aboutsummaryrefslogtreecommitdiff
path: root/hw/ipmi/ipmi_bmc_sim.c
AgeCommit message (Collapse)Author
2016-11-01ipmi_bmc_sim: Remove an unnecessary mutexCorey Minyard
Get rid of the unnecessary mutex, it was a vestige of something else that was not done. That way we don't have to free it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi: Remove hotplug from IPMI BMCsCorey Minyard
No hotplug support, make sure it doesn't happen. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-23vl: Switch qemu_uuid to QemuUUIDFam Zheng
Update all qemu_uuid users as well, especially get rid of the duplicated low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API. Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to QemuUUID is done here too to keep everything in sync and avoid code churn. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-03-11ipmi: add some local variables in ipmi_sdr_initCédric Le Goater
This patch adds a couple of variables to manipulate the raw sdr entries. The const attribute is also removed on init_sdrs. This will ease the introduction of a sdr loader using a file. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: remove the need of an ending record in the SDR tableCédric Le Goater
Currently, the code initializing the sdr table relies on an ending record with a recid of 0xffff. This patch changes the loop to use the sdr size as a breaking condition. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: use a function to initialize the SDR tableCédric Le Goater
This patch moves the code section initializing the sdrs in its own routine to prepare ground for changes in the subsequent patches. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: add a realize function to the device classCédric Le Goater
This will be useful to define and use properties when the object is instantiated. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: add rsp_buffer_set_error() helperCédric Le Goater
The third byte in the response buffer of an IPMI command holds the error code. In many IPMI command handlers, this byte is updated directly. This patch adds a helper routine to clarify why this byte is being used. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: remove IPMI_CHECK_RESERVATION() macroCédric Le Goater
Some IPMI command handlers in the BMC simulator use a macro IPMI_CHECK_RESERVATION() to check a SDR reservation but the macro implicitly uses local variables. This patch simply removes it. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpersCédric Le Goater
The IPMI command handlers in the BMC simulator use a macro IPMI_ADD_RSP_DATA() to push bytes in a response buffer. The macro hides the fact that it implicitly uses variables local to the handler, which is misleading. This patch introduces a simple 'struct RspBuffer' and inlined helper routines to store byte(s) in a response buffer. rsp_buffer_push() replaces the macro IPMI_ADD_RSP_DATA() and rsp_buffer_pushmore() is new helper to push multiple bytes. The latest is used in the command handlers get_msg() and get_sdr() which are manipulating the buffer directly. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: remove IPMI_CHECK_CMD_LEN() macroCédric Le Goater
Most IPMI command handlers in the BMC simulator start with a call to the macro IPMI_CHECK_CMD_LEN() which verifies that a minimal number of arguments expected by the command are indeed available. To achieve this task, the macro implicitly uses local variables which is misleading in the code. This patch adds a 'cmd_len_min' attribute to the struct IPMICmdHandler defining the minimal number of arguments expected by the command and moves this check in the global command handler ipmi_sim_handle_command(). To clarify the checks being done on the received command, the patch introduces a helper ipmi_get_handler(). Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-16ipmi: sensor number should not exceed MAX_SENSORSCédric Le Goater
Fix a number of off-by-ones, one of them spotted by Coverity. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09ipmi_bmc_sim: Add break to correct watchdog NMI checkCorey Minyard
It was falling through when it should have been a break. Found by Coverity. The logic could be simplified a bit with a fallthrough, probably the original thought, but that would be less clear, I think. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Message-Id: <1452519152-6500-3-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09ipmi_bmc_sim: Fix off by one in check.Corey Minyard
Found by Paolo. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Message-Id: <1452519152-6500-2-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-06ipmi: add ACPI power and GUID commandsCédric Le Goater
>From the specs (20.8 Get Device GUID Command), the command needs to return a GUID (Globally Unique ID), or UUID, that should never change over the lifetime of the device. qemu_uuid looked like a good candidate to start with but we could use a specific BMC property also if needed. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: add GET_SYS_RESTART_CAUSE chassis commandCédric Le Goater
This is a simulator. Just return an unknown cause (0). Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: add get and set SENSOR_TYPE commandsCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: introduce a struct ipmi_sdr_compactCédric Le Goater
Currently, sdr attributes are identified using byte offsets and this can be a bit confusing. This patch adds a struct ipmi_sdr_compact conforming to the IPMI specs and replaces byte offsets with names. It also introduces and uses a struct ipmi_sdr_header in sections of the code where no assumption is made on the type of SDR. This leave rooms to potential usage of other types in the future. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: fix SDR length valueCédric Le Goater
The IPMI BMC simulator populates the SDR table with a set of initial SDRs. The length of each SDR is taken from the record itself (byte 4) which does not include the size of the header. But, the full length (header + data) is required by the sdr_add_entry() routine. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: cleanup error_report messagesCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: replace *_MAXCMD definesCédric Le Goater
ARRAY_SIZE() is simple to use and removes the need to pre-define the size of the command arrays. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: replace goto by a return statementCédric Le Goater
Each routine using the IPMI_ADD_RSP_DATA, IPMI_CHECK_CMD_LEN or IPMI_CHECK_RESERVATION macros needs to define a goto label 'out' to handle hidden errors. Using directly a return statement has the same effect and it removes the fact that 'out' needs to be defined. The code exits in ipmi_sim_handle_command() are a little different from the rest and a "possible" error in the macro IPMI_ADD_RSP_DATA is handled before making use of it. This might be a bit excessive as a minimum response len is currently 300 bytes and the patch checks that at least 3 are available. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2015-12-22ipmi: Add migration capability to the IPMI devices.Corey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add a local BMC simulationCorey Minyard
This provides a minimal local BMC, basically enough to comply with the spec and provide a complete watchdog timer (including a sensor, SDR, and event). Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 03:25:25 +0000