create power management controller in host deviceBernhard Beschow
The power management controller is an integral part of PIIX3 (function 3). So create it as part of the south bridge. Note that the ACPI function is optional in QEMU. This is why it gets object_initialize_child()'ed in realize rather than in instance_init. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-14-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Create USB controller in host deviceBernhard Beschow
The USB controller is an integral part of PIIX3 (function 2). So create it as part of the south bridge. Note that the USB function is optional in QEMU. This is why it gets object_initialize_child()'ed in realize rather than in instance_init. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-13-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Create IDE controller in host deviceBernhard Beschow
The IDE controller is an integral part of PIIX3 (function 1). So create it as part of the south bridge. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-12-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/i386/pc: Wire RTC ISA IRQs in south bridgesBernhard Beschow
Makes the south bridges a bit more self-contained and aligns PIIX3 more with PIIX4. The latter is needed for consolidating the PIIX south bridges. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-11-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Wire PIC IRQs to ISA bus in host deviceBernhard Beschow
Thie PIIX3 south bridge implements both the PIC and the ISA bus, so wiring the interrupts there makes the device model more self-contained. Furthermore, this allows the ISA interrupts to be wired to internal child devices in pci_piix3_realize() which will be performed in subsequent patches. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-10-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/i386/pc_q35: Wire ICH9 LPC function's interrupts before its realize()Bernhard Beschow
When the board assigns the ISA IRQs after the device's realize(), internal devices such as the RTC can't be wired in ich9_lpc_realize() since the qemu_irqs are still NULL. Fix that by assigning the ISA interrupts before realize(). This change is necessary for PIIX consolidation because PIIX4 wires the RTC interrupts in its realize() method, so PIIX3 needs to do so as well. Since the PC and Q35 boards share RTC code, and since PIIX3 needs the change, ICH9 needs to be adapted as well. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-9-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Rename "pic" attribute to "isa_irqs_in"Bernhard Beschow
TYPE_PIIX3_DEVICE doesn't instantiate a PIC since it relies on the board to do so. The "pic" attribute, however, suggests that there is one. Rename the attribute to reflect that it represents ISA interrupt lines. Use the same naming convention as in the VIA south bridges as well as in TYPE_I82378. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-8-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/i386/pc_piix: Wire PIIX3's ISA interrupts by new "isa-irqs" propertyBernhard Beschow
Avoid assigning the private member of struct PIIX3State from outside which goes against best QOM practices. Instead, implement best QOM practice by adding an "isa-irqs" array property to TYPE_PIIX3_DEVICE and assign it in board code, i.e. from outside. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20231007123843.127151-6-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22hw/isa/piix3: Resolve redundant PIIX_NUM_PIC_IRQSBernhard Beschow
PIIX_NUM_PIC_IRQS is assumed to be the same as ISA_NUM_IRQS, otherwise inconsistencies can occur. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231007123843.127151-5-shentey@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-19hw/isa: Realize ISA bridge device before accessing itPhilippe Mathieu-Daudé
qbus_new() should not be called on unrealized device. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231019071611.98885-9-philmd@linaro.org>
2023-10-19hw/audio/pcspk: Inline pcspk_init()Philippe Mathieu-Daudé
pcspk_init() is a legacy init function, inline and remove it. Since the device is realized using &error_fatal, use the same error for setting the "pit" link. Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20231019073307.99608-1-philmd@linaro.org>
2023-10-04hw/acpi/acpi_dev_interface: Remove now unused madt_cpu virtual methodBernhard Beschow
This virtual method was always set to the x86-specific pc_madt_cpu_entry(), even in piix4 which is also used in MIPS. The previous changes use pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped. Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub in hw/acpi/acpi-x86-stub can be removed as well. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230908084234.17642-4-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/isa/ich9: Add comment on imperfect emulation of PIC vs. I/O APIC routingDavid Woodhouse
As noted in the comment, the PCI INTx lines are supposed to be routed to *both* the PIC and the I/O APIC. It's just that we don't cope with the concept of an IRQ being asserted to two *different* pins on the two irqchips. So we have this hack of routing to I/O APIC only if the PIRQ routing to the PIC is disabled. Which seems to work well enough, even when I try hard to break it with kexec. But should be explicitly documented and understood. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <112a09643b8191c4eae7d92fa247a861ab90a9ee.camel@infradead.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-11hw/isa/vt82c686: Remove via_isa_set_irq()Bernhard Beschow
Now that via_isa_set_irq() is unused it can be removed. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230531211043.41724-4-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-11hw/ide/via: Wire up IDE legacy interrupts in host deviceBernhard Beschow
Resolves circular depencency between IDE function and south bridge. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230531211043.41724-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-13hw/char/parallel-isa: Export struct ISAParallelStateBernhard Beschow
Allows the struct to be embedded directly into device models without additional allocation. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230612081238.1742-3-shentey@gmail.com> [PMD: Update MAINTAINERS entry and use SPDX license identifier] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-07hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICEBernhard Beschow
