aboutsummaryrefslogtreecommitdiff
path: root/hw/i2c
AgeCommit message (Collapse)Author
2023-09-11hw/i2c/aspeed: Fix TXBUF transmission start position errorHang Yu
According to the ast2600 datasheet and the linux aspeed i2c driver, the TXBUF transmission start position should be TXBUF[0] instead of TXBUF[1],so the arg pool_start is useless,and the address is not included in TXBUF.So even if Tx Count equals zero,there is at least 1 byte data needs to be transmitted,and M_TX_CMD should not be cleared at this condition.The driver url is: https://github.com/AspeedTech-BMC/linux/blob/aspeed-master-v5.15/drivers/i2c/busses/i2c-ast2600.c Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn> Fixes: 6054fc73e8f4 ("aspeed/i2c: Add support for pool buffer transfers") Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> (cherry picked from commit 961faf3ddbd8ffcdf776bbcf88af0bc97218114a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-09-11hw/i2c/aspeed: Fix Tx count and Rx size error in buffer pool modeHang Yu
Fixed inconsistency between the regisiter bit field definition header file and the ast2600 datasheet. The reg name is I2CD1C:Pool Buffer Control Register in old register mode and I2CC0C: Master/Slave Pool Buffer Control Register in new register mode. They share bit field [12:8]:Transmit Data Byte Count and bit field [29:24]:Actual Received Pool Buffer Size according to the datasheet. According to the ast2600 datasheet,the actual Tx count is Transmit Data Byte Count plus 1, and the max Rx size is Receive Pool Buffer Size plus 1, both in Pool Buffer Control Register. The version before forgot to plus 1, and mistake Rx count for Rx size. Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn> Fixes: 3be3d6ccf2ad ("aspeed: i2c: Migrate to registerfields API") Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> (cherry picked from commit 97b8aa5ae9ff197394395eda5062ea3681e09c28) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2022-10-24hw/i2c/aspeed: Fix old reg slave receivePeter Delevoryas
I think when Klaus ported his slave mode changes from the original patch series to the rewritten I2C module, he changed the behavior of the first byte that is received by the slave device. What's supposed to happen is that the AspeedI2CBus's slave device's i2c_event callback should run, and if the event is "send_async", then it should populate the byte buffer with the 8-bit I2C address that is being sent to. Since we only support "send_async", the lowest bit should always be 0 (indicating that the master is requesting to send data). This is the code Klaus had previously, for reference. [1] switch (event) { case I2C_START_SEND: bus->buf = bus->dev_addr << 1; bus->buf &= I2CD_BYTE_BUF_RX_MASK; bus->buf <<= I2CD_BYTE_BUF_RX_SHIFT; bus->intr_status |= (I2CD_INTR_SLAVE_ADDR_RX_MATCH | I2CD_INTR_RX_DONE); aspeed_i2c_set_state(bus, I2CD_STXD); break; [1]: https://lore.kernel.org/qemu-devel/20220331165737.1073520-4-its@irrelevant.dk/ Fixes: a8d48f59cd021b25 ("hw/i2c/aspeed: add slave device in old register mode") Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20220820225712.713209-2-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14hw/i2c/pmbus: Add idle state to return 0xff'sPeter Delevoryas
Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Titus Rwantare <titusr@google.com> Message-Id: <20220701000626.77395-2-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: Add new-registers DMA slave mode RX supportPeter Delevoryas
This commit adds support for DMA RX in slave mode while using the new register set in the AST2600 and AST1030. This patch also pretty much assumes packet mode is enabled, I'm not sure if this will work in DMA step mode. This is particularly useful for testing IPMB exchanges between Zephyr and external devices, which requires multi-master I2C support and DMA in the new register mode, because the Zephyr drivers from Aspeed use DMA in the new mode by default. The Zephyr drivers are also using packet mode. The typical sequence of events for receiving data in DMA slave + packet mode is that the Zephyr firmware will configure the slave address register with an address to receive on and configure the bus's function control register to enable master mode and slave mode simultaneously at startup, before any transfers are initiated. RX DMA is enabled in the slave mode command register, and the slave RX DMA buffer address and slave RX DMA buffer length are set. TX DMA is not covered in this patch. When the Aspeed I2C controller receives data from some other I2C master, it will reset the I2CS_DMA_LEN RX_LEN value to zero, then buffer incoming data in the RX DMA buffer while incrementing the I2CC_DMA_ADDR address counter and decrementing the I2CC_DMA_LEN counter. It will also update the I2CS_DMA_LEN RX_LEN value along the way. Once all the data has been received, the bus controller will raise an interrupt indicating a packet command was completed, the slave address matched, a normal stop condition was seen, and the transfer was an RX operation. If the master sent a NACK instead of a normal stop condition, or the transfer timed