| Age | Commit message (Collapse) | Author |
|---|
|
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The way that Xen handles MSI PIRQs is kind of awful.
There is a special MSI message which targets a PIRQ. The vector in the
low bits of data must be zero. The low 8 bits of the PIRQ# are in the
destination ID field, the extended destination ID field is unused, and
instead the high bits of the PIRQ# are in the high 32 bits of the address.
Using the high bits of the address means that we can't intercept and
translate these messages in kvm_send_msi(), because they won't be caught
by the APIC — addresses like 0x1000fee46000 aren't in the APIC's range.
So we catch them in pci_msi_trigger() instead, and deliver the event
channel directly.
That isn't even the worst part. The worst part is that Xen snoops on
writes to devices' MSI vectors while they are *masked*. When a MSI
message is written which looks like it targets a PIRQ, it remembers
the device and vector for later.
When the guest makes a hypercall to bind that PIRQ# (snooped from a
marked MSI vector) to an event channel port, Xen *unmasks* that MSI
vector on the device. Xen guests using PIRQ delivery of MSI don't
ever actually unmask the MSI for themselves.
Now that this is working we can finally enable XENFEAT_hvm_pirqs and
let the guest use it all.
Tested with passthrough igb and emulated e1000e + AHCI.
CPU0 CPU1
0: 65 0 IO-APIC 2-edge timer
1: 0 14 xen-pirq 1-ioapic-edge i8042
4: 0 846 xen-pirq 4-ioapic-edge ttyS0
8: 1 0 xen-pirq 8-ioapic-edge rtc0
9: 0 0 xen-pirq 9-ioapic-level acpi
12: 257 0 xen-pirq 12-ioapic-edge i8042
24: 9600 0 xen-percpu -virq timer0
25: 2758 0 xen-percpu -ipi resched0
26: 0 0 xen-percpu -ipi callfunc0
27: 0 0 xen-percpu -virq debug0
28: 1526 0 xen-percpu -ipi callfuncsingle0
29: 0 0 xen-percpu -ipi spinlock0
30: 0 8608 xen-percpu -virq timer1
31: 0 874 xen-percpu -ipi resched1
32: 0 0 xen-percpu -ipi callfunc1
33: 0 0 xen-percpu -virq debug1
34: 0 1617 xen-percpu -ipi callfuncsingle1
35: 0 0 xen-percpu -ipi spinlock1
36: 8 0 xen-dyn -event xenbus
37: 0 6046 xen-pirq -msi ahci[0000:00:03.0]
38: 1 0 xen-pirq -msi-x ens4
39: 0 73 xen-pirq -msi-x ens4-rx-0
40: 14 0 xen-pirq -msi-x ens4-rx-1
41: 0 32 xen-pirq -msi-x ens4-tx-0
42: 47 0 xen-pirq -msi-x ens4-tx-1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
If I advertise XENFEAT_hvm_pirqs then a guest now boots successfully as
long as I tell it 'pci=nomsi'.
[root@localhost ~]# cat /proc/interrupts
CPU0
0: 52 IO-APIC 2-edge timer
1: 16 xen-pirq 1-ioapic-edge i8042
4: 1534 xen-pirq 4-ioapic-edge ttyS0
8: 1 xen-pirq 8-ioapic-edge rtc0
9: 0 xen-pirq 9-ioapic-level acpi
11: 5648 xen-pirq 11-ioapic-level ahci[0000:00:04.0]
12: 257 xen-pirq 12-ioapic-edge i8042
...
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
This wires up the basic infrastructure but the actual interrupts aren't
there yet, so don't advertise it to the guest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Just hook up the basic hypercalls to stubs in xen_evtchn.c for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
It isn't strictly mandatory but Linux guests at least will only map
their grant tables over the dummy BAR that it provides, and don't have
sufficient wit to map them in any other unused part of their guest
address space. So include it by default for minimal surprise factor.
As I come to document "how to run a Xen guest in QEMU", this means one
fewer thing to tell the user about, according to the mantra of "if it
needs documenting, fix it first, then document what remains".
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Extract requests, return ENOSYS to all of them. This is enough to allow
older Linux guests to boot, as they need *something* back but it doesn't
matter much what.
A full implementation of a single-tentant internal XenStore copy-on-write
tree with transactions and watches is waiting in the wings to be sent in
a subsequent round of patches along with hooking up the actual PV disk
back end in qemu, but this is enough to get guests booting for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Just the basic shell, with the event channel hookup. It only dumps the
buffer for now; a real ring implmentation will come in a subsequent patch.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The provides the QEMU side of interdomain event channels, allowing events
to be sent to/from the guest.
The API mirrors libxenevtchn, and in time both this and the real Xen one
will be available through ops structures so that the PV backend drivers
can use the correct one as appropriate.
For now, this implementation can be used directly by our XenStore which
will be for emulated mode only.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Introduce support for one shot and periodic mode of Xen PV timers,
whereby timer interrupts come through a special virq event channel
with deadlines being set through:
1) set_timer_op hypercall (only oneshot)
2) vcpu_op hypercall for {set,stop}_{singleshot,periodic}_timer
hypercalls
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The guest is permitted to specify an arbitrary domain/bus/device/function
and INTX pin from which the callback IRQ shall appear to have come.
