aboutsummaryrefslogtreecommitdiff
path: root/hw/hpet.c
AgeCommit message (Collapse)Author
2011-09-16Remove blanks before \n in output stringsStefan Weil
Those blanks violate the coding conventions, see scripts/checkpatch.pl. Blanks missing after colons in the changed lines were added. This patch does not try to fix tabs, long lines and other problems in the changed lines, therefore checkpatch.pl reports many violations. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-12hpet: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-02-21isa-bus: Remove bogus IRQ sharing checkJan Kiszka
Nothing prevented IRQ sharing on the ISA bus in principle. Not all boards supported this, neither each and every card nor driver and OS. Still, there existed valid IRQ sharing scenarios, (at least) two of them can also be found in QEMU: >2 PC UARTs and the PREP IDE buses. So remove this artificial restriction from our ISA model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-12hpet: make optionalBlue Swirl
Ignore failure with hpet device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-16Fix comparison which always returned falseStefan Weil
Comparing an 8 bit value with ~0 does not work as expected. Replace ~0 by UINT8_MAX in comparison and also in assignment (and fix coding style, too). Cc: Gleb Natapov <gleb@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: malc <av1474@comtv.ru>
2010-06-14pass info about hpets to seabios.]Gleb Natapov
Currently HPET ACPI table is created regardless of whether qemu actually created hpet device. This may confuse some guests that don't check that hpet is functional before using it. Solve this by passing info about hpets in qemu to seabios via fw config interface. Additional benefit is that seabios no longer uses hard coded hpet configuration. Proposed interface supports up to 8 hpets. This is the number defined by hpet spec. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-14hpet: Init capability register only onceJan Kiszka
The capability register is read-only from guest POV, so we do not need to update it on reset. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-13hpet: Add MSI supportJan Kiszka
This implements the HPET capability of routing IRQs to the front-side bus, aka MSI support. This feature can be enabled via the qdev property "msi" and is off by default. Note that switching it on can cause guests (at least Linux) to use the HPET as timer instead of the LAPIC. KVM users should recall that only the latter is currently available as fast in-kernel model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Make number of timers configurableJan Kiszka
One HPET block supports up to 32 timers. Allow to instantiate more than the recommended and implemented minimum of 3. The number is configured via the qdev property "timers". It is also saved/restored so that it need not match between migration peers. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Add support for level-triggered interruptsJan Kiszka
By implementing this feature we can also remove a nasty way to kill qemu (by trying to enable level-triggered hpet interrupts). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Drop static stateJan Kiszka
Instead of keeping a static reference around, pass the state to hpet_enabled and hpet_get_ticks. All callers now have it at hand. Will once allow to instantiate the HPET more than a single time. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet/rtc: Rework RTC IRQ replacement by HPETJan Kiszka
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push routing to IRQ8 completely into the HPET. This allows to turn hpet_in_legacy_mode() into a private function. Furthermore, this stops the RTC from clearing IRQ8 even if the HPET is in control. This patch comes with a side effect: The RTC timers will no longer be stoppend when there is no IRQ consumer, possibly causing a minor performance degration. But as the guest may want to redirect the RTC to the SCI in that mode, it should normally disable unused IRQ source anyway. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Start/stop timer when HPET_TN_ENABLE is modifiedJan Kiszka
We have to update the qemu timer when the per-timer enable bit is toggled, just like for HPET_CFG_ENABLE changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Convert to qdevJan Kiszka
Register the HPET as a sysbus device and create it that way. As it can route its IRQs to any ISA IRQ, we need to connect it to all 24 of them. Once converted to qdev, we can move reset handler and vmstate registration into its hands as well. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Move static timer field initializationJan Kiszka
Properly initialize HPETTimer::tn and HPETTimer::state once during hpet_init instead of (re-)writing them on every reset. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Silence warning on write to running main counterJan Kiszka
Setting the main counter while the HPET is enabled may not be a good idea of the guest, but it is supported and should, thus, not spam the host console with warnings. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Coding style cleanups and some refactoringsJan Kiszka
This moves the private HPET structures into the C module, simplifies some helper functions and fixes most coding style issues (biggest chunk was improper switch-case indention). No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet: Catch out-of-bounds timer accessJan Kiszka
Also prevent out-of-bounds write access to the timers but don't spam the host console if it triggers. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2009-11-07v3: don't call reset functions on cpu initializationGlauber Costa
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-05vmstate: remove const from pre_save() functionsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05vmstate: add version_id argument to post_loadJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-11vmstate: port hpet deviceJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11hpet: it is imposible that qemu_timer field is NULL at this pointJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27HPET fixes for reg writesBeth Kon
This patch addresses the problems found by Andriy Gapon: - The code was incorrectly overwriting the high order 32 bits of the timer and hpet config registers. This didn't show up in testing because linux and windows use hpet in legacy mode, where the high order 32 bits (advertising available interrupts) of the timer config register are ignored, and the high order 32 bits of the hpet config register are reserved and unused. - The mask for level-triggered interrupts was off by a bit. (hpet doesn't currently support level-triggered interrupts). In addition, I removed some unused #defines, and corrected the ioapic interrupt values advertised. I'd set this up early in hpet development and never went back to correct it, and no bugs resulted since linux and windows use hpet in legacy mode where available interrupts are ignored. Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Reset HPET config register on hpet_resetBeth Kon
Without this, after system reset, hpet does not detect transition from non-legacy to legacy mode. Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-17hpet: Fix emulation of HPET_TN_SETVAL (Jan Kiszka)aliguori
While Intel's spec is not that clear here, latest changes to Linux' HPET code (commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403, "x86: hpet: stop HPET_COUNTER when programming periodic mode") strongly suggest that HPET_TN_SETVAL rather means: Set _both_ the comparator value and register. With this patch applied, I'm again able to boot 2.6.30-rc kernels as they no longer panic like this (which was due to the comparator register remaining 0): ENABLING IO-APIC IRQs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 2) ... ....... failed. ...trying to set up timer as Virtual Wire IRQ... ..... failed. ...trying to set up timer as ExtINT IRQ... ..... failed :(. Kernel panic - not syncing: IO-APIC + timer doesn't work! [...] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7168 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16hpet config mask fixaurel32
I discovered a bug in the hpet code that caused Windows to boot without hpet. The config mask I was using was preventing the guest from placing the hpet into 32 bit mode. (Beth Kon) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6357 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel32
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18Remove trailing spaces introduced by commit 6081aurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6085 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18Fix warnings introduced by commit 6081aurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6084 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-17Add HPET emulation to qemu (Beth Kon)aliguori
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet provides a more finely granular clocksource than otherwise available on PC. This means that latency-dependent applications (e.g. multimedia) will generally be smoother when using the HPET. Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 18:10:51 +0000