| Age | Commit message (Collapse) | Author |
|---|
|
A guest which has configured the per-vCPU upcall vector may set the
HVM_PARAM_CALLBACK_IRQ param to fairly much anything other than zero.
For example, Linux v6.0+ after commit b1c3497e604 ("x86/xen: Add support
for HVMOP_set_evtchn_upcall_vector") will just do this after setting the
vector:
/* Trick toolstack to think we are enlightened. */
if (!cpu)
rc = xen_set_callback_via(1);
That's explicitly setting the delivery to GSI#1, but it's supposed to be
overridden by the per-vCPU vector setting. This mostly works in Qemu
*except* for the logic to enable the in-kernel handling of event channels,
which falsely determines that the kernel cannot accelerate GSI delivery
in this case.
Add a kvm_xen_has_vcpu_callback_vector() to report whether vCPU#0 has
the vector set, and use that in xen_evtchn_set_callback_param() to
enable the kernel acceleration features even when the param *appears*
to be set to target a GSI.
Preserve the Xen behaviour that when HVM_PARAM_CALLBACK_IRQ is set to
*zero* the event channel delivery is disabled completely. (Which is
what that bizarre guest behaviour is working round in the first place.)
Cc: qemu-stable@nongnu.org
Fixes: 91cce756179 ("hw/xen: Add xen_evtchn device for event channel emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
staging
* Fix global variable shadowing in test code
* Avoid recompiling libfdt in the FreeBSD VM
* Mark old pc machine types as deprecated
* Force IPv4 in the ipmi-bt-test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmU7g+wRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWzIQ//WkiEtXAB4zn/b8H0KfRF283FoFMstBPu
# xrF90WcXMidAPRK8iFhwlae0rVyo40V6A3+/0rntMZ6WPJ3pVvFhmM4zIQgX+1+F
# HT8To7ngngeEey5gJNbOs9GdAFSmF8HwB+HWnEGf2fjWsUvIWgm458ikPUWvhXaJ
# 08wH4V+bmEAKYgny8/ys70E1iFeMwfg+LKXHzVAavaQ8GjM9xFXOjRe8XEq2P7/8
# T99O+hn1iGJfrvZTdJ01awRuOUzA1YTKLCYNSzfRc/j0eYwI28CBm12/sZn4dUA8
# 4rV33ISPw55QmxdVLCfGhAJ6Ih0trOgf8eDBkhcgqWt26ymcKyVL/7kJHcuoY9Q2
# onaN3XT39lVz/HmcuTl9a0sePsZd4d7p0vRsccwTSisX8RpLDab8I8oU8Nvs3VQG
# t23K3XLrdSyMbxsbi9b5BdXJVgkz4irEKG1dX8laIGMGD5zVi/LX2BWjP6QaIOZi
# OyopRQN2uTi6cry5NmblpeLDNJwQdQVxJKlqcvDQQl8TjPXleNtIXL4dr+IpNC5T
# Uo8GJ6+b+AzUI4EaNFybVDPAYHFMJKxvN/QUEjExKV1QTP3V2V9jCbGCF8nio8pp
# ISo11Lo/Z4Z39NwDBH13UuSOdD1rlrU2uuq6LaiRTBfCOTYumzUMvlDTNYqGuSLr
# +1q1GTGsHO0=
# =A6CT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 27 Oct 2023 18:33:32 JST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-10-27' of https://gitlab.com/thuth/qemu:
ipmi-bt-test: force ipv4
tests/vm/freebsd: Add additional library paths for libfdt
docs/about: Mark the old pc-i440fx-2.0 - 2.3 machine types as deprecated
tests/coroutine: Clean up global variable shadowing
tests/aio: Clean up global variable shadowing
tests/npcm7xx_adc: Clean up global variable shadowing
tests/rtl8139: Clean up global variable shadowing
tests/cdrom-test: Clean up global variable shadowing in prepare_image()
tests/virtio-scsi: Clean up global variable shadowing
tests/throttle: Clean up global variable shadowing
system/qtest: Clean up global variable shadowing in qtest_server_init()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
As we've seen in the past, it's useful for deprecating old machine
types to finally be able to get of legacy code or do other clean-ups
(see e.g. commit ea985d235b868047 that was used to drop the PCI code in
the 128k bios binaries to free some precious space in those binaries).
