aboutsummaryrefslogtreecommitdiff
path: root/hw/intc/arm_gic.c
AgeCommit message (Collapse)Author
2022-11-21hw/intc: add implementation of GICD_IIDR to Arm GICAlex Bennée
a66a24585f (hw/intc/arm_gic: Implement read of GICC_IIDR) implemented this for the CPU interface register. The fact we don't implement it shows up when running Xen with -d guest_error which is definitely wrong because the guest is perfectly entitled to read it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-11-21hw/intc: clean-up access to GIC multi-byte registersAlex Bennée
gic_dist_readb was returning a word value which just happened to work as a result of the way we OR the data together. Lets fix it so only the explicit byte is returned for each part of GICD_TYPER. I've changed the return type to uint8_t although the overflow is only detected with an explicit -Wconversion. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/intc/arm_gic: Allow reset of the running priorityPetr Pavlu
When running Linux on a machine with GICv2, the kernel can crash while processing an interrupt and can subsequently start a kdump kernel from the active interrupt handler. In such a case, the crashed kernel might not gracefully signal the end of interrupt to the GICv2 hardware. The kdump kernel will however try to reset the GIC state on startup to get the controller into a sane state, in particular the kernel writes ones to GICD_ICACTIVERn and wipes out GICC_APRn to make sure that no interrupt is active. The patch adds a logic to recalculate the running priority when GICC_APRn/GICC_NSAPRn is written which makes sure that the mentioned reset works with the GICv2 emulation in QEMU too and the kdump kernel starts receiving interrupts. The described scenario can be reproduced on an AArch64 QEMU virt machine with a kdump-enabled Linux system by using the softdog module. The kdump kernel will hang at some point because QEMU still thinks the running priority is that of the timer interrupt and asserts no new interrupts to the system: $ modprobe softdog soft_margin=10 soft_panic=1 $ cat > /dev/watchdog [Press Enter to start the watchdog, wait for its timeout and observe that the kdump kernel hangs on startup.] Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Message-id: 20220113151916.17978-3-ppavlu@suse.cz Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/intc/arm_gic: Implement read of GICC_IIDRPetr Pavlu
Implement support for reading GICC_IIDR. This register is used by the Linux kernel to recognize that GICv2 with GICC_APRn is present. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Message-id: 20220113151916.17978-2-ppavlu@suse.cz Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-02hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR registerPhilippe Mathieu-Daudé
Per the ARM Generic Interrupt Controller Architecture specification (document "ARM IHI 0048B.b (ID072613)"), the SGIINTID field is 4 bit, not 10: - 4.3 Distributor register descriptions - 4.3.15 Software Generated Interrupt Register, GICD_SG - Table 4-21 GICD_SGIR bit assignments The Interrupt ID of the SGI to forward to the specified CPU interfaces. The value of this field is the Interrupt ID, in the range 0-15, for example a value of 0b0011 specifies Interrupt ID 3. Correct the irq mask to fix an undefined behavior (which eventually lead to a heap-buffer-overflow, see [Buglink]): $ echo 'writel 0x8000f00 0xff4affb0' | qemu-system-aarch64 -M virt,accel=qtest -qtest stdio [I 1612088147.116987] OPENED [R +0.278293] writel 0x8000f00 0xff4affb0 ../hw/intc/arm_gic.c:1498:13: runtime error: index 944 out of bounds for type 'uint8_t [16][8]' SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../hw/intc/arm_gic.c:1498:13 This fixes a security issue when running with KVM on Arm with kernel-irqchip=off. (The default is kernel-irqchip=on, which is unaffected, and which is also the correct choice for performance.) Cc: qemu-stable@nongnu.org Fixes: CVE-2021-20221 Fixes: 9ee6e8bb853 ("ARMv7 support.") Buglink: https://bugs.launchpad.net/qemu/+bug/1913916 Buglink: https://bugs.launchpad.net/qemu/+bug/1913917 Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210131103401.217160-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-02hw/intc/arm_gic: Allow to use QTest without crashingPhilippe Mathieu-Daudé
