aboutsummaryrefslogtreecommitdiff
path: root/hw/ide/pci.c
AgeCommit message (Collapse)Author
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-04-12ide: don't lose pending dma statePavel Butsykin
If the migration occurs after the IDE DMA has been set up but before it has been initiated, the state gets lost upon save/restore. Specifically, ->dma_cb callback gets cleared, so, when the guest eventually starts bus mastering, the DMA never completes, causing the guest to time out the operation. OTOH all the infrastructure is already in place to restart the DMA if the migration happens while the DMA is in progress. So reuse that infrastructure, by setting bus->error_status based on ->dma_cmd in pre_save if ->dma_cb callback is already set but DMAING is clear. This will indicate the need for restart and make sure ->dma_cb is restored in ide_restart_bh(); howeover since DMAING is clear the state upon restore will be exactly "ready for DMA" as before the save. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1459924806-306-2-git-send-email-den@openvz.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-10ide: move buffered DMA cancel to coreJohn Snow
Buffered DMA cancellation was added to ATAPI devices and implemented for the BMDMA HBA. Move the code over to common IDE code and allow it to be used for any HBA. Signed-off-by: John Snow <jsnow@redhat.com> Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1453225191-11871-4-git-send-email-jsnow@redhat.com
2016-01-29ide: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
2015-11-17ide: orphan all buffered requests on DMA cancelPeter Lieven
If the guests canceles a DMA request we can prematurely invoke all callbacks of buffered requests and flag all them as orphaned. Ideally this avoids the need for draining all requests. For CDROM devices this works in 100% of all cases. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1447345846-15624-5-git-send-email-pl@kamp.de Signed-off-by: John Snow <jsnow@redhat.com>
2015-11-06ide: remove hardcoded 2GiB transactional limitJohn Snow
Not that you can request a >2GiB transaction, but that's why checking for it makes no sense anymore. With the newer 'limit' parameter to prepare_buf, we no longer need a static limit. The maximum limit is still 2GiB, but the limit parameter is set to the current transaction size, which cannot surpass 32MiB (512 * 65536). If the PRDT surpasses the transactional size, then, we'll just carry out the normative underflow handling pathways instead of needing an extra, strange pathway that worries about hitting some logistical cap for the largest sglist we can support -- we'll never even attempt to build one that big anymore. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1445902682-20051-1-git-send-email-jsnow@redhat.com
2015-07-04ide: add limit to .prepare_buf()John Snow
prepare_buf should not always grab as many descriptors as it can, sometimes it should self-limit. For example, an NCQ transfer of 1 sector with a PRDT that describes 4GiB of data should not copy 4GiB of data, it should just transfer that first 512 bytes. PIO is not affected, because the dma_buf_rw dma helpers already have a byte limit built-in to them, but DMA/NCQ will exhaust the entire list regardless of requested size. AHCI 1.3 specifies in section 6.1.6 Command List Underflow that NCQ is not required to detect underflow conditions. Non-NCQ pathways signal underflow by writing to the PRDBC field, which will already occur by writing the actual transferred byte count to the PRDBC, signaling the underflow. Our NCQ pathways aren't required to detect underflow, but since our DMA backend uses the size of the PRDT to determine the size of the transer, if our PRDT is bigger than the transaction (the underflow condition) it doesn't cost us anything to detect it and truncate the PRDT. This is a recoverable error and is not signaled to the guest, in either NCQ or normal DMA cases. For BMDMA, the existing pathways should see no guest-visible difference, but any bytes described in the overage will no longer be transferred before indicating to the guest that there was an underflow. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435767578-32743-2-git-send-email-jsnow@redhat.com
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-03hw/ide/pci: Fix memory leakShannon Zhao
valgrind complains about: ==16447== 16 bytes in 2 blocks are definitely lost in loss record 1,304 of 3,310 ==16447== at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so) ==16447== by 0x2E4FD7: malloc_and_trace (vl.c:2546) ==16447== by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3) ==16447== by 0x36FB47: qemu_extend_irqs (irq.c:55) ==16447== by 0x36FBD3: qemu_allocate_irqs (irq.c:64) ==16447== by 0x3B4B44: bmdma_init (pci.c:464) ==16447== by 0x3B547B: pci_piix_init_ports (piix.c:144) ==16447== by 0x3B55D2: pci_piix_ide_realize (piix.c:164) ==16447== by 0x3EAEC6: pci_qdev_realize (pci.c:1790) ==16447== by 0x36C685: device_set_realized (qdev.c:1058) ==16447== by 0x47179E: property_set_bool (object.c:1514) ==16447== by 0x470098: object_property_set (object.c:837) Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block patches for 2.3 # gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (73 commits) MAINTAINERS: Add jcody as blockjobs, block devices maintainer iotests: add O_DIRECT alignment probing test block/raw-posix: fix launching with failed disks MAINTAINERS: Add jsnow as IDE maintainer sheepdog: Fix misleading error messages in sd_snapshot_create() Add testcase for scsi-hd devices without drive property scsi-hd: fix property unset case block/vdi: Add locking for parallel requests iotests: Drop vpc from 004's and 104's format list iotests: Remove 006 iotests: Fix 051's reference output virtio-blk: Remove the stale FIXME comment tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c sheepdog: fix confused return values qtest/ahci: add fragmented dma test qtest/ahci: Add PIO and LBA48 tests qtest/ahci: Add DMA test variants libqos/ahci: add ahci command helpers qtest/ahci: Add a macro bootup routine ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10ide: place initial state of the current request to IDEBusPaolo Bonzini
This moves more common restarting logic to the core IDE code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: replace set_unit callback with more IDEBus statePaolo Bonzini
Start moving the initial state of the current request to IDEBus, so that AHCI can use it. The set_unit callback is not used anymore once this is done. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: move restart callback to common codePaolo Bonzini
With BMDMA specific excised from the restart functions, create a HBA-agnostic restart callback to be shared between the different HBAs. Change the callback registered with the vmstate_change handler to always point to ide_restart_cb instead of relying on the IDEDMAOps.restart_cb() member. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: pass IDEBus to the restart_cbPaolo Bonzini
