aboutsummaryrefslogtreecommitdiff
path: root/hw/ide
AgeCommit message (Collapse)Author
2019-02-05ide: split ioport registration to a separate filePaolo Bonzini
This is not needed on ARM, and brings in ISA bus code which is otherwise not necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-3-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25ide/via: Implement and use native PCI IDE modeBALATON Zoltan
This device only implemented ISA compatibility mode and native PCI IDE mode was missing but no clients actually need ISA mode but to the contrary, they usually want to switch to and use device in native PCI IDE mode. Therefore implement native PCI mode and switch default to that. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: c323f08c59b9931310c5d92503d370f77ce3a557.1548160772.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25ide/via: Rename functions to match device nameBALATON Zoltan
The device is called via-ide and the modelled IDE controller is not specific to 82C686B but is also usable independently. Therefore, change function name prefixes accordingly to match device name. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: 2905ced862c8d2ad509d73152171ce2472d72605.1548160772.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25ide/via: Remove vt82c686b_init_ports() functionBALATON Zoltan
This function is only called once from vt82c686b_ide_realize() and its content is simple enough to not need a separate function but be included in realize directly (as done in other IDE models except PIIX currently). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: 47d854e0fa41dad6861107eac61327c247965566.1548160772.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25sii3112: Remove duplicated code and use PCI IDE ops insteadBALATON Zoltan
Parts of the SiI3112 mmio are identical to PCI IDE registers so we can use the corresponding functions that were factored out into ide/pci.c. This removes code duplication and simplifies the SiI3112 model which also helped to spot a copy paste error where reading status of the 2nd channel read the 1st channel instead. This is also fixed here. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 793b6a7934ef2bba26b8d066bec446019efa6c5d.1547166960.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25ide: Get rid of CMD646BAR structBALATON Zoltan
Now that no CMD646 specific parts are left in CMD646BAR (all remaining members are really PCI IDE specific) this struct can be deleted moving the memory regions for PCI IDE BARs to PCIIDEState where they better belong. The CMD646 PCI IDE model is adjusted accordingly. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 4b6cb2ae150dc0d21178209e4beb1e35140a7325.1547166960.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25cmd646: Move PCI IDE specific functions to ide/pci.cBALATON Zoltan
The io mem ops callbacks are not specific to CMD646 but really follow the PCI IDE spec so move these from cmd646.c to pci.c to allow other PCI IDE implementations to use them. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: a2b1b2b74afdc78330b8b75605687f683a249635.1547166960.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25cmd646: Remove IDEBus from CMD646BARBALATON Zoltan
The cmd646 io mem ops callbacks only need the IDEBus which is currently passed via a CMD646BAR struct. No need to wrap it up like that, we can pass it directly to these callbacks which then allows to drop the IDEBus from the CMD646BAR. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 7a31c155c9899869794499d841d30c7ef32aae47.1547166960.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-25cmd646: Remove unused variableBALATON Zoltan
There was a pointer to PCIIDEState in CMD646BAR which was set but not used afterwards. Get rid of this unused variable. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1e352f091aa601fb2e19771aac46529fe278dd91.1547166960.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-09trivial: Don't include isa.h if it is not really necessaryThomas Huth
These files don't seem to do anything related to ISA directly, so there is no need to include isa.h here. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-02replay: replay BH for IDE trim operationPavel Dovgalyuk
This patch makes IDE trim BH deterministic, because it affects the device state. Therefore its invocation should be replayed instead of running at the random moment. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180912081950.3228.68987.stgit@pasha-VirtualBox> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-30macio: add addr property to macio IDE objectMark Cave-Ayland
This contains the offset of the IDE controller within the macio address space and is required to allow the address to be included within the fw path. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-30macio: move MACIOIDEState type declarations to macio.hMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-15block: Remove deprecated -drive option serialKevin Wolf
This reinstates commit b0083267444a5e0f28391f6c2831a539f878d424, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive option serial"Cornelia Huck
This reverts commit b0083267444a5e0f28391f6c2831a539f878d424. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-25ahci: fix FIS I bit and PIO Setup FIS interruptPaolo Bonzini
The "I" bit in PIO Setup and D2H FISes is exclusively a device concept and the irqstatus register in the controller does not matter. The SATA spec says when it should be one; for D2H FISes in practice it is always set, while the PIO Setup FIS has several subcases that are documented in the patch. Also, the PIO Setup FIS interrupt is actually generated _after_ data has been received. Someone should probably spend some time reading the SATA specification and figuring out the more obscure fields in the PIO Setup FIS, but this is enough to fix SeaBIOS booting from ATAPI CD-ROMs over an AHCI controller. Fixes: 956556e131e35f387ac482ad7b41151576fef057 Reported-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20180622165159.19863-1-pbonzini@redhat.com [Minor edit to avoid ATAPI comment ambiguity. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-15block: Remove deprecated -drive option serialKevin Wolf
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-13Purge uses of banned g_assert_FOO()Markus Armbruster
We banned use of certain g_assert_FOO() functions outside tests, and made checkpatch.pl flag them (commit 6e9389563e5). We neglected to purge existing uses. Do that now. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180608170231.27912-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: John Snow <jsnow@redhat.com>
2018-06-08ide: introduce ide_transfer_start_norecursePaolo Bonzini
For the case where the end_transfer_func is also the caller of ide_transfer_start, the mutual recursion can lead to unlimited stack usage. Introduce a new version that can be used to change tail recursion into a loop, and use it in trace_ide_atapi_cmd_reply_end. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08atapi: call ide_set_irq before ide_transfer_startPaolo Bonzini
