aboutsummaryrefslogtreecommitdiff
path: root/hw/fdc.c
AgeCommit message (Collapse)Author
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-14fdc: remove last usage of FD_STATE_SEEKHervé Poussineau
Replace it by directly setting FD_SR0_SEEK if required Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: fix typo in zero constantHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: remove double affectation of FD_MSR_CMDBUSY flagHervé Poussineau
FD_MSR_CMDBUSY flag is already set in fdctrl_write_data(), just before calling the command handler (fdctrl_start_transfer() here). Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: implement VERIFY commandHervé Poussineau
VERIFY command is like a READ command, except that read data is not transfered by DMA. As DMA engine is not used, so we have to start data transfer ourselves. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: fix false FD_SR0_SEEKHervé Poussineau
Do not always set FD_SR0_SEEK, as callers already set it if needed. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: fix FD_SR0_SEEK for initial seek on DMA transfersHervé Poussineau
fdctrl_start_transfer() used to set FD_SR0_SEEK no matter if there actually was a seek or not. This is obviously wrong. fdctrl_start_transfer() has this information because it performs the initial seek itself. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfersHervé Poussineau
On non-DMA transfers, fdctrl_stop_transfer() used to set FD_SR0_SEEK no matter if there actually was a seek or not. This is obviously wrong. fdctrl_seek_to_next_sect() has this information because it performs the seek itself. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: use status0 field instead of a local variableHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14fdc: Remove status0 parameter from fdctrl_set_fifo()Kevin Wolf
It decided whether an interrupt is triggered. Only one caller made use of this functionality, so move the code there. In this one caller, the interrupt must actually be triggered unconditionally, like it was before commit 2fee0088. For example, a successful read without an implied seek can result in st0 = 0, but still triggers the interrupt. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Hervé Poussineau <hpoussin@reactos.org>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05cleanup useless return sentenceAmos Kong
This patch cleans up return sentences in the end of void functions. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-28iostatus: move BlockdevOnError declaration to QAPIPaolo Bonzini
This will let block-stream reuse the enum. Places that used the enums are renamed accordingly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17fdc: fix relative seekPavel Hrdina
Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17fdc: Move floppy geometry guessing back from block.cMarkus Armbruster
Commit 5bbdbb46 moved it to block.c because "other geometry guessing functions already reside in block.c". Device-specific functionality should be kept in device code, not the block layer. Move it back. Disk geometry guessing is still in block.c. To be moved out in a later patch series. Bonus: the floppy type used in pc_cmos_init() now obviously matches the one in the FDrive. Before, we relied on bdrv_get_floppy_geometry_hint() picking the same type both in fd_revalidate() and in pc_cmos_init(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09fdc: Drop broken code for user-defined floppy geometryMarkus Armbruster
bdrv_get_floppy_geometry_hint() fails to store through its parameter drive when bs has a geometry hint. Makes fd_revalidate() assign random crap to drv->drive. Has been broken that way for ages. Harmless, because: * The only way to set a geometry hint is -drive if=none,cyls=... Since commit c219331e, probably unintentional. * The only use of drv->drive is as argument to another bdrv_get_floppy_geometry_hint(). Which doesn't use it, since the geometry hint is still there. Drop the broken code, ignore -drive parameter cyls, heads and secs for floppies even with if=none, just like before commit c219331e. Matches -help, which explains cyls, heads, secs as "hard disk physical geometry". Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09fdc: fix interrupt handlingPavel Hrdina
If you call the SENSE INTERRUPT STATUS command while there is no interrupt waiting you get as result unknown command. Fixed status0 register handling for read/write/format commands. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09fdc: rewrite seek and DSKCHG bit handlingPavel Hrdina
This bit is cleared on every successful seek to a different track (cylinder). The seek is also called on revalidate or on read/write/format commands which also clear the DSKCHG bit. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-21fdc: use LOG_UNIMP loggingBlue Swirl
Convert uses of FLOPPY_ERROR to either FLOPPY_DPRINTF (for implemented cases) or to use LOG_UNIMP (unimplemented). Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-15fdc: fix implied seek while there is no media in drivePavel Hrdina
The Windows uses 'READ' command at the start of an instalation without checking the 'dir' register. We have to abort the transfer with an abnormal termination if there is no media in the drive. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15Un-inline fdctrl_init_isa()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25fdc: fix media detectionPavel Hrdina
We have to set up 'media_changed' after guest start so floppy driver could detect that there is no media in drive. For this purpose we call 'fdctrl_change_cb' instead of 'fd_revalidate' in 'fdctrl_connect_drives'. 'fd_revalidate' is called inside 'fdctrl_change_cb'. We still have to set default drive geometry in 'fd_revalidate' even if there is no media in drive. When you try to open (windows) or mount (linux) floppy the driver tries to seek on track 1. Linux guest stuck in loop then kernel crashes and windows guest prints error message. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-07fdc: simplify media change handlingHervé Poussineau
