aboutsummaryrefslogtreecommitdiff
path: root/hw/i386/pc.c
AgeCommit message (Collapse)Author
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-15hw/i386: turn off vmport if CONFIG_VMPORT is disabledJulio Montes
vmport device is not included when CONFIG_VMPORT is disabled, hence QEMU fails with the following error: `Unknown device 'vmport' for bus 'ISA': unknown.` v2: imply VMPORT (Paolo Bonzini ) Signed-off-by: Julio Montes <julio.montes@intel.com> Message-Id: <20190712160257.18270-1-julio.montes@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05i386: Make unversioned CPU models be aliasesEduardo Habkost
This will make unversioned CPU models behavior depend on the machine type: * "pc-*-4.0" and older will not report them as aliases. This is done to keep compatibility with older QEMU versions after management software starts translating aliases. * "pc-*-4.1" will translate unversioned CPU models to -v1. This is done to keep compatibility with existing management software, that still relies on CPU model runnability promises. * "none" will translate unversioned CPU models to their latest version. This is planned become the default in future machine types (probably in pc-*-4.3). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190628002844.24894-8-ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05vl.c: Add -smp, dies=* command line support and update docLike Xu
For PC target, users could configure the number of dies per one package via command line with this patch, such as "-smp dies=2,cores=4". The parsing rules of new cpu-topology model obey the same restrictions/logic as the legacy socket/core/thread model especially on missing values computing. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190620054525.37188-4-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05machine: Refactor smp_parse() in vl.c as MachineClass::smp_parse()Like Xu
To make smp_parse() more flexible and expansive, a smp_parse function pointer is added to MachineClass that machine types could override. The generic smp_parse() code in vl.c is moved to hw/core/machine.c, and become the default implementation of MachineClass::smp_parse. A PC-specific function called pc_smp_parse() has been added to hw/i386/pc.c, which in this patch changes nothing against the default one . Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190620054525.37188-3-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05machine: show if CLI option '-numa node,mem' is supported in QAPI schemaIgor Mammedov
Legacy '-numa node,mem' option has a number of issues and mgmt often defaults to it. Unfortunately it's no possible to replace it with an alternative '-numa memdev' without breaking migration compatibility. What's possible though is to deprecate it, keeping option working with old machine types only. In order to help users to find out if being deprecated CLI option '-numa node,mem' is still supported by particular machine type, add new "numa-mem-supported" property to output of query-machines. "numa-mem-supported" is set to 'true' for machines that currently support NUMA, but it will be flipped to 'false' later on, once deprecation period expires and kept 'true' only for old machine types that used to support the legacy option so it won't break existing configuration that are using it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1560172207-378962-1-git-send-email-imammedo@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05pc: fix possible NULL pointer dereference in ↵Igor Mammedov
pc_machine_get_device_memory_region_size() QEMU will crash when device-memory-region-size property is read if ms->device_memory wasn't initialized yet. Crash can be reproduced with: $QEMU -preconfig -qmp unix:qmp_socket,server,nowait & ./scripts/qmp/qom-get -s qmp_socket /machine.device-memory-region-size Instead of crashing return 0 if ms->device_memory hasn't been initialized. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190624090200.5383-1-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05i386: Update new x86_apicid parsing rules with die_offset supportLike Xu
In new sockets/dies/cores/threads model, the apicid of logical cpu could imply die level info of guest cpu topology thus x86_apicid_from_cpu_idx() need to be refactored with #dies value, so does apicid_*_offset(). To keep semantic compatibility, the legacy pkg_offset which helps to generate CPUIDs such as 0x3 for L3 cache should be mapping to die_offset. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190612084104.34984-5-like.xu@linux.intel.com> [ehabkost: squash unit test patch] Message-Id: <20190612084104.34984-6-like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05i386/cpu: Consolidate die-id validity in smp contextLike Xu
