aboutsummaryrefslogtreecommitdiff
path: root/hw/ide
AgeCommit message (Collapse)Author
2016-09-08portio: keep references on portioMarc-André Lureau
The isa_register_portio_list() function allocates ioports data/state. Let's keep the reference to this data on some owner. This isn't enough to fix leaks, but at least, ASAN stops complaining of direct leaks. Further cleanup would require calling portio_list_del/destroy(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-05ide: ide-cd without drive property for empty driveKevin Wolf
This allows the creation of an empty ide-cd device without manually creating a BlockBackend. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
2016-08-09atapi: fix halted DMA resetJohn Snow
Followup to 87ac25fd, this time for ATAPI DMA. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1470164128-28158-1-git-send-email-jsnow@redhat.com Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2016-08-08Merge remote-tracking branch ↵Peter Maydell
'remotes/elmarco/tags/leaks-for-2.7-pull-request' into staging # gpg: Signature made Sun 07 Aug 2016 21:03:14 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/leaks-for-2.7-pull-request: ahci: fix sglist leak on retry usb: free leaking path usb: free USBDevice.strings virtio-input: free config list qjson: free str ahci: free irqs array char: free MuxDriver when closing char: free the tcp connection data when closing numa: do not leak NumaOptions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-08macio: set res_count value to 0 after non-block ATAPI DMA transfersMark Cave-Ayland
res_count should be set to the number of outstanding bytes after a DBDMA request. Unfortunately this wasn't being set to zero by the non-block transfer codepath meaning drivers that checked the descriptor result for such requests (e.g reading the CDROM TOC) would assume from a non-zero result that the transfer had failed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-08-08ahci: fix sglist leak on retryMarc-André Lureau
ahci-test /x86_64/ahci/io/dma/lba28/retry triggers the following leak: Direct leak of 16 byte(s) in 1 object(s) allocated from: #0 0x7fc4b2a25e20 in malloc (/lib64/libasan.so.3+0xc6e20) #1 0x7fc4993bce58 in g_malloc (/lib64/libglib-2.0.so.0+0x4ee58) #2 0x556a187d4b34 in ahci_populate_sglist hw/ide/ahci.c:896 #3 0x556a187d8237 in ahci_dma_prepare_buf hw/ide/ahci.c:1367 #4 0x556a187b5a1a in ide_dma_cb hw/ide/core.c:844 #5 0x556a187d7eec in ahci_start_dma hw/ide/ahci.c:1333 #6 0x556a187b650b in ide_start_dma hw/ide/core.c:921 #7 0x556a187b61e6 in ide_sector_start_dma hw/ide/core.c:911 #8 0x556a187b9e26 in cmd_write_dma hw/ide/core.c:1486 #9 0x556a187bd519 in ide_exec_cmd hw/ide/core.c:2027 #10 0x556a187d71c5 in handle_reg_h2d_fis hw/ide/ahci.c:1204 #11 0x556a187d7681 in handle_cmd hw/ide/ahci.c:1254 #12 0x556a187d168a in check_cmd hw/ide/ahci.c:510 #13 0x556a187d0afc in ahci_port_write hw/ide/ahci.c:314 #14 0x556a187d105d in ahci_mem_write hw/ide/ahci.c:435 #15 0x556a1831d959 in memory_region_write_accessor /home/elmarco/src/qemu/memory.c:525 #16 0x556a1831dc35 in access_with_adjusted_size /home/elmarco/src/qemu/memory.c:591 #17 0x556a18323ce3 in memory_region_dispatch_write /home/elmarco/src/qemu/memory.c:1262 #18 0x556a1828cf67 in address_space_write_continue /home/elmarco/src/qemu/exec.c:2578 #19 0x556a1828d20b in address_space_write /home/elmarco/src/qemu/exec.c:2635 #20 0x556a1828d92b in address_space_rw /home/elmarco/src/qemu/exec.c:2737 #21 0x556a1828daf7 in cpu_physical_memory_rw /home/elmarco/src/qemu/exec.c:2746 #22 0x556a183068d3 in cpu_physical_memory_write /home/elmarco/src/qemu/include/exec/cpu-common.h:72 #23 0x556a18308194 in qtest_process_command /home/elmarco/src/qemu/qtest.c:382 #24 0x556a18309999 in qtest_process_inbuf /home/elmarco/src/qemu/qtest.c:573 #25 0x556a18309a4a in qtest_read /home/elmarco/src/qemu/qtest.c:585 #26 0x556a18598b85 in qemu_chr_be_write_impl /home/elmarco/src/qemu/qemu-char.c:387 #27 0x556a18598c52 in qemu_chr_be_write /home/elmarco/src/qemu/qemu-char.c:399 #28 0x556a185a2afa in tcp_chr_read /home/elmarco/src/qemu/qemu-char.c:2902 #29 0x556a18cbaf52 in qio_channel_fd_source_dispatch io/channel-watch.c:84 Follow John Snow recommendation: Everywhere else ncq_err is used, it is accompanied by a list cleanup except for ncq_cb, which is the case you are fixing here. Move the sglist destruction inside of ncq_err and then delete it from the other two locations to keep it tidy. Call dma_buf_commit in ide_dma_cb after the early return. Though, this is also a little wonky because this routine does more than clear the list, but it is at the moment the centralized "we're done with the sglist" function and none of the other side effects that occur in dma_buf_commit will interfere with the reset that occurs from ide_restart_bh, I think Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2016-08-08ahci: free irqs arrayMarc-André Lureau
Each irq is referenced by the IDEBus in ide_init2(), thus we can free the no longer used array. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: John Snow <jsnow@redhat.com>
2016-07-28ide: fix halted IO segfault at resetJohn Snow