The ATAPI_INT_REASON_IO interrupt is raised when I/O starts, but in the AHCI case ide_set_irq was actually called at the end of a mutual recursion. Move it early, with the side effect that ide_transfer_start becomes a tail call in ide_atapi_cmd_reply_end. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ide: make ide_transfer_stop idempotentPaolo Bonzini
There is code checking s->end_transfer_func and it was not taught about ide_transfer_cancel. We can just use ide_transfer_stop because s->end_transfer_func is only ever called in the DRQ phase. ide_transfer_cancel can then be removed, since it would just be calling ide_transfer_halt. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ide: call ide_cmd_done from ide_transfer_stopPaolo Bonzini
The code can simply be moved to the sole caller that has notify == true. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ide: push end_transfer_func out of start_transfer callback, rename callbackPaolo Bonzini
Now that end_transfer_func is a tail call in ahci_start_transfer, formalize the fact that the callback (of which ahci_start_transfer is the sole implementation) takes care of the transfer too: rename it to pio_transfer and, if it is present, call the end_transfer_func as soon as it returns. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: move PIO Setup FIS before transfer, fix it for ATAPI commandsJohn Snow
The PIO Setup FIS is written in the PIO:Entry state, which comes before the ATA and ATAPI data transfer states. As a result, the PIO Setup FIS interrupt is now raised before DMA ends for ATAPI commands, and tests have to be adjusted. This is also hinted by the description of the command header in the AHCI specification, where the "A" bit is described as When ‘1’, indicates that a PIO setup FIS shall be sent by the device indicating a transfer for the ATAPI command. and also by the description of the ACMD (ATAPI command region): The ATAPI command must be either 12 or 16 bytes in length. The length transmitted by the HBA is determined by the PIO setup FIS that is sent by the device requesting the ATAPI command. QEMU, which conflates the "generator" and the "receiver" of the FIS into one device, always uses ATAPI_PACKET_SIZE, aka 12, for the length. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: make ahci_mem_write traces more descriptiveJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-17-jsnow@redhat.com [Fixed format specifiers. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: delete old host register address definitionsJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-16-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: adjust ahci_mem_write to work on registersJohn Snow
Actually, this function looks pretty broken, but for now, let's finish up what this series of commits came here to do. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-15-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: fix spacing damage on ahci_mem_writeJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-14-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: make mem_read_32 traces more descriptiveJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-13-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: modify ahci_mem_read_32 to work on register numbersJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-12-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: fix host register max addressJohn Snow
Yes, comment, it ought to be 0x2C. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: add host register enumerationJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: delete old port register address definitionsJohn Snow
They're now unused. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: make port write traces more descriptiveJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-8-jsnow@redhat.com [Changed format specifier. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: modify ahci_port_write to use register numbersJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-7-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: combine identical clauses in port writeJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-6-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: fix spacing damage on ahci_port_writeJohn Snow
Churn. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-5-jsnow@redhat.com [Fix patchew/checkpatch nit. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: make port read traces more descriptiveJohn Snow
A trace is added to let us watch unimplemented registers specifically, as these are more likely to cause us trouble. Otherwise, the port read traces now tell us what register is getting hit, which is nicer. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: modify ahci_port_read to use register numbersJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: add port register enumerationJohn Snow
Instead of tracking offsets, lets count the registers. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180531222835.16558-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: don't schedule unnecessary BHJohn Snow
The comment gives us a hint. *Maybe* we still have something to process. Well, why not check? Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20180531004323.4611-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: fix PxCI register raceJohn Snow
Fixes: https://bugs.launchpad.net/qemu/+bug/1769189 AHCI presently signals completion prior to the PxCI register being cleared to indicate completion. If a guest driver attempts to issue a new command in its IRQ handler, it might be surprised to learn there is still a command pending. In the case of Windows 10's boot driver, it will actually poll the IRQ register hoping to find out when the command is done running -- which will never happen, as there isn't a command running. Fix this: clear PxCI in ahci_cmd_done and not in the asynchronous BH. Because it now runs synchronously, we don't need to check if the command is actually done by spying on the ATA registers. We know it's done. CC: qemu-stable <qemu-stable@nongnu.org> Reported-by: François Guerraz <kubrick@fgv6.net> Tested-by: Bruce Rogers <brogers@suse.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20180531004323.4611-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ahci: trim signatures on raise/lowerJohn Snow
These functions work on the AHCI device, not the individual AHCI devices, so trim the AHCIDevice argument. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20180531004323.4611-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01ide: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01hw/ide: Remove unused includePhilippe Mathieu-Daudé
There is no need to include pci.h in this file. (Continue f23c81073a cleanup). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-21-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-20hw/ide/ahci: Keep ALLWINNER_AHCI() macro internalPhilippe Mathieu-Daudé
The ALLWINNER_AHCI() macro is only used in ahci-allwinner.c. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-20misc, ide: remove use of HWADDR_PRIx in trace eventsDaniel P. Berrangé
The trace events all use a uint64_t data type, so should be using the corresponding PRIx64 format, not HWADDR_PRIx which is intended for use with the 'hwaddr' type. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 03:42:05 +0000