Alexander reported an issue in gic_get_current_cpu() using the fuzzer. Yet another "deref current_cpu with QTest" bug, reproducible doing: $ echo readb 0xf03ff000 | qemu-system-arm -M npcm750-evb,accel=qtest -qtest stdio [I 1611849440.651452] OPENED [R +0.242498] readb 0xf03ff000 hw/intc/arm_gic.c:63:29: runtime error: member access within null pointer of type 'CPUState' (aka 'struct CPUState') SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hw/intc/arm_gic.c:63:29 in AddressSanitizer:DEADLYSIGNAL ================================================================= ==3719691==ERROR: AddressSanitizer: SEGV on unknown address 0x0000000082a0 (pc 0x5618790ac882 bp 0x7ffca946f4f0 sp 0x7ffca946f4a0 T0) ==3719691==The signal is caused by a READ memory access. #0 0x5618790ac882 in gic_get_current_cpu hw/intc/arm_gic.c:63:29 #1 0x5618790a8901 in gic_dist_readb hw/intc/arm_gic.c:955:11 #2 0x5618790a7489 in gic_dist_read hw/intc/arm_gic.c:1158:17 #3 0x56187adc573b in memory_region_read_with_attrs_accessor softmmu/memory.c:464:9 #4 0x56187ad7903a in access_with_adjusted_size softmmu/memory.c:552:18 #5 0x56187ad766d6 in memory_region_dispatch_read1 softmmu/memory.c:1426:16 #6 0x56187ad758a8 in memory_region_dispatch_read softmmu/memory.c:1449:9 #7 0x56187b09e84c in flatview_read_continue softmmu/physmem.c:2822:23 #8 0x56187b0a0115 in flatview_read softmmu/physmem.c:2862:12 #9 0x56187b09fc9e in address_space_read_full softmmu/physmem.c:2875:18 #10 0x56187aa88633 in address_space_read include/exec/memory.h:2489:18 #11 0x56187aa88633 in qtest_process_command softmmu/qtest.c:558:13 #12 0x56187aa81881 in qtest_process_inbuf softmmu/qtest.c:797:9 #13 0x56187aa80e02 in qtest_read softmmu/qtest.c:809:5 current_cpu is NULL because QTest accelerator does not use CPU. Fix by skipping the check and returning the first CPU index when QTest accelerator is used, similarly to commit c781a2cc423 ("hw/i386/vmport: Allow QTest use without crashing"). Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Message-id: 20210128161417.3726358-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUsEdgar E. Iglesias
Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28arm_gic: Mask the un-supported priority bitsSai Pavan Boddu
The GICv2 allows the implementation to implement a variable number of priority bits; unimplemented bits in the priority registers are read as zeros, writes ignored. We were previously always implementing a full 8 bits of priority, which is allowed but not what the real hardware typically does (which is usually to have 4 or 5 bits of priority). Add a new device property to allow the number of implemented property bits to be specified. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-id: 1582537164-764-2-git-send-email-sai.pavan.boddu@xilinx.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: improved commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2018-09-25hw/intc/arm_gic: Drop GIC_BASE_IRQ macroPeter Maydell
The GIC_BASE_IRQ macro is a leftover from when we shared code between the GICv2 and the v7M NVIC. Since the NVIC is now split off, GIC_BASE_IRQ is always 0, and we can just delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180824161819.11085-1-peter.maydell@linaro.org
2018-08-24hw/intc/arm_gic: Make per-cpu GICH memory regions 0x200 bytes largePeter Maydell
Reduce the size of the per-cpu GICH memory regions from 0x1000 to 0x200. The registers only cover 0x200 bytes, and the Cortex-A15 wants to map them at a spacing of 0x200 bytes apart. Having the region be too large interferes with mapping them like that, so reduce it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-3-peter.maydell@linaro.org
2018-08-14intc/arm_gic: Improve tracesLuc Michel
Add some traces to the ARM GIC to catch register accesses (distributor, (v)cpu interface and virtual interface), and to take into account virtualization extensions (print `vcpu` instead of `cpu` when needed). Also add some virtualization extensions specific traces: LR updating and maintenance IRQ generation. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-19-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement maintenance interrupt generationLuc Michel
Implement the maintenance interrupt generation that is part of the GICv2 virtualization extensions. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-18-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement gic_update_virt() functionLuc Michel
Add the gic_update_virt() function to update the vCPU interface states and raise vIRQ and vFIQ as needed. This commit renames gic_update() to gic_update_internal() and generalizes it to handle both cases, with a `virt' parameter to track whether we are updating the CPU or vCPU interfaces. The main difference between CPU and vCPU is the way we select the best IRQ. This part has been split into the gic_get_best_(v)irq functions. For the virt case, the LRs are iterated to find the best candidate. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-17-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement the virtual interface registersLuc Michel
Implement the read and write functions for the virtual interface of the virtualization extensions in the GICv2. One mirror region per CPU is also created, which maps to that specific CPU id. This is required by the GIC architecture specification. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-16-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Wire the vCPU interfaceLuc Michel