Pass the containing IDEBus to the restart_cb instead of the more specific BMDMAState child. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: do not use BMDMA in restart callbackPaolo Bonzini
Whenever an error stops the VM, ide_handle_rw_error does "s->bus->dma->unit = s->unit". So we can just use idebus_active_if. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: prepare to move restart to common codePaolo Bonzini
This patch adds the restart_dma callback and adjusts the ide_restart_dma function to utilize this callback to call the BMDMA-specific restart code instead of statically executing BMDMA-specific code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: start extracting ide_restart_dma out of bmdma_restart_dmaPaolo Bonzini
This patch begins refactoring the restart dma functions out of bmdma to be shared with AHCI and other future IDE HBA implementations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-06atapi migration: Throw recoverable error to avoid recoveryDr. David Alan Gilbert
(With the previous atapi_dma flag recovery) If migration happens between the ATAPI command being written and the bmdma being started, the DMA is dropped. Eventually the guest times out and recovers, but that can take many seconds. (This is rare, on a pingpong reading the CD continuously I hit this about ~1/30-1/50 migrates) I don't think we've got enough state to be able to recover safely at this point, so I throw a 'medium error, no seek complete' that I'm assuming guests will try and recover from an apparently dirty CD. OK, it's a hack, the real solution is probably to push a lot of ATAPI state into the migration stream, but this is a fix that works with no stream changes. Tested only on Linux (both RHEL5 (pre-libata) and RHEL7). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-14ide: Correct handling of malformed/short PRDTsJohn Snow
This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15ide: move retry constants out of BM_STATUS_* namespacePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide: move BM_STATUS bits to pci.[ch]Paolo Bonzini
They are not used by AHCI, and should not be even available there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide: fold add_status callback into set_inactivePaolo Bonzini
It is now called only after the set_inactive callback. Put the two together. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide: simplify start_transfer callbacksPaolo Bonzini
Drop the unused return value and make the callback optional. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide: simplify set_inactive callbacksPaolo Bonzini
Drop the unused return value and make the callback optional. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide: simplify reset callbacksPaolo Bonzini
Drop the unused return value and make the callback optional. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-27hw/ide: Add missing 'static' attributesStefan Weil
This fixes a warning from the static code analysis (smatch). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-29ide: Introduce abstract QOM type for PCIIDEStateAndreas Färber
Needed for QOM casts. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-08ide: Reset BMIDEA bit when the bus master is stoppedKevin Wolf
The device is supposed to reset the Bus Master IDE Active bit in the status register when 0 is written to the Start/Stop Bus Master bit in the command register. In the common cases this happens automatically because bdrv_drain_all() flushes the requests, but with a large PRDT it could remain set. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17ide: Remove wrong assertionKevin Wolf
The Bus Master IDE Active bit (BM_STATUS_DMAING) is not only set when the request is still in flight, but also when it has completed and the size of the physical memory regions in the PRDT was larger than the transfer size. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-28iostatus: change is_read to a boolPaolo Bonzini
Do this while we are touching this part of the code, before introducing more uses of "int is_read". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-10ide: fix compilation errors when DEBUG_IDE is setHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-21Correct types in bmdma_addr_{read,write}David Gibson
Back when I made patches introducing dma_addr_t and various PCI DMA wrapper functions, I made a mistake. The bmdma_addr_{read,write} functions need to take target_phys_addr_t not dma_addr_t, since they are assigned to MemoryRegionOps callbacks. This patch corrects my error. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-12-12Remove unnecessary casts from PCI DMA code in PCI IDEDavid Gibson
This patch removes some unnecessary casts in the PCI IDE device, introduced by commit 552908fef5b67ad9d96b76d7cb8371ebc26c9bc8 'PCI IDE: Use PCI DMA stub functions'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-05block: convert qemu_aio_flush() calls to bdrv_drain_all()Stefan Hajnoczi
Many places in QEMU call qemu_aio_flush() to complete all pending asynchronous I/O. Most of these places actually want to drain all block requests but there is no block layer API to do so. This patch introduces the bdrv_drain_all() API to wait for requests across all BlockDriverStates to complete. As a bonus we perform checks after qemu_aio_wait() to ensure that requests really have finished. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-01PCI IDE: Use PCI DMA stub functionsDavid Gibson
This updates the PCI IDE device emulation to use the explicit PCI DMA wrapper to initialize its scatter/gathjer structure. This means this driver should not need further changes when the sglist interface is extended to support IOMMUs. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-08ide: convert to memory APIAvi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-15ide: Clear error_status after restarting flushKevin Wolf
Clearing the error status flag was missing for restarting flushes. Now that the error status is separate from the BM status register, we can simply set it to 0 after restarting the request. This ensures that we never forget to clear a bit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: add TRIM supportChristoph Hellwig
Add support for TRIM sub function of the data set management command, and wire it up to the qemu discard infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: allow other dma comands than read and writeChristoph Hellwig
Replace the is_read flag with a dma_cmd flag to allow the dma and restart logic to handler other commands like TRIM. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 03:30:29 +0000