out, then a slightly different set of interrupt status values would be set. Those conditions are not handled in this commit. The Zephyr firmware then collects data from the RX DMA buffer and clears the status register by writing the PKT_MODE_EN bit to the status register. In packet mode, clearing the packet mode interrupt enable bit also clears most of the other interrupt bits automatically (except for a few bits above it). Note: if the master transmit or receive functions were in use simultaneously with the slave mode receive functionality, then the master mode functions may have raised the interrupt line for the bus before the DMA slave transfer is complete. It's important to have the slave's interrupt status register clear throughout the receive operation, and if the slave attempts to raise the interrupt before the master interrupt status is cleared, then it needs to re-raise the interrupt once the master interrupt status is cleared. (And vice-versa). That's why in this commit, when the master interrupt status is cleared and the interrupt line is lowered, we call the slave interrupt _raise_ function, to see if the interrupt was pending. (And again, vice-versa). Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220630045133.32251-8-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: add slave device in old register modeKlaus Jensen
Add slave mode functionality for the Aspeed I2C controller in old register mode. This is implemented by realizing an I2C slave device owned by the I2C controller and attached to its own bus. The I2C slave device only implements asynchronous sends on the bus, so slaves not supporting that will not be able to communicate with it. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: checkpatch fixes ] Message-Id: <20220601210831.67259-6-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-7-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c: add asynchronous sendKlaus Jensen
Add an asynchronous version of i2c_send() that requires the slave to explicitly acknowledge on the bus with i2c_ack(). The current master must use the new i2c_start_send_async() to indicate that it wants to do an asynchronous transfer. This allows the i2c core to check if the target slave supports this or not. This approach relies on adding a new enum i2c_event member, which is why a bunch of other devices needs changes in their event handling switches. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20220601210831.67259-5-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-6-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c: support multiple mastersKlaus Jensen
Allow slaves to master the bus by registering a bottom halve. If the bus is busy, the bottom half is queued up. When a slave has succesfully mastered the bus, the bottom half is scheduled. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg : - fixed typos in commit log ] Message-Id: <20220601210831.67259-4-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-5-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: Fix MASTER_EN missing error messagePeter Delevoryas
aspeed_i2c_bus_is_master is checking if master mode is enabled in the I2C bus controller's function-control register, not that slave mode is enabled or something. The error here is that the guest is trying to trigger an I2C master mode command while master mode is not enabled. Fixes: ba2cccd64e90f342 ("aspeed: i2c: Add new mode support") Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220630045133.32251-4-me@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: Fix DMA len write-enable bit handlingPeter Delevoryas
I noticed i2c rx transfers were getting shortened to "1" on Zephyr. It seems to be because the Zephyr i2c driver sets the RX DMA len with the RX field write-enable bit set (bit 31) to avoid a read-modify-write. [1] /* 0x1C : I2CM Master DMA Transfer Length Register */ I think we should be checking the write-enable bits on the incoming value, not checking the register array. I'm not sure we're even writing the write-enable bits to the register array, actually. [1] https://github.com/AspeedTech-BMC/zephyr/blob/db3dbcc9c52e67a47180890ac938ed380b33f91c/drivers/i2c/i2c_aspeed.c#L145-L148 Fixes: ba2cccd64e90f34 ("aspeed: i2c: Add new mode support") Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220630045133.32251-3-me@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c/aspeed: Fix R_I2CD_FUN_CTRL referencePeter Delevoryas
Very minor, doesn't effect functionality, but this is supposed to be R_I2CC_FUN_CTRL (new-mode, not old-mode). Fixes: ba2cccd64e9 ("aspeed: i2c: Add new mode support") Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220630045133.32251-2-me@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30hw/i2c: pmbus: Page #255 is valid page for read requests.Maheswara Kurapati