Add the read/write functions to handle accesses to the vCPU interface. Those accesses are forwarded to the real CPU interface, with the CPU id being converted to the corresponding vCPU id (vCPU id = CPU id + GIC_NCPU). Signed-off-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180727095421.386-15-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement virtualization extensions in gic_cpu_(read|write)Luc Michel
Implement virtualization extensions in the gic_cpu_read() and gic_cpu_write() functions. Those are the last bits missing to fully support virtualization extensions in the CPU interface path. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-14-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement virtualization extensions in ↵Luc Michel
gic_(deactivate|complete_irq) Implement virtualization extensions in the gic_deactivate_irq() and gic_complete_irq() functions. When the guest writes an invalid vIRQ to V_EOIR or V_DIR, since the GICv2 specification is not entirely clear here, we adopt the behaviour observed on real hardware: * When V_CTRL.EOIMode is false (EOI split is disabled): - In case of an invalid vIRQ write to V_EOIR: -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR triggers a priority drop, and increments V_HCR.EOICount. -> If V_APR is already cleared, nothing happen - An invalid vIRQ write to V_DIR is ignored. * When V_CTRL.EOIMode is true: - In case of an invalid vIRQ write to V_EOIR: -> If some bits are set in H_APR, an invalid vIRQ write to V_EOIR triggers a priority drop. -> If V_APR is already cleared, nothing happen - An invalid vIRQ write to V_DIR increments V_HCR.EOICount. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180727095421.386-13-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement virtualization extensions in gic_acknowledge_irqLuc Michel
Implement virtualization extensions in the gic_acknowledge_irq() function. This function changes the state of the highest priority IRQ from pending to active. When the current CPU is a vCPU, modifying the state of an IRQ modifies the corresponding LR entry. However if we clear the pending flag before setting the active one, we lose track of the LR entry as it becomes invalid. The next call to gic_get_lr_entry() will fail. To overcome this issue, we call gic_activate_irq() before gic_clear_pending(). This does not change the general behaviour of gic_acknowledge_irq. We also move the SGI case in gic_clear_pending_sgi() to enhance code readability as the virtualization extensions support adds a if-else level. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-12-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement virtualization extensions in ↵Luc Michel
gic_(activate_irq|drop_prio) Implement virtualization extensions in gic_activate_irq() and gic_drop_prio() and in gic_get_prio_from_apr_bits() called by gic_drop_prio(). When the current CPU is a vCPU: - Use GIC_VIRT_MIN_BPR and GIC_VIRT_NR_APRS instead of their non-virt counterparts, - the vCPU APR is stored in the virtual interface, in h_apr. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-11-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Add virtualization enabled IRQ helper functionsLuc Michel
Add some helper functions to gic_internal.h to get or change the state of an IRQ. When the current CPU is not a vCPU, the call is forwarded to the GIC distributor. Otherwise, it acts on the list register matching the IRQ in the current CPU virtual interface. gic_clear_active can have a side effect on the distributor, even in the vCPU case, when the correponding LR has the HW field set. Use those functions in the CPU interface code path to prepare for the vCPU interface implementation. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727095421.386-10-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Refactor secure/ns access check in the CPU interfaceLuc Michel
An access to the CPU interface is non-secure if the current GIC instance implements the security extensions, and the memory access is actually non-secure. Until then, it was checked with tests such as if (s->security_extn && !attrs.secure) { ... } in various places of the CPU interface code. With the implementation of the virtualization extensions, those tests must be updated to take into account whether we are in a vCPU interface or not. This is because the exposed vCPU interface does not implement security extensions. This commits replaces all those tests with a call to the gic_cpu_ns_access() function to check if the current access to the CPU interface is non-secure. This function takes into account whether the current CPU is a vCPU or not. Note that this function is used only in the (v)CPU interface code path. The distributor code path is left unchanged, as the distributor is not exposed to vCPUs at all. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727095421.386-9-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Add virtualization extensions helper macros and functionsLuc Michel
