aboutsummaryrefslogtreecommitdiff
path: root/hw/i386
AgeCommit message (Collapse)Author
2018-08-27intel-iommu: replace more vtd_err_* tracesPeter Xu
Replace all the trace_vtd_err_*() hooks with the new error_report_once() since they are similar to trace_vtd_err() - dumping the first error would be mostly enough, then we have them on by default too. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815095328.32414-4-peterx@redhat.com> [Use "%x" instead of "%" PRIx16 to print uint16_t, whitespace tidied up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-27intel-iommu: start to use error_report_oncePeter Xu
Replace existing trace_vtd_err() with error_report_once() then stderr will capture something if any of the error happens, meanwhile we don't suffer from any DDOS. Then remove the trace point. Since at it, provide more information where proper (now we can pass parameters into the report function). Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815095328.32414-3-peterx@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [Two format strings fixed, whitespace tidied up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-23pc-dimm: assign and verify the "addr" property during pre_plugDavid Hildenbrand
We can assign and verify the address before realizing and trying to plug. reading/writing the address property should never fail for DIMMs, so let's reduce error handling a bit by using &error_abort. Getting access to the memory region now might however fail. So forward errors from get_memory_region() properly. As all memory devices should use the alignment of the underlying memory region for guest physical address asignment, do detection of the alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the alignment for compatibility handling. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180801133444.11269-5-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23pc: drop memory region alignment check for 0David Hildenbrand
All applicable memory regions always have an alignment > 0. All memory backends result in file_ram_alloc() or qemu_anon_ram_alloc() getting called, setting the alignment to > 0. So a PCDIMM memory region always has an alignment > 0. NVDIMM copy the alignment of the original memory memory region into the handcrafted memory region that will be used at this place. So the check for 0 can be dropped and we can reduce the special handling. Dropping this check makes factoring out of alignment handling easier as compat handling only has to look at pcmc->enforce_aligned_dimm and not care about the alignment of the memory region. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180801133444.11269-4-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23pc-dimm: assign and verify the "slot" property during pre_plugDavid Hildenbrand
We can assign and verify the slot before realizing and trying to plug. reading/writing the slot property should never fail, so let's reduce error handling a bit by using &error_abort. To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180801133444.11269-2-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-03pc: acpi: fix memory hotplug regression by reducing stub SRAT entry sizeIgor Mammedov
Commit 848a1cc1e (hw/acpi-build: build SRAT memory affinity structures for DIMM devices) broke the first dimm hotplug in following cases: 1: there is no coldplugged dimm in the last numa node but there is a coldplugged dimm in another node -m 4096,slots=4,maxmem=32G \ -object memory-backend-ram,id=m0,size=2G \ -device pc-dimm,memdev=m0,node=0 \ -numa node,nodeid=0 \ -numa node,nodeid=1 2: if order of dimms on CLI is: 1st plugged dimm in node1 2nd plugged dimm in node0 -m 4096,slots=4,maxmem=32G \ -object memory-backend-ram,size=2G,id=m0 \ -device pc-dimm,memdev=m0,node=1 \ -object memory-backend-ram,id=m1,size=2G \ -device pc-dimm,memdev=m1,node=0 \ -numa node,nodeid=0 \ -numa node,nodeid=1 (qemu) object_add memory-backend-ram,id=m2,size=1G (qemu) device_add pc-dimm,memdev=m2,node=0 the first DIMM hotplug to any node except the last one fails (Windows is unable to online it). Length reduction of stub hotplug memory SRAT entry, fixes issue for some reason. RHBZ: 1609234 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03hw/acpi-build: Add a check for memory-less NUMA nodesDou Liyang
Currently, Qemu ACPI builder doesn't consider the memory-less NUMA nodes, eg: -m 4G,slots=4,maxmem=8G \ -numa node,nodeid=0 \ -numa node,nodeid=1,mem=2G \ -numa node,nodeid=2,mem=2G \ -numa node,nodeid=3\ Guest Linux will report [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xffffffffffffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff] [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x13fffffff] [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug [mem 0x00000000-0xffffffffffffffff] and [mem 0x140000000-0x13fffffff] are bogus. Add a check to avoid building srat memory for memory-less NUMA nodes, also update the test file. Now the info in guest linux will be [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff] [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-07-17i386: only parse the initrd_filename once for multiboot modulesDaniel P. Berrangé
The multiboot code parses the initrd_filename twice, first to count how many entries there are, and second to process each entry. This changes the first loop to store the parse module names in a list, and the second loop can now use these names. This avoids having to pass NULL to the get_opt_value() method which means it can safely assume a non-NULL param. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20180514171913.17664-3-berrange@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Tested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-17i386: fix regression parsing multiboot initrd modulesDaniel P. Berrangé
