aboutsummaryrefslogtreecommitdiff
path: root/hw/i386
AgeCommit message (Collapse)Author
2019-03-12intel_iommu: scalable mode emulationLiu, Yi L
Intel(R) VT-d 3.0 spec introduces scalable mode address translation to replace extended context mode. This patch extends current emulator to support Scalable Mode which includes root table, context table and new pasid table format change. Now intel_iommu emulates both legacy mode and scalable mode (with legacy-equivalent capability set). The key points are below: 1. Extend root table operations to support both legacy mode and scalable mode. 2. Extend context table operations to support both legacy mode and scalable mode. 3. Add pasid tabled operations to support scalable mode. Signed-off-by: Liu, Yi L <yi.l.liu@intel.com> [Yi Sun is co-developer to contribute much to refine the whole commit.] Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Message-Id: <1551753295-30167-2-git-send-email-yi.y.sun@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2019-03-12Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2019-03-11 * memfd fixes (Ilya Maximets) * Move nvdimms state into struct MachineState (Eric Auger) * hostmem-file: reject invalid pmem file sizes (Stefan Hajnoczi) # gpg: Signature made Tue 12 Mar 2019 00:57:41 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: memfd: improve error messages memfd: set up correct errno if not supported memfd: always check for MFD_CLOEXEC hostmem-memfd: disable for systems without sealing support machine: Move nvdimms state into struct MachineState nvdimm: Rename AcpiNVDIMMState into NVDIMMState hostmem-file: reject invalid pmem file sizes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-11pc: Support firmware configuration with -blockdevMarkus Armbruster
The PC machines put firmware in ROM by default. To get it put into flash memory (required by OVMF), you have to use -drive if=pflash,unit=0,... and optionally -drive if=pflash,unit=1,... Why two -drive? This permits setting up one part of the flash memory read-only, and the other part read/write. It also makes upgrading firmware on the host easier. Below the hood, it creates two separate flash devices, because we were too lazy to improve our flash device models to support sector protection. The problem at hand is to do the same with -blockdev somehow, as one more step towards deprecating -drive. Mapping -drive if=none,... to -blockdev is a solved problem. With if=T other than if=none, -drive additionally configures a block device frontend. For non-onboard devices, that part maps to -device. Also a solved problem. For onboard devices such as PC flash memory, we have an unsolved problem. This is actually an instance of a wider problem: our general device configuration interface doesn't cover onboard devices. Instead, we have a zoo of ad hoc interfaces that are much more limited. One of them is -drive, which we'd rather deprecate, but can't until we have suitable replacements for all its uses. Sadly, I can't attack the wider problem today. So back to the narrow problem. My first idea was to reduce it to its solved buddy by using pluggable instead of onboard devices for the flash memory. Workable, but it requires some extra smarts in firmware descriptors and libvirt. Paolo had an idea that is simpler for libvirt: keep the devices onboard, and add machine properties for their block backends. The implementation is less than straightforward, I'm afraid. First, block backend properties are *qdev* properties. Machines can't have those, as they're not devices. I could duplicate these qdev properties as QOM properties, but I hate that. More seriously, the properties do not belong to the machine, they belong to the onboard flash devices. Adding them to the machine would then require bad magic to somehow transfer them to the flash devices. Fortunately, QOM provides the means to handle exactly this case: add alias properties to the machine that forward to the onboard devices' properties. Properties need to be created in .instance_init() methods. For PC machines, that's pc_machine_initfn(). To make alias properties work, we need to create the onboard flash devices there, too. Requires several bug fixes, in the previous commits. We also have to realize the devices. More on that below. If the user sets pflash0, firmware resides in flash memory. pc_system_firmware_init() maps and realizes the flash devices. Else, firmware resides in ROM. The onboard flash devices aren't used then. pc_system_firmware_init() destroys them unrealized, along with the alias properties. The existing code to pick up drives defined with -drive if=pflash is replaced by code to desugar into the machine properties. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <87ftrtux81.fsf@dusky.pond.sub.org>
2019-03-11pc_sysfw: Pass PCMachineState to pc_system_firmware_init()Philippe Mathieu-Daudé
pc_system_firmware_init() parameter @isapc_ram_fw is PCMachineState member pci_enabled negated. The next commit will need more of PCMachineState. To prepare for that, pass a PCMachineState *, and drop the now redundant parameter @isapc_ram_fw. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190308131445.17502-11-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11pc_sysfw: Remove unused PcSysFwDevicePhilippe Mathieu-Daudé
This structure is not used since commit 6dd2a5c98a. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190308131445.17502-10-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 2Markus Armbruster