Add some helper macros and functions related to the virtualization extensions to gic_internal.h. The GICH_LR_* macros help extracting specific fields of a list register value. The only tricky one is the priority field as only the MSB are stored. The value must be shifted accordingly to obtain the correct priority value. gic_is_vcpu() and gic_get_vcpu_real_id() help with (v)CPU id manipulation to abstract the fact that vCPU id are in the range [ GIC_NCPU; (GIC_NCPU + num_cpu) [. gic_lr_* and gic_virq_is_valid() help with the list registers. gic_get_lr_entry() returns the LR entry for a given (vCPU, irq) pair. It is meant to be used in contexts where we know for sure that the entry exists, so we assert that entry is actually found, and the caller can avoid the NULL check on the returned pointer. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-8-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Add the virtualization extensions to the GIC stateLuc Michel
Add the necessary parts of the virtualization extensions state to the GIC state. We choose to increase the size of the CPU interfaces state to add space for the vCPU interfaces (the GIC_NCPU_VCPU macro). This way, we'll be able to reuse most of the CPU interface code for the vCPUs. The only exception is the APR value, which is stored in h_apr in the virtual interface state for vCPUs. This is due to some complications with the GIC VMState, for which we don't want to break backward compatibility. APRs being stored in 2D arrays, increasing the second dimension would lead to some ugly VMState description. To avoid that, we keep it in h_apr for vCPUs. The vCPUs are numbered from GIC_NCPU to (GIC_NCPU * 2) - 1. The `gic_is_vcpu` function help to determine if a given CPU id correspond to a physical CPU or a virtual one. For the in-kernel KVM VGIC, since the exposed VGIC does not implement the virtualization extensions, we report an error if the corresponding property is set to true. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-6-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Remove some dead code and put some functions staticLuc Michel
Some functions are now only used in arm_gic.c, put them static. Some of them where only used by the NVIC implementation and are not used anymore, so remove them. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-4-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Implement GICD_ISACTIVERn and GICD_ICACTIVERn registersLuc Michel
Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers in the GICv2. Those registers allow to set or clear the active state of an IRQ in the distributor. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-3-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14intc/arm_gic: Refactor operations on the distributorLuc Michel
In preparation for the virtualization extensions implementation, refactor the name of the functions and macros that act on the GIC distributor to make that fact explicit. It will be useful to differentiate them from the ones that will act on the virtual interfaces. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-2-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-16hw/intc/arm_gic: Fix handling of GICD_ITARGETSRPeter Maydell
The GICD_ITARGETSR implementation still has some 11MPCore behaviour that we were incorrectly using in our GICv1 and GICv2 implementations for the case where the interrupt number is less than GIC_INTERNAL. The desired behaviour here is: * for 11MPCore: RAZ/WI for irqs 0..28; read a number matching the CPU doing the read for irqs 29..31 * for GICv1 and v2: RAZ/WI if uniprocessor; otherwise read a number matching the CPU doing the read for all irqs < 32 Stop squashing GICD_ITARGETSR to 0 for IRQs 0..28 unless this is an 11MPCore GIC. Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180712154152.32183-3-peter.maydell@linaro.org
2018-07-16hw/intc/arm_gic: Check interrupt number in gic_deactivate_irq()Peter Maydell
In gic_deactivate_irq() the interrupt number comes from the guest (on a write to the GICC_DIR register), so we need to sanity check that it isn't out of range before we use it as an array index. Handle this in a similar manner to the check we do in gic_complete_irq() for the GICC_EOI register. The array overrun is not disastrous because the calling code uses (value & 0x3ff) to extract the interrupt field, so the only out-of-range values possible are 1020..1023, which allow overrunning only from irq_state[] into the following irq_target[] array which the guest can already manipulate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180712154152.32183-2-peter.maydell@linaro.org