If one attempts to perform a system_reset after a failed IO request that causes the VM to enter a paused state, QEMU will segfault trying to free up the pending IO requests. These requests have already been completed and freed, though, so all we need to do is NULL them before we enter the paused state. Existing AHCI tests verify that halted requests are still resumed successfully after a STOP event. Analyzed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1469635201-11918-2-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-07-20block: Convert BB interface to byte-based discardsEric Blake
Change sector-based blk_discard(), blk_co_discard(), and blk_aio_discard() to instead be byte-based blk_pdiscard(), blk_co_pdiscard(), and blk_aio_pdiscard(). NBD gets a lot simpler now that ignoring the unaligned portion of a byte-based discard request is handled under the hood by the block layer. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-6-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18ide: set retry_unit for PIO and FLUSH requestsEvgeny Yakovlev
The following sequence of tests discovered a problem in IDE emulation: 1. Send DMA write to IDE device 0 2. Send CMD_FLUSH_CACHE to same IDE device which will be failed by block layer using blkdebug script in tests/ide-test:test_retry_flush When doing DMA request ide/core.c will set s->retry_unit to s->unit in ide_start_dma. When dma completes ide_set_inactive sets retry_unit to -1. After that ide_flush_cache runs and fails thanks to blkdebug. ide_flush_cb calls ide_handle_rw_error which asserts that s->retry_unit == s->unit. But s->retry_unit is still -1 after previous DMA completion and flush does not use anything related to retry. This patch restricts retry unit assertion only to ops that actually use retry logic. Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468870792-7411-3-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2016-07-18ide: refactor retry_unit set and clear into separate functionEvgeny Yakovlev
Code to set and clear state associated with retry in moved into ide_set_retry and ide_clear_retry to make adding retry setups easier. Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468870792-7411-2-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2016-07-13block/qdev: Allow configuring rerror/werror with qdev propertiesKevin Wolf
The rerror/werror policies are implemented in the devices, so that's where they should be configured. In comparison to the old options in -drive, the qdev properties are only added to those devices that actually support them. If the option isn't given (or "auto" is specified), the setting of the BlockBackend is used for compatibility with the old options. For block jobs, "auto" is the same as "enospc". Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-13block/qdev: Allow configuring WCE with qdev propertiesKevin Wolf
As cache.writeback is a BlockBackend property and as such more related to the guest device than the BlockDriverState, we already removed it from the blockdev-add interface. This patch adds the new way to set it, as a qdev property of the corresponding guest device. For example: -drive if=none,file=test.img,node-name=img -device ide-hd,drive=img,write-cache=off Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05pci: Convert msi_init() to Error and fix callers to check itCao jin
msi_init() reports errors with error_report(), which is wrong when it's used in realize(). Fix by converting it to Error. Fix its callers to handle failure instead of ignoring it. For those callers who don't handle the failure, it might happen: when user want msi on, but he doesn't get what he want because of msi_init fails silently. cc: Gerd Hoffmann <kraxel@redhat.com> cc: John Snow <jsnow@redhat.com> cc: Dmitry Fleytman <dmitry@daynix.com> cc: Jason Wang <jasowang@redhat.com> cc: Michael S. Tsirkin <mst@redhat.com> cc: Hannes Reinecke <hare@suse.de> cc: Paolo Bonzini <pbonzini@redhat.com> cc: Alex Williamson <alex.williamson@redhat.com> cc: Markus Armbruster <armbru@redhat.com> cc: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29ide: move headers to include folderEfimov Vasily
The patch moves "hw/ide/achi.h", "hw/ide/pci.h" and "hw/ide/internal.h" headers to corresponding folders inside "include" folder alike other Qemu headers. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27macio: Use blk_drain instead of blk_drain_allFam Zheng
We only care about the associated backend, so blk_drain is more appropriate here. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20160612065603.21911-1-famz@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-06-20error: Remove NULL checks on error_propagate() callsEduardo Habkost
error_propagate() already ignores local_err==NULL, so there's no need to check it before calling. Coccinelle patch used to perform the changes added to scripts/coccinelle/error_propagate_null.cocci. Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-14macio: call dma_memory_unmap() at the end of each DMA transferMark Cave-Ayland
This ensures that the underlying memory is marked dirty once the transfer is complete and resolves cache coherency problems under MacOS 9. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07macio: use DMA memory interface for non-block ATAPI transfersMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-25dma-helpers: change BlockBackend to opaque value in DMAIOFuncPaolo Bonzini