So let's continue deprecating the oldest pc machine types. QEMU 2.3
has been released 8 years ago, so that's plenty of time since such
machine types have been used by default, thus deprecating pc-i440fx-2.0
up to pc-i440fx-2.3 should be fine nowadays.
Message-ID: <20231006075247.403364-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This was introduced in KVM in Linux 2.6.33, we can require it
unconditionally. KVM_CLOCK_TSC_STABLE was only added in Linux 4.9,
for now do not require it (though it would allow the removal of some
pretty yucky code).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
A generic X86IOMMUClass->int_remap function should not return VT-d
specific values; fix it to return 0 if the interrupt was successfully
translated or -EINVAL if not.
The VTD_FR_IR_xxx values are supposed to be used to actually raise
faults through the fault reporting mechanism, so do that instead for
the case where the IRQ is actually being injected.
There is more work to be done here, as pretranslations for the KVM IRQ
routing table can't fault; an untranslatable IRQ should be handled in
userspace and the fault raised only when the IRQ actually happens (if
indeed the IRTE is still not valid at that time). But we can work on
that later; we can at least raise faults for the direct case.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <31bbfc9041690449d3ac891f4431ec82174ee1b4.camel@infradead.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add a simple _DSM call support for the ACPI0017 device to return fake QTG
ID values of 0 and 1 in all cases. This for _DSM plumbing testing from the OS.
Following edited for readability
Device (CXLM)
{
Name (_HID, "ACPI0017") // _HID: Hardware ID
...
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
If ((Arg0 == ToUUID ("f365f9a6-a7de-4071-a66a-b40c0b4f8e52")))
{
If ((Arg2 == Zero))
{
Return (Buffer (One) { 0x01 })
}
If ((Arg2 == One))
{
Return (Package (0x02)
{
One,
Package (0x02)
{
Zero,
One
}
})
}
}
}
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231012125623.21101-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
pc_get_device_memory_range() finds the device memory size by calculating the
difference between maxram and ram sizes. This calculation makes sense only when
maxram is greater than the ram size. Make sure we check for that before calling
pc_get_device_memory_range().
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231011105335.42296-1-anisinha@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
QEMU's PIIX3 implementation actually models the real PIIX4, but with different
PCI IDs. Usually, guests deal just fine with it. Still, in order to provide a
more consistent illusion to guests, allow QEMU's PIIX4 implementation to be used
in the PC machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-30-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the PC machine, the PIT is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-22-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the PC machine, the PIC is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-21-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that the PIIX3 and PIIX4 device models are sufficiently prepared, their
implementations can be merged into one file for further consolidation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-20-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The power management controller is an integral part of PIIX3 (function 3). So
create it as part of the south bridge.
Note that the ACPI function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-14-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The USB controller is an integral part of PIIX3 (function 2). So create
it as part of the south bridge.
Note that the USB function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-13-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The IDE controller is an integral part of PIIX3 (function 1). So create it as
part of the south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-12-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Makes the south bridges a bit more self-contained and aligns PIIX3 more with
PIIX4. The latter is needed for consolidating the PIIX south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Thie PIIX3 south bridge implements both the PIC and the ISA bus, so wiring the
interrupts there makes the device model more self-contained. Furthermore, this
allows the ISA interrupts to be wired to internal child devices in
pci_piix3_realize() which will be performed in subsequent patches.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When the board assigns the ISA IRQs after the device's realize(), internal
devices such as the RTC can't be wired in ich9_lpc_realize() since the qemu_irqs
are still NULL. Fix that by assigning the ISA interrupts before realize().