Current implementation of the pmbus core driver treats the read request for page 255 as invalid request and sets the invalid command bit (bit 7) in the STATUS_CML register. As per the PMBus specification it is a valid request. Refer to the PMBus specification, revision 1.3.1, section 11.10 PAGE, on the page 58: "Setting the PAGE to FFh means that all subsequent comands are to be applied to all outputs. Some commands, such as READ_TEMPERATURE, may use a common sensor but be available on all pages of a device. Such implementations are the decision of each device manufacturer or are specified in a PMBus Application Profile. Consult the manufacturer's documents or the Application Profile Specification as needed." For e.g., The VOUT_MODE is a valid command for page 255 for maxim 31785 device. refer to Table 1. PMBus Command Codes on page 14 in the datasheet. https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf Fixes: 38870253f1d1 ("hw/i2c: pmbus: fix error returns and guard against out of range accesses") Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627154703.148943-4-quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed/i2c: Change trace event for NORMAL_STOP statesCédric Le Goater
Using a 'stop' string seems more appropriate than 'normal'. Reviewed-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220628154740.1117349-3-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed/i2c: Enable SLAVE_ADDR_RX_MATCH alwaysCédric Le Goater
There is no 'slave match interrupt' enable bit in the Interrupt Control Register. Consider it is always enabled and extend the mask value 'bus->regs[intr_ctrl_reg]' with the SLAVE_ADDR_RX_MATCH bit when the interrupt is raised. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22hw/i2c/aspeed: add DEV_ADDR in old register modeKlaus Jensen
Add support for writing and reading the device address register in old register mode. On the AST2400 (only 1 slave address) * no upper bits On the AST2500 (2 possible slave addresses), * bit[31] : Slave Address match indicator * bit[30] : Slave Address Receiving pending On the AST2600 (3 possible slave addresses), * bit[31-30] : Slave Address match indicator * bit[29] : Slave Address Receiving pending The model could be more precise to take into account all fields but since the Linux driver is masking the register value being set, it should be fine. See commit 3fb2e2aeafb2 ("i2c: aspeed: disable additional device addresses on ast2[56]xx") from Zeiv. This can be addressed later. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: add details to commit log ] Message-Id: <20220601210831.67259-3-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22hw/i2c/aspeed: rework raise interrupt trace eventKlaus Jensen
Build a single string instead of having several parameters on the trace event. Suggested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: simplified trace buffer creation ] Message-Id: <20220601210831.67259-2-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed/i2c: Add ast1030 controller modelsCédric Le Goater
Based on : https://lore.kernel.org/qemu-devel/20220324100439.478317-2-troy_lee@aspeedtech.com/ Cc: Troy Lee <troy_lee@aspeedtech.com> Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Move regs and helpers to header fileJoe Komlodi
Moves register definitions and short commonly used inlined functiosn to the header file to help tidy up the implementation file. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324 Message-Id: <20220331043248.2237838-8-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Add PKT_DONE IRQ to traceJoe Komlodi
Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I566eb09f4b9016e24570572f367627f6594039f5 Message-Id: <20220331043248.2237838-7-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Add new mode supportJoe Komlodi
On AST2600, I2C has a secondary mode, called "new mode", which changes the layout of registers, adds some minor behavior changes, and introduces a new way to transfer data called "packet mode". Most of the bit positions of the fields are the same between old and new mode, so we use SHARED_FIELD_XX macros to reuse most of the code between the different modes. For packet mode, most of the command behavior is the same compared to other modes, but there are some minor changes to how interrupts are handled compared to other modes. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e Message-Id: <20220331043248.2237838-6-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Use reg array instead of individual varsJoe Komlodi
Using a register array will allow us to represent old-mode and new-mode I2C registers by using the same underlying register array, instead of adding an entire new set of variables to represent new mode. As part of this, we also do additional cleanup to use ARRAY_FIELD_ macros instead of FIELD_ macros on registers. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: Ib94996b17c361b8490c042b43c99d8abc69332e3 [ clg: use of memset in aspeed_i2c_bus_reset() ] Message-Id: <20220331043248.2237838-5-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed: i2c: Migrate to registerfields APIJoe Komlodi
This cleans up some of the field accessing, setting, and clearing bitwise operations, and wraps them in macros instead. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I33018d6325fa04376e7c29dc4a49ab389a8e333a Message-Id: <20220331043248.2237838-4-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-09acpi: ich9-smb: add support for AcpiDevAmlIf interfaceIgor Mammedov