In QEMU we can only easily do this for devices that actually exist, and
even that requires us "knowing" that it's a PCMachine in order to find
the PCI root bus — although that's OK really because it's always true.
We also don't get to get notified of INTX routing changes, because we
can't do that as a passive observer; if we try to register a notifier
it will overwrite any existing notifier callback on the device.
But in practice, guests using PCI_INTX will only ever use pin A on the
Xen platform device, and won't swizzle the INTX routing after they set
it up. So this is just fine.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The GSI callback (and later PCI_INTX) is a level triggered interrupt. It
is asserted when an event channel is delivered to vCPU0, and is supposed
to be cleared when the vcpu_info->evtchn_upcall_pending field for vCPU0
is cleared again.
Thankfully, Xen does *not* assert the GSI if the guest sets its own
evtchn_upcall_pending field; we only need to assert the GSI when we
have delivered an event for ourselves. So that's the easy part, kind of.
There's a slight complexity in that we need to hold the BQL before we
can call qemu_set_irq(), and we definitely can't do that while holding
our own port_lock (because we'll need to take that from the qemu-side
functions that the PV backend drivers will call). So if we end up
wanting to set the IRQ in a context where we *don't* already hold the
BQL, defer to a BH.
However, we *do* need to poll for the evtchn_upcall_pending flag being
cleared. In an ideal world we would poll that when the EOI happens on
the PIC/IOAPIC. That's how it works in the kernel with the VFIO eventfd
pairs — one is used to trigger the interrupt, and the other works in the
other direction to 'resample' on EOI, and trigger the first eventfd
again if the line is still active.
However, QEMU doesn't seem to do that. Even VFIO level interrupts seem
to be supported by temporarily unmapping the device's BARs from the
guest when an interrupt happens, then trapping *all* MMIO to the device
and sending the 'resample' event on *every* MMIO access until the IRQ
is cleared! Maybe in future we'll plumb the 'resample' concept through
QEMU's irq framework but for now we'll do what Xen itself does: just
check the flag on every vmexit if the upcall GSI is known to be
asserted.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Specifically add listing, injection of event channels.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Add the array of virq ports to each vCPU so that we can deliver timers,
debug ports, etc. Global virqs are allocated against vCPU 0 initially,
but can be migrated to other vCPUs (when we implement that).
The kernel needs to know about VIRQ_TIMER in order to accelerate timers,
so tell it via KVM_XEN_VCPU_ATTR_TYPE_TIMER. Also save/restore the value
of the singleshot timer across migration, as the kernel will handle the
hypercalls automatically now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
This finally comes with a mechanism for actually injecting events into
the guest vCPU, with all the atomic-test-and-set that's involved in
setting the bit in the shinfo, then the index in the vcpu_info, and
injecting either the lapic vector as MSI, or letting KVM inject the
bare vector.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
It calls an internal close_port() helper which will also be used from
EVTCHNOP_reset and will actually do the work to disconnect/unbind a port
once any of that is actually implemented in the first place.
That in turn calls a free_port() internal function which will be in
error paths after allocation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
This adds the basic structure for maintaining the port table and reporting
the status of ports therein.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Include basic support for setting HVM_PARAM_CALLBACK_IRQ to the global
vector method HVM_PARAM_CALLBACK_TYPE_VECTOR, which is handled in-kernel
by raising the vector whenever the vCPU's vcpu_info->evtchn_upcall_pending
flag is set.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Xen will "latch" the guest's 32-bit or 64-bit ("long mode") setting when
the guest writes the MSR to fill in the hypercall page, or when the guest
sets the event channel callback in HVM_PARAM_CALLBACK_IRQ.
KVM handles the former and sets the kernel's long_mode flag accordingly.
The latter will be handled in userspace. Keep them in sync by noticing
when a hypercall is made in a mode that doesn't match qemu's idea of
the guest mode, and resyncing from the kernel. Do that same sync right
before serialization too, in case the guest has set the hypercall page
but hasn't yet made a system call.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The xen_overlay device (and later similar devices for event channels and
grant tables) need to be instantiated. Do this from a kvm_type method on
the PC machine derivatives, since KVM is only way to support Xen emulation
for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
For the shared info page and for grant tables, Xen shares its own pages
from the "Xen heap" to the guest. The guest requests that a given page
from a certain address space (XENMAPSPACE_shared_info, etc.) be mapped
to a given GPA using the XENMEM_add_to_physmap hypercall.
To support that in qemu when *emulating* Xen, create a memory region
(migratable) and allow it to be mapped as an overlay when requested.
Xen theoretically allows the same page to be mapped multiple times
into the guest, but that's hard to track and reinstate over migration,
so we automatically *unmap* any previous mapping when creating a new
one. This approach has been used in production with.... a non-trivial
number of guests expecting true Xen, without any problems yet being
noticed.