This change is necessary for PIIX consolidation because PIIX4 wires the RTC
interrupts in its realize() method, so PIIX3 needs to do so as well. Since the
PC and Q35 boards share RTC code, and since PIIX3 needs the change, ICH9 needs
to be adapted as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The variable is never used by its declared type. Eliminate it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Avoid assigning the private member of struct PIIX3State from outside which goes
against best QOM practices. Instead, implement best QOM practice by adding an
"isa-irqs" array property to TYPE_PIIX3_DEVICE and assign it in board code, i.e.
from outside.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Unlike its PIIX4 counterpart, TYPE_PIIX3_DEVICE doesn't instantiate a PIC
itself. Instead, it relies on the board to do so. This means that the board
needs to wire the ISA IRQs to the PIIX3 device model. As long as the board
assigns the ISA IRQs after PIIX3's realize(), internal devices can't be wired in
pci_piix3_realize() since the qemu_irqs are still NULL. Fix that by assigning
the ISA interrupts before realize(). This will allow for embedding child devices
into the host device as already done for PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
bridge
The next patches will need to take advantage of it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-3-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
By being the only entity assigning a non-NULL value to "rtc_irq", the first if
statement determines whether the second if statement is executed. So merge the
two statements into one.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
being identical
Commit 6103451aeb74 ("hw/i386: Build-time assertion on pc/q35 reset register
being identical.") introduced a build-time check where the addresses of the
reset registers are expected to be equal. Back then rev3 of the FADT was used
which required the reset register to be populated and there was common code.
In commit 3a3fcc75f92a ("pc: acpi: force FADT rev1 for 440fx based machine
types") the FADT was downgraded to rev1 for PIIX where the reset register isn't
available. Thus, there is no need for the assertion any longer, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231004092355.12929-1-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
sysbus_mmio_map() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231018141151.87466-7-philmd@linaro.org>
|
|
There is no point in exposing an internal MMIO region via
SysBus and directly mapping it in the very same device.
Just map it without using the SysBus API.
Transformation done using the following coccinelle script:
@@
expression sbdev;
expression index;
expression addr;
expression subregion;
@@
- sysbus_init_mmio(sbdev, subregion);
... when != sbdev
- sysbus_mmio_map(sbdev, index, addr);
+ memory_region_add_subregion(get_system_memory(), addr, subregion);
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231018141151.87466-3-philmd@linaro.org>
|
|
There is no point in exposing an internal MMIO region via
SysBus and directly mapping it in the very same device.
Just map it without using the SysBus API.
Transformation done using the following coccinelle script:
@@
expression sbdev;
expression index;
expression addr;
expression subregion;
@@
- sysbus_init_mmio(sbdev, subregion);
... when != sbdev
- sysbus_mmio_map(sbdev, index, addr);
+ memory_region_add_subregion(get_system_memory(), addr, subregion);
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231018141151.87466-2-philmd@linaro.org>
|
|
pcspk_init() is a legacy init function, inline and remove it.
Since the device is realized using &error_fatal, use the same
error for setting the "pit" link.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231019073307.99608-1-philmd@linaro.org>
|
|
xen_ss is added unconditionally to arm_ss and i386_ss (the only
targets that can have CONFIG_XEN enabled) and its contents are gated by
CONFIG_XEN; xen_specific_ss has no condition for its constituent files
but is gated on CONFIG_XEN when its added to specific_ss.
So xen_ss is a duplicate of xen_specific_ss, though defined in a
different way. Merge the two by eliminating xen_ss.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Code changes that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local variables shadowing
other local variables or parameters. These makes the code confusing and/or adds
bugs that are difficult to catch.
See also
Subject: Help wanted for enabling -Wshadow=local
Message-Id: <87r0mqlf9x.fsf@pond.sub.org>
https://lore.kernel.org/qemu-devel/87r0mqlf9x.fsf@pond.sub.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Philippe Mathieu-Daude <philmd@linaro.org>
CC: mst@redhat.com
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20231003102803.6163-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd5d ("hw/core: remove needless
includes") because it removed an adjacent #include.
