aboutsummaryrefslogtreecommitdiff
path: root/hw/hppa
AgeCommit message (Collapse)Author
2022-05-08machine.c: map DINO device during board configurationMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-15-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: change dino_init() to return the DINO device instead of PCIBusMark Cave-Ayland
This is in preparation for using more qdev APIs during the configuration of the HPPA generic machine. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-14-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa ↵Mark Cave-Ayland
machine DINO refers to the GSC-PCI bridge device which will soon be handled separately, however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU MAINTAINERS file. Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO and also update the machine description accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-13-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: split declarations from dino.c into dino.hMark Cave-Ayland
This is to allow access to DinoState from outside dino.c. With the changes to the headers it is now possible to remove the duplicate definition for TYPE_DINO_PCI_HOST_BRIDGE from hppa_sys.h. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-12-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: return PCIBus from dino_init() using qdev_get_child_bus()Mark Cave-Ayland
This allows access to the PCI bus without having to reference parent_obj directly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-11-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: use QOM cast instead of directly referencing parent_objMark Cave-Ayland
Use a QOM cast in both dino_chip_read_with_attrs() and dino_chip_write_with_attrs() instead of directly referencing parent_obj. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-10-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: move initial register configuration to new dino_pcihost_reset() functionMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-9-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: move PCI bus master address space setup to dino_pcihost_realize()Mark Cave-Ayland
Add a new dino_pcihost_unrealize() function to remove the address space when the device is unrealized. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-8-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: move pci_setup_iommu() to dino_pcihost_init()Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-7-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: add memory-as property containing a link to the memory address spaceMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-6-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: move PCI windows initialisation to dino_pcihost_init()Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-5-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: move PCI bus initialisation to dino_pcihost_init()Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-4-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: move registers from dino_init() to DINO_PCI_BRIDGE init functionMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-3-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-08dino: checkpatch fixesMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-02hppa: Add support for an emulated TOC/NMI button.Helge Deller
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB in Linux. This patch adds support for such an emulated TOC button. It wires up the qemu monitor "nmi" command to trigger a TOC. For that it provides the hppa_nmi function which is assigned to the nmi_monitor_handler function pointer. When called it raises the EXCP_TOC hardware interrupt in the hppa_cpu_do_interrupt() function. The interrupt function then calls the architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address 0xf0000000). According to the PA-RISC PDC specification, the SeaBIOS firmware then writes the CPU registers into PIM (processor internal memmory) for later analysis. In order to write all registers it needs to know the contents of the CPU "shadow registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are provided by qemu in shadow registers when entering the SeaBIOS TOC function. This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which restores the original values of the shadow registers. With this opcode SeaBIOS can store those registers as well into PIM before calling an OS-provided TOC handler. To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the command "nmi". After the TOC started the OS-debugger, exit the qemu monitor with Ctrl-A C. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-02-02hw/hppa: Allow up to 16 emulated CPUsHelge Deller
This brings the hppa_hardware.h file in sync with the copy in the SeaBIOS-hppa sources. In order to support up to 16 CPUs, it's required to move the HPA for MEMORY_HPA out of the address space of the new 16th CPU. The new address of 0xfffff000 worked well for Linux and HP-UX, while other addresses close to the former 0xfffbf000 area are used by the architecture for local and global broadcasts. The PIM_STORAGE_SIZE constant is used in SeaBIOS sources and is relevant for the TOC/NMI feature. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include hw/boards.h if it's not really necessaryThomas Huth
Stop including hw/boards.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-3-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Remove superfluous includes of hw/hw.hThomas Huth
The include/hw/hw.h header only has a prototype for hw_error(), so it does not make sense to include this in files that do not use this function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210326151848.2217216-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-01-04hw: Use the PCI_SLOT() macro from 'hw/pci/pci.h'Philippe Mathieu-Daudé
We already have a generic PCI_SLOT() macro in "hw/pci/pci.h" to extract the PCI slot identifier, use it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Paul Durrant <paul@xen.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20201012124506.3406909-5-philmd@redhat.com>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hppa: do not use ram_size globalPaolo Bonzini
Use the machine properties instead. Cc: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hppa: remove bios_namePaolo Bonzini
Cc: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201026143028.3034018-5-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02hw/hppa: Add power button emulationHelge Deller
Emulate a power button switch, tell SeaBIOS the address via fw_cfg and bind the power button to the qemu UI. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-02hw/hppa: Tell SeaBIOS port address of fw_cfgHelge Deller
Change QEMU_FW_CFG_IO_BASE to shorter variant FW_CFG_IO_BASE and hand over the actual port address in %r19 to SeaBIOS. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-02hw/hppa: Change fw_cfg port addressHelge Deller
Devices on hppa occupy at least 4k starting at the HPA, so MEMORY_HPA+4k is blocked (by Linux) for the memory module. I noticed this when testing the new Linux kernel patch to let the fw_cfg entries show up in Linux under /proc. The Linux kernel driver could not allocate the region for fw_cfg. This new base address seems to not conflict. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-02hw/hppa: Store boot device in fw_cfg sectionHelge Deller
