aboutsummaryrefslogtreecommitdiff
path: root/hw/isa
AgeCommit message (Collapse)Author
2023-01-13hw/usb/hcd-uhci: Introduce TYPE_ defines for device modelsBernhard Beschow
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221204190553.3274-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specificBernhard Beschow
pci_map_irq_fn's in general seem to be board-specific, and PIIX4's pci_slot_get_pirq() in particular seems very Malta-specific. So move the latter to malta.c to 1/ keep the board logic in one place and 2/ avoid PIIX4 to make assumptions about its board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230109172347.1830-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specificBernhard Beschow
pci_map_irq_fn's in general seem to be board-specific. So move PIIX3's pci_slot_get_pirq() to board code to not have PIIX3 make assuptions about its board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230109172347.1830-6-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()Bernhard Beschow
pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and pci_map_irq_fn to a PCI bus. This coupling gets in the way when the pci_map_irq_fn is board-specific while the pci_set_irq_fn is device- specific. For example, both of QEMU's PIIX south bridge models have different pci_map_irq_fn implementations which are board-specific rather than device-specific. These implementations should therefore reside in board code. The pci_set_irq_fn's, however, should stay in the device models because they access memory internal to the model. Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the assignments to be decoupled, resolving the problem described above. Note also how pci_vpb_realize() which gets touched in this commit assigns different pci_map_irq_fn's depending on the board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230109172347.1830-5-shentey@gmail.com> [PMD: Factor out in vfu_object_set_bus_irq()] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/isa/piix4: Correct IRQRC[A:D] reset valuesPhilippe Mathieu-Daudé
IRQRC[A:D] registers reset value is 0x80. We were forcing the MIPS Malta machine routing to be able to boot a Linux kernel without any bootloader. We now have these registers initialized in the Malta machine write_bootloader(), so we can use the correct reset values. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221027204720.33611-4-philmd@linaro.org>
2023-01-08include/hw/pci: Split pci_device.h off pci.hMarkus Armbruster
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the header don't actually need them. Similar structs live in their own headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h, PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and PCIESlot in pcie_port.h. Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with the code that needs them. Adjust include directives. This also enables the next commit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-6-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08hw/isa/Kconfig: Add missing dependency to VT82C686Bernhard Beschow
The ACPIREGS are provided by TYPE_VIA_PM, so needs to select ACPI. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221216130355.41667-6-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-08hw/acpi/Kconfig: Add missing dependencies to ACPI_ICH9Bernhard Beschow
ich9_lpc_realize() uses apm_init() and ich9_smbus_realize() uses pm_smbus_init(), so both APM and ACPI_SMBUS are provided by the device models managed by ACPI_ICH9. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221216130355.41667-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08hw/acpi/Kconfig: Rename ACPI_X86_ICH to ACPI_ICH9Bernhard Beschow
Although the ICH9 ACPI controller may currently be tied to x86 it doesn't have to. Furthermore, the source files this configuration switch manages contain a '9', so this name fits more. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221216130355.41667-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21hw/isa: enable TCO watchdog reboot pin strap by defaultDaniel P. Berrangé
The TCO watchdog implementation default behaviour from POV of the guest OS relies on the initial values for two I/O ports: * TCO1_CNT == 0x0 Since bit 11 (TCO Timer Halt) is clear, the watchdog state is considered to be initially running * GCS == 0x20 Since bit 5 (No Reboot) is set, the watchdog will not trigger when the timer expires This is a safe default, because the No Reboot bit will prevent the watchdog from triggering if the guest OS is unaware of its existance, or is slow in configuring it. When a Linux guest initializes the TCO watchdog, it will attempt to clear the "No Reboot" flag, and read the value back. If the clear was honoured, the driver will treat this as an indicator that the watchdog is functional and create the guest watchdog device. QEMU implements a second "no reboot" flag, however, via pin straps which overrides the behaviour of the guest controlled "no reboot" flag: commit 5add35bec1e249bb5345a47008c8f298d4760be4 Author: Paulo Alcantara <pcacjr@gmail.com> Date: Sun Jun 28 14:58:58 2015 -0300 ich9: implement strap SPKR pin logic This second 'noreboot' pin was defaulted to high, which also inhibits triggering of the requested watchdog actions, unless QEMU is launched with the magic flag "-global ICH9-LPC.noreboot=false". This is a bad default as we are exposing a watchdog to every guest OS using the q35 machine type, but preventing it from actually doing what it is designed to do. What is worse is that the guest OS and its apps have no way to know that the watchdog is never going to fire, due to this second 'noreboot' pin. If a guest OS had no watchdog device at all, then apps whose operation and/or data integrity relies on a watchdog can refuse to launch, and alert the administrator of the problematic deployment. With Q35 machines unconditionally exposing a watchdog though, apps will think their deployment is correct but in fact have no protection at all. This patch flips the default of the second 'no reboot' flag, so that configured watchdog actions will be honoured out of the box for the 7.2 Q35 machine type onwards, if the guest enables use of the watchdog. See also related bug reports https://bugzilla.redhat.com/show_bug.cgi?id=2080207 https://bugzilla.redhat.com/show_bug.cgi?id=2136889 https://bugzilla.redhat.com/show_bug.cgi?id=2137346 Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221216125749.596075-5-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21hw/isa: add trace events for ICH9 LPC chip config accessDaniel P. Berrangé
These tracepoints aid in understanding and debugging the guest drivers for the TCO watchdog. Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221216125749.596075-3-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-22acpi: x86: move RPQx field back to _SB scopeIgor Mammedov