wire AcpiDevAmlIf interface to build ich9-smb and its slave devices AML. It will be used by followup patches to switch from creating AML in ad-hoc way to a more systematic one that will scan present devices and ask them to provide their AML code like it's done with ISA devices. This patch is a partial conversion, as it only fetches AML from slave devices attached to its I2C bus. The conversion will be completed when PCI bus is switched to use AcpiDevAmlIf and build_smb0() could be dropped. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-16-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-21Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Patch created mechanically with: $ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \ --macro-file scripts/cocci-macro-file.h FILES... Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20220315144156.1595462-4-armbru@redhat.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
2022-03-08hw/i2c: Added linear mode translation for pmbus devicesShengtan Mao
Signed-off-by: Shengtan Mao <stmao@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-7-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/i2c: pmbus: refactor uint handlingTitus Rwantare
This change cleans up the inputs to pmbus_receive uint, the length of received data is contained in PMBusDevice state and doesn't need to be passed around. Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-5-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/i2c: pmbus: add PEC unsupported warningTitus Rwantare
Signed-off-by: Titus Rwantare <titusr@google.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220307200605.4001451-4-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/i2c: pmbus: fix error returns and guard against out of range accessesTitus Rwantare
Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-3-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/i2c: pmbus: add registersTitus Rwantare
- add the VOUT_MIN and STATUS_MFR registers Signed-off-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <20220307200605.4001451-2-titusr@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-02hw/i2c: flatten pca954x mux devicePatrick Venture
Previously this device created N subdevices which each owned an i2c bus. Now this device simply owns the N i2c busses directly. Tested: Verified devices behind mux are still accessible via qmp and i2c from within an arm32 SoC. Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220202164533.1283668-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-21Kconfig: Add I2C_DEVICES device groupPeter Maydell
Currently there is no way for a board model's Kconfig stanza to say "I have an i2c bus which the user can plug an i2c device into, build all the free-standing i2c devices". The Kconfig mechanism for this is the "device group". Add an I2C_DEVICES group along the same lines as the existing PCI_DEVICES. Simple free-standing i2c devices which a user might plausibly want to be able to plug in on the QEMU commandline should have default y if I2C_DEVICES and board models which have an i2c bus that is user-accessible should use imply I2C_DEVICES to cause those pluggable devices to be built. In this commit we mark only a fairly conservative set of i2c devices as belonging to the I2C_DEVICES group: the simple sensors and RTCs (not including PMBus devices or devices which need GPIO lines to be connected). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
2021-10-12aspeed/i2c: QOMify AspeedI2CBusCédric Le Goater
Introduce an AspeedI2CBus SysBusDevice model and attach the associated memory region and IRQ to the newly instantiated objects. Before this change, the I2C bus IRQs were all attached to the SysBusDevice model of the I2C controller. Adapt the AST2600 SoC realize routine to take into account this change. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-07-29i2c/smbus_eeprom: Add feature bit to SPD dataBALATON Zoltan
Add the differential clock input feature bit to the generated SPD data. Most guests don't seem to care but pegasos2 firmware version 1.2 checks for this bit and stops with unsupported module type error if it's not present. Since this feature is likely present on real memory modules add it in the general code rather than patching the generated SPD data in pegasos2 board only. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <19d42ade295d5297aa624a9eb757b8df18cf64d6.1626367844.git.balaton@eik.bme.hu> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-08hw/i2c: add support for PMBusTitus Rwantare
QEMU has support for SMBus devices, and PMBus is a more specific implementation of SMBus. The additions made in this commit makes it easier to add new PMBus devices to QEMU. https://pmbus.org/specification-archives/ Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-2-titusr@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Introduce i2c_start_recv() and i2c_start_send()Philippe Mathieu-Daudé