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of TYPE_PIIX3_DEVICE. Remove this redundancy. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-7-shentey@gmail.com> Message-Id: <20230403074124.3925-8-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Resolve redundant k->config_write assignmentsBernhard Beschow
The previous patch unified handling of piix3_write_config() accross the PIIX3 device models which allows for assigning k->config_write once in the base class. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-6-shentey@gmail.com> Message-Id: <20230403074124.3925-7-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config()Bernhard Beschow
Subscribe to pci_bus_fire_intx_routing_notifier() instead which allows for having a common piix3_write_config() for the PIIX3 device models. While at it, move the subscription into machine code to facilitate resolving TYPE_PIIX3_XEN_DEVICE. In a possible future followup, pci_bus_fire_intx_routing_notifier() could be adjusted in such a way that subscribing to it doesn't require knowledge of the device firing it. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-5-shentey@gmail.com> Message-Id: <20230403074124.3925-6-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3Bernhard Beschow
xen_intx_set_irq() doesn't depend on PIIX3State. In order to resolve TYPE_PIIX3_XEN_DEVICE and in order to make Xen agnostic about the precise south bridge being used, set up Xen's PCI IRQ handling of PIIX3 in the board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-4-shentey@gmail.com> Message-Id: <20230403074124.3925-5-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize()Bernhard Beschow
This is a preparational patch for the next one to make the following more obvious: First, pci_bus_irqs() is now called twice in case of Xen where the second call overrides the pci_set_irq_fn with the Xen variant. Second, pci_bus_set_route_irq_fn() is now also called in Xen mode. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-3-shentey@gmail.com> Message-Id: <20230403074124.3925-4-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()Bernhard Beschow
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device while xen_piix3_set_irq() maps multiple PCI devices to their respective IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate this. Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's IOAPIC rather than PIIX has this many interrupt routes. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-2-shentey@gmail.com> Message-Id: <20230403074124.3925-2-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-05hw/isa/i82378: Remove unused "io" attributeBernhard Beschow
The attribute isn't used since commit 5c9736789b79ea49cd236ac326f0a414f63b1015 "i82378: Cleanup implementation". Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230523195608.125820-4-shentey@gmail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-05-22hw/char/parallel: Move TYPE_ISA_PARALLEL to the header fileThomas Huth
We are going to require the macro from other files, too, so move this #define to the header file. Message-Id: <20230512124033.502654-9-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-19hw/i386/pc: Create RTC controllers in south bridgesBernhard Beschow
Just like in the real hardware (and in PIIX4), create the RTC controllers in the south bridges. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230519084734.220480-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-10Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, fixes Several features that landed at the last possible moment: Passthrough HDM decoder emulation Refactor cryptodev RAS error emulation and injection acpi-index support on non-hotpluggable slots Dynamically switch to vhost shadow virtqueues at vdpa net migration Plus a couple of bugfixes that look important to have in the release. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR # j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX # oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21 # tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU # gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a # wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY= # =e1yv # -----END PGP SIGNATURE----- # gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits) virtio: fix reachable assertion due to stale value of cached region size hw/virtio/vhost-user: avoid using unitialized errp hw/pxb-cxl: Support passthrough HDM Decoders unless overridden hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers hw/mem/cxl_type3: Add CXL RAS Error Injection Support. hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use. hw/cxl: Fix endian issues in CXL RAS capability defaults / masks hw/mem/cxl-type3: Add AER extended capability hw/pci-bridge/cxl_root_port: Wire up MSI hw/pci-bridge/cxl_root_port: Wire up AER hw/pci/aer: Add missing routing for AER errors hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback pcihp: move fields enabling hotplug into AcpiPciHpState acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices() acpi: pci: move BSEL into build_append_pcihp_slots() acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable pci: move acpi-index uniqueness check to generic PCI device code tests: acpi: update expected blobs tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-08hw/audio/via-ac97: Basic implementation of audio playbackBALATON Zoltan
Add basic implementation of the AC'97 sound part used in VIA south bridge chips. Not all features of the device is emulated, only one playback channel is supported for now but this is enough to get sound output from some guests using this device on pegasos2. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <63b99410895312f40e7be479f581da0805e605a1.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/isa/vt82c686: Implement PCI IRQ routingBALATON Zoltan
The real VIA south bridges implement a PCI IRQ router which is configured by the BIOS or the OS. In order to respect these configurations, QEMU needs to implement it as well. The real chip may allow routing IRQs from internal functions independently of PCI interrupts but since guests usually configute it to a single shared interrupt we don't model that here for simplicity. Note: The implementation was taken from piix4_set_irq() in hw/isa/piix4. Suggested-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <fbb016c7d0e19093335c237e15f5f6c62c4393b4.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-17 17:02:11 +0000