aboutsummaryrefslogtreecommitdiff
path: root/hw/ide/ich.c
AgeCommit message (Collapse)Author
2018-06-01ide: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-03-12hw: Do not include "sysemu/block-backend.h" if it is not necessaryThomas Huth
After reviewing a patch from Philippe that removes block-backend.h from hw/lm32/milkymist.c, I noticed that this header is included unnecessarily in a lot of other files, too. Remove those unneeded includes to speed up the compilation process a little bit. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-18hw/ide: remove old i386 dependencyPhilippe Mathieu-Daudé
and remove a duplicated include Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-18ahci: split public and private interfaceJohn Snow
Complete the split by renaming ahci_public.h --> ahci.h and moving the current ahci.h to hw/ide/ahci_internal.h. Adjust ahci_internal.h to now load ahci.h instead of ahci_public.h. Finalize the split by switching external users to the new header. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170623220926.11479-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2017-07-03pci: Replace pci_add_capability2() with pci_add_capability()Mao Zhongyi
After the patch 'Make errp the last parameter of pci_add_capability()', pci_add_capability() and pci_add_capability2() now do exactly the same. So drop the wrapper pci_add_capability() of pci_add_capability2(), then replace the pci_add_capability2() with pci_add_capability() everywhere. Cc: pbonzini@redhat.com Cc: rth@twiddle.net Cc: ehabkost@redhat.com Cc: mst@redhat.com Cc: dmitry@daynix.com Cc: jasowang@redhat.com Cc: marcel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05pci: Convert msi_init() to Error and fix callers to check itCao jin
msi_init() reports errors with error_report(), which is wrong when it's used in realize(). Fix by converting it to Error. Fix its callers to handle failure instead of ignoring it. For those callers who don't handle the failure, it might happen: when user want msi on, but he doesn't get what he want because of msi_init fails silently. cc: Gerd Hoffmann <kraxel@redhat.com> cc: John Snow <jsnow@redhat.com> cc: Dmitry Fleytman <dmitry@daynix.com> cc: Jason Wang <jasowang@redhat.com> cc: Michael S. Tsirkin <mst@redhat.com> cc: Hannes Reinecke <hare@suse.de> cc: Paolo Bonzini <pbonzini@redhat.com> cc: Alex Williamson <alex.williamson@redhat.com> cc: Markus Armbruster <armbru@redhat.com> cc: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-01-29ide: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
2015-11-06ahci: split realize and initPeter Crosthwaite
Do the init level tasks asap and the realize later (mainly when num_ports is available). This allows sub-class realize routines to work with the device post-init. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1a7c7b2b32e5ccf49373a5065da5ece89730d3ac.1445917756.git.crosthwaite.peter@gmail.com Signed-off-by: John Snow <jsnow@redhat.com>
2015-05-22ich9/ahci: Enable MigrationJohn Snow
Lift the flag preventing the migration of the ICH9/AHCI devices. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1430417242-11859-5-git-send-email-jsnow@redhat.com
2015-02-26ide/ich: Convert to realizeMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-22ahci: MSI capability should be at 0x80, not 0x50.John Snow
In the Intel ICH9 data sheet, the MSI capability offset in the PCI configuration space for ICH9 AHCI devices is specified to be 0x80. Further, the PCI capability pointer should always point to 0x80 in ICH9 devices, despite the fact that AHCI 1.3 specifies that it should be pointing to PMCAP (Which in this instance would be 0x70) to maintain adherence to the Intel data sheet specifications and real observed behavior. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1408643079-30675-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23ide/ich: QOM parent field cleanupAndreas Färber
Replace direct uses of AHCIPCIState::card with QOM casts and rename it to parent_obj. Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23ide/ich: QOM Upcast SweepPeter Crosthwaite
Define and use standard QOM cast macro. Remove usages of DO_UPCAST() and direct -> style upcasting. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [AF: Renamed to TYPE_ICH9_AHCI and used typedef in pci_ich9_reset()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-20dma: eliminate DMAContextPaolo Bonzini
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-25ahci: Add migration supportJason Baron
Jason tested these patches by migrating Windows 7 and Fedora 17 guests (while under I/O) on both piix with ahci attached and on q35 (which has a built-in AHCI controller). Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-10Make all static TypeInfos constAndreas Färber
Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-07-29Merge branch pci into masterMichael S. Tsirkin
Merge master and pci branch, resolve build breakage in hw/esp.c introduced by f90c2bcd. Conflicts: hw/esp.c
2012-07-04pci: convert PCIUnregisterFunc to voidAlex Williamson
Not a single driver has any possibility of failure on their exit function, let's keep it that way. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-06-27ide/ahci: Use universal DMA helper functionsDavid Gibson
The AHCI device can provide both PCI and SysBus AHCI device emulations. For this reason, it wasn't previously converted to use the pci_dma_*() helper functions. Now that we have universal DMA helper functions, this converts AHCI to use them. The DMAContext is obtained from pci_dma_context() in the PCI case and set to NULL in the SysBus case (i.e. we assume for now that a SysBus AHCI has no IOMMU translation). Cc: Kevin Wolf <kwolf@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-07msi: Invoke msi/msix_write_config from PCI coreJan Kiszka
Also this functions is better invoked by the core than by each and every device. This allows to drop the config_write callbacks from ich and intel-hda. CC: Alexander Graf <agraf@suse.de> CC: Gerd Hoffmann <kraxel@redhat.com> CC: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-06-07msi: Invoke msi/msix_reset from PCI coreJan Kiszka
There is no point in pushing this burden to the devices, they tend to forget to call them (like intel-hda, ahci, xhci did). Instead, reset functions are now called from pci_device_reset. They do nothing if MSI/MSI-X is not in use. CC: Alexander Graf <agraf@suse.de> CC: Gerd Hoffmann <kraxel@redhat.com> CC: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-06-07ahci: Clean up reset functionsJan Kiszka
Properly register reset functions via the device class. CC: Alexander Graf <agraf@suse.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-06-07ahci: Fix reset of MSI functionJan Kiszka
Call msi_reset on device reset as still required by the core. CC: Alexander Graf <agraf@suse.de> CC: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: remove baked in notion of aliases (v2)Anthony Liguori
Limit them to the device_add functionality. Device aliases were a hack based on the fact that virtio was modeled the wrong way. The mechanism for aliasing is very limited in that only one alias can exist for any device. We have to support it for the purposes of compatibility but we only need to support it in device_add so restrict it to that piece of code. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - Use a table for aliases (Paolo)
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27pci: convert to QEMU Object ModelAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: prepare source tree for code conversionAnthony Liguori
These are various small stylistic changes which help make things more consistent such that the automated conversion script can be simpler. It's not necessary to agree or disagree with these style changes because all of this code is going to be rewritten by the patch monkey script anyway. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-21ahci: add port I/O index-data pairDaniel Verkamp
Implement an I/O space index-data register pair as defined by the AHCI spec, including the corresponding SATA PCI capability and BAR. This allows real-mode code to access the AHCI registers; real-mode code cannot address the memory-mapped register space because it is beyond the first megabyte. Signed-off-by: Daniel Verkamp <daniel@drv.nu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08ahci: convert to memory APIAvi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-20ahci doesn't support migrationGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-15Merge remote-tracking branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: hw/virtio-pci.c
2011-06-12hw/ide/ich.c: convert to PCIDeviceInfo to initialize idsIsaku Yamahata
use PCIDeviceInfo to initialize ids. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-16ahci: Unbreak bar registrationJan Kiszka
Fix regression of 667bb59: ahci_init initializes ahci.mem, so we have to move bar registration after it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-05-16ich/ahci: fix uninitialized memory useMichael S. Tsirkin
The commit 667bb59d2358daeef179583c944becba3f1f9680 uses d->ahci.mem before it is initialized by ahci_init(). Fix this by calling ahci_init() first thing so that it's safe to use all fields in the ahci state struct. Reported-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: exec.c
2011-05-05MSI: Robust resource releaseJan Kiszka
msi_init may fail, so we need to check on uninit if the cap was actually installed. This also avoids that the users need to check. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 09:10:22 +0000