aboutsummaryrefslogtreecommitdiff
path: root/hw/i386/acpi-build.c
AgeCommit message (Collapse)Author
2016-09-24hw/i386: AMD IOMMU IVRS tableDavid Kiarie
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR depending on emulated IOMMU. Signed-off-by: David Kiarie <davidkiarie4@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-08acpi-build: fix array leakMarc-André Lureau
The free_ranges array is used as a temporary pointer array, the segment should still be freed, however, it shouldn't free the elements themself. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-07-29hw/apci: handle 64-bit MMIO regions correctlyMarcel Apfelbaum
In build_crs(), the calculation and merging of the ranges already happens in 64-bit, but the entry boundaries are silently truncated to 32-bit in the call to aml_dword_memory(). Fix it by handling the 64-bit MMIO ranges separately. This fixes 64-bit BARs behind PXBs. Reported-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29acpi: refactor pxb crs computationMarcel Apfelbaum
Instead of always passing both IO and MEM ranges when computing CRS ranges, define a new CrsRangeSet structure that include them both. This is done before introducing a third type of range, 64-bit MEM, so it will be easier to pass them all around. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29hw/acpi: fix a DSDT table issue when a pxb is present.Marcel Apfelbaum
PXBs do not support hotplug so they don't have a PCNT function. Since the PXB's PCI root-bus is a child bus of bus 0, the build_dsdt code will add a call to the corresponding PCNT function. Fix this by skipping the PCNT call for the above case. While at it skip also PCIe child buses. Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20acpi: add DMAR scope definition for root IOAPICPeter Xu
To enable interrupt remapping for intel IOMMU device, each IOAPIC device in the system reported via ACPI MADT must be explicitly enumerated under one specific remapping hardware unit. This patch adds the root-complex IOAPIC into the default DMAR device. Please refer to VT-d spec 8.3.1.1 for more information. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20acpi: enable INTR for DMAR report structurePeter Xu
In ACPI DMA remapping report structure, enable INTR flag when specified. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20x86-iommu: provide x86_iommu_get_defaultPeter Xu
Instead of searching the device tree every time, one static variable is declared for the default system x86 IOMMU device. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04range: Eliminate direct Range member accessMarkus Armbruster
Users of struct Range mess liberally with its members, which makes refactoring hard. Create a set of methods, and convert all users to call them instead of accessing members. The methods have carefully worded contracts, and use assertions to check them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04pc: Eliminate PcPciInfoMarkus Armbruster
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and w64 is the PCI64 hole. Three users: * I440FXState and MCHPCIState have a member PcPciInfo pci_info, but only pci_info.w32 is actually used. This is confusing. Replace by Range pci_hole. * acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes from acpi_get_pci_info() to build_dsdt(). Replace by two variables Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to acpi_get_pci_holes(). PcPciInfo is now unused; drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-24pc: acpi: drop intermediate PCMachineState.node_cpuIgor Mammedov
PCMachineState.node_cpu was used for mapping APIC ID to numa node id as CPU entries in SRAT used to be built on sparse APIC ID bitmap (up to apic_id_limit). However since commit 5803fce pc: acpi: SRAT: create only valid processor lapic entries CPU entries in SRAT aren't build using apic bitmap but using 0..maxcpus index instead which is also used for creating numa_info[x].node_cpu map. So instead of doing useless intermediate conversion from 1. node by cpu index -> node by apic id i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu 2. apic id -> srat entry PMX PCMachineState.node_cpu[apic id] -> PMX value use numa_info[x].node_cpu map directly like ARM does and do 1. numa_info[x].node_cpu -> PMX value using index in range 0..maxcpus and drop not necessary PCMachineState.node_cpu and related code. That also removes the last (not counting legacy hotplug) dependency of ACPI code on apic_id_limit and need to allocate huge sparse PCMachineState.node_cpu array in case of 32-bit APIC IDs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: use new CPU hotplug interface since 2.7 machine typeIgor Mammedov
