aboutsummaryrefslogtreecommitdiff
path: root/hw/i386/pc.c
AgeCommit message (Collapse)Author
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-10hw/i386/pc.c: Remove unused parallel_io and parallel_irq variablesPeter Maydell
The variables parallel_io and parallel_irq are unused; delete them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-13pc: port 92 reset requires a low->high transitionPaolo Bonzini
The PIIX datasheet says that "before another INIT pulse can be generated via [port 92h], [bit 0] must be written back to a zero. This bug is masked right now because a full reset will clear the value of port 92h. But once we implement soft reset correctly, the next attempt to enable the A20 line by setting bit 1 (and leaving the others untouched) will cause another reset. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05SMBIOS: Build aggregate smbios tables and entry pointGabriel L. Somlo
Build an aggregate set of smbios tables and an entry point structure. Insert tables and entry point into fw_cfg respectively under "etc/smbios/smbios-tables" and "etc/smbios/smbios-anchor". Machine types <= 2.0 will for now continue using field-by-field overrides to SeaBIOS defaults, but for machine types 2.1 and up we expect the BIOS to look for and use the aggregate tables generated by this patch. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> [ kraxel: fix 32bit build ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05SMBIOS: Rename symbols to better reflect future useGabriel L. Somlo
Rename the following symbols: - smbios_set_type1_defaults() to the more general smbios_set_defaults(); - bool smbios_type1_defaults to the more general smbios_defaults; - smbios_get_table() to smbios_get_table_legacy(); This patch contains no functional changes. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05E820: Add interface for accessing e820 tableGabriel L. Somlo
Add the following two functions: - e820_get_num_entries() - query the size of the e820 table - e820_get_entry() - grab an entry matching a given set of criteria This interface is currently necessary for creating type 19 (memory array mapped address) structures in smbios. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-18pc: Refuse max_cpus if it results in too large APIC IDEduardo Habkost
This changes the PC initialization code to reject max_cpus if it results in an APIC ID that's too large, instead of aborting or erroring out when it is already too late. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-18pc: Refuse CPU hotplug if the resulting APIC ID is too largeEduardo Habkost
The ACPI CPU hotplug code requires APIC IDs to be smaller than ACPI_CPU_HOTPLUG_ID_LIMIT, so enforce the limit before trying to hotplug a new vCPU, returning an error instead of crashing. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05pc.c: better error message on initrd sizing failureMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pc: Save size of RAM below 4GBEduardo Habkost
The ram_below_4g value will be useful in other places, such as the ACPI table code, and other code that currently requires passing below_4g_mem_size around in function arguments. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-10Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into stagingAnthony Liguori
QOM CPUState refactorings / X86CPU * TLB invalidation optimizations * X86CPU initialization cleanups * Preparations for X86CPU hot-unplug # gpg: Signature made Tue 24 Dec 2013 04:51:52 AM PST using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F * afaerber/tags/qom-cpu-for-anthony: target-i386: Cleanup 'foo=val' feature handling target-i386: Cleanup 'foo' feature handling target-i386: Convert 'check' and 'enforce' to static properties target-i386: Convert 'hv_spinlocks' to static property target-i386: Convert 'hv_vapic' to static property target-i386: Convert 'hv_relaxed' to static property cpu-exec: Optimize X86CPU usage in cpu_exec() target-i386: Move apic_state field from CPUX86State to X86CPU cputlb: Tidy memset() of arrays cputlb: Use memset() when flushing entries
2013-12-23target-i386: Move apic_state field from CPUX86State to X86CPUChen Fan
This motion is preparing for refactoring vCPU APIC subsequently. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23isa: Clean up use of cannot_instantiate_with_device_add_yetMarkus Armbruster
Drop it when there's no obvious reason why device_add could not work. Else keep and document why. * isa-fdc: drop * i8042: drop, even though its I/O base is hardcoded (because you could conceivably still add one to a board that has none), and even though PC board code wires up the A20 line (because that wiring is optional) * port92: keep because it needs additional wiring by port92_init() * mc146818rtc: keep because it needs to be wired up by rtc_init() * m48t59_isa: keep because needs to be wired up by m48t59_init_isa() * isa-pit, kvm-pit: keep (in their abstract base pic-common) because the PIT needs additional wiring by board code, depending on HPET presence * pcspk: keep because of pointer property pit, and because realize sets global pcspk_state * vmmouse: keep because of pointer property ps2_mouse * vmport: keep because realize sets global port_state * isa-i8259, kvm-i8259: keep (in their abstract base pic-common), because the PICs' IRQ input lines are set up by board code, and the wiring of the slave to the master is hard-coded in device model code Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23qdev: Replace no_user by cannot_instantiate_with_device_add_yetMarkus Armbruster
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash. To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dad. The device model is still omitted from help, but is available anyway. Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse. This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool. Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use. With that done, the regression fix is hopefully acceptable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-11pc: use macro for HPET typeMichael S. Tsirkin