The field die_id (default as 0) and has_die_id are introduced to X86CPU. Following the legacy smp check rules, the die_id validity is added to the same contexts as leagcy smp variables such as hmp_hotpluggable_cpus(), machine_set_cpu_numa_node(), cpu_slot_to_string() and pc_cpu_pre_plug(). Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190612084104.34984-4-like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05hw/i386: Adjust nr_dies with configured smp_dies for PCMachineLike Xu
To support multiple dies configuration on PCMachine, the best place to set CPUX86State->nr_dies with requested PCMachineState->smp_dies is in pc_new_cpu() and pc_cpu_pre_plug(). Refactoring pc_new_cpu() is applied and redundant parameter "const char *typename" would be removed. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190612084104.34984-3-like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05i386: Add die-level cpu topology to x86CPU on PCMachineLike Xu
The die-level as the first PC-specific cpu topology is added to the leagcy cpu topology model, which has one die per package implicitly and only the numbers of sockets/cores/threads are configurable. In the new model with die-level support, the total number of logical processors (including offline) on board will be calculated as: #cpus = #sockets * #dies * #cores * #threads and considering compatibility, the default value for #dies would be initialized to one in x86_cpu_initfn() and pc_machine_initfn(). Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190612084104.34984-2-like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05hw/i386: Replace global smp variables with machine smp propertiesLike Xu
The global smp variables in i386 are replaced with smp machine properties. To avoid calling qdev_get_machine() as much as possible, some related funtions for acpi data generations are refactored. No semantic changes. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-8-like.xu@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05machine: Refactor smp-related call chains to pass MachineStateLike Xu
To get rid of the global smp_* variables we're currently using, it's recommended to pass MachineState in the list of incoming parameters for functions that use global smp variables, thus some redundant parameters are dropped. It's applied for legacy smbios_*(), *_machine_reset(), hot_add_cpu() and mips *_create_cpu(). Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-3-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-04pc: Move compat_apic_id_mode variable to PCMachineClassEduardo Habkost
Replace the static variable with a PCMachineClass field. This will help us eventually get rid of the pc_compat_*() init functions. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190628200227.1053-1-ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04pc: Support for virtio-pmem-pciDavid Hildenbrand
Override the device hotplug handler to properly handle the memory device part via virtio-pmem-pci callbacks from the machine hotplug handler and forward to the actual PCI bus hotplug handler. As PCI hotplug has not been properly factored out into hotplug handlers, most magic is performed in the (un)realize functions. Also some PCI host buses don't have a PCI hotplug handler at all yet, just to be sure that we alway have a hotplug handler on x86, add a simple error check. Unlocking virtio-pmem will unlock virtio-pmem-pci. Signed-off-by: David Hildenbrand <david@redhat.com> [ Disable virtio-pmem hotunplug ] Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Message-Id: <20190619094907.10131-8-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-21hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1Greg Kurz
Commit c87759ce876a fixed a regression affecting pc-q35 machines by introducing a new pc-q35-4.0.1 machine version to be used instead of pc-q35-4.0. The only purpose was to revert the default behaviour of not using split irqchip, but the change also introduced the usual hw_compat and pc_compat bits, and wired them for pc-q35 only. This raises questions when it comes to add new compat properties for 4.0* machine versions of any architecture. Where to add them ? In 4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach all other architectures about 4.0.1. This solution isn't satisfying, especially since this is a pc-q35 specific issue. It turns out that the split irqchip default is handled in the machine option function and doesn't involve compat lists at all. Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1 machine option function. Move the compat props that were added to the 4.0.1 since c87759ce876a to 4.0. Even if only hw_compat_4_0_1 had an impact on other architectures, drop pc_compat_4_0_1 as well for consistency. Fixes: c87759ce876a "q35: Revert to kernel irqchip" Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <156051774276.244890.8660277280145466396.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21i386/kvm: convert hyperv enlightenments properties from bools to bitsVitaly Kuznetsov
