aboutsummaryrefslogtreecommitdiff
path: root/hw/intc
AgeCommit message (Collapse)Author
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19dma: do not depend on kvm_enabled()Paolo Bonzini
Memory barriers are needed also by Xen and, when the ioeventfd bugs are fixed, by TCG as well. sysemu/kvm.h is not anymore needed in sysemu/dma.h, move it to the actual users. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19apic: move target-dependent definitions to cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19explicitly include linux/kvm.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-16hw/intc/arm_gic: add tracepointsHollis Blanchard
These are obviously critical to understanding interrupt delivery: gic_enable_irq gic_disable_irq gic_set_irq (inbound irq from device models) gic_update_set_irq (outbound irq to CPU) gic_acknowledge_irq The only one that I think might raise eyebrows is gic_update_bestirq, but I've (sadly) debugged problems that ended up being caused by unexpected priorities. Knowing that the GIC has an irq ready, but doesn't deliver to the CPU due to priority, has also proven important. Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com> Message-id: 1461252281-22399-1-git-send-email-hollis_blanchard@mentor.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-12hw/intc: QOM'ify omap_intc.cxiaoqiang zhao
* Split the old SysBus init into an instance_init and a DeviceClass::realize function * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify grlib_irqmp.cxiaoqiang.zhao
* Split the old SysBus init into an instance_init and a DeviceClass::realize function * Drop the old SysBus init function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: corrected "can not" to "cannot" in error message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify slavio_intctl.cxiaoqiang.zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify pl190.cxiaoqiang.zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify imx_avic.cxiaoqiang.zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify exynos4210_gic.cxiaoqiang.zhao
* Drop the old SysBus init function and use instance_init * Split the exynos4210_irq_gate_init into an instance_init and a DeviceClass::realize function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify exynos4210_combiner.cxiaoqiang.zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12hw/intc: QOM'ify etraxfs_pic.cxiaoqiang.zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16hw/intc: Add (new) ASPEED VIC device modelAndrew Jeffery
Implement a basic ASPEED VIC device model for the AST2400 SoC[1], with enough functionality to boot an aspeed_defconfig Linux kernel. The model implements the 'new' (revised) register set: While the hardware exposes both the new and legacy register sets, accesses to the model's legacy register set will not be serviced (however the access will be logged). [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-3-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-11msi_supported -> msi_nonbrokenMichael S. Tsirkin
Rename controller flag to make it clearer what it means. Add some documentation as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-04hw/intc/arm_gic.c: Implement GICv2 GICC_DIRPeter Maydell
The GICv2 introduces a new CPU interface register GICC_DIR, which allows an OS to split the "priority drop" and "deactivate interrupt" parts of interrupt completion. Implement this register. (Note that the register is at offset 0x1000 in the CPU interface, which means it is on a different 4K page from all the other registers.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1456854176-7813-1-git-send-email-peter.maydell@linaro.org
2016-02-28xics: report errors with the QEMU Error APIGreg Kurz
Using the return value to report errors is error prone: - xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors on 0 - xics_alloc_block() returns the unclear value of ics->offset - 1 on error but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0 This patch adds an errp argument to xics_alloc() and xics_alloc_block() to report errors. The return value of these functions is a valid IRQ number if errp is NULL. It is undefined otherwise. The corresponding error traces get promotted to error messages. Note that the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also moves to xics_alloc(). Similar error message consolidation isn't really applicable to xics_alloc_block() because callers have extra context (device config address, MSI or MSIX). This fixes the issues mentioned above. Based on previous work from Brian W. Hart. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-16all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-03bcm2836_control: add bcm2836 ARM control logicAndrew Baumann
This module is specific to the bcm2836 (Pi2). It implements the top level interrupt controller, and mailboxes used for inter-processor synchronisation. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_ic: add bcm2835 interrupt controllerAndrew Baumann
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-29hw/intc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-27-git-send-email-peter.maydell@linaro.org
2016-01-29arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-29x86: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29unicore: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-9-git-send-email-peter.maydell@linaro.org
2016-01-29sparc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-7-git-send-email-peter.maydell@linaro.org
2016-01-29ppc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2016-01-29lm32: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
2016-01-21arm_gic: Update ID registers based on revisionAlistair Francis
Update the GIC ID registers (registers above 0xfe0) based on the GIC revision instead of using the sames values for all GIC implementations. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Message-id: 629e7fa5d47f2800e51cc1f18d12635f1eece349.1453333840.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13omap: Don't use hw_error() in device init() methodsMarkus Armbruster