|
|
accel: Introduce AccelClass::cpu_common_[un]realize
accel: Target agnostic code movement
accel/tcg: Cleanups to use CPUState instead of CPUArchState
accel/tcg: Move CPUNegativeOffsetState into CPUState
tcg: Split out tcg init functions to tcg/startup.h
linux-user/hppa: Fix struct target_sigcontext layout
build: Remove --enable-gprof
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmUdsL4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/iYggAvDJEyMCAXSSH97BA
# wZT/2D/MFIhOMk6xrQRnrXfrG70N0iVKz44jl9j7k1D+9BOHcso//DDJH3c96k9A
# MgDb6W2bsWvC15/Qw6BALf5bb/II0MJuCcQvj3CNX5lNkXAWhwIOBhsZx7V9ST1+
# rihN4nowpRWdV5GeCjDGaJW455Y1gc96hICYHy6Eqw1cUgUFt9vm5aYU3FHlat29
# sYRaVYKUL2hRUPPNcPiPq0AaJ8wN6/s8gT+V1UvTzkhHqskoM4ZU89RchuXVoq1h
# SvhKElyULMRzM7thWtpW8qYJPj4mxZsKArESvHjsunGD6KEz3Fh1sy6EKRcdmpG/
# II1vkg==
# =k2Io
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 14:36:46 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20231004' of https://gitlab.com/rth7680/qemu: (47 commits)
tcg/loongarch64: Fix buid error
tests/avocado: Re-enable MIPS Malta tests (GitLab issue #1884 fixed)
build: Remove --enable-gprof
linux-user/hppa: Fix struct target_sigcontext layout
tcg: Split out tcg init functions to tcg/startup.h
tcg: Remove argument to tcg_prologue_init
accel/tcg: Make cpu-exec-common.c a target agnostic unit
accel/tcg: Make icount.o a target agnostic unit
accel/tcg: Make monitor.c a target-agnostic unit
accel/tcg: Rename target-specific 'internal.h' -> 'internal-target.h'
exec: Rename target specific page-vary.c -> page-vary-target.c
exec: Rename cpu.c -> cpu-target.c
accel: Rename accel-common.c -> accel-target.c
accel: Make accel-blocker.o target agnostic
accel/tcg: Restrict dump_exec_info() declaration
exec: Move cpu_loop_foo() target agnostic functions to 'cpu-common.h'
exec: Make EXCP_FOO definitions target agnostic
accel/tcg: move ld/st helpers to ldst_common.c.inc
accel/tcg: Unify user and softmmu do_[st|ld]*_mmu()
accel/tcg: Remove env_tlb()
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features, hotplugging memory devices are not
supported by QEMU as QEMU always places hotplugged memory above 4 GiB boundary
which is beyond the physical address space of the processor. Linux guests also
does not support memory hotplug on those systems. Please see Linux
kernel commit b59d02ed08690 ("mm/memory_hotplug: disable the functionality
for 32b") for more details.
Therefore, the maximum limit of the guest physical address in the absence of
additional memory devices effectively coincides with the end of
"above 4G memory space" region for 32-bit x86 without PAE/PSE36. When users
configure additional memory devices, after properly accounting for the
additional device memory region to find the maximum value of the guest
physical address, the address will be outside the range of the processor's
physical address space.
This change adds improvements to take above into consideration.
For example, previously this was allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
With this change now it is no longer allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
qemu-system-x86_64: Address space limit 0xffffffff < 0x2bfffffff phys-bits too low (32)
However, the following are allowed since on both cases physical address
space of the processor is 36 bits:
$ ./qemu-system-x86_64 -cpu pentium2 -m size=10G
$ ./qemu-system-x86_64 -cpu pentium,pse36=on -m size=10G
For 32-bit, without PAE/PSE36, hotplugging additional memory is no longer allowed.
$ ./qemu-system-i386 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
$ ./qemu-system-i386 -machine q35 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
A new compatibility flag is introduced to make sure pc_max_used_gpa() keeps
returning the old value for machines 8.1 and older.
Therefore, the above is still allowed for older machine types in order to support
compatibility. Hence, the following still works:
$ ./qemu-system-i386 -machine pc-i440fx-8.1 -m size=1G,maxmem=3G,slots=2
$ ./qemu-system-i386 -machine pc-q35-8.1 -m size=1G,maxmem=3G,slots=2
Further, following is also allowed as with PSE36, the processor has 36-bit
address space:
$ ./qemu-system-i386 -cpu 486,pse36=on -m size=1G,maxmem=3G,slots=2
After calling CPUID with EAX=0x80000001, all AMD64 compliant processors
have the longmode-capable-bit turned on in the extended feature flags (bit 29)
in EDX. The absence of CPUID longmode can be used to differentiate between
32-bit and 64-bit processors and is the recommended approach. QEMU takes this
approach elsewhere (for example, please see x86_cpu_realizefn()), With
this change, pc_max_used_gpa() also uses the same method to detect 32-bit
processors.