Callers of dma_blk_io have no way to pass extra data to the DMAIOFunc, because the original callback and opaque are gone by the time DMAIOFunc is called. On the other hand, the BlockBackend is usually derived from those extra data that you could pass to the DMAIOFunc (in the next patch, that would be the SCSIRequest). So change DMAIOFunc's prototype, decoupling it from blk_aio_readv and blk_aio_writev's. The new prototype loses the BlockBackend and gains an extra opaque value which, in the case of dma_blk_readv and dma_blk_writev, is of course used for the BlockBackend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-25dma-helpers: change interface to byte-basedPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12atapi: Switch to byte-based block accessEric Blake
Sector-based blk_read() should die; switch to byte-based blk_pread() instead. Add new defines ATAPI_SECTOR_BITS and ATAPI_SECTOR_SIZE to use anywhere we were previously scaling BDRV_SECTOR_* by 4, for better legibility. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12ide: Switch to byte-based aio block accessEric Blake
Sector-based blk_aio_readv() and blk_aio_writev() should die; switch to byte-based blk_aio_preadv() and blk_aio_pwritev() instead. The patch had to touch multiple files at once, because dma_blk_io() takes pointers to the functions, and ide_issue_trim() piggybacks on the same interface (while ignoring offset under the hood). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writevKevin Wolf
It used to be an internal helper function just for implementing bdrv_co_do_readv/writev(), but now that it's a public interface, it deserves a name without "do" in it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2016-04-12ide: really restart pending and in-flight atapi dmaPavel Butsykin
Restart of ATAPI DMA used to be unreachable, because the request to do so wasn't indicated in bus->error_status due to the lack of spare bits, and ide_restart_bh() would return early doing nothing. This patch makes use of the observation that not all bit combinations were possible in ->error_status. In particular, IDE_RETRY_READ only made sense together with IDE_RETRY_DMA or IDE_RETRY_PIO. This allows to re-use IDE_RETRY_READ alone as an indicator of ATAPI DMA restart request. To makes things more uniform, ATAPI DMA gets its own value for ->dma_cmd. As a means against confusion, macros are added to test the state of ->error_status. The patch fixes the restart of both in-flight and pending ATAPI DMA, following the scheme similar to that of IDE DMA. [Including a fixup patch: Message-id: 1460465594-15777-1-git-send-email-pbutsykin@virtuozzo.com --js] Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1459924806-306-4-git-send-email-den@openvz.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-04-12ide: restart atapi dma by re-evaluating command packetPavel Butsykin
ide_atapi_dma_restart() used to just complete the DMA with an error, under the assumption that there isn't enough information to restart it. However, as the contents of the ->io_buffer is preserved, it looks safe to just re-evaluate it and dispatch the ATAPI command again. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1459924806-306-3-git-send-email-den@openvz.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-04-12ide: don't lose pending dma statePavel Butsykin
If the migration occurs after the IDE DMA has been set up but before it has been initiated, the state gets lost upon save/restore. Specifically, ->dma_cb callback gets cleared, so, when the guest eventually starts bus mastering, the DMA never completes, causing the guest to time out the operation. OTOH all the infrastructure is already in place to restart the DMA if the migration happens while the DMA is in progress. So reuse that infrastructure, by setting bus->error_status based on ->dma_cmd in pre_save if ->dma_cb callback is already set but DMAING is clear. This will indicate the need for restart and make sure ->dma_cb is restored in ide_restart_bh(); howeover since DMAING is clear the state upon restore will be exactly "ready for DMA" as before the save. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1459924806-306-2-git-send-email-den@openvz.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-04-12xen: Fix IDE unplugAnthony PERARD
After commit e5e7855 (blockdev: Separate BB name management), starting a guest with PVHVM support result in this assert: qemu-system-i386: block/block-backend.c:173: blk_delete: Assertion `!blk->name' failed. A backtrace show that a caller is pci_piix3_xen_ide_unplug(). This patch fix it. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-id: 1460382666-29885-1-git-send-email-anthony.perard@citrix.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-04-07xen: piix reuse pci generic class init functionMichael S. Tsirkin
piix3_ide_xen_class_init is identical to piix3_ide_class_init except it's buggy as it does not set exit and does not disable hotplug properly. Switch to the generic one. Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-10ahci: prohibit "restarting" the FIS or CLB enginesJohn Snow
