aboutsummaryrefslogtreecommitdiff
path: root/hw/i2c
AgeCommit message (Collapse)Author
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-07-03hw/i2c/bitbang_i2c: Use in-place rather than malloc'd bitbang_i2c_interface ↵Peter Maydell
struct Currently the bitbang_i2c_init() function allocates a bitbang_i2c_interface struct which it returns. This is unfortunate because it means that if the function is used from a DeviceState init method then the memory will be leaked by an "init then delete" cycle, as used by the qmp/hmp commands that list device properties. Since three out of four of the uses of this function are in device init methods, switch the function to do an in-place initialization of a struct that can be embedded in the device state struct of the caller. This fixes LeakSanitizer leak warnings that have appeared in the patchew configuration (which only tries to run the sanitizers for the x86_64-softmmu target) now that we use the bitbang-i2c code in an x86-64 config. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190702163844.20458-1-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28i2c: Move bitbang_i2c.h to include/hw/i2c/BALATON Zoltan
The bitbang i2c implementation is also useful for other device models such as DDC in display controllers. Move the header to include/hw/i2c/ to allow it to be used from other device models and adjust users of this include. This also reverts commit 2b4c1125ac which is no longer needed. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 5d1fe4db846ab9be4b77ddb0d43cc74cd200a003.1561028123.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-13hw/arm: Express dependencies of realview, versatile and vexpress with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-08hw/i2c/smbus_ich9: Fix the confusing contributions-after-2012 statementThomas Huth
The license information in this file is rather confusing. The text declares LGPL first, but then says that contributions after Jan 2012 are licensed under the GPL instead. How should the average user who just downloaded the release tarball know which part is now GPL and which is LGPL? Also, as far as I can see, the file has been added to QEMU *after* January in 2012, so the whole file should be GPL by default instead. Furthermore, looking at the text of the LGPL (see COPYING.LIB in the top directory), the license clearly states in section "3." that one should rather replace the license information in such a case instead. Thus let's clean up the confusing statements and use the proper GPL text only. Message-Id: <1549471435-21887-1-git-send-email-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-07i2c-ddc: move it to hw/displayPaolo Bonzini
Move it together with the other EDID code. hw/i2c should only include the core and the adapters, not the slaves. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20190325155923.30987-1-pbonzini@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-12PPC: E500: Add FSL I2C controller and integrate RTC with itAndrew Randrianasulu
Original commit message: This patch adds an emulation model for i2c controller found on most of the FSL SoCs. It also integrates the RTC (ds1338) that sits on the i2c Bus with e500 machine model. Patch was originally written by Amit Singh Tomar <amit.tomar@freescale.com> see http://patchwork.ozlabs.org/patch/431475/ I only fixed it enough for application on top of current qemu master 20b084c4b1401b7f8fbc385649d48c67b6f43d44, and hopefully fixed checkpatch errors Tested by booting Linux kernel 4.20.12. Now e500 machine doesn't need network time protocol daemon because it will have working RTC (before all timestamps on files were from 2016) Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com> Signed-off-by: Andrew Randrianasulu <randrianasulu@gmail.com> Message-Id: <20190306102812.28972-1-randrianasulu@gmail.com> [dwg: Add Kconfig stanza to define the new symbol, update MAINTAINERS] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-07display: express dependencies with kconfigYang Zhong
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-40-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386: express dependencies with KconfigPaolo Bonzini
This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-27i2c: Verify that the count passed in to smbus_eeprom_init() is validCorey Minyard
Keep someone from passing in a bogus number Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus_eeprom: Add a reset function to smbus_eepromCorey Minyard
Reset the contents to init data and reset the offset on a machine reset. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c:smbus_eeprom: Add vmstate handling to the smbus eepromCorey Minyard
Transfer the state of the EEPROM on a migration. This way the data remains consistent on migration. This required moving the actual data to a separate array and using the data provided in the init function as a separate initialization array, since a pointer property has to be a void * and the array needs to be uint8_t[]. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:smbus_eeprom: Add a size constant for the smbus_eeprom sizeCorey Minyard
It was hard-coded to 256 in a number of places, create a constant for that. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c:smbus_eeprom: Add normal type name and cast to smbus_eeprom.cCorey Minyard
Create a type name and a cast macro and use those through the code. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c:smbus_slave: Add an SMBus vmstate structureCorey Minyard
