aboutsummaryrefslogtreecommitdiff
path: root/hw/gpio
AgeCommit message (Collapse)Author
2022-10-17hw/gpio/meson: Introduce dedicated config switch for hw/gpio/mpc8xxxBernhard Beschow
Having a dedicated config switch makes dependency handling cleaner. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221003203142.24355-3-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-14hw/gpio/aspeed: Don't let guests modify input pinsPeter Delevoryas
Up until now, guests could modify input pins by overwriting the data value register. The guest OS should only be allowed to modify output pin values, and the QOM property setter should only be permitted to modify input pins. This change also updates the gpio input pin test to match this expectation. Andrew suggested this particularly refactoring here: https://lore.kernel.org/qemu-devel/23523aa1-ba81-412b-92cc-8174faba3612@www.fastmail.com/ Suggested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Peter Delevoryas <peter@pjd.dev> Fixes: 4b7f956862dc ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220712023219.41065-3-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw/gpio: replace HWADDR_PRIx with PRIx64Jamin Lin
1. replace HWADDR_PRIx with PRIx64 2. fix indent issue Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220525053444.27228-5-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw/gpio support GPIO index mode for write operation.Jamin Lin
It did not support GPIO index mode for read operation. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220525053444.27228-4-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw/gpio: Add ASPEED GPIO model for AST1030Jamin Lin
AST1030 integrates one set of Parallel GPIO Controller with maximum 151 control pins, which are 21 groups (A~U, exclude pin: M6 M7 Q5 Q6 Q7 R0 R1 R4 R5 R6 R7 S0 S3 S4 S5 S6 S7 ) and the group T and U are input only. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220525053444.27228-3-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-25hw/gpio Add GPIO read/write trace event.Jamin Lin
Add GPIO read/write trace event for aspeed model. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220525053444.27228-2-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02hw/gpio/aspeed_gpio: Fix QOM pin propertyPeter Delevoryas
I was setting gpioV4-7 to "1110" using the QOM pin property handler and noticed that lowering gpioV7 was inadvertently lowering gpioV4-6 too. (qemu) qom-set /machine/soc/gpio gpioV4 true (qemu) qom-set /machine/soc/gpio gpioV5 true (qemu) qom-set /machine/soc/gpio gpioV6 true (qemu) qom-get /machine/soc/gpio gpioV4 true (qemu) qom-set /machine/soc/gpio gpioV7 false (qemu) qom-get /machine/soc/gpio gpioV4 false An expression in aspeed_gpio_set_pin_level was using a logical NOT operator instead of a bitwise NOT operator: value &= !pin_mask; The original author probably intended to make a bitwise NOT expression "~", but mistakenly used a logical NOT operator "!" instead. Some programming languages like Rust use "!" for both purposes. Fixes: 4b7f956862dc ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220502080827.244815-1-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-08hw: aspeed_gpio: Cleanup stray semicolon after switchAndrew Jeffery
Not sure how that got there. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20220207150409.358888-2-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-21exec/exec-all: Move 'qemu/log.h' include in units requiring itPhilippe Mathieu-Daudé
Many files use "qemu/log.h" declarations but neglect to include it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is a core component and shouldn't be used that way. Move the "qemu/log.h" inclusion locally to each unit requiring it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220207082756.82600-10-f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-01-28Remove unnecessary minimum_version_id_old fieldsPeter Maydell
The migration code will not look at a VMStateDescription's minimum_version_id_old field unless that VMSD has set the load_state_old field to something non-NULL. (The purpose of minimum_version_id_old is to specify what migration version is needed for the code in the function pointed to by load_state_old to be able to handle it on incoming migration.) We have exactly one VMSD which still has a load_state_old, in the PPC CPU; every other VMSD which sets minimum_version_id_old is doing so unnecessarily. Delete all the unnecessary ones. Commit created with: sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old') with the one legitimate use then hand-edited back in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- It missed vmstate_ppc_cpu.
