aboutsummaryrefslogtreecommitdiff
path: root/hw/intc
AgeCommit message (Collapse)Author
2013-06-18intc/xilinx_intc: Dont lower IRQ when HIE clearedPeter Crosthwaite
This is a little strange. It is lowering the parent IRQ pin on input when HIE is cleared. There is no such behaviour in the real hardware. ISR changes based on interrupt pin state are already guarded on HIE being set. So we can just delete this if in its entirety. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-06-18intc/xilinx_intc: Inhibit write to ISR when HIEPeter Crosthwaite
When the Hardware Interrupt Enable (HIE) bit is set, software cannot change ISR. Add write guard accordingly. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-06-18intc/xilinx_intc: Handle level interrupt retriggeringPeter Crosthwaite
Acking a level sensitive interrupt should have no effect if the interrupt pin is still asserted. The current implementation requires and edge condition to occur for setting a level sensitive IRQ, which means an ACK can clear a level sensitive interrupt, until the original source strobes the interrupt again. Fix by keeping track of the interrupt pin state and setting ISR based on this every time update_irq() is called. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-06-18intc/xilinx_intc: Don't clear level sens. IRQs without ACKPeter Crosthwaite
For level sensitive interrupts, ISR bits are cleared when the input pin is lowered. This is incorrect. Only software can clear ISR bits (via IAR or direct write to ISR with !MER(2)). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-06-15Merge branch 'realize-isa.v2' of git://github.com/afaerber/qemu-cpuBlue Swirl
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu: qdev: Drop FROM_QBUS() macro isa: QOM'ify ISADevice isa: QOM'ify ISABus i8259: Convert PICCommonState to use QOM realizefn kvm/i8259: QOM'ify some more i8259: QOM'ify some more i8254: Convert PITCommonState to QOM realizefn kvm/i8254: QOM'ify some more i8254: QOM'ify some more isa: Use realizefn for ISADevice cs4231a: QOM'ify some more gus: QOM'ify some more
2013-06-11intc/xilinx_intc: Use qemu_set_irqPeter Crosthwaite
Use qemu_set_irq rather than if-elsing qemu_irq_(lower|raise). No functional change, just reduces verbosity. Cc: qemu-trivial@nongnu.org Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-07isa: QOM'ify ISADeviceAndreas Färber
Rename its parent field and use DEVICE() where necessary. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-07i8259: Convert PICCommonState to use QOM realizefnAndreas Färber
Instead of having the parent provide PICCommonClass::init, let the children override DeviceClass::realize themselves. This pushes the responsibility of saving and calling the parent's realizefn to the children. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-07i8259: QOM'ify some moreAndreas Färber
Introduce type constant. Prepares for PIC realizefn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-07isa: Use realizefn for ISADeviceAndreas Färber
Drop ISADeviceClass::init and the resulting no-op initfn and let children implement their own realizefn. Adapt error handling. Split off an instance_init where sensible. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-02apic: rename apic specific bitoptsMichael S. Tsirkin
apic has its own version of bitops, with the difference that it works on u32 and not long. Add apic_ prefix to avoid namespace clashes. We should look into reusing standard bitops long-term, but that's not entirely trivial. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-26Remove Sun4c, Sun4d and a few CPUsBlue Swirl
Sun4c and Sun4d architectures and related CPUs are not fully implemented (especially Sun4c MMU) and there has been no interest for them. Likewise, a few CPUs (Cypress, Ross etc) are only half implemented. Remove the machines and CPUs, they can be re-added if needed later. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-12remove double semicolonsDong Xu Wang
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-01target-i386: Move APIC to ICC busIgor Mammedov
It allows APIC to be hotplugged. * map APIC's mmio at board level if it is present * do not register mmio region for each APIC, since only one is used/mapped Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZEIgor Mammedov
Put APIC_SPACE_SIZE in a public header so that it can be reused elsewhere later. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-29i8259: QOM cleanupsAndreas Färber
Eliminate DO_UPCAST() for PICCommonState. Prepares for ISA realizefn. Also give the i8259_common type registration functions unique names while at it. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1367093935-29091-6-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-16ioapic: Replace FROM_SYSBUS() with QOM type castIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-15arm: fix location of some include filesPeter Maydell
The recent rearrangement of include files had some minor errors: devices.h is not ARM specific and should not be in arm/ arm.h should be in arm/ Move these two headers to correct this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-12Typo, spelling and grammatical fixesPeter Maydell
Minor fixes to documentation and code comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-08hw: move private headers to hw/ subdirectories.Paolo Bonzini
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make subdirectories for devicesPaolo Bonzini
Prepare the new directory structure. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 00:31:24 +0000