Representing Hyper-V properties as bits will allow us to check features and dependencies between them in a natural way. Suggested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20190517141924.19024-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-11qemu-common: Move tcg_enabled() etc. to sysemu/tcg.hMarkus Armbruster
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h, sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in qemu-common.h. This necessitates inclusion of qemu-common.h into headers, which is against the rules spelled out in qemu-common.h's file comment. Move tcg_enabled() & friends into their own header sysemu/tcg.h, and adjust #include directives. Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Rebased with conflicts resolved automatically, except for accel/tcg/tcg-all.c]
2019-06-10target/i386: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace x86_env_get_cpu with env_archcpu. The combination CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-03q35: Revert to kernel irqchipAlex Williamson
Commit b2fc91db8447 ("q35: set split kernel irqchip as default") changed the default for the pc-q35-4.0 machine type to use split irqchip, which turned out to have disasterous effects on vfio-pci INTx support. KVM resampling irqfds are registered for handling these interrupts, but these are non-functional in split irqchip mode. We can't simply test for split irqchip in QEMU as userspace handling of this interrupt is a significant performance regression versus KVM handling (GeForce GPUs assigned to Windows VMs are non-functional without forcing MSI mode or re-enabling kernel irqchip). The resolution is to revert the change in default irqchip mode in the pc-q35-4.1 machine and create a pc-q35-4.0.1 machine for the 4.0-stable branch. The qemu-q35-4.0 machine type should not be used in vfio-pci configurations for devices requiring legacy INTx support without explicitly modifying the VM configuration to use kernel irqchip. Link: https://bugs.launchpad.net/qemu/+bug/1826422 Fixes: b2fc91db8447 ("q35: set split kernel irqchip as default") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <155786484688.13873.6037015630912983760.stgit@gimli.home> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-23hw/i386: Extract fw_cfg definitions to local "fw_cfg.h"Philippe Mathieu-Daudé
Extract the architecture-specific fw_cfg definitions to "fw_cfg.h". Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190422195020.1494-4-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-04-25hw: add compat machines for 4.1Cornelia Huck
Add 4.1 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190411102025.22559-1-cohuck@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-09hw/i386/pc: Fix crash when hot-plugging nvdimm on older machine typesThomas Huth
QEMU currently crashes when you try to hot-plug an "nvdimm" device on older machine types: $ qemu-system-x86_64 -monitor stdio -M pc-1.1 QEMU 3.1.92 monitor - type 'help' for more information (qemu) device_add nvdimm,id=nvdimmn1 qemu-system-x86_64: /home/thuth/devel/qemu/util/error.c:57: error_setv: Assertion `*errp == ((void *)0)' failed. Aborted (core dumped) The call to hotplug_handler_pre_plug() in pc_memory_pre_plug() has been added recently before the check whether nvdimm is enabled. It should be done after the check. And while we're at it, also check the errp after the hotplug_handler_pre_plug(), otherwise errors are silently ignored here. Fixes: 9040e6dfa8c3fed87695a3de555d2c775727bb51 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190407092314.11066-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12i386, acpi: check acpi_memory_hotplug capacity in pre_plugWei Yang