For compatibility reasons PC/Q35 will start with legacy CPU hotplug interface by default but with new CPU hotplug AML code since 2.7 machine type. That way legacy firmware that doesn't use QEMU generated ACPI tables will be able to continue using legacy CPU hotplug interface. While new machine type, with firmware supporting QEMU provided ACPI tables, will generate new CPU hotplug AML, which will switch to new CPU hotplug interface when guest OS executes its _INI method on ACPI tables loading. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: Add IPMI table entriesCorey Minyard
Use the ACPI table construction tools to create an ACPI entry for IPMI. This adds a function called build_acpi_ipmi_devices to add an DSDT entry for IPMI if IPMI is compiled in and an IPMI device exists. It also adds a dummy function if IPMI is not compiled in. This conforms to section "C3-2 Locating IPMI System Interfaces in ACPI Name Space" in the IPMI 2.0 specification. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07all: Remove unnecessary glib.h includesPeter Maydell
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07acpi: make bios_linker_loader_add_checksum() API offset basedIgor Mammedov
It should help to make clear that bios_linker works in terms of offsets within a file. Also it should prevent mistakes where user passes as arguments pointers to unrelated to file blobs. While at it, considering that it's a ACPI checksum and it's initial value must be 0, move checksum field zeroing into bios_linker_loader_add_checksum() instead of doing it at every call site manually before bios_linker_loader_add_checksum() is called. In addition add extra boundary checks. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07acpi: make bios_linker_loader_add_pointer() API offset basedIgor Mammedov
cleanup bios_linker_loader_add_pointer() API by switching arguments to taking offsets relative to corresponding files instead of doing pointer arithmetic on behalf of user which were confusing. Also make offset inside of source file explicit in API so that user won't have to manually set it in destination file blob and while at it add additional boundary checks. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07tpm: apci: cleanup TCPA table initializationIgor Mammedov
At the time build_tpm_tcpa() is called the tcpalog size is always 0, so log_area_start_address which is actually offset from the start of ACPI_BUILD_TPMLOG_FILE is always 0. Also as 'TCPA' is allocated 0 filled, there is no point in calculating always 0 log_area_start_address and set tcpa->log_area_start_address to it since the field should always point to start of ACPI_BUILD_TPMLOG_FILE. Make code easier to read dropping not needed offset calculations. While at that move tcpalog allocation closer to the code that defines its size. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07acpi: simplify bios_linker API by removing redundant 'table' argumentIgor Mammedov
'table' argument in bios_linker_add_foo() commands is a data blob of one of files also passed to the same API. So instead of passing blob in every API call, add and keep file name association with related blob at bios_linker_loader_alloc() time. And find blob by name looking up allocated file entries inside of bios_linker_add_foo() commands. It will: - make API less confusing, - enforce calling bios_linker_loader_alloc() before calling any bios_linker_add_foo() - make sure that blob is the correct one, i.e. associated with the right file name Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07acpi: convert linker from GArray to BIOSLinker structureIgor Mammedov
Patch just changes type of of linker variables to a structure, there aren't any functional changes. Converting linker to a structure will allow to extend it functionality in follow up patch adding sanity blob checks. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: acpi: cpuhp-legacy: switch ProcessorID to possible_cpus idxIgor Mammedov
In legacy cpu-hotplug ProcessorID == APIC ID is used in MADT and cpu-hotplug AML. It was fine as both are 8bit and unique. Spec depricated Processor() with corresponding ProcessorID and advises to use Device() and UID instead of it. However UID is just 32bit and it can't fit ARM's arch_id(MPIDR) which is 64bit. Also in case of sparse arch_id() distribution, managment/lookup of maps by arch_id(APIC ID/MPIDR) becomes complex and expensive. In preparation to common CPU hotplug with ARM and to simplify lookup in possible_cpus[] map switch ProcessorID to possible_cpus index in MADT. Legacy cpu-hotplug considerations: HW interface of it is APIC ID based bitmask so it's impossible to change, also CPON package in AML also APIC ID based as well all the methods. To avoid massive rewrite of AML keep is so and just break assumption that ProcessorID == APIC ID, ammending CPU_MAT_METHOD to accept APIC ID and possible_cpus index, it needs them both to patch MADT entry template. Also switch to possible_cpus index Processor(ProcessorID) AML. That way changes to MADT/AML are minimal and kept inside AML/MADT not affecting external interfaces. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: acpi: simplify build_legacy_cpu_hotplug_aml() signatureIgor Mammedov
since IO block used by CPU hotplug is fixed size and initialized it the same file as build_legacy_cpu_hotplug_aml() just use ACPI_GPE_PROC_LEN directly instead of passing it around in several files. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07pc: acpi: mark current CPU hotplug functions as legacyIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07pc: acpi: consolidate \GPE._E02 with the rest of CPU hotplug AMLIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07pc: acpi: consolidate CPU hotplug AMLIgor Mammedov
move the former SSDT part of CPU hoplug close to DSDT part. AML is only moved but there isn't any functional change. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: acpi: remove AML for empty/not used GPE handlersIgor Mammedov
ACPI spec requires GPE handlers only for GPE events that hardware implements. So remove AML for not supported by QEMU device model events. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-05-12ACPI: move acpi_build_srat_memory to common placeShannon Zhao
Move acpi_build_srat_memory to common place so that it could be reused by ARM. Rename it to build_srat_memory. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1461667229-9216-5-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12ACPI: Fix the definition of proximity in AcpiSratMemoryAffinityShannon Zhao
ACPI spec says that Proximity Domain is an "Integer that represents the proximity domain to which the processor belongs". So define it as a uint32_t. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1461667229-9216-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12ACPI: Add GICC Affinity StructureShannon Zhao
Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1461667229-9216-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-13tpm: acpi: remove IRQ from TPM's CRS to make Windows not see conflictIgor Mammedov
IRQ 5 used by TPM conflicts with PNP0C0F IRQs, as result Windows fails driver initialization with reason 'device cannot find enough free resources' But if TPM._CRS.IRQ entry is commented out, Windows seems to initialize driver without errors as it doesn't notice possible conflict and it seems to work probably due to a link with IRQ 5 being unused/disabled. So temporary comment out TPM._CRS.IRQ to 'fix' regression in TPM, with intent to fix it correctly later i.e.: 1. pick unused IRQ as default one for TPM 2. fetch IRQ value from device model so that user could override default one if it conflicts with some other device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-13pc: acpi: tpm: add missing MMIO resource to PCI0._CRSIgor Mammedov
Windows will fail initialize TMP driver with the reason: 'device cannot find enough free resources' That happens because parent BUS doesn't describe MMIO resources used by TPM child device. Fix it by describing it in top-most parent bus scope PCI0. It was 'regressed' by commit 5cb18b3d TPM2 ACPI table support with following fixup 9e472263 acpi: add missing ssdt which did the right thing by moving TPM to BUS it belongs to but lacked a proper resource declaration. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-15hw/acpi: fix GSI links UIDMarcel Apfelbaum
According to the ACPI spec, each UID must be unique. Use the irq number as UID for GSI links. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11pc: acpi: clarify why possible LAPIC entries must be present in MADTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11pc: acpi: drop cpu->found_cpus bitmapIgor Mammedov
cpu->found_cpus bitmap is used for setting present flag in CPON AML package. But it takes a bunch of code to fill bitmap and could be simplified by getting presense info from possible CPUs list directly. So drop cpu->found_cpus bitmap and unroll possible CPUs list into APIC index array at the place where CPUON AML package is created. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-11pc: acpi: create Processor and Notify objects only for valid lapicsIgor Mammedov
do not assume that all lapics in range 0..apic_id_limit are valid and do not create Processor and Notify objects for not possible lapics. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11pc: acpi: create MADT.lapic entries only for valid lapicsIgor Mammedov
do not assume that all lapics in range 0..apic_id_limit are valid and do not create lapic entries for not possible lapics in MADT. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-11pc: acpi: SRAT: create only valid processor lapic entriesIgor Mammedov