Commit 47a373faa6b2 (acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML) moved ISA bridge AML generation to respective devices and was using aml_alias() to provide PRQx fields in _SB. scope. However, it turned out that SeaBIOS was not able to process Alias opcode when parsing DSDT, resulting in lack of keyboard during boot (SeaBIOS console, grub, FreeDOS). While fix for SeaBIOS is posted https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/RGPL7HESH5U5JRLEO6FP77CZVHZK5J65/ fixed SeaBIOS might not make into QEMU-7.2 in time. Hence this workaround that puts PRQx back into _SB scope and gets rid of aliases in ISA bridge description, so DSDT will be parsable by broken SeaBIOS. That brings back hardcoded references to ISA bridge PCI0.S08.P40C/PCI0.SF8.PIRQ where middle part now is auto generated based on slot it's plugged in, but it should be fine as bridge initialization also hardcodes PCI address of the bridge so it can't ever move. Once QEMU tree has fixed SeaBIOS blob, we should be able to drop this part and revert back to alias based approach Reported-by: Volker Rümelin <vr_qemu@t-online.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221121153613.3972225-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ↵Igor Mammedov
ennumeration generate AML PCI-ISA bridges that are built in PIIX/Q35 are building its own AML using AcpiDevAmlIf interface. Now build_append_pci_bus_devices() gained AcpiDevAmlIf interface support to get AML of devices atached to PCI slots. So drop ad-hoc build_q35_isa_bridge()/build_piix4_isa_bridge() and let PCI bus enumeration to include PCI-ISA bridge AML when it's enumerated by build_append_pci_bus_devices(). AML change is mostly contextual, which moves whole ISA hierarchy directly under PCI host bridge instead of it being described as separate \SB.PCI0.ISA block. Note: If bus/slot that hosts ISA bridge has BSEL set, it will gain new ASUN and _DMS entries (i.e. acpi-index support, but it should not cause any functional change and that is fine from PCI Firmware spec point of view), potentially it's possible to suppress that by adding a flag to PCIDevice but I don't see a reason to do that yet, I'd rather treat bridge just as any other PCI device if it's possible. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221017102146.2254096-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-31hw/isa/piix4: Move pci_ide_create_devs() call to board codeBernhard Beschow
For the VIA south bridges there was a comment to have the call in board code. Move it there for PIIX4 as well for consistency. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-29-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix4: Add missing initializationBernhard Beschow
PIIX3 clears its reset control register, so do the same in PIIX4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221022150508.26830-28-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/Kconfig: Fix dependencies of piix4 southbridgeBernhard Beschow
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221022150508.26830-27-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix3: Remove unused includeBernhard Beschow
Ammends commit 988fb613215993dd0ce642b89ca8182c479d39dd. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221022150508.26830-19-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/ide/piix: Introduce TYPE_ macros for PIIX IDE controllersBernhard Beschow
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221022150508.26830-9-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix4: Rename wrongly named methodBernhard Beschow
This method post-loads the southbridge, not the IDE device. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix3: Prefer pci_address_space() over get_system_memory()Bernhard Beschow
get_system_memory() accesses global state while pci_address_space() uses whatever has been passed to the device instance, so avoid the global. Moreover, PIIX4 uses pci_address_space() here as well. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix3: Modernize reset handlingBernhard Beschow
Rather than registering the reset handler via a function which appends the handler to a global list, prefer to implement it as a virtual method - PIIX4 does the same already. Note that this means that piix3_reset can now also be called writing to the relevant configuration space register on a PCI bridge. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-6-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix3: Add size constraints to rcr_opsBernhard Beschow
According to the PIIX3 datasheet, the reset control register is one byte in size. Moreover, PIIX4 has it, so add it to PIIX3 as well. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-5-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/piix3: Remove extra ';' outside of functionsBernhard Beschow
Fixes the "extra-semi" clang-tidy check. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-4-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/i386/pc: Create DMA controllers in south bridgesBernhard Beschow
Just like in the real hardware (and in PIIX4), create the DMA controllers in the south bridges. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/vt82c686: Create rtc-time alias in boards insteadBernhard Beschow
According to good QOM practice, an object should only deal with objects of its own sub tree. Having devices create an alias on the machine object doesn't respect this good practice. To resolve this, create the alias in the machine's code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220901114127.53914-14-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Embed RTCState in host deviceBernhard Beschow
Embed the rtc in the host device, analoguous to the other child devices and analoguous to PIIX4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220901114127.53914-13-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Instantiate AC97 and MC97 functions in host deviceBernhard Beschow
The AC97 function's wakeup status is wired to the PM function and both the AC97 and MC97 interrupt routing is determined by the ISA function. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220901114127.53914-11-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Instantiate PM function in host deviceBernhard Beschow
The PM controller has activity bits which monitor activity of other built-in devices in the host device. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220901114127.53914-10-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Instantiate USB functions in host deviceBernhard Beschow