There is no vmstate handling for SMBus, so no device sitting on SMBus can have a state transfer that works reliably. So add it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:pm_smbus: Fix state transferCorey Minyard
Transfer the state information for the SMBus registers and internal data so it will work on a VM transfer. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-27i2c:pm_smbus: Fix pm_smbus handling of I2C block readCorey Minyard
The I2C block read function of pm_smbus was completely broken. It required doing some direct I2C handling because it didn't have a defined size, the OS code just reads bytes until it marks the transaction finished. This also required adjusting how the AMIBIOS workaround code worked, the I2C block mode was setting STS_HOST_BUSY during a transaction, so that bit could no longer be used to inform the host status read code to start the transaction. Create a explicit bool for that operation. Also, don't read the next byte from the device in byte-by-byte mode unless the OS is actually clearing the byte done bit. Just assuming that's what the OS is doing is a bad idea. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Make white space in switch statements consistentCorey Minyard
It had spaces between cases in some places and not others. Add a space for every one. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus_eeprom: Get rid of the quick commandCorey Minyard
It's not necessary, it won't be called if it's NULL. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Simplify read handlingCorey Minyard
There were two different read functions, and with the removal of the command passed in there is no functional difference. So remove one of them. With that you don't need one of the states, so that can be removed, too. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Simplify write operationCorey Minyard
There were two different write functions and the SMBus code kept track of the command. Keeping track of the command wasn't useful, in fact it wasn't quite correct for the eeprom_smbus code. And there is no need for two write functions. Just have one write function and the first byte in the buffer is the command. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c:smbus: Correct the working of quick commandsCorey Minyard
The logic of handling quick SMBus commands was wrong. If you get a finish event with no data, that's a quick command. Document the quick command while we are at it. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-27i2c: Don't check return value from i2c_recv()Corey Minyard
i2c_recv() cannot fail, so there is no need to check the return value. It also returns unt8_t, so comparing with < 0 is not meaningful. Fix up various I2C controllers to remove the unneeded code. Signed-off-by: Corey Minyard <cminyard@mvista.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27i2c: Split smbus into partsCorey Minyard
smbus.c and smbus.h had device side code, master side code, and smbus.h has some smbus_eeprom.c definitions. Split them into separate files. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-05hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI ↵Paolo Bonzini
controller Create separate variables for these components, they are used in many boards but not all. This allows finer-grain selection of the included code with default-configs/*.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-04smbus: Add a helper to generate SPD EEPROM dataBALATON Zoltan
There are several boards with SPD EEPROMs that are now using duplicated or slightly different hard coded data. Add a helper to generate SPD data for a memory module of given type and size that could be used by these boards (either as is or with further changes if needed) which should help cleaning this up and avoid further duplication. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-29arm: Stub out NRF51 TWI magnetometer/accelerometer detectionSteffen Görtz
Recent microbit firmwares panic if the TWI magnetometer/accelerometer devices are not detected during startup. We don't implement TWI (I2C) so let's stub out these devices just to let the firmware boot. Signed-off by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190110094020.18354-2-stefanha@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed comment style] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11i2c-ddc: fix oob readGerd Hoffmann
Suggested-by: Michael Hanselmann <public@hansmi.ch> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael Hanselmann <public@hansmi.ch> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190108102301.1957-1-kraxel@redhat.com
2018-12-12i2c: Move typedef of bitbang_i2c_interface to i2c.hBALATON Zoltan
Clang 3.4 considers duplicate typedef in ppc4xx_i2c.h and bitbang_i2c.h an error even if they are identical. Move it to a common place to allow building with this clang version. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-12-06i2c: pm_smbus: check smb_index before block transfer writePrasad J Pandit
While performing block transfer write in smb_ioport_writeb(), 'smb_index' is incremented and used to index smb_data[] array. Check 'smb_index' value to avoid OOB access. Note that this bug is exploitable by a guest to escape from the virtual machine. However the commit which introduced the bug was only made after the 3.0 release, and so it is not present in any released QEMU versions. Fixes: 38ad4fae43 i2c: pm_smbus: Add block transfer capability Reported-by: Michael Hanselmann <public@hansmi.ch> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael Hanselmann <public@hansmi.ch> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20181206121830.6177-1-ppandit@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-03i2c: Add a length check to the SMBus write handlingCorey Minyard