2021-10-12hw: aspeed_gpio: Fix GPIO array indexingPeter Delevoryas
The gpio array is declared as a dense array: qemu_irq gpios[ASPEED_GPIO_NR_PINS]; (AST2500 has 228, AST2400 has 216, AST2600 has 208) However, this array is used like a matrix of GPIO sets (e.g. gpio[NR_SETS][NR_PINS_PER_SET] = gpio[8][32]) size_t offset = set * GPIOS_PER_SET + gpio; qemu_set_irq(s->gpios[offset], !!(new & mask)); This can result in an out-of-bounds access to "s->gpios" because the gpio sets do _not_ have the same length. Some of the groups (e.g. GPIOAB) only have 4 pins. 228 != 8 * 32 == 256. To fix this, I converted the gpio array from dense to sparse, to that match both the hardware layout and this existing indexing code. Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Signed-off-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20211008033501.934729-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12hw: aspeed_gpio: Fix pin I/O type declarationsPeter Delevoryas
Some of the pin declarations in the Aspeed GPIO module were incorrect, probably because of confusion over which bits in the input and output uint32_t's correspond to which groups in the label array. Since the uint32_t literals are in big endian, it's sort of the opposite of what would be intuitive. The least significant bit in ast2500_set_props[6] corresponds to GPIOY0, not GPIOAB7. GPIOxx indicates input and output capabilities, GPIxx indicates only input, GPOxx indicates only output. AST2500: - Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct. - Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7. - Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only have been GPIOAB0..GPIOAB3. AST2600: - GPIOT0..GPIOT7 should have been GPIT0..GPIT7. - GPIOU0..GPIOU7 should have been GPIU0..GPIU7. - GPIW0..GPIW7 should have been GPIOW0..GPIOW7. - GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled. Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Message-Id: <20210928032456.3192603-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-30qbus: Rename qbus_create_inplace() to qbus_init()Peter Maydell
Rename qbus_create_inplace() to qbus_init(); this is more in line with our usual naming convention for functions that in-place initialize objects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
2021-09-20hw: aspeed_gpio: Clarify GPIO controller nameJoel Stanley
There are two GPIO controllers in the ast2600; one is 3.3V and the other is 1.8V. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210713065854.134634-4-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20hw: aspeed_gpio: Simplify 1.8V definesJoel Stanley
There's no need to define the registers relative to the 0x800 offset where the controller is mapped, as the device is instantiated as it's own model at the correct memory address. Simplify the defines and remove the offset to save future confusion. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210713065854.134634-3-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-07-27hw: aspeed_gpio: Fix memory sizeJoel Stanley
The macro used to calculate the maximum memory size of the MMIO region had a mistake, causing all GPIO models to create a mapping of 0x9D8. The intent was to have it be 0x9D8 - 0x800. This extra size doesn't matter on ast2400 and ast2500, which have a 4KB region set aside for the GPIO controller. On the ast2600 the 3.3V and 1.8V GPIO controllers are 2KB apart, so the regions would overlap. Worse was the 1.8V controller would map over the top of the following peripheral, which happens to be the RTC. The mmio region used by each device is a maximum of 2KB, so avoid the calculations and hard code this as the maximum. Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20210713065854.134634-2-joel@jms.id.au [PMM: fix autocorrect error in commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09hw/gpio/pl061: Document a shortcoming in our implementationPeter Maydell
The Luminary PL061s in the Stellaris LM3S9695 don't all have the same reset value for GPIOPUR. We can get away with not letting the board configure the PUR reset value because we don't actually wire anything up to the lines which should reset to pull-up. Add a comment noting this omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-09hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on resetPeter Maydell
The PL061 comes out of reset with all its lines configured as input, which means they might need to be pulled to 0 or 1 depending on the 'pullups' and 'pulldowns' properties. Currently we do not assert these lines on reset; they will only be set whenever the guest first touches a register that triggers a call to pl061_update(). Convert the device to three-phase reset so we have a place where we can safely call qemu_set_irq() to set the floating lines to their correct values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Make pullup/pulldown of outputs configurablePeter Maydell
The PL061 GPIO does not itself include pullup or pulldown resistors to set the value of a GPIO line treated as an output when it is configured as an input (ie when the PL061 itself is not driving it). In real hardware it is up to the board to add suitable pullups or pulldowns. Currently our implementation hardwires this to "outputs pulled high", which is correct for some boards (eg the realview ones: see figure 3-29 in the "RealView Platform Baseboard for ARM926EJ-S User Guide" DUI0224I), but wrong for others. In particular, the wiring in the 'virt' board and the gpio-pwr device assumes that wires should be pulled low, because otherwise the pull-to-high will trigger a shutdown or reset action. (The only reason this doesn't happen immediately on startup is due to another bug in the PL061, where we don't assert the GPIOs to the correct value on reset, but will do so as soon as the guest touches a register and pl061_update() gets called.) Add properties to the pl061 so the board can configure whether it wants GPIO lines to have pullup, pulldown, or neither. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registersPeter Maydell
The Luminary variant of the PL061 has registers GPIOPUR and GPIOPDR which lets the guest configure whether the GPIO lines are pull-up, pull-down, or truly floating. Instead of assuming all lines are pulled high, honour the PUR and PDR registers. For the plain PL061, continue to assume that lines have an external pull-up resistor, as we did before. The stellaris board actually relies on this behaviour -- the CD line of the ssd0323 display device is connected to GPIO output C7, and it is only because of a different bug which we're about to fix that we weren't incorrectly driving this line high on reset and putting the ssd0323 into data mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Document the interface of this devicePeter Maydell
Add a comment documenting the "QEMU interface" of this device: which MMIO regions, IRQ lines, GPIO lines, etc it exposes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Add tracepoints for register read and writePeter Maydell
Add tracepoints for reads and writes to the PL061 registers. This requires restructuring pl061_read() to only return after the tracepoint, rather than having lots of early-returns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Clean up read/write offset handling logicPeter Maydell
Currently the pl061_read() and pl061_write() functions handle offsets using a combination of three if() statements and a switch(). Clean this up to use just a switch, using case ranges. This requires that instead of catching accesses to the luminary-only registers on a stock PL061 via a check on s->rsvd_start we use an "is this luminary?" check in the cases for each luminary-only register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Convert DPRINTF to tracepointsPeter Maydell
Convert the use of the DPRINTF debug macro in the PL061 model to use tracepoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-02hw/gpio/gpio_pwr: use shutdown function for rebootMaxim Uvarov
qemu has 2 type of functions: shutdown and reboot. Shutdown function has to be used for machine shutdown. Otherwise we cause a reset with a bogus "cause" value, when we intended a shutdown. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210625111842.3790-3-maxim.uvarov@linaro.org [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-05misc: Correct relative include pathPhilippe Mathieu-Daudé
Headers should be included from the 'include/' directory, not from the root directory. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210516205034.694788-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-17Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Pull request trivial-branch 20210515 # gpg: Signature made Sat 15 May 2021 11:02:59 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: target/avr: Ignore unimplemented WDR opcode hw/avr/atmega.c: use the avr51 cpu for atmega1280 target/sh4: Return error if CPUClass::get_phys_page_debug() fails multi-process: Avoid logical AND of mutually exclusive tests hw/pci-host: Do not build gpex-acpi.c if GPEX is not selected hw/mem/meson: Fix linking sparse-mem device with fuzzer cutils: fix memory leak in get_relocated_path() hw/rtc/mc146818rtc: Convert to 3-phase reset (Resettable interface) hw/timer/etraxfs_timer: Convert to 3-phase reset (Resettable interface) hw/gpio/aspeed: spelling fix (addtional) qapi: spelling fix (addtional) virtiofsd: Fix check of chown()'s return value virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument backends/tpm: Replace qemu_mutex_lock calls with QEMU_LOCK_GUARD Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-13hw/gpio/aspeed: spelling fix (addtional)Michael Tokarev
Fixes: 36d737ee82b2972167e97901c5271ba3f904ba71 Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210508093615.411920-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-01-29hw: gpio: implement gpio-pwr driver for qemu reset/poweroffMaxim Uvarov
Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-27hw/gpio: Add GPIO model for Nuvoton NPCM7xxHavard Skinnemoen
The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-22Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial patches 20200919 # gpg: Signature made Sat 19 Sep 2020 19:43:35 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: contrib/: fix some comment spelling errors qapi/: fix some comment spelling errors disas/: fix some comment spelling errors linux-user/: fix some comment spelling errors util/: fix some comment spelling errors scripts/: fix some comment spelling errors docs/: fix some comment spelling errors migration/: fix some comment spelling errors qemu/: fix some comment spelling errors scripts/git.orderfile: Display meson files along with buildsys ones hw/timer/hpet: Fix debug format strings hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw meson: remove empty else and duplicated gio deps manual: escape backslashes in "parsed-literal" blocks ui/spice-input: Remove superfluous forward declaration hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition hw/gpio/max7310: Remove impossible check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16hw/gpio/max7310: Remove impossible checkPhilippe Mathieu-Daudé
The max7310_gpio_set() handler is static and only used by qdev_init_gpio_in, initialized with 8 IRQs. The 'line' argument can not be out of the [0-8[ range. Replace the dead code by an assertion. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200910072325.439344-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-09hw/riscv: Move sifive_gpio model to hw/gpioBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)Philippe Mathieu-Daudé
Replace disabled printf() by qemu_log_mask(UNIMP). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200901104234.92159-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)Philippe Mathieu-Daudé
Replace fprintf() by qemu_log_mask(LOG_GUEST_ERROR). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200901104234.92159-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-01hw: Remove superfluous breaksLiao Pingfang
Remove superfluous breaks, as there is a "return" before them. Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: convert hw/gpioMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qom: Don't handle impossible object_property_get_link() failureMarkus Armbruster
Don't handle object_property_get_link() failure that can't happen unless the programmer screwed up, pass &error_abort. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-03hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accessesPeter Maydell
Instead of logging guest accesses to invalid register offsets in this device using zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Since this was the only use of the zaurus_printf() macro outside spitz.c, we can move the definition of that macro from sharpsl.h to spitz.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-14-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 22:06:14 +0000