The logic for parsing the multiboot initrd modules was messed up in commit 950c4e6c94b15cd0d8b63891dddd7a8dbf458e6a Author: Daniel P. Berrangé <berrange@redhat.com> Date: Mon Apr 16 12:17:43 2018 +0100 opts: don't silently truncate long option values Causing the length to be undercounter, and the number of modules over counted. It also passes NULL to get_opt_value() which was not robust at accepting a NULL value. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20180514171913.17664-2-berrange@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Tested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-16hyperv: ensure VP index equal to QEMU cpu_indexRoman Kagan
Hyper-V identifies vCPUs by Virtual Processor (VP) index which can be queried by the guest via HV_X64_MSR_VP_INDEX msr. It is defined by the spec as a sequential number which can't exceed the maximum number of vCPUs per VM. It has to be owned by QEMU in order to preserve it across migration. However, the initial implementation in KVM didn't allow to set this msr, and KVM used its own notion of VP index. Fortunately, the way vCPUs are created in QEMU/KVM makes it likely that the KVM value is equal to QEMU cpu_index. So choose cpu_index as the value for vp_index, and push that to KVM on kernels that support setting the msr. On older ones that don't, query the kernel value and assert that it's in sync with QEMU. Besides, since handling errors from vCPU init at hotplug time is impossible, disable vCPU hotplug. This patch also introduces accessor functions to encapsulate the mapping between a vCPU and its vp_index. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180702134156.13404-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-03Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, virtio: fixes A couple of fixes to amd iommu, and a fix to virtio iommu. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 28 Jun 2018 02:46:45 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: virtio-rng: process pending requests on DRIVER_OK hw/i386: Fix AMDVI GATS and HATS encodings hw/i386: Fix IVHD entry length for AMD IOMMU Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02hw/i386: Use the IEC binary prefix definitionsPaolo Bonzini
It eases code review, unit is explicit. Patch generated using: $ git grep -E '[<>][<>]=? ?[1-5]0' hw/ include/hw/ and modified manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw/xen: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alan Robinson <Alan.Robinson@ts.fujitsu.com> Message-Id: <20180625124238.25339-12-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28hmp: obsolete "info ioapic"Peter Xu
Let's start to use "info pic" just like other platforms. For now we keep the command for a while so that old users can know what is the new command to use. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20171229073104.3810-6-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28ioapic: support "info irq"Peter Xu
This include both userspace and in-kernel ioapic. Note that the numbers can be inaccurate for kvm-ioapic. One reason is the same with kvm-i8259, that when irqfd is used, irqs can be delivered all inside kernel without our notice. Meanwhile, kvm-ioapic is specially treated when irq numbers <ISA_NUM_IRQS, those irqs will be delivered in kernel too via kvm-i8259 (please refer to kvm_pc_gsi_handler). Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20171229073104.3810-5-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: get_memory_region() will not fail after realizeDavid Hildenbrand
Let's try to reduce error handling a bit. In the plug/unplug case, the device was realized and therefore we can assume that getting access to the memory region will not fail. For get_vmstate_memory_region() this is already handled that way. Document both cases. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-13-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc: factor out pc specific dimm checks into pc_memory_pre_plug()David Hildenbrand
We can perform these checks before the device is actually realized. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-6-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc-dimm: rename pc_dimm_memory_* to pc_dimm_*David Hildenbrand
Let's rename it to make it look more consistent. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-4-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pc: rename pc_dimm_(plug|unplug|...)* into pc_memory_(plug|unplug|...)*David Hildenbrand
Use a similar naming scheme as spapr. This way, we can go ahead and rename e.g. pc_dimm_memory_plug to pc_dimm_plug, which avoids confusion. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-3-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-26hw/i386: Fix AMDVI GATS and HATS encodingsJan Kiszka
We support up to 6 levels, but those are encoded as 10b according to the AMD IOMMU spec (chapter 3.3.1, Extended Feature Register). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-26hw/i386: Fix IVHD entry length for AMD IOMMUJan Kiszka
Counting from the IVHD ID field to the all-devices entry, we have 28 bytes, not 36. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-25hw/i386: Deprecate the machine types pc-0.10 and pc-0.11Thomas Huth
The oldest machine type which is still used in a still maintained distro is a pc-0.12 based machine type in RHEL6, so everything that is older than pc-0.12 should not be used anymore. Thus let's deprecate pc-0.10 and pc-0.11 so that we can finally remove them in a future release. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1529917512-10528-1-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-18hw/display: add standalone ramfb deviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20180613122948.18149-3-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-15iommu: Add IOMMU index argument to translate methodPeter Maydell