Device init() methods aren't supposed to call hw_error(), they should report the error and fail cleanly. Do that. The errors are all device misconfiguration. All callers use qdev_init_nofail(), so this patch merely converts hw_error() crashes into &error_abort crashes. Improvement, because now it crashes closer to where the misconfiguration bug would be, and a few more bad examples of hw_error() use are gone. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1450370121-5768-3-git-send-email-armbru@redhat.com>
2015-12-17kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIPPaolo Bonzini
This patch adds support for split IRQ chip mode. When KVM_CAP_SPLIT_IRQCHIP is enabled: 1.) The PIC, PIT, and IOAPIC are implemented in userspace while the LAPIC is implemented by KVM. 2.) The software IOAPIC delivers interrupts to the KVM LAPIC via kvm_set_irq. Interrupt delivery is configured via the MSI routing table, for which routes are reserved in target-i386/kvm.c then configured in hw/intc/ioapic.c 3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI, which is handled in target-i386/kvm.c and relayed to the software IOAPIC via ioapic_eoi_broadcast. Signed-off-by: Matt Gingell <gingell@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-19hw/arm_gic: Correctly restore nested irq priorityFrançois Baldassari
Upon activating an interrupt, set the corresponding priority bit in the APR/NSAPR registers without touching the currently set bits. In the event of nested interrupts, the GIC will then have the information it needs to restore the priority of the pre-empted interrupt once the higher priority interrupt finishes execution. Signed-off-by: François Baldassari <francois@pebble.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10hw/intc/arm_gic: Remove the definition of NUM_CPUWei Huang
arm_gic.c retrieves CPU number using either NUM_CPU(s) or s->num_cpu. Such mixed-uses make source code inconsistent. This patch removes NUM_CPU(s), which was defined for MPCore tweak long ago, and instead favors s->num_cpu. The source is more consistent after this small tweak. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 1446744293-32365-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03armv7-m: Implement SYSRESETREQMichael Davidsaver
Implement the SYSRESETREQ bit of the AIRCR register for armv7-m (ie. cortex-m3) to trigger a GPIO out. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27i.MX: Standardize i.MX AVIC debugJean-Christophe Dubois
The goal is to have debug code always compiled during build. We standardize all debug output on the following format: [QOM_TYPE_NAME]reporting_function: debug message We also replace IPRINTF with qemu_log_mask(). The qemu_log_mask() output is following the same format as the above debug. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 29885ffea2577eaf2288c1d17fd87ee951748b49.1445781957.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27arm_gic_kvm: Disable live migration if not supportedPavel Fedin
Currently, if the kernel does not have live migration API, the migration will still be attempted, but vGIC save/restore functions will just not do anything. This will result in a broken machine state. This patch fixes the problem by adding migration blocker if kernel API is not supported. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-23openpic: add to misc categoryLaurent Vivier
openpic is a programmable interrupt controller, so add it to the misc category. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-08s/cpu_get_real_ticks/cpu_get_host_ticks/Christopher Covington
This should help clarify the purpose of the function that returns the host system's CPU cycle count. Signed-off-by: Christopher Covington <cov@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> ppc portion Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-02cpu/apic: drop icc bus/bridgeChen Fan
After CPU hotplug has been converted to BUS-less hot-plug infrastructure, the only function ICC bus performs is to propagate reset to LAPICs. However LAPIC could be reset by registering its reset handler after all device are initialized. Do so and drop ~30LOC of not needed anymore ICCBus related code. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02apic: move APIC's MMIO region mapping into APICChen Fan
When ICC bus/bridge is removed, APIC MMIO will be left unmapped since it was mapped into system's address space indirectly by ICC bridge. Fix it by moving mapping into APIC code, so it would be possible to remove ICC bus/bridge code later. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-09-25hmp: implemented io apic dump state for TCGPavel Butsykin
Added support emulator for the hmp command "info ioapic" Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-10-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25hmp: added io apic dump statePavel Butsykin
Added the hmp command to query io apic state, may be usefull after guest crashes to understand IRQ routing in guest. Implementation is only for kvm here. The dump will look like (qemu) info ioapic ioapic id=0x00 sel=0x26 (redir[11]) pin 0 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical pin 1 0x0000000000000031 dest=0 vec=49 active-hi edge fixed physical ... pin 23 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical IRR (none) Remote IRR (none) Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25apic_internal.h: rename ESR_ILLEGAL_ADDRESS to APIC_ESR_ILLEGAL_ADDRESSPavel Butsykin
Added prefix APIC_ for determining the constant of a particular subsystem, improve the overall readability and match other constant names. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25apic_internal.h: make some apic_get_* functions externally visiblePavel Butsykin
Move apic_get_bit(), apic_set_bit() to apic_internal.h, make the apic_get_ppr symbol external. It's necessary to work with isr, tmr, irr and ppr outside hw/intc/apic.c Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25ioapic: fix contents of arbitration registerPaolo Bonzini
The arbitration register should read to the same value as the IOAPIC id register. Fixes kvm-unit-tests ioapic.flat. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 07:10:24 +0000