2018-02-05qdev: use device_class_set_parent_realize/unrealize/reset()Philippe Mathieu-Daudé
changes generated using the following Coccinelle patch: @@ type DeviceParentClass; DeviceParentClass *pc; DeviceClass *dc; identifier parent_fn; identifier child_fn; @@ ( +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->realize; ... -dc->realize = child_fn; | +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->unrealize; ... -dc->unrealize = child_fn; | +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->reset; ... -dc->reset = child_fn; ) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180114020412.26160-4-f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-25hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1Luc MICHEL
When C_CTRL.CBPR is 1, the Non-Secure view of C_BPR is altered: - A Non-Secure read of C_BPR should return the BPR value plus 1, saturated to 7, - A Non-Secure write should be ignored. Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr> Message-id: 20180119145756.7629-6-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed comment typo] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25hw/intc/arm_gic: Fix group priority computation for group 1 IRQsLuc MICHEL
When determining the group priority of a group 1 IRQ, if C_CTRL.CBPR is 0, the non-secure BPR value is used. However, this value must be incremented by one so that it matches the secure world number of implemented priority bits (NS world has one less priority bit compared to the Secure world). Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr> Message-id: 20180119145756.7629-5-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: add assert, as the gicv3 code has] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25hw/intc/arm_gic: Fix C_RPR value on idle priorityLuc MICHEL
When there is no active interrupts in the GIC, a read to the C_RPR register should return the value of the "Idle priority", which is either the maximum value an IRQ priority field can be set to, or 0xff. Since the QEMU GIC model implements all the 8 priority bits, the Idle priority is 0xff. Internally, when there is no active interrupt, the running priority value is 0x100. The gic_get_running_priority function returns an uint8_t and thus, truncate this value to 0x00 when returning it. This is wrong since a value of 0x00 correspond to the maximum possible priority. This commit fixes the returned value when the internal value is 0x100. Note that it is correct for the Non-Secure view to return 0xff even though from the NS world point of view, only 7 priority bits are implemented. The specification states that the Idle priority can be 0xff even when not all the 8 priority bits are implemented. This has been verified against a real GICv2 hardware on a Xilinx ZynqMP based board. Regarding the ARM11MPCore version of the GIC, the specification is not clear on that point, so this commit does not alter its behavior. Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr> Message-id: 20180119145756.7629-4-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and ↵Luc MICHEL
pending" In the GIC, when an IRQ is acknowledged, its state goes from "pending" to: - "active" if the corresponding IRQ pin has been de-asserted - "active and pending" otherwise. The GICv2 manual states that when a IRQ becomes active (or active and pending), the GIC should either signal another (higher priority) IRQ to the CPU if there is one, or de-assert the CPU IRQ pin. The current implementation of the GIC in QEMU does not check if the IRQ is already active when looking for pending interrupts with sufficient priority in gic_update(). This can lead to signaling an interrupt that is already active. This usually happens when splitting priority drop and interrupt deactivation. On priority drop, the IRQ stays active until deactivation. If it becomes pending again, chances are that it will be incorrectly selected as best_irq in gic_update(). This commit fixes this by checking if the IRQ is not already active when looking for best_irq in gic_update(). Note that regarding the ARM11MPCore GIC version, the corresponding manual is not clear on that point, but it has has no priority drop/interrupt deactivation separation, so this case should not happen. Signed-off-by: Luc MICHEL <luc.michel@git.antfield.fr> Message-id: 20180119145756.7629-3-luc.michel@greensocs.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11hw/intc/arm_gic: reserved register addresses are RAZ/WIPeter Maydell
The GICv2 specification says that reserved register addresses must RAZ/WI; now that we implement external abort handling for Arm CPUs this means we must return MEMTX_OK rather than MEMTX_ERROR, to avoid generating a spurious guest data abort. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