When APIC IDs are sparse*, in addition to valid LAPIC entries the SRAT is also filled invalid ones for non possible APIC IDs. Fix it by asking machine for all possible APIC IDs instead of wrongly assuming that all APIC IDs in range 0..apic_id_limit are possible. * sparse lapic topology CLI: -smp x,sockets=2,cores=3,maxcpus=6 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11pc: acpi: cleanup qdev_get_machine() callsIgor Mammedov
cache qdev_get_machine() result in acpi_setup/acpi_build_update time and pass it as an argument to child functions that need it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-11pc: acpi: remove NOP assignmentIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11nvdimm acpi: initialize the resource used by NVDIMM ACPIXiao Guangrong
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into NVDIMM ACPI binary code OSPM uses this port to tell QEMU the final address of the DSM memory and notify QEMU to emulate the DSM method Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11hw/acpi: fix Q35 support for legacy Windows OSMarcel Apfelbaum
Legacy Windows operating systems like Windows XP and Windows 2003 require _DIS method to be present for all interrupt links. PC machines already have a no-op implemented for GSI links, add it also in Q35. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-03-11i386: populate floppy drive information in DSDTRoman Kagan
On x86-based systems Linux determines the presence and the type of floppy drives via a query of a CMOS field. So does SeaBIOS when populating the return data for int 0x13 function 0x08. However Windows doesn't do it. Instead, it requests this information from BIOS via int 0x13/0x08 or through ACPI objects _FDE (Floppy Drive Enumerate) and _FDI (Floppy Drive Information) of the floppy controller object. On UEFI systems only ACPI-based detection is supported. QEMU doesn't provide those objects in its ACPI tables and as a result floppy drives are invisible to Windows on UEFI/OVMF. This patch adds those objects to the floppy controller in DSDT, populating them with the information from respective QEMU objects. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11i386/acpi: make floppy controller object dynamicRoman Kagan
Instead of statically declaring the floppy controller in DSDT, with its _STA method depending on some obscure bit in the parent ISA bridge, add the object dynamically to DSDT via AML API only when the controller is present. The _STA method is no longer necessary and is therefore dropped. So are the declarations of the fields indicating whether the contoller is enabled. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11acpi: allow using object as offset for OperationRegionXiao Guangrong
Extend aml_operation_region() to use object as offset Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-08acpi: pc: add fw_cfg device node to dsdtGabriel L. Somlo
Add a fw_cfg device node to the ACPI DSDT. While the guest-side firmware can't utilize this information (since it has to access the hard-coded fw_cfg device to extract ACPI tables to begin with), having fw_cfg listed in ACPI will help the guest kernel keep a more accurate inventory of in-use IO port regions. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc Marí <markmb@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1455906029-25565-4-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-23bios-linker-loader: document+validate inputMichael S. Tsirkin
While guest/host ABI is documented in hw/acpi/bios-linker-loader.c, the API was left undocumented. This adds documentation for all API functions. Additionally, input is validated to make sure all pointers fall within range of provided files. To allow this validation for checksum commands, bios_linker_loader_add_checksum is changed to accept GArray * in place of void *. Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06pc: set the OEM fields in the RSDT and the FADT from the SLICLaszlo Ersek
The Microsoft spec about the SLIC and MSDM ACPI tables at <http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT. That further affects the FADT, because a similar match between the FADT and the RSDT/XSDT is required by the ACPI spec in general. This patch wires up the previous three patches. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
2016-02-06acpi: expose oem_id and oem_table_id in build_rsdt()Laszlo Ersek
Since build_rsdt() is implemented as common utility code (in "hw/acpi/aml-build.c"), it should expose -- and forward -- the oem_id and oem_table_id parameters between board code and the generic build_header() function. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-02-06acpi: take oem_id in build_header(), optionallyLaszlo Ersek
This patch is the continuation of commit 8870ca0e94f2 ("acpi: support specified oem table id for build_header"). It will allow us to control the OEM ID field too in the SDT header. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> (maintainer:NVDIMM) Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 01:09:51 +0000