This adds just the shared info page for now. The grant tables will be
a larger region, and will need to be overlaid one page at a time. I
think that means I need to create separate aliases for each page of
the overall grant_frames region, so that they can be mapped individually.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The only thing we need to fix to make this build is the PIO hack which
sets the BIOS memory areas to R/W v.s. R/O. Theoretically we could hook
that up to the PAM registers on the emulated PIIX, but in practice
nobody cares, so just leave it doing nothing.
Now it builds without actual Xen, move it to CONFIG_XEN_BUS to include it
in the KVM-only builds.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
Such that PCI passthrough devices work for Xen emulated guests.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to
run the gauntlet of struct layout compatibility, errno mapping, and the
rest of that fui).
It will also cover the support for architecture-independent grant table
and event channel support which will be added in hw/i386/kvm/ (on the
basis that the non-KVM support is very theoretical and making it not use
KVM directly seems like gratuitous overengineering at this point).
The XEN_BUS option is for the xenfv platform support, which will now be
used both by XEN_EMU and by real Xen.
The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XEN_BUS over time as the direct dependencies on
Xen runtime libraries are eliminated. The Xen PCI platform device will
also reside under CONFIG_XEN_BUS.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
ide_get_geometry() and ide_get_bios_chs_trans() are only
used by the TYPE_PC_MACHINE.
"hw/ide.h" is a mixed bag of lost IDE declarations. In order
to remove this (almost) pointless header soon, move these
declarations to "hw/ide/internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230220091358.17038-18-philmd@linaro.org>
|
|
"hw/ide.h" is a mixed bag of lost IDE declarations.
Extract isa_ide_init() and the TYPE_ISA_IDE QOM declarations
to a new "hw/ide/isa.h" header.
Rename ISAIDEState::isairq as 'irqnum' to emphasize this is
not a qemu_irq object but the number (index) of an ISA IRQ.
Message-Id: <20230215112712.23110-5-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20230220092707.22584-1-philmd@linaro.org>
|
|
rtc_get_memory() and rtc_set_memory() helpers only work with
TYPE_MC146818_RTC devices. 'memory' in their name refer to
the CMOS region. Rename them as mc146818rtc_get_cmos_data()
and mc146818rtc_set_cmos_data() to be explicit about what
they are doing.
Mechanical change doing:
$ sed -i -e 's/rtc_set_memory/mc146818rtc_set_cmos_data/g' \
$(git grep -wl rtc_set_memory)
$ sed -i -e 's/rtc_get_memory/mc146818rtc_get_cmos_data/g' \
$(git grep -wl rtc_get_memory)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-4-philmd@linaro.org>
|
|
rtc_get_memory() and rtc_set_memory() methods can not take any
TYPE_ISA_DEVICE object. They expect a TYPE_MC146818_RTC one.
Simplify the API by passing a MC146818RtcState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210233116.80311-3-philmd@linaro.org>
|
|
isa_bus_irqs() register an array of input IRQs on
the ISA bus. Rename it as isa_bus_register_input_irqs().
Mechanical change using:
$ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \
$(git grep -wl isa_bus_irqs)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230210163744.32182-10-philmd@linaro.org>
|
|
ICH9 is a south bridge which doesn't necessarily depend on x86, so move
it into the southbridge folder, analoguous to PIIX.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-13-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The ioapic sources reside in hw/intc already. Move the headers there
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-11-shentey@gmail.com>
[PMD: Keep ioapic_internal.h in hw/intc/, not under include/]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Most code uses IOAPIC_NUM_PINS. The only place where GSI_NUM_PINS defines
the size of an array is ICH9LPCState::gsi which needs to match
IOAPIC_NUM_PINS. Remove GSI_NUM_PINS for consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Make TYPE_ICH9_LPC_DEVICE more self-contained by moving the call to
ich9_lpc_pm_init() from board code to its realize function. In order
to propagate x86_machine_is_smm_enabled(), introduce an "smm-enabled"
property like we have in piix4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
TYPE_ICH9_LPC_DEVICE
This is a preparation to make the next patch cleaner.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
ich9_smb_init() is a legacy init function, so modernize the code.
Note that the smb_io_base parameter was unused.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
By using qdev_get_child_bus() we can eliminate ICH9LPCState::isa_bus and
spare the ich9_lpc variable in pc_q35, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
No need to rely on the board to wire up the ICH9 PCI IRQs. All functions
access private state of the LPC device which suggests that it should
wire up the IRQs.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
This function is not used anywhere outside this file, so
we can delete the prototype from include/hw/i386/x86.h and
make the function "static void".
This fixes when building with -Wall and using Clang
("Apple clang version 14.0.0 (clang-1400.0.29.202)"):
../hw/i386/x86.c:70:24: error: static function 'MACHINE' is used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
MachineState *ms = MACHINE(x86ms);
^
include/hw/i386/x86.h:101:1: note: use 'static' to give inline function 'init_topo_info' internal linkage
void init_topo_info(X86CPUTopoInfo *topo_info, const X86MachineState *x86ms);
^
static
include/hw/boards.h:24:49: note: 'MACHINE' declared here
OBJECT_DECLARE_TYPE(MachineState, MachineClass, MACHINE)
^
Reported-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220158.6317-6-philmd@linaro.org>
|