Our pflash devices are simplistically modelled has having "num-blocks" sectors of equal size "sector-length". Real hardware commonly has sectors of different sizes. How our "sector-length" property is related to the physical device's multiple sector sizes is unclear. Helper functions pflash_cfi01_register() and pflash_cfi02_register() create a pflash device, set properties including "sector-length" and "num-blocks", and realize. They take parameters @size, @sector_len and @nb_blocs. QOMification left parameter @size unused. Obviously, @size should match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs. All callers satisfy this. Remove @nb_blocs and compute it from @size and @sector_len. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-16-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 1Markus Armbruster
QOMification left parameter @qdev unused in pflash_cfi01_register() and pflash_cfi02_register(). All callers pass NULL. Remove. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-15-armbru@redhat.com>
2019-03-11pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02Markus Armbruster
flash.h's incomplete struct pflash_t is completed both in pflash_cfi01.c and in pflash_cfi02.c. The complete types are incompatible. This can hide type errors, such as passing a pflash_t created with pflash_cfi02_register() to pflash_cfi01_get_memory(). Furthermore, POSIX reserves typedef names ending with _t. Rename the two structs to PFlashCFI01 and PFlashCFI02. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-2-armbru@redhat.com>
2019-03-11update copyright noticeDavid Kiarie
Signed-off-by: David Kiarie <davidkiarie4@gmail.com> Message-Id: <20190304151827.1813-2-davidkiarie4@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11i386: extended the cpuid_level when Intel PT is enabledLuwei Kang
Intel Processor Trace required CPUID[0x14] but the cpuid_level have no change when create a kvm guest with e.g. "-cpu qemu64,+intel-pt". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Luwei Kang <luwei.kang@intel.com> Message-Id: <1548805979-12321-1-git-send-email-luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11hw/i386/pc: run the multiboot loader before the PVH loaderStefano Garzarella
Some multiboot images could be in the ELF format. In the current implementation QEMU fails because we try to load these images as a PVH image. In order to fix this issue, we should try multiboot first (we already check the multiboot magic header before to load it). If it is not a multiboot image, we can try the PVH loader. Fixes: ab969087da6 ("pvh: Boot uncompressed kernel using direct boot ABI", 2019-01-15) Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190214180216.246707-1-sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11machine: Move nvdimms state into struct MachineStateEric Auger
As NVDIMM support is looming for ARM and SPAPR, let's move the acpi_nvdimm_state to the generic machine struct instead of duplicating the same code in several machines. It is also renamed into nvdimms_state and becomes a pointer. nvdimm and nvdimm-persistence become generic machine options. They become guarded by a nvdimm_supported machine class member. We also add a description for those options. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190308182053.5487-3-eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11nvdimm: Rename AcpiNVDIMMState into NVDIMMStateEric Auger
As we intend to migrate the acpi_nvdimm_state into the base machine with a new dimms_state name, let's also rename the datatype. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308182053.5487-2-eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-07i386-softmmu.mak: remove all CONFIG_* except boards definitionsYang Zhong
%-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hyperv: express dependencies with kconfigYang Zhong
remove default-configs/hyperv.mak and make dependencies with Kconfig. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-41-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386: express dependencies with KconfigPaolo Bonzini
This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-06qdev: Let the hotplug_handler_unplug() caller delete the deviceDavid Hildenbrand
When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06hw/i386/pc.c: remove unused function pc_acpi_init()Wei Yang
Function pc_acpi_init() is not used anymore. Remove the definition and declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190214084939.20640-2-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-27boards.h: Ignore migration for SMBus devices on older machinesCorey Minyard
Migration capability is being added for pm_smbus and SMBus devices. This change will allow backwards compatibility to be kept when migrating back to an old qemu version. Add a bool to the machine class tho keep smbus migration from happening. Future changes will use this. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c: Split smbus into partsCorey Minyard
smbus.c and smbus.h had device side code, master side code, and smbus.h has some smbus_eeprom.c definitions. Split them into separate files. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-02-05i386, acpi: cleanup build_facs by removing second unused argumentWei Yang
The second argument of build_facs() is not used, just remove it. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-05acpi: Make TPM 2.0 with TIS available as MSFT0101Stefan Berger
This patch makes the a TPM 2.0 with TIS interface available under the HID 'MSF0101'. This is supported by Linux and also Windows now recognizes the TPM 2.0 with TIS interface. Leave the TPM 1.2 as before. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-02-05intel_iommu: reset intr_enabled when system resetPeter Xu
