Age | Commit message (Collapse) | Author |
|
isa-fdc is completely qdev-ified with this patch applied, all
configuration uses properties.
sysbus-fdc needs dma_channel config fixed. There is only one user
(mips_jazz) which uses dma channel 0. Can anyone knowing this
platform suggest how to deal with it? Is hardcoding fine?
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: malc <av1474@comtv.ru>
|
|
We can't move fifo back to an embeded array because it needs to be aligned
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
isa-bus owns the isa irqs now, so it can hand them out directly.
There is no need for the separate isa_connect_irqs step, drop it.
Also hard-code isa interrupts which can't be configured anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Lot of ISA devices work at fixed addresses, so having iobase
as bus property doesn't make much sense. Devices which can
have different iobases will get a device property.
Also simply hard-code stuff which can't be configured anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Now with isa-bus maintaining the isa irqs we can move the
isa_connect_irq() calls into isa_create_simple().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Changes:
(1) make isa-bus maintain isa irqs, complain when allocating
already taken irqs.
(2) note that (1) works only for isa devices converted to qdev
already (floppy and ps2/kbd/mouse right now), so more work
is needed to make this really useful.
(3) split floppy init into isa and sysbus versions.
(4) add sysbus->isa bridge & fix -M isapc breakage.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
On some Sparc32 machines, fdc is located above 4G limit, so uint32_t is not
appropriate type for io_base.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This patch is a major overhaul of the device properties. The properties
are saved directly in the device state struct now, the linked list of
property values is gone.
Advantages:
* We don't have to maintain the list with the property values.
* The value in the property list and the value actually used by
the device can't go out of sync any more (used to happen for
the pci.devfn == -1 case) because there is only one place where
the value is stored.
* A record describing the property is required now, you can't set
random properties any more.
There are bus-specific and device-specific properties. The former
should be used for properties common to all bus drