aboutsummaryrefslogtreecommitdiff
path: root/hw/hw.h
AgeCommit message (Collapse)Author
2009-09-11vmstate: port cirrus_vga deviceJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: add uint64 array supportJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: add support for arrays of uint16_tJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: add support for uint8_t equalJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: Add pre/post_save() hooksJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: Add pre_load() hookJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: rename run_after_load() -> post_load()Juan Quintela
This naming was used in kvm tree, and is easier to remember Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11vmstate: add sensible arguments to vmstate_unregister()Juan Quintela
vmsd alone is not enugh, because we can have several structs saved with the same description (vmsd). Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09Fix VMSTATE_PCI_DEVICE versionJuan Quintela
PCI device entries have to have a default version, not 2, because they are used in the midle of other structures that can have _any_ version number. We can't use proper versioning here until we have SubSections support. Why we didn't noticed before? Because in a PC, the only device ported with a version less that 2 is piix_pm, and for that one, default pci values are right. If you use a virtio-console, you will see that its state it is not loaded back. Thanks to Amit Shah for reporting the problem and help debug the fix. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-31Add VMState support for ptimersBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27Add VMState support to run a function after loadJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Port PCIDevice state to VMStateJuan Quintela
This uses a variant of buffer, with extra checks. Also uses the new support for cheking that a read value is less or equal than a field. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for int32_t check valueJuan Quintela
We read the saved value and check that it is less or equal than the one stored in the structure. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for static sized buffers (uint_8)Juan Quintela
This patch adds support for static sized buffer and typecheks that the buffer is right. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for variable sized arraysJuan Quintela
This patch add supports for variable sized arrays whose size is another field of the state. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for int32_t check valueJuan Quintela
We read the saved value and check that it is the same that the one is stored in the structure. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for arrays of structsJuan Quintela
This patch add supports for arrays of structs Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for structsJuan Quintela
This patch adds support for saving one VMStateDescription from other VMStateDescription. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for arraysJuan Quintela
This patch adds support for saving arrays inside the struct Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for pointersJuan Quintela
This patch adds support for saving pointers to values Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27New VMstate save/load infrastructureJuan Quintela
This patch introduces VMState infrastructure, to convert the save/load functions of devices to a table approach. This new approach has the following advantages: - it is type-safe - you can't have load/save functions out of sync - will allows us to have new interesting commands, like dump <device>, that shows all its internal state. - Just now, the only added type is arrays, but we can add structures. - Uses old load_state() function for loading old state. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27add file descriptor migrationPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24unify popen/fopen qemu wrappersPaolo Bonzini
While reading Chris's code for fd migration I noticed the duplication between QEMUFilePopen and QEMUFileStdio. This fixes it, and makes qemu_fopen more similar qemu_popen. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Add qemu_unregister_resetJan Kiszka
Will be used by '-boot once=...', and should also help in other use cases. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Move boot_set callback backendJan Kiszka
Move registration function for the boot_set callback handler and provide qemu_boot_set so that it can also be used outside the monitor code. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09split out ioport related stuffs from vl.c into ioport.c.Isaku Yamahata
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27Allow monitor interaction when using migrate -execChris Lalancette
All, I've recently been playing around with migration via exec. Unfortunately, when starting the incoming qemu process with "-incoming exec:cmd", it suffers the same problem that -incoming tcp used to suffer; namely, that you can't interact with the monitor until after the migration has happened. This causes problems for libvirt usage of -incoming exec, since libvirt expects to be able to access the monitor ahead of time. This fairly simple patch allows you to access the monitor both before and after the migration has completed using exec. (note: developed/tested with qemu-kvm, but applies perfectly fine to qemu) Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22introduce set_rate_limit function for QEMUFileGlauber Costa
This patch converts the current callers of qemu_fopen_ops(). Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-19Hardware convenience libraryPaul Brook
The only target dependency for most hardware is sizeof(target_phys_addr_t). Build these files into a convenience library, and use that instead of building for every target. Remove and poison various target specific macros to avoid bogus target dependencies creeping back in. Big/Little endian is not handled because devices should not know or care about this to start with. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-17Add unregister_savevm() (Mark McLoughlin)aliguori
Currently there's no way to unregister a savevm callback, so e.g. if a NIC is hot-unplugged and a savevm is issued, we'll segfault. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7148 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05create qemu_file_set_error (Glauber Costa)aliguori
This is mainly for consistency, since we don't want anything outside of savevm setting it explicitly. There are current no users of that in qemu tree, but there are potential candidates on kvm-userspace. And avi is a nice guy, let's be nice with him. Based on a patch by Yaniv Kamay Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6998 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-11Reintroduce migrate-to-exec: support (Charles Duffy)aliguori
KVM's live migration support included support for exec: URLs, allowing system state to be written or received via an arbitrary popen()ed subprocess. This provides a convenient way to pipe state through a compression algorithm or an arbitrary network transport on its way to its destination, and a convenient way to write state to disk; libvirt's qemu driver currently uses migration to exec: targets for this latter purpose. This version of the patch refactors now-common code from migrate-tcp.c into migrate.c. Signed-off-by: Charles Duffy <Charles_Duffy@messageone.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5694 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-24Live migration for Win32 (Hervé Poussineau)aliguori
This patch fixes migration so that it works on Win32. This requires using socket specific calls since sockets cannot be treated like file descriptors on win32. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5525 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-13Fix some issues with QEMUFilealiguori
This patch allows QEMUFile's read and write operations to return negative error codes. This is necessary to detect things like closed streams during live migration. It also removes unused code for QEMUFileFD write path. Finally, it makes sure to avoid attempting to flush an output buffer if the file is only being used for input. This was spotted by Uri Lublin. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5474 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-06Introduce v3 of savevm protocolaliguori
The current savevm/loadvm protocol has some draw backs. It does not support the ability to do progressive saving which means it cannot be used for live checkpointing or migration. The sections sizes are 32-bit integers which means that it will not function when using more than 4GB of memory for a guest. It attempts to seek within the output file which means it cannot be streamed. The current protocol also is pretty lax about how it supports forward compatibility. If a saved section version is greater than what the restore code support, the restore code generally treats the saved data as being in whatever version it supports. This means that restoring a saved VM on an older version of QEMU will likely result in silent guest failure. This patch introduces a new version of the savevm protocol. It has the following features: * Support for progressive save of sections (for live checkpoint/migration) * An asynchronous API for doing save * Support for interleaving multiple progressive save sections (for future support of memory hot-add/storage migration) * Fully streaming format * Strong section version checking Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5434 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-02Resurrect the safe part of r5274blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5401 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-29Refactor QEMUFile for live migrationaliguori
To support live migration, we override QEMUFile so that instead of writing to disk, the save/restore state happens over a network connection. This patch makes QEMUFile read/write operations function pointers so that we can override them for live migration. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5352 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-25Revert r5274 which breaks savevm/loadvmblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5321 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-20Add signed versions of save/load functionsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5274 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-20Add an opaque parameter to boot_set API, move function to monitor.cblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4763 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-04Allow bootdevice change from the monitoraurel32
(Gildas Le Nadan) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4333 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 18:49:51 +0000