Unit tests are modified to not run 32-bit x86 tests that use memory hotplug.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230922160413.165702-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
An MSI from I/O APIC may not exactly equal to APIC_DEFAULT_ADDRESS. In
fact, Windows 17763.3650 configures I/O APIC to set the dest_mode bit.
Cover the range assigned to APIC.
Fixes: 577c470f43 ("x86_iommu/amd: Prepare for interrupt remap support")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230921114612.40671-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The SMI command port is currently hardcoded by means of the ACPI_PORT_SMI_CMD
macro. This hardcoding is Intel specific and doesn't match VIA, for example.
There is already the AcpiFadtData::smi_cmd attribute which is used when building
the FADT. Let's also use it when building the DSDT which confines SMI command
port determination to just one place. This allows it to become a property later,
thus resolving the Intel assumption.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that TYPE_ACPI_GED_X86 doesn't assign AcpiDeviceIfClass::madt_cpu any more
it is the same as TYPE_ACPI_GED.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.
Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
build_cpus_aml() is architecture independent but needs to create architecture-
specific CPU AML. So far this was achieved by using a virtual method from
TYPE_ACPI_DEVICE_IF. However, build_cpus_aml() would resolve this interface from
global (!) state. This makes it quite incomprehensible where this interface
comes from (TYPE_PIIX4_PM?, TYPE_ICH9_LPC_DEVICE?, TYPE_ACPI_GED_X86?) an can
lead to crashes when the generic code is ported to new architectures.
So far, build_cpus_aml() is only called in architecture-specific code -- and
only in x86. We can therefore simply pass pc_madt_cpu_entry() as callback to
build_cpus_aml(). This is the same callback that would be used through
TYPE_ACPI_DEVICE_IF.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is x86-specific code, so there is no advantage in using
pc_madt_cpu_entry() behind an architecture-agnostic interface.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The include list is gigantic, make it smaller.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
This patch fixes the warning of shadowed local variable:
../hw/i386/intel_iommu.c: In function ‘vtd_address_space_unmap’:
../hw/i386/intel_iommu.c:3773:18: warning: declaration of ‘size’ shadows a previous local [-Wshadow=compatible-local]
3773 | uint64_t size = mask + 1;
| ^~~~
../hw/i386/intel_iommu.c:3747:12: note: shadowed declaration is here
3747 | hwaddr size, remain;
| ^~~~
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230922160410.138786-1-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Code changes in acpi that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local variables shadowing
other local variables or parameters. These makes the code confusing and/or adds
bugs that are difficult to catch. See also
Subject: Help wanted for enabling -Wshadow=local
Message-Id: <87r0mqlf9x.fsf@pond.sub.org>
https://lore.kernel.org/qemu-devel/87r0mqlf9x.fsf@pond.sub.org
The code is tested to build with and without the flag turned on.
CC: Markus Armbruster <armbru@redhat.com>
CC: Philippe Mathieu-Daude <philmd@linaro.org>
CC: mst@redhat.com
CC: imammedo@redhat.com
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20230922124203.127110-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
These are the last users of the 128K SeaBIOS blob in the i440FX family.
Removing them allows us to drop PCI support from the 128K blob,
thus making it easier to update SeaBIOS to newer versions.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- The comment is incorrectly indented / formatted.
- The comment states a 8MB limit, even though the code enforces a 16MB
limit.
Both of these warts come from commit 0657c657eb37 ("hw/i386/pc: add max
combined fw size as machine configuration option", 2020-12-09); clean them
up.
Arguably, it's also better to be consistent with the binary units (such as
"MiB") that QEMU uses nowadays.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:PC)
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> (supporter:PC)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86 TCG CPUs)
Cc: Richard Henderson <richard.henderson@linaro.org> (maintainer:X86 TCG CPUs)
Cc: Eduardo Habkost <eduardo@habkost.net> (maintainer:X86 TCG CPUs)
Cc: qemu-trivial@nongnu.org
Fixes: 0657c657eb37
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
It's weird to shift x & y without obvious reason. Let's make this more
explicit and future-proof.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