avoid hard-coding strings Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11hpet: enable to entitle more irq pins for hpetLiu Ping Fan
Owning to some different hardware design, piix and q35 need different compat. So making them diverge. On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 can be assigned to hpet as guest chooses. So we introduce intcap property to do that. Consider the compat and piix/q35, we finally have the following value for intcap: For piix, hpet's intcap is hard coded as IRQ2. For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise IRQ2, IRQ8, and IRQ16~23 are allowed. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10pc: map PCI address space as catchall region for not mapped addressesMichael S. Tsirkin
With a help of negative memory region priority PCI address space is mapped underneath RAM regions effectively catching every access to addresses not mapped by any other region. It simplifies PCI address space mapping into system address space. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
2013-11-04pc: register e820 entries for ramGerd Hoffmann
So RAM shows up in the new etc/e820 fw_cfg file. Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-04pc: add etc/e820 fw_cfg fileGerd Hoffmann
Unlike the existing FW_CFG_E820_TABLE entry which carries reservations only the new etc/e820 file also has entries for RAM. Format is simliar to the FW_CFG_E820_TABLE, it is a simple list of e820_entry structs. Unlike FW_CFG_E820_TABLE it has no count though as the number of entries can be figured from the file size. Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-31Merge remote-tracking branch 'kraxel/e820.1' into stagingAnthony Liguori
* kraxel/e820.1: e820: pass high memory too. Message-id: 1382008179-5968-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-17e820: pass high memory too.Gerd Hoffmann
We have a fw_cfg entry to pass e820 entries from qemu to the firmware. Today it's used to pass reservations only. This patch makes qemu pass entries for RAM too. This allows to pass RAM sizes larger than 1TB to the firmware and it will also allow to pass non-contignous memory ramges should we decide to implement that some day, say for our virtual numa nodes. Obviously this needs some extra care to not break existing firware. SeaBIOS loads the entries and happily adds them without looking at the type. Which is problematic for memory below 4g as this will overwrite reservations added for bios memory etc. For memory above 4g it works just fine, seabios will merge the entry derived from cmos with the one loaded from fw_cfg. OVMF doesn't look at the fw_cfg e820 table. coreboot doesn't look at the fw_cfg e820 table. Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com>
2013-10-14i386: ACPI table generation code from seabiosMichael S. Tsirkin
This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pc: use new api to add builtin tablesMichael S. Tsirkin
At this point the only builtin table we have is the DSDT used for Q35. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14i386: define pc guest infoMichael S. Tsirkin
This defines a structure that will be used to fill in acpi tables where relevant properties are not yet available using QOM. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-03cpu: Use QTAILQ for CPU listAndreas Färber
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand macros. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-20Convert stderr message calling error_get_pretty() to error_report()Seiji Aguchi
Convert stderr messages calling error_get_pretty() to error_report(). Timestamp is prepended by -msg timstamp option with it. Per Markus's comment below, A conversion from fprintf() to error_report() is always an improvement, regardless of error_get_pretty(). http://marc.info/?l=qemu-devel&m=137513283408601&w=2 But, it is not reasonable to convert them at one time because fprintf() is used everwhere in qemu. So, it should be done step by step with avoiding regression. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-12pc_sysfw: do not make it a device anymorePaolo Bonzini
Move the code to hw/i386, the sole remaining property is available as !pci_enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com Rebased. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-06target-i386: Fix X86CPU error handlingAndreas Färber
Error **errp argument is not for emitting warnings, it means an error has occurred and the caller should not make any assumptions about the state of other return values (unless otherwise documented). Therefore cpu_x86_create() must unref the new X86CPU itself, and pc_new_cpu() must check for an Error rather than NULL return value. While at it, clean up a superfluous NULL check. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: qemu-stable@nongnu.org Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29pc: limit 64 bit hole to 2G by defaultIgor Mammedov
It turns out that some 32 bit windows guests crash if 64 bit PCI hole size is >2G. Limit it to 2G for piix and q35 by default. User may override default 64-bit PCI hole size by using "pci-hole64-size" property. Examples: -global i440FX-pcihost.pci-hole64-size=4G -global q35-pcihost.pci-hole64-size=4G Reported-by: Igor Mammedov <imammedo@redhat.com>, Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29pc: move IO_APIC_DEFAULT_ADDRESS to include/hw/i386/ioapic.hMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-id: 1375109277-25561-2-git-send-email-imammedo@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,net,pc enhancements This includes some fixes and enhancements that accumulated in my tree: pci fixes by dkoch, virtio-net enhancements by akong and mst, and a fix for xen pc by mst. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Don Koch (2) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pc: don't access fw cfg if NULL virtio-net: add feature bit for any header s/g net: add support of mac-programming over macvtap in QEMU side pci: fix BRDIGE typo pci-bridge: update mappings for migration/restore Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15pc: don't access fw cfg if NULLMichael S. Tsirkin