Currently we do device realization like below: hotplug_handler_pre_plug() dc->realize() hotplug_handler_plug() Before we do device realization and plug, we should allocate necessary resources and check if memory-hotplug-support property is enabled. At the piix4 and ich9, the memory-hotplug-support property is checked at plug stage. This means that device has been realized and mapped into guest address space 'pc_dimm_plug()' by the time acpi plug handler is called, where it might fail and crash QEMU due to reaching g_assert_not_reached() (piix4) or error_abort (ich9). Fix it by checking if memory hotplug is enabled at pre_plug stage where we can gracefully abort hotplug request. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> CC: Igor Mammedov <imammedo@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190301033548.6691-1-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2019-03-11 * memfd fixes (Ilya Maximets) * Move nvdimms state into struct MachineState (Eric Auger) * hostmem-file: reject invalid pmem file sizes (Stefan Hajnoczi) # gpg: Signature made Tue 12 Mar 2019 00:57:41 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: memfd: improve error messages memfd: set up correct errno if not supported memfd: always check for MFD_CLOEXEC hostmem-memfd: disable for systems without sealing support machine: Move nvdimms state into struct MachineState nvdimm: Rename AcpiNVDIMMState into NVDIMMState hostmem-file: reject invalid pmem file sizes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-11pc: Support firmware configuration with -blockdevMarkus Armbruster
The PC machines put firmware in ROM by default. To get it put into flash memory (required by OVMF), you have to use -drive if=pflash,unit=0,... and optionally -drive if=pflash,unit=1,... Why two -drive? This permits setting up one part of the flash memory read-only, and the other part read/write. It also makes upgrading firmware on the host easier. Below the hood, it creates two separate flash devices, because we were too lazy to improve our flash device models to support sector protection. The problem at hand is to do the same with -blockdev somehow, as one more step towards deprecating -drive. Mapping -drive if=none,... to -blockdev is a solved problem. With if=T other than if=none, -drive additionally configures a block device frontend. For non-onboard devices, that part maps to -device. Also a solved problem. For onboard devices such as PC flash memory, we have an unsolved problem. This is actually an instance of a wider problem: our general device configuration interface doesn't cover onboard devices. Instead, we have a zoo of ad hoc interfaces that are much more limited. One of them is -drive, which we'd rather deprecate, but can't until we have suitable replacements for all its uses. Sadly, I can't attack the wider problem today. So back to the narrow problem. My first idea was to reduce it to its solved buddy by using pluggable instead of onboard devices for the flash memory. Workable, but it requires some extra smarts in firmware descriptors and libvirt. Paolo had an idea that is simpler for libvirt: keep the devices onboard, and add machine properties for their block backends. The implementation is less than straightforward, I'm afraid. First, block backend properties are *qdev* properties. Machines can't have those, as they're not devices. I could duplicate these qdev properties as QOM properties, but I hate that. More seriously, the properties do not belong to the machine, they belong to the onboard flash devices. Adding them to the machine would then require bad magic to somehow transfer them to the flash devices. Fortunately, QOM provides the means to handle exactly this case: add alias properties to the machine that forward to the onboard devices' properties. Properties need to be created in .instance_init() methods. For PC machines, that's pc_machine_initfn(). To make alias properties work, we need to create the onboard flash devices there, too. Requires several bug fixes, in the previous commits. We also have to realize the devices. More on that below. If the user sets pflash0, firmware resides in flash memory. pc_system_firmware_init() maps and realizes the flash devices. Else, firmware resides in ROM. The onboard flash devices aren't used then. pc_system_firmware_init() destroys them unrealized, along with the alias properties. The existing code to pick up drives defined with -drive if=pflash is replaced by code to desugar into the machine properties. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <87ftrtux81.fsf@dusky.pond.sub.org>
2019-03-11pc_sysfw: Pass PCMachineState to pc_system_firmware_init()Philippe Mathieu-Daudé
pc_system_firmware_init() parameter @isapc_ram_fw is PCMachineState member pci_enabled negated. The next commit will need more of PCMachineState. To prepare for that, pass a PCMachineState *, and drop the now redundant parameter @isapc_ram_fw. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190308131445.17502-11-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11i386: extended the cpuid_level when Intel PT is enabledLuwei Kang
Intel Processor Trace required CPUID[0x14] but the cpuid_level have no change when create a kvm guest with e.g. "-cpu qemu64,+intel-pt". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Luwei Kang <luwei.kang@intel.com> Message-Id: <1548805979-12321-1-git-send-email-luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11hw/i386/pc: run the multiboot loader before the PVH loaderStefano Garzarella