To ease reviewing code using the I2C bus API, introduce the i2c_start_recv() and i2c_start_send() helpers which don't take the confusing 'is_recv' boolean argument. Use these new helpers in the SMBus / AUX bus models. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()Philippe Mathieu-Daudé
To allow further simplications, extract i2c_do_start_transfer() from i2c_start_transfer(). This is mostly the same function, but the former is static and takes an enum argument. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Make i2c_start_transfer() direction argument a booleanBALATON Zoltan
Make the argument representing the direction of the transfer a boolean type. Rename the boolean argument as 'is_recv' to match i2c_recv_send(). Document the function prototype. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20200621145235.9E241745712@zero.eik.bme.hu> [PMD: Split patch, added docstring] Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()Philippe Mathieu-Daudé
Other functions from I2C slave API are named "i2c_slave_XXX()". Follow that pattern with set_address(). Add docstring along. No logical change. Patch created mechanically using: $ sed -i s/i2c_set_slave_address/i2c_slave_set_address/ \ $(git grep -l i2c_set_slave_address) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Remove confusing i2c_send_recv()Philippe Mathieu-Daudé
We replaced all the i2c_send_recv() calls by the clearer i2c_recv() and i2c_send(), so we can remove this confusing API. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()Philippe Mathieu-Daudé
Instead of using the confuse i2c_send_recv(), rewrite to directly call i2c_recv() & i2c_send(), resulting in code easier to review. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c/ppc4xx_i2c: Add reference to datasheetPhilippe Mathieu-Daudé
It took me a while to find this model datasheet, since it is an OCR scan. Add a reference to save other developers time. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-14Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into ↵Peter Maydell
staging Add a bus multiplexer device This patch set adds a bus multiplexer and the necessary infrastructure in the I2C code to allow it to work. These are common on systems with lots of I2C devices, like an IPMI BMC. # gpg: Signature made Thu 13 May 2021 22:48:07 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-v1: hw/i2c: add pca954x i2c-mux switch hw/i2c: move search to i2c_scan_bus method hw/i2c: add match method for device search hw/i2c: name I2CNode list in I2CBus Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210503 # gpg: Signature made Mon 03 May 2021 09:34:56 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits) hw/rx/rx-gdbsim: Do not accept invalid memory size docs: More precisely describe memory-backend-*::id's user scripts: fix generation update-binfmts templates docs/system: Document the removal of "compat" property for POWER CPUs mc146818rtc: put it into the 'misc' category Do not include exec/address-spaces.h if it's not really necessary Do not include cpu.h if it's not really necessary Do not include hw/boards.h if it's not really necessary Do not include sysemu/sysemu.h if it's not really necessary hw: Do not include qemu/log.h if it is not necessary hw: Do not include hw/irq.h if it is not necessary hw: Do not include hw/sysbus.h if it is not necessary hw: Remove superfluous includes of hw/hw.h ui: Fix memory leak in qemu_xkeymap_mapping_table() hw/usb: Constify VMStateDescription hw/display/qxl: Constify VMStateDescription hw/arm: Constify VMStateDescription vmstate: Constify some VMStateDescriptions Fix typo in CFI build documentation hw/pcmcia: Do not register PCMCIA type if not required ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-01aspeed/i2c: Rename DMA address spaceCédric Le Goater
It improves 'info mtree' output. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210407171637.777743-5-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01aspeed/i2c: Fix DMA address maskCédric Le Goater
The RAM memory region is now used for DMAs accesses instead of the memory address space region. Mask off the top bits of the DMA address to reflect this change. Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210407171637.777743-4-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-04-15hw/i2c: add pca954x i2c-mux switchPatrick Venture
The pca954x is an i2c mux, and this adds support for two variants of this device: the pca9546 and pca9548. This device is very common on BMCs to route a different channel to each PCIe i2c bus downstream from the BMC. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Message-Id: <20210412194522.664594-5-venture@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-04-15hw/i2c: move search to i2c_scan_bus methodPatrick Venture
Moves the search for matching devices on an i2c bus into a separate method. This allows for an object that owns an I2CBus can avoid duplicating this method. Tested: A BMC firmware was booted to userspace and i2c devices were detected. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-Id: <20210412194522.664594-4-venture@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 06:56:02 +0000