The USB functions can be enabled/disabled through the ISA function. Also its interrupt routing can be influenced there. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220901114127.53914-9-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Instantiate IDE function in host deviceBernhard Beschow
The IDE function is closely tied to the ISA function (e.g. the IDE interrupt routing happens there), so it makes sense that the IDE function is instantiated within the south bridge itself. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220901114127.53914-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Reuse errpBernhard Beschow
Rather than terminating abruptly, make use of the already present errp and propagate the error to the caller. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220901114127.53914-5-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Prefer pci_address_space() over get_system_memory()Bernhard Beschow
Unlike get_system_memory(), pci_address_space() respects the memory tree available to the parent device. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220901114127.53914-4-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Resolve unneeded attributeBernhard Beschow
Now that also the super io device is realized in the common realize method, the isa_bus attribute can be turned into a temporary. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220901114127.53914-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-31hw/isa/vt82c686: Resolve chip-specific realize methodsBernhard Beschow
The object creation now happens in chip-specific init methods which allows the realize methods to be consolidated into one method. Shifting the logic into the init methods has the addidional advantage that the parent object's init methods are called implicitly - like constructors in object-oriented languages. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220901114127.53914-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-29hw/i386/xen/xen-hvm: Inline xen_piix_pci_write_config_client() and remove itBernhard Beschow
xen_piix_pci_write_config_client() is implemented in the xen sub tree and uses PIIX constants internally, thus creating a direct dependency on PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of xen_piix_pci_write_config_client() can be moved to PIIX which resolves the dependency. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20220626094656.15673-3-shentey@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-11hw/isa/piix3: Inline and remove piix3_create()Bernhard Beschow
During the previous changesets piix3_create() became a trivial wrapper around more generic functions. Modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-12-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix3: Factor out ISABus retrieval from piix3_create()Bernhard Beschow
Modernizes the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-11-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix3: QOM'ify PCI device creation and wiringBernhard Beschow
PCI interrupt wiring was performed in create() functions which are obsolete. Move these tasks into QOM functions to modernize the code. In order to avoid duplicate checking for xen_enabled() the realize methods are now split. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-10-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix3: Move pci_map_irq_fn near pci_set_irq_fnBernhard Beschow
The pci_map_irq_fn was implemented below type_init() which made it inaccessible to QOM functions. So move it up. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-9-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Inline and remove piix4_create()Bernhard Beschow
During the previous changesets piix4_create() became a trivial wrapper around more generic functions. Modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: QOM'ify PIIX4 PM creationBernhard Beschow
Just like the real hardware, create the PIIX4 ACPI controller as part of the PIIX4 southbridge. This also mirrors how the IDE and USB functions are already created. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-7-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Factor out ISABus retrieval from piix4_create()Bernhard Beschow
Modernizes the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-6-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: QOM'ify PCI device creation and wiringBernhard Beschow
PCI interrupt wiring and device creation were performed in create() functions which are obsolete. Move these tasks into QOM functions to modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-5-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Move pci_map_irq_fn' near pci_set_irq_fnBernhard Beschow
The pci_map_irq_fn was implemented below type_init() which made it inaccessible to QOM functions. So move it up. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-4-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Use object_initialize_child() for embedded structBernhard Beschow
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/southbridge/piix: Aggregate all PIIX southbridge type namesBernhard Beschow
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining ones, too. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4.c: create PIIX4_PM device directly instead of using ↵Mark Cave-Ayland
piix4_pm_initfn() Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM device can be instantiated directly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-12-mark.cave-ayland@ilande.co.uk> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: use qdev gpio to wire up smi_irqMark Cave-Ayland
Initialize the SMI IRQ in piix4_pm_init(). The smi_irq can now be wired up directly using a qdev gpio instead of having to set the IRQ externally in piix4_pm_initfn(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-10-mark.cave-ayland@ilande.co.uk> [PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk] Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: use qdev gpio to wire up sci_irqMark Cave-Ayland
Introduce piix4_pm_init() instance init function and use it to initialise the separate qdev gpio for the SCI IRQ. The sci_irq can now be wired up directly using a qdev gpio instead of having to set the IRQ externally in piix4_pm_initfn(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-9-mark.cave-ayland@ilande.co.uk> [PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk] Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: rename piix4_pm_init() to piix4_pm_initfn()Mark Cave-Ayland
When QOMifying a device it is typical to use _init() as the suffix for an instance_init function, however this name is already in use by the legacy piix4_pm_init() wrapper function. Eventually the wrapper function will be removed, but for now rename it to piix4_pm_initfn() to avoid a naming collision. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 08:27:02 +0000