This is found when I was debugging another problem. Until now no bug is reported with this but we'd better reset the IR status correctly after a system reset. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-05intel_iommu: fix operator in vtd_switch_address_spacePeter Xu
When calculating use_iommu, we wanted to first detect whether DMAR is enabled, then check whether PT is enabled if DMAR is enabled. However in the current code we used "&" rather than "&&" so the ordering requirement is lost (instead it'll be an "AND" operation). This could introduce errors dumped in QEMU console when rebooting a guest with both assigned device and vIOMMU, like: qemu-system-x86_64: vtd_dev_to_context_entry: invalid root entry: rsvd=0xf000ff53f000e2c3, val=0xf000ff53f000ff53 (reserved nonzero) Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-05pc: Use hotplug_handler_(plug|unplug|unplug_request)David Hildenbrand
Let's avoid manually looking up the hotplug handler class. Use the existing wrappers instead. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181212095707.19358-1-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boardsPaolo Bonzini
CONFIG_PIIX and CONFIG_Q35 created for the pc board object files. These are enabled automatically at default-configs/i386-softmmu.mak and default-configs/x86_64-softmmu.mak Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-7-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05i386: allow to load initrd below 4 GB for recent linuxLi Zhijian
Since linux commit: cf8fa920cb42 ("i386: handle an initrd in highmem (version 2)") linux has supported initrd up to 4 GB, but the header field ramdisk_max is still set to 2 GB to avoid "possible bootloader bugs". When use '-kernel vmlinux -initrd initrd.cgz' to launch a VM, the firmware(it could be linuxboot_dma.bin) helps to read initrd contents into guest memory(below ramdisk_max) and jump to kernel. that's similar with what bootloader does, like grub. In addition, initrd_max is uint32_t simply because QEMU doesn't support the 64-bit boot protocol (specifically the ext_ramdisk_image field). Therefore here just limit initrd_max to UINT32_MAX simply as well to allow initrd to be loaded below 4 GB. NOTE: it's possible that linux protocol within [0x208, 0x20c] supports up to 4 GB initrd as well. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05i386: import & use bootparam.hLi Zhijian
it's from v4.20-rc5. CC: Stefano Garzarella <sgarzare@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/pc: enable PVH only for machine type >= 4.0Stefano Garzarella
In order to avoid migration issues, we enable PVH only for machine type >= 4.0 Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/pc: use PVH option romStefano Garzarella
Use pvh.bin option rom when we are booting an uncompressed kernel using the x86/HVM direct boot ABI. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05pvh: load initrd and expose it through fw_cfgStefano Garzarella
When initrd is specified, load and expose it to the guest firmware through fw_cfg. The firmware will fill the hvm_start_info for the kernel. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Based-on: <1545422632-24444-5-git-send-email-liam.merwick@oracle.com> Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05pvh: Boot uncompressed kernel using direct boot ABILiam Merwick
These changes (along with corresponding Linux kernel and qboot changes) enable a guest to be booted using the x86/HVM direct boot ABI. This commit adds a load_elfboot() routine to pass the size and location of the kernel entry point to qboot (which will fill in the start_info struct information needed to to boot the guest). Having loaded the ELF binary, load_linux() will run qboot which continues the boot. The address for the kernel entry point is read from an ELF Note in the uncompressed kernel binary by a helper routine passed to load_elf(). Co-developed-by: George Kennedy <George.Kennedy@oracle.com> Signed-off-by: George Kennedy <George.Kennedy@oracle.com> Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-31Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging - add device category (edu, i8042, sd memory card) - code clean-up - LGPL information clean-up - fix typo (acpi) # gpg: Signature made Wed 30 Jan 2019 13:21:50 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: virtio-blk: remove duplicate definition of VirtIOBlock *s pointer hw/block: clean up stale xen_disk trace entries target/m68k: Fix LGPL information in the file headers target/s390x: Fix LGPL version in the file header comments tcg: Fix LGPL version number target/tricore: Fix LGPL version number target/openrisc: Fix LGPL version number COPYING.LIB: Synchronize the LGPL 2.1 with the version from gnu.org Don't talk about the LGPL if the file is licensed under the GPL hw: sd: set category of the sd memory card hw: input: set category of the i8042 device typo: apci->acpi hw: edu: set category of the edu device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-30typo: apci->acpiDr. David Alan Gilbert
apci_1_compatible should be acpi_1_compatible. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190125094047.22276-1-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-28i386: Enable NPT and NRIPSAVE for AMD CPUsVitaly Kuznetsov
Modern AMD CPUs support NPT and NRIPSAVE features and KVM exposes these when present. NRIPSAVE apeared somewhere in Opteron_G3 lifetime (e.g. QuadCore AMD Opteron 2378 has is but QuadCore AMD Opteron HE 2344 doesn't), NPT was introduced a bit earlier. Add the FEAT_SVM leaf to Opteron_G4/G5 and EPYC/EPYC-IBPB cpu models. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20190121155051.5628-1-vkuznets@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-28i386: Update stepping of Cascadelake-ServerTao Xu