Add an IOMMU index argument to the translate method of IOMMUs. Since all of our current IOMMU implementations support only a single IOMMU index, this has no effect on the behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
2018-06-15iommu: Add IOMMU index argument to notifier APIsPeter Maydell
Add support for multiple IOMMU indexes to the IOMMU notifier APIs. When initializing a notifier with iommu_notifier_init(), the caller must pass the IOMMU index that it is interested in. When a change happens, the IOMMU implementation must pass memory_region_notify_iommu() the IOMMU index that has changed and that notifiers must be called for. IOMMUs which support only a single index don't need to change. Callers which only really support working with IOMMUs with a single index can use the result of passing MEMTXATTRS_UNSPECIFIED to memory_region_iommu_attrs_to_index(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-3-peter.maydell@linaro.org
2018-06-12Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180612-pull-request' ↵Peter Maydell
into staging usb: bug fix collection, doc update. # gpg: Signature made Tue 12 Jun 2018 11:44:17 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20180612-pull-request: usb-mtp: Return error on suspicious TYPE_DATA packet from initiator usb-hcd-xhci-test: add a test for ccid hotplug usb-ccid: fix bus leak object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence bus: do not unref the added child bus on realize usb/dev-mtp: Fix use of uninitialized values usb: correctly handle Zero Length Packets usb: update docs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc: fixes A couple of fixes to acpi and nvdimm. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 11 Jun 2018 20:21:03 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: nvdimm: make persistence option symbolic hw/i386: Update SSDT table used by "make check" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalenceMarc-André Lureau
A link property can be set during creation, with object_property_add_link() and later with object_property_set_link(). add_link() doesn't add a reference to the target object, while set_link() does. Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link, says whether a reference must be released when the property is destroyed. This can lead to leaks if the property was later set_link(), as the added reference is never released. Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG and use that has an indication on how the link handle reference management in set_link(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-11nvdimm: make persistence option symbolicRoss Zwisler
Replace the "nvdimm-cap" option which took numeric arguments such as "2" with a more user friendly "nvdimm-persistence" option which takes symbolic arguments "cpu" or "mem-ctrl". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-10pc: Remove PC_COMPAT_2_12 from 3.0 machine-typesEduardo Habkost
commit f548222c added PC_COMPAT_2_12 to the 3.0 PC machine-types. I believe this happened during manual conflict resolution when applying the patch. Cc: Xiao Guangrong <xiaoguangrong@tencent.com> Cc: Juan Quintela <quintela@redhat.com> Fixes: f548222c24342ca74689de7794f9006b43f86a54 Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20180608192940.19548-1-ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180604' ↵Peter Maydell
into staging migration/next for 20180604 # gpg: Signature made Mon 04 Jun 2018 05:14:24 BST # gpg: using RSA key F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20180604: migration: not wait RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect migration: remove unnecessary variables len in QIOChannelRDMA migration: Don't activate block devices if using -S migration: discard non-migratable RAMBlocks migration: introduce decompress-error-check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04migration: introduce decompress-error-checkXiao Guangrong
QEMU 3.0 enables strict check for compression & decompression to make the migration more robust, that depends on the source to fix the internal design which triggers the unexpected error conditions To make it work for migrating old version QEMU to 2.13 QEMU, we introduce this parameter to disable the error check on the destination which is the default behavior of the machine type which is older than 2.13, alternately, the strict check can be enabled explicitly as followings: -M pc-q35-2.11 -global migration.decompress-error-check=true Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01nvdimm, acpi: support NFIT platform capabilitiesRoss Zwisler
Add a machine command line option to allow the user to control the Platform Capabilities Structure in the virtualized NFIT. This Platform Capabilities Structure was added in ACPI 6.2 Errata A. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01memory: get rid of memory_region_init_reservationPaolo Bonzini
The function has been deprecated for 2.5 years, and there are just a handful of users. Convert them to memory_region_init_io with NULL callbacks, and while at it pass the right device as the owner. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i386/pc: Remove unused includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-20-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "sysemu/blockdev.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. Code change produced with: $ git grep '#include "sysemu/blockdev.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(BlockInterfaceType|DriveInfo|drive_get|blk_legacy_dinfo|blockdev_mark_auto_del)" | \ xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-15-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31xen-hvm: stop faking I/O to access PCI config spacePaul Durrant