If the FIS or DMA engines are already started, do not allow them to be "restarted." As a side-effect of this change, the migration post-load routine must be modified to cope. If the engines are listed as "on" in the migrated registers, they must be cleared to allow the startup routine to see the transition from "off" to "on". As a second side-effect, the extra argument to ahci_cond_engine_start is removed in favor of consistent behavior. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1454103689-13042-5-git-send-email-jsnow@redhat.com
2016-02-10ahci: explicitly reject bad engine states on post_loadJohn Snow
Currently, we let ahci_cond_start_engines reject weird configurations where either the DMA (CLB) or FIS engines are said to be started, but their matching on/off control bit is toggled off. There should be no way to achieve this, since any time you toggle the control bit off, the status bit should always follow synchronously. Preparing for a refactor in cond_start_engines, move the rejection logic straight up into post_load. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1454103689-13042-4-git-send-email-jsnow@redhat.com
2016-02-10ahci: handle LIST_ON and FIS_ON in map helpersJohn Snow
Instead of relying on ahci_cond_start_engines to maintain the engine status indicators itself, have the lower-layer CLB and FIS mapper helpers do it themselves. This makes the cond_start routine slightly nicer to read, and makes sure that the status indicators will always be correct. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1454103689-13042-3-git-send-email-jsnow@redhat.com
2016-02-10ahci: Do not unmap NULL addressesJohn Snow
Definitely don't try to unmap a garbage address. Reported-by: Zuozhi fzz <zuozhi.fzz@alibaba-inc.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1454103689-13042-2-git-send-email-jsnow@redhat.com
2016-02-10ide: fix device_reset to not ignore pending AIOJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1453225191-11871-7-git-send-email-jsnow@redhat.com
2016-02-10ide: Add silent DRQ cancellationJohn Snow
Split apart the ide_transfer_stop function into two versions: one that interrupts and one that doesn't. The one that doesn't can be used to halt any PIO transfers that are in the DRQ phase. It will not halt any PIO transfers that are currently in the process of buffering data for the guest to read. Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [Renamed 'etf' to 'end_transfer_func' --js] Message-id: 1453225191-11871-6-git-send-email-jsnow@redhat.com
2016-02-10ide: replace blk_drain_all by blk_drainJohn Snow
Target the drain for just one device. Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1453225191-11871-5-git-send-email-jsnow@redhat.com
2016-02-10ide: move buffered DMA cancel to coreJohn Snow
Buffered DMA cancellation was added to ATAPI devices and implemented for the BMDMA HBA. Move the code over to common IDE code and allow it to be used for any HBA. Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1453225191-11871-4-git-send-email-jsnow@redhat.com
2016-02-10ide: code motionJohn Snow
Shuffle the reset function upwards. Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1453225191-11871-3-git-send-email-jsnow@redhat.com
2016-02-10ide: Prohibit RESET on IDE drivesJohn Snow
This command is meant for ATAPI devices only, prohibit acknowledging it with a command aborted response when an IDE device is busy. Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1453225191-11871-2-git-send-email-jsnow@redhat.com
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-30macio: add dma_active to VMStateDescriptionMark Cave-Ayland
Make sure that we include the value of dma_active in the migration stream. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30macio: use the existing IDEDMA aiocb to hold the active DMA aiocbMark Cave-Ayland
Currently the aiocb is held within MACIOIDEState, however the IDE core code assumes that the current actvie DMA aiocb is held in aiocb in a few places, e.g. ide_bus_reset() and ide_reset(). Switch over to using IDEDMA aiocb to store the aiocb for the current active DMA request so that bus resets and restarts are handled correctly. As a consequence we can now use ide_set_inactive() rather than handling its functionality ourselves. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-29ide: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
2016-01-25ide: Correct the CHS 'cyls_max' limit to be 65535Shmulik Ladkani
In b7eb0c9: hw/block-common: Factor out fall back to legacy -drive cyls=... 'blkconf_geometry()' was introduced, factoring out CHS limit validation code that was repeated in ide, scsi, virtio-blk. The original IDE CHS limit prior b7eb0c9 was 65535,16,255 (as per ATA CHS addressing). However the 'cyls_max' argument passed to 'blkconf_geometry' in the ide_dev_initfn case was accidentally set to 65536 instead of 65535. Fix, providing the correct 'cyls_max'. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1453112371-29760-1-git-send-email-shmulik.ladkani@ravellosystems.com Signed-off-by: John Snow <jsnow@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 06:00:22 +0000