Some multiboot images could be in the ELF format. In the current implementation QEMU fails because we try to load these images as a PVH image. In order to fix this issue, we should try multiboot first (we already check the multiboot magic header before to load it). If it is not a multiboot image, we can try the PVH loader. Fixes: ab969087da6 ("pvh: Boot uncompressed kernel using direct boot ABI", 2019-01-15) Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190214180216.246707-1-sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-11machine: Move nvdimms state into struct MachineStateEric Auger
As NVDIMM support is looming for ARM and SPAPR, let's move the acpi_nvdimm_state to the generic machine struct instead of duplicating the same code in several machines. It is also renamed into nvdimms_state and becomes a pointer. nvdimm and nvdimm-persistence become generic machine options. They become guarded by a nvdimm_supported machine class member. We also add a description for those options. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190308182053.5487-3-eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11nvdimm: Rename AcpiNVDIMMState into NVDIMMStateEric Auger
As we intend to migrate the acpi_nvdimm_state into the base machine with a new dimms_state name, let's also rename the datatype. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308182053.5487-2-eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06qdev: Let the hotplug_handler_unplug() caller delete the deviceDavid Hildenbrand
When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06hw/i386/pc.c: remove unused function pc_acpi_init()Wei Yang
Function pc_acpi_init() is not used anymore. Remove the definition and declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190214084939.20640-2-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-05pc: Use hotplug_handler_(plug|unplug|unplug_request)David Hildenbrand
Let's avoid manually looking up the hotplug handler class. Use the existing wrappers instead. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181212095707.19358-1-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05i386: allow to load initrd below 4 GB for recent linuxLi Zhijian
Since linux commit: cf8fa920cb42 ("i386: handle an initrd in highmem (version 2)") linux has supported initrd up to 4 GB, but the header field ramdisk_max is still set to 2 GB to avoid "possible bootloader bugs". When use '-kernel vmlinux -initrd initrd.cgz' to launch a VM, the firmware(it could be linuxboot_dma.bin) helps to read initrd contents into guest memory(below ramdisk_max) and jump to kernel. that's similar with what bootloader does, like grub. In addition, initrd_max is uint32_t simply because QEMU doesn't support the 64-bit boot protocol (specifically the ext_ramdisk_image field). Therefore here just limit initrd_max to UINT32_MAX simply as well to allow initrd to be loaded below 4 GB. NOTE: it's possible that linux protocol within [0x208, 0x20c] supports up to 4 GB initrd as well. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05i386: import & use bootparam.hLi Zhijian
it's from v4.20-rc5. CC: Stefano Garzarella <sgarzare@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/pc: enable PVH only for machine type >= 4.0Stefano Garzarella
In order to avoid migration issues, we enable PVH only for machine type >= 4.0 Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/pc: use PVH option romStefano Garzarella
Use pvh.bin option rom when we are booting an uncompressed kernel using the x86/HVM direct boot ABI. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05pvh: load initrd and expose it through fw_cfgStefano Garzarella
When initrd is specified, load and expose it to the guest firmware through fw_cfg. The firmware will fill the hvm_start_info for the kernel. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Based-on: <1545422632-24444-5-git-send-email-liam.merwick@oracle.com> Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05pvh: Boot uncompressed kernel using direct boot ABILiam Merwick
These changes (along with corresponding Linux kernel and qboot changes) enable a guest to be booted using the x86/HVM direct boot ABI. This commit adds a load_elfboot() routine to pass the size and location of the kernel entry point to qboot (which will fill in the start_info struct information needed to to boot the guest). Having loaded the ELF binary, load_linux() will run qboot which continues the boot. The address for the kernel entry point is read from an ELF Note in the uncompressed kernel binary by a helper routine passed to load_elf(). Co-developed-by: George Kennedy <George.Kennedy@oracle.com> Signed-off-by: George Kennedy <George.Kennedy@oracle.com> Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-28i386: Enable NPT and NRIPSAVE for AMD CPUsVitaly Kuznetsov