This patch removes the current hackery where IOREQ_TYPE_PCI_CONFIG requests are handled by faking PIO to 0xcf8 and 0xcfc and replaces it with direct calls to pci_host_config_read/write_common(). Doing so necessitates mapping BDFs to PCIDevices but maintaining a simple QLIST in xen_device_realize/unrealize() will suffice. NOTE: whilst config space accesses are currently limited to PCI_CONFIG_SPACE_SIZE, this patch paves the way to increasing the limit to PCIE_CONFIG_SPACE_SIZE when Xen gains the ability to emulate MCFG table accesses. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-31xen-hvm: try to use xenforeignmemory_map_resource() to map ioreq pagesPaul Durrant
Xen 4.11 has a new API to directly map guest resources. Among the resources that can be mapped using this API are ioreq pages. This patch modifies QEMU to attempt to use the new API should it exist, falling back to the previous mechanism if it is unavailable. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-31xen/hvm: correct reporting of modified memory under physmap during migrationIgor Druzhinin
When global_log_dirty is enabled VRAM modification tracking never worked correctly. The address that is passed to xen_hvm_modified_memory() is not the effective PFN but RAM block address which is not the same for VRAM. We need to make a translation for this address into PFN using physmap. Since there is no way to access physmap properly inside xen_hvm_modified_memory() let's make it a global structure. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-29hw/i386: Rename 2.13 machine types to 3.0Peter Maydell
Rename the 2.13 machine types to match what we're going to use as our next release number. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20180522104000.9044-3-peter.maydell@linaro.org
2018-05-24Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, virtio, vhost: fixes, features Beginning of merging vDPA, new PCI ID, a new virtio balloon stat, intel iommu rework fixing a couple of security problems (no CVEs yet), fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 23 May 2018 15:41:32 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (28 commits) intel-iommu: rework the page walk logic util: implement simple iova tree intel-iommu: trace domain id during page walk intel-iommu: pass in address space when page walk intel-iommu: introduce vtd_page_walk_info intel-iommu: only do page walk for MAP notifiers intel-iommu: add iommu lock intel-iommu: remove IntelIOMMUNotifierNode intel-iommu: send PSI always even if across PDEs nvdimm: fix typo in label-size definition contrib/vhost-user-blk: enable protocol feature for vhost-user-blk hw/virtio: Fix brace Werror with clang 6.0.0 libvhost-user: Send messages with no data vhost-user+postcopy: Use qemu_set_nonblock virtio: support setting memory region based host notifier vhost-user: support receiving file descriptors in slave_read vhost-user: add Net prefix to internal state structure linux-headers: add kvm header for mips linux-headers: add unistd.h on all arches update-linux-headers.sh: unistd.h, kvm consistency ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-23intel-iommu: rework the page walk logicPeter Xu
This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23intel-iommu: trace domain id during page walkPeter Xu
This patch only modifies the trace points. Previously we were tracing page walk levels. They are redundant since we have page mask (size) already. Now we trace something much more useful which is the domain ID of the page walking. That can be very useful when we trace more than one devices on the same system, so that we can know which map is for which domain. CC: QEMU Stable <qemu-stable@nongnu.org> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23intel-iommu: pass in address space when page walkPeter Xu
We pass in the VTDAddressSpace too. It'll be used in the follow up patches. CC: QEMU Stable <qemu-stable@nongnu.org> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23intel-iommu: introduce vtd_page_walk_infoPeter Xu
During the recursive page walking of IOVA page tables, some stack variables are constant variables and never changed during the whole page walking procedure. Isolate them into a struct so that we don't need to pass those contants down the stack every time and multiple times. CC: QEMU Stable <qemu-stable@nongnu.org> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23intel-iommu: only do page walk for MAP notifiersPeter Xu
For UNMAP-only IOMMU notifiers, we don't need to walk the page tables. Fasten that procedure by skipping the page table walk. That should boost performance for UNMAP-only notifiers like vhost. CC: QEMU Stable <qemu-stable@nongnu.org> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23intel-iommu: add iommu lockPeter Xu
SECURITY IMPLICATION: this patch fixes a potential race when multiple threads access the IOMMU IOTLB cache. Add a per-iommu big lock to protect IOMMU status. Currently the only thing to be protected is the IOTLB/context cache, since that can be accessed even without BQL, e.g., in IO dataplane. Note that we don't need to protect device page tables since that's fully controlled by the guest kernel. However there is still possibility that malicious drivers will program the device to not obey the rule. In that case QEMU can't really do anything useful, instead the guest itself will be responsible for all uncertainties. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Fam Zheng <famz@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-13 19:36:10 +0000