commit f8c457b88d72a48989f190bc3d7b79f4f3b7d11c "pc: pass PCI hole ranges to Guests" broke Xen as it has no fw_cfg. Check for this configuration and boil out. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Replace cpu_single_env with CPUState current_cpuAndreas Färber
Move it to qom/cpu.h. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-08Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,misc enhancements This includes some pci enhancements: Better support for systems with multiple PCI root buses FW cfg interface for more robust pci programming in BIOS Minor fixes/cleanups for fw cfg and cross-version migration - because of dependencies with other patches Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By David Gibson (10) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pci: Fold host_buses list into PCIHostState functionality pci: Remove domain from PCIHostBus pci: Simpler implementation of primary PCI bus pci: Add root bus parameter to pci_nic_init() pci: Add root bus argument to pci_get_bus_devfn() pci: Replace pci_find_domain() with more general pci_root_bus_path() pci: Use helper to find device's root bus in pci_find_domain() pci: Abolish pci_find_root_bus() pci: Move pci_read_devaddr to pci-hotplug-old.c pci: Cleanup configuration for pci-hotplug.c pvpanic: fix fwcfg for big endian hosts pvpanic: initialization cleanup MAINTAINERS: s/Marcelo/Paolo/ e1000: cleanup process_tx_desc pc_piix: cleanup init compat handling pc: pass PCI hole ranges to Guests pci: store PCI hole ranges in guestinfo structure range: add Range structure Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-07pci: Add root bus parameter to pci_nic_init()David Gibson
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will only create a NIC under the primary PCI root. As we add support for multiple PCI roots, that may no longer be the case. This patch adds a root bus parameter to pci_nic_init() (and updates callers accordingly) to allow the machine init code using it to specify the right PCI root for NICs created by old-style -net nic parameters. NICs created new-style, with -device can of course be put anywhere. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04hw/i*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04pc: pass PCI hole ranges to GuestsMichael S. Tsirkin
Guest currently has to jump through lots of hoops to guess the PCI hole ranges. It's fragile, and makes us change BIOS each time we add a new chipset. Let's report the window in a ROM file, to make BIOS do exactly what QEMU intends. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04pci: store PCI hole ranges in guestinfo structureMichael S. Tsirkin
Will be used to pass hole ranges to guests. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-28cpu: Change cpu_exit() argument to CPUStateAndreas Färber
It no longer depends on CPUArchState, so move it to qom/cpu.c. Prepares for changing GDBState::c_cpu to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-19pc: Make -no-fd-bootchk stick across boot order changesMarkus Armbruster
Option -no-fd-bootchk asks the BIOS to attempt booting from a floppy even when the boot sector signature isn't there, by setting a bit in RTC CMOS. It was added back in 2006 (commit 52ca8d6a). Two years later, commit 0ecdffbb added monitor command boot_set. Implemented by new function pc_boot_set(). It unconditionally clears the floppy signature bit in CMOS. Commit e0f084bf added -boot option once to automatically change the boot order on first reset. Reuses pc_boot_set(), thus also clears the floppy signature bit. Commit d9346e81 took care to preserve this behavior. Thus, -no-fd-bootchk applies to any number of boots. Except it applies just to the first boot with -boot once, and never after boot_set. Weird. Make it stick instead: set the bit according to -no-fd-bootchk in pc_boot_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1371208516-7857-6-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-15Merge branch 'realize-isa.v2' of git://github.com/afaerber/qemu-cpuBlue Swirl
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu: qdev: Drop FROM_QBUS() macro isa: QOM'ify ISADevice isa: QOM'ify ISABus i8259: Convert PICCommonState to use QOM realizefn kvm/i8259: QOM'ify some more i8259: QOM'ify some more i8254: Convert PITCommonState to QOM realizefn kvm/i8254: QOM'ify some more i8254: QOM'ify some more isa: Use realizefn for ISADevice cs4231a: QOM'ify some more gus: QOM'ify some more
2013-06-10pc: Fix crash when attempting to hotplug CPU with negative IDIgor Mammedov
QMP command "{ 'execute': 'cpu-add', 'arguments': { 'id': -1 }}" may cause QEMU SIGSEGV at: piix4_cpu_hotplug_req () ... g->sts[cpu_id / 8] |= (1 << (cpu_id % 8)); ... Since for PC in current implementation id should be in range [0...maxcpus) and maxcpus is already checked, add check for lower bound and error out on incorrect value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-07isa: QOM'ify ISADeviceAndreas Färber
Rename its parent field and use DEVICE() where necessary. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-07isa: Use realizefn for ISADeviceAndreas Färber
Drop ISADeviceClass::init and the resulting no-op initfn and let children implement their own realizefn. Adapt error handling. Split off an instance_init where sensible. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-02refer to FWCfgState explicitlyLaszlo Ersek
Currently some places use pointer-to-void even though they mean pointer-to-FWCfgState. Clean them up. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-01pc: Implement QEMUMachine::hot_add_cpu hookIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Move APIC to ICC busIgor Mammedov
It allows APIC to be hotplugged. * map APIC's mmio at board level if it is present * do not register mmio region for each APIC, since only one is used/mapped Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01target-i386: Attach ICC bus to CPU on its creationIgor Mammedov
X86CPU should have parent bus so it could provide bus for child APIC. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-24 22:34:08 +0000