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
2020-09-02hw/hppa: Make number of TLB and BTLB entries configurableHelge Deller
Until now the TLB size was fixed at 256 entries. To allow operating systems to utilize more TLB entries in the future, we need to tell firmware how many TLB entries we actually support in the emulation. Firmware then reports this to the operating system via the PDC_CACHE_INFO call. This patch simply does the preparation to allow more TLB entries. Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-26Merge remote-tracking branch ↵Peter Maydell
'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging artist out of bounds fixes # gpg: Signature made Wed 26 Aug 2020 22:09:55 BST # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * remotes/hdeller/tags/target-hppa-v3-pull-request: hw/display/artist: Fix invalidation of lines near screen border hw/display/artist: Fix invalidation of lines in artist_draw_line() hw/display/artist: Unbreak size mismatch memory accesses hw/display/artist: Prevent out of VRAM buffer accesses Revert "hw/display/artist: Avoid drawing line when nothing to display" hw/display/artist: Refactor artist_rop8() to avoid buffer over-run hw/display/artist: Check offset in draw_line to avoid buffer over-run hw/hppa/lasi: Don't abort on invalid IMR value hw/display/artist.c: fix out of bounds check hw/hppa: Implement proper SeaBIOS version check seabios-hppa: Update to SeaBIOS hppa version 1 hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-26hw/hppa/lasi: Don't abort on invalid IMR valueHelge Deller
NetBSD initializes the LASI IMR value with 0xffffffff to disable all LASI interrupts. This triggered an assert() and stopped the emulation. By replacing the check with a warning in the guest log we now allow NetBSD to boot again. Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-21meson: convert hw/arch*Marc-André Lureau
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up from there when building the per-emulator static_library. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-04hw/hppa: Implement proper SeaBIOS version checkHelge Deller
It's important that the SeaBIOS hppa firmware is at least at a minimal level to ensure proper interaction between qemu and firmware. Implement a proper firmware version check by telling SeaBIOS via the fw_cfg interface which minimal SeaBIOS version is required by this running qemu instance. If the firmware detects that it's too old, it will stop. Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-04hw/hppa: Sync hppa_hardware.h file with SeaBIOS sourcesHelge Deller
The hppa_hardware.h file is shared with SeaBIOS. Sync it. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-09hw/hppa/dino: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200601142930.29408-7-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-17hw/ide: Remove unneeded inclusion of hw/ide.hBALATON Zoltan
After previous clean ups we can drop direct inclusion of hw/ide.h from several places. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: a3f72b663e537701c63cec5fc9cb8ed4f4249f28.1584457537.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2020-03-09hw/hppa/machine: Include "net/net.h"Philippe Mathieu-Daudé
hw/hppa/machine.c uses NICInfo variables which are declared in "net/net.h". Include it. This fixes (when modifying unrelated headers): hw/hppa/machine.c:126:21: error: use of undeclared identifier 'nb_nics' for (i = 0; i < nb_nics; i++) { ^ hw/hppa/machine.c:127:30: error: use of undeclared identifier 'nd_table' pci_nic_init_nofail(&nd_table[i], pci_bus, "e1000", NULL); ^ Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200228114649.12818-10-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-28hw: Make MachineClass::is_default a boolean typePhilippe Mathieu-Daudé
There's no good reason for it to be type int, change it to bool. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-3-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-02-25Merge tag 'patchew/20200219160953.13771-1-imammedo@redhat.com' of ↵Paolo Bonzini
https://github.com/patchew-project/qemu into HEAD This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory) and consolidates it around hostmem backend. It allows to * resolve conflicts between global -mem-prealloc and hostmem's "policy" option, fixing premature allocation before binding policy is applied * simplify complicated memory allocation routines which had to deal with 2 ways to allocate RAM. * reuse hostmem backends of a choice for main RAM without adding extra CLI options to duplicate hostmem features. A recent case was -mem-shared, to enable vhost-user on targets that don't support hostmem backends [1] (ex: s390) * move RAM allocation from individual boards into generic machine code and provide them with prepared MemoryRegion. * clean up deprecated NUMA features which were tied to the old API (see patches) - "numa: remove deprecated -mem-path fallback to anonymous RAM" - (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types" - (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes" Introduce a new machine.memory-backend property and wrapper code that aliases global -mem-path and -mem-alloc into automatically created hostmem backend properties (provided memory-backend was not set explicitly given by user). A bulk of trivial patches then follow to incrementally convert individual boards to using machine.memory-backend provided MemoryRegion. Board conversion typically involves: * providing MachineClass::default_ram_size and MachineClass::default_ram_id so generic code could create default backend if user didn't explicitly provide memory-backend or -m options * dropping memory_region_allocate_system_memory() call * using convenience MachineState::ram MemoryRegion, which points to MemoryRegion allocated by ram-memdev On top of that for some boards: * missing ram_size checks are added (typically it were boards with fixed ram size) * ram_size fixups are replaced by checks and hard errors, forcing user to provide correct "-m" values instead of ignoring it and continuing running. After all boards are converted, the old API is removed and memory allocation routines are cleaned up.
2020-02-19hppa: use memdev for RAMIgor Mammedov
memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200219160953.13771-42-imammedo@redhat.com>
2020-02-18hw/hppa/dino: Do not accept accesses to registers 0x818 and 0x82cPhilippe Mathieu-Daudé
Register 0x818 is documented as 'undefined', and register 0x82c is not documented. Refuse their access. Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200218063355.18577-5-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18hw/hppa/dino: Fix bitmask for the PCIROR registerPhilippe Mathieu-Daudé
Only 24 bits of the PCIROR register are documented (see pp. 37 of datasheet referenced in this file header). Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200218063355.18577-4-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 03:00:18 +0000