Avoid an overflow. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: QEMU Stable <qemu-stable@nongnu.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-15i2c: switch ddc to use the new edid generatorGerd Hoffmann
This also makes the default display resolution configurable, via xres and yres properties. The default is 1024x768. The old code had a hard-coded resolution of 1600x1200. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20181005110837.28209-1-kraxel@redhat.com
2018-09-25aspeed/i2c: Fix receive done interrupt handlingGuenter Roeck
The AST2500 datasheet says: I2CD10 Interrupt Status Register bit 2 Receive Done Interrupt status S/W needs to clear this status bit to allow next data receiving The Rx interrupt done interrupt status bit needs to be cleared explicitly before the next byte can be received, and must therefore not be auto-cleared. Also, receiving the next byte must be delayed until the bit has been cleared. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180914063506.20815-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25aspeed/i2c: Handle receive command in separate functionGuenter Roeck
Receive command handling may have to be deferred if a previous receive done interrupt was not yet acknowledged. Move receive command handling into a separate function to prepare for the necessary changes. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180914063506.20815-3-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25aspeed/i2c: interrupts should be cleared by software onlyCédric Le Goater
aspeed i2c interrupts should be cleared by software only, and the bus interrupt should be lowered when all interrupts have been cleared. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180914063506.20815-2-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: drop TODO comment describing an issue which is fixed later in the patch series, and clean up commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-23i2c: pm_smbus: Add the ability to force block transfer enableCorey Minyard
The PIIX4 hardware has block transfer buffer always enabled in the hardware, but the i801 does not. Add a parameter to pm_smbus_init to force on the block transfer so the PIIX4 handler can enable this by default, as it was disabled by default before. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-9-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23i2c: pm_smbus: Don't delay host status register busy bit when interrupts are ↵Corey Minyard
enabled Change 880b1ffe6ec2f0ae "smbus: do not immediately complete commands" changed pm_smbus to delay setting the host busy bit until the status register was read, to work around a bug in AMIBIOS. Unfortunately, when interrupts are enabled, the status register will never get read and the processing will never happen. Modify the code to only delay setting the host busy bit if interrupts are not enabled. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Hervé Poussineau <hpoussin@reactos.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1534796770-10295-8-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23i2c: pm_smbus: Add interrupt handlingCorey Minyard
Add the necessary code so that interrupts actually work from the pm_smbus device. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-7-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23i2c: pm_smbus: Add block transfer capabilityCorey Minyard
There was no block transfer code in pm_smbus.c, and it is needed for some devices. So add it. This adds both byte-by-byte block transfers and buffered block transfers. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-5-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23i2c: pm_smbus: Make the I2C block read command read-onlyCorey Minyard
It did have write capability, but the manual says the behavior with write enabled is undefined. So just set an error in this case. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-4-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23i2c: pm_smbus: Fix the semantics of block I2C transfersCorey Minyard
The I2C block transfer commands was not implemented correctly, it read a length byte and such like it was an smbus transfer. So fix the smbus_read_block() and smbus_write_block() functions so they can properly handle I2C transfers, and normal SMBus transfers (for upcoming changes). Pass in a transfer size and a bool to know whether to use the size byte (like SMBus) or use the length given (like I2C). Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-3-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23i2c: pm_smbus: Clean up some style issuesCorey Minyard
Fix some spacing issues, remove extraneous comments, add some defines instead of hard-coding numbers. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1534796770-10295-2-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-03ppc4xx_i2c: Rewrite to model hardware more closelyBALATON Zoltan
Rewrite to make it closer to how real device works so that guest OS drivers can access I2C devices. Previously this was only a hack to allow U-Boot to get past accessing SPD EEPROMs but to support other I2C devices and allow guests to access them we need to model real device more properly. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-26hw/i2c/omap_i2c: Use qemu_log_mask(UNIMP) instead of fprintfPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180624040609.17572-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 16:34:15 +0000