2017-07-11ARM: KVM: Enable in-kernel timers with user space gicAlexander Graf
When running with KVM enabled, you can choose between emulating the gic in kernel or user space. If the kernel supports in-kernel virtualization of the interrupt controller, it will default to that. If not, if will default to user space emulation. Unfortunately when running in user mode gic emulation, we miss out on interrupt events which are only available from kernel space, such as the timer. This patch leverages the new kernel/user space pending line synchronization for timer events. It does not handle PMU events yet. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1498577737-130264-1-git-send-email-agraf@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-09hw/intc/arm_gic: modernise the DPRINTFAlex Bennée
While I was debugging the icount issues I realised a bunch of the messages look quite similar. I've fixed this by including __func__ in the debug print. At the same time I move the a modern if (GATE) style printf which ensures the compiler can check for format string errors even if the code gets optimised away in the non-DEBUG_GIC case. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-02-28arm: gic: Remove references to NVICMichael Davidsaver
Now that the NVIC is its own separate implementation, we can clean up the GIC code by removing REV_NVIC and conditionals which use it. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2016-11-07nvic: set pending status for not active interruptsMarcin Krzeminski
According to ARM DUI 0552A 4.2.10. NVIC set pending status also for disabled interrupts. Correct the logic for when interrupts are marked pending both on input level transition and when interrupts are dismissed, to match the NVIC behaviour rather than the 11MPCore GIC. Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/intc/gic: RAZ/WI non-sec access to sec interruptsJens Wiklander
Treat non-secure accesses to registers and bits in registers of secure interrupts as RAZ/WI. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-16hw/intc/arm_gic: add tracepointsHollis Blanchard
These are obviously critical to understanding interrupt delivery: gic_enable_irq gic_disable_irq gic_set_irq (inbound irq from device models) gic_update_set_irq (outbound irq to CPU) gic_acknowledge_irq The only one that I think might raise eyebrows is gic_update_bestirq, but I've (sadly) debugged problems that ended up being caused by unexpected priorities. Knowing that the GIC has an irq ready, but doesn't deliver to the CPU due to priority, has also proven important. Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com> Message-id: 1461252281-22399-1-git-send-email-hollis_blanchard@mentor.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04hw/intc/arm_gic.c: Implement GICv2 GICC_DIRPeter Maydell
The GICv2 introduces a new CPU interface register GICC_DIR, which allows an OS to split the "priority drop" and "deactivate interrupt" parts of interrupt completion. Implement this register. (Note that the register is at offset 0x1000 in the CPU interface, which means it is on a different 4K page from all the other registers.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1456854176-7813-1-git-send-email-peter.maydell@linaro.org
2016-01-29arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-21arm_gic: Update ID registers based on revisionAlistair Francis
Update the GIC ID registers (registers above 0xfe0) based on the GIC revision instead of using the sames values for all GIC implementations. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Message-id: 629e7fa5d47f2800e51cc1f18d12635f1eece349.1453333840.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19hw/arm_gic: Correctly restore nested irq priorityFrançois Baldassari
Upon activating an interrupt, set the corresponding priority bit in the APR/NSAPR registers without touching the currently set bits. In the event of nested interrupts, the GIC will then have the information it needs to restore the priority of the pre-empted interrupt once the higher priority interrupt finishes execution. Signed-off-by: François Baldassari <francois@pebble.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10hw/intc/arm_gic: Remove the definition of NUM_CPUWei Huang
arm_gic.c retrieves CPU number using either NUM_CPU(s) or s->num_cpu. Such mixed-uses make source code inconsistent. This patch removes NUM_CPU(s), which was defined for MPCore tweak long ago, and instead favors s->num_cpu. The source is more consistent after this small tweak. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 1446744293-32365-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 11:19:52 +0000