Update the stepping from 5 to 6, in order that the Cascadelake-Server CPU model can support AVX512VNNI and MSR based features exposed by ARCH_CAPABILITIES. Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20181227024304.12182-2-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-24hw/i386/pc.c: fix one typo in function nameWei Yang
Rename pc_get_hotpug_handler to pc_get_hotplug_handler. No functional change. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190124073626.20534-1-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-17acpi: build TPM Physical Presence interfaceStefan Berger
The TPM Physical Presence interface consists of an ACPI part, a shared memory part, and code in the firmware. Users can send messages to the firmware by writing a code into the shared memory through invoking the ACPI code. When a reboot happens, the firmware looks for the code and acts on it by sending sequences of commands to the TPM. This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't assume that SMIs are necessary to use. It uses a similar datastructure for the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use of it. I extended the shared memory data structure with an array of 256 bytes, one for each code that could be implemented. The array contains flags describing the individual codes. This decouples the ACPI implementation from the firmware implementation. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/ This patch implements version 1.30. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André - ACPI code improvements and windows fixes ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17acpi: expose TPM/PPI configuration parameters to firmware via fw_cfgStefan Berger
To avoid having to hard code the base address of the PPI virtual memory device we introduce a fw_cfg file etc/tpm/config that holds the base address of the PPI device, the version of the PPI interface and the version of the attached TPM. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André: renamed to etc/tpm/config, made it static, document it ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14hw/misc/ivshmem: Remove deprecated "ivshmem" legacy deviceThomas Huth
It's been marked as deprecated in QEMU v2.6.0 already, so really nobody should use the legacy "ivshmem" device anymore (but use ivshmem-plain or ivshmem-doorbell instead). Time to remove the deprecated device now. Belatedly also update a mention of the deprecated "ivshmem" in the file docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit 5400c02b90b ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem"). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' ↵Peter Maydell
into staging x86 queue, 2019-01-14 * Reenable RDTSCP support on Opteron_G[345] CPU models CPU models (Borislav Petkov) * host-phys-bits-limit option for better control of 5-level EPT (Eduardo Habkost) * Disable MPX support on named CPU models (Paolo Bonzini) * expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX as feature words (Vitaly Kuznetsov) # gpg: Signature made Mon 14 Jan 2019 14:33:55 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-next-pull-request: i386/kvm: add a comment explaining why .feat_names are commented out for Hyper-V feature bits x86: host-phys-bits-limit option target/i386: Disable MPX support on named CPU models target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU models i386/kvm: expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX as feature words Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-14target/i386: Disable MPX support on named CPU modelsPaolo Bonzini
MPX support is being phased out by Intel; GCC has dropped it, Linux is also going to do that. Even though KVM will have special code to support MPX after the kernel proper stops enabling it in XCR0, we probably also want to deprecate that in a few years. As a start, do not enable it by default for any named CPU model starting with the 4.0 machine types; this include Skylake, Icelake and Cascadelake. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181220121100.21554-1-pbonzini@redhat.com> Reviewed-by:   Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-14target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU modelsBorislav Petkov
The missing functionality was added ~3 years ago with the Linux commit 46896c73c1a4 ("KVM: svm: add support for RDTSCP") so reenable RDTSCP support on those CPU models. Opteron_G2 - being family 15, model 6, doesn't have RDTSCP support (the real hardware doesn't have it. K8 got RDTSCP support with the NPT models, i.e., models >= 0x40). Document the host's minimum required kernel version, while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Message-ID: <20181212200803.GG6653@zn.tnic> [ehabkost: moved compat properties code to pc.c] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-14xen: introduce new 'XenBus' and 'XenDevice' object hierarchyPaul Durrant
This patch adds the basic boilerplate for a 'XenBus' object that will act as a parent to 'XenDevice' PV backends. A new 'XenBridge' object is also added to connect XenBus to the system bus. The XenBus object is instantiated by a new xen_bus_init() function called from the same sites as the legacy xen_be_init() function. Subsequent patches will flesh-out the functionality of these objects. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 03:31:07 +0000