Modern AMD CPUs support NPT and NRIPSAVE features and KVM exposes these when present. NRIPSAVE apeared somewhere in Opteron_G3 lifetime (e.g. QuadCore AMD Opteron 2378 has is but QuadCore AMD Opteron HE 2344 doesn't), NPT was introduced a bit earlier. Add the FEAT_SVM leaf to Opteron_G4/G5 and EPYC/EPYC-IBPB cpu models. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20190121155051.5628-1-vkuznets@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-28i386: Update stepping of Cascadelake-ServerTao Xu
Update the stepping from 5 to 6, in order that the Cascadelake-Server CPU model can support AVX512VNNI and MSR based features exposed by ARCH_CAPABILITIES. Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20181227024304.12182-2-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-24hw/i386/pc.c: fix one typo in function nameWei Yang
Rename pc_get_hotpug_handler to pc_get_hotplug_handler. No functional change. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190124073626.20534-1-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-14target/i386: Disable MPX support on named CPU modelsPaolo Bonzini
MPX support is being phased out by Intel; GCC has dropped it, Linux is also going to do that. Even though KVM will have special code to support MPX after the kernel proper stops enabling it in XCR0, we probably also want to deprecate that in a few years. As a start, do not enable it by default for any named CPU model starting with the 4.0 machine types; this include Skylake, Icelake and Cascadelake. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181220121100.21554-1-pbonzini@redhat.com> Reviewed-by:   Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-14target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU modelsBorislav Petkov
The missing functionality was added ~3 years ago with the Linux commit 46896c73c1a4 ("KVM: svm: add support for RDTSCP") so reenable RDTSCP support on those CPU models. Opteron_G2 - being family 15, model 6, doesn't have RDTSCP support (the real hardware doesn't have it. K8 got RDTSCP support with the NPT models, i.e., models >= 0x40). Document the host's minimum required kernel version, while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Message-ID: <20181212200803.GG6653@zn.tnic> [ehabkost: moved compat properties code to pc.c] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-11Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2019-01-10 * Simplify GlobalProperty array declarations (Eduardo Habkost) * Deprecate cpu-add commands (Kashyap Chamarthy) * range/memory-device cleanups (David Hildenbrand) * Fix -device scsi-hd,help regression (Marc-André Lureau) * Fix crash when -global generates multiple warnings (Eduardo Habkost) # gpg: Signature made Thu 10 Jan 2019 14:28:23 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: qom: Don't keep error value between object_property_parse() calls qdev: fix -device scsi-hd,help regression machine: Use shorter format for GlobalProperty arrays machine: Eliminate unnecessary stringify() usage spapr: Eliminate SPAPR_PCI_2_7_MMIO_WIN_SIZE macro memory-device: rewrite address assignment using ranges range: add some more functions Mention that QMP 'cpu-add' will be deprecated Update that HMP 'cpu-add' is deprecated in 4.0 qemu-deprecated.texi: Rename the HMP section Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-09machine: Use shorter format for GlobalProperty arraysEduardo Habkost
Instead of verbose arrays with 4 lines for each entry, make each entry take only one line. This makes long arrays that couldn't fit in the screen become short and readable. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190107193020.21744-4-ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-09machine: Eliminate unnecessary stringify() usageEduardo Habkost
stringify() is useful when we need to use macros in compat_props (like when we set virtio-baloon-pci.class=PCI_CLASS_MEMORY_RAM at pc_i440fx_1_0_machine_options()), but it is pointless when we are already providing a number literal. Replace stringify() with string literals when appropriate. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190107193020.21744-3-ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-09ioapic: use TYPE_FOO MACRO than constant stringLi Qiang
Make them more QOMConventional. Cc:qemu-trivial@nongnu.org Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20190105023831.66910-1-liq3ea@163.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-12 16:17:19 +0000