This also (partly) fixes IBM OS/2 Warp 4.0 floppy installation, where not all floppies have the same format (2x80x18 for the first ones, 2x80x23 for the next ones). Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-28fdc: Parametrize ISA base, IRQ and DMAHervé Poussineau
Keep the PC values as defaults but allow to override them for PReP. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-02-29fdc: DIR (Digital Input Register) should return status of current drive...Hervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: fix seek command, which shouldn't check tracksHervé Poussineau
The seek command just sends step pulses to the drive and doesn't care if there is a medium inserted of if it is banging the head against the drive. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: check if media rate is correct before doing any transferHervé Poussineau
The programmed rate has to be the same as the required rate for the floppy format ; if that's not the case, the transfer should abort. This check can be disabled by using the 'check_media_rate' property. Save media rate value only if media rate check is enabled. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: add a 'check media rate' property. Not used yetHervé Poussineau
Set it to true for current Qemu versions, and false for previous ones Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29block: add a transfer rate for floppy typesHervé Poussineau
Floppies must be read at a specific transfer rate, depending of its own format. Update floppy description table to include required transfer rate. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: add CCR (Configuration Control Register) write registerHervé Poussineau
DIR and CCR registers share the same address ; DIR is read-only while CCR is write-only CCR register is used to change media transfer rate, which will be checked in following changes. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: handle read-only floppies (abort early on write commands)Hervé Poussineau
A real floppy doesn't attempt to write to read-only media either. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: most control commands do not generate interruptsHervé Poussineau
In fact, only three control commands generate an interrupt: read_id, recalibrate and seek Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: set busy bit when starting a commandHervé Poussineau
This bit must be active while a command is currently executed. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: take side count into accountHervé Poussineau
Floppies can be simple or double-sided. However, current code was only taking the common case into account (ie 2 sides). This repairs single-sided floppies, which where totally broken before this patch : for track > 0, wrong sector number was calculated, and data was read/written at wrong place on underlying device. Fortunately, only some 360 kB floppies are single-sided, so this bug was probably not seen much. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27isa: pic: convert to QEMU Object ModelAnthony Liguori
This converts two devices at once because PIC subclasses ISA and converting subclasses independently is extremely hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06Convert source files to UTF-8 encodingStefan Weil
Most QEMU files either are pure ASCII or use UTF-8. Convert some files which still used ISO-8859-1 to UTF-8. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-28sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-24fdc: convert to memory APIAvi Kivity
FIXME: instance ID for migration Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-21pc: Fix floppy drives with if=noneKevin Wolf
Commit 63ffb564 broke floppy devices specified on the command line like -drive file=...,if=none,id=floppy -global isa-fdc.driveA=floppy because it relies on drive_get() which works only with -fda/-drive if=floppy. This patch resembles what we're already doing for IDE, i.e. remember the floppy device that was created and use that to extract the BlockDriverStates where needed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-10-21fdc: Fix floppy port I/OKevin Wolf
The floppy device was broken by commit 212ec7ba (fdc: Convert to isa_register_portio_list). While the old interface provided the port number relative to the floppy drive's io_base, the new one provides the real port number, so we need to apply a bitmask now to get the register number. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11fdc: Convert to isa_register_portio_listRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25fdc: Convert isabus_fdc_init1 to MemoryRegionRichard Henderson
This requires some amount of hoop-jumping, so that we don't inadvertently claim port 0x3f6, which is used by ISA IDE. The sysbus initialization path is as yet unconverted. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-12block: New change_media_cb() parameter loadMarkus Armbruster
To let device models distinguish between eject and load. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop BlockDriverState member removableMarkus Armbruster
It's a confused mess (see previous commit). No users remain. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06fdc: Make media change detection more robustMarkus Armbruster
fdctrl_change_cb() gets called on a virtual media change via monitor. It would be nice if host device block drivers called it on physical media change, but they don't. bdrv_media_changed() lets you poll for media change, but it returns "don't know" except with block driver "host_floppy". FDrive member media_changed gets set on device initialization and by fdctrl_change_cb(), and cleared by fdctrl_media_changed(). Thus, it's set on first entry to fdctrl_media_changed() since device initialization or virtual media change. fdctrl_media_changed() ignores media_changed unless bdrv_media_changed() returns "don't know". If we change media via monitor (setting media_changed), and the new media's block driver returns 0, we lose. Fortunately, "host_floppy" always returns 1 on first call. Brittle. Clean it up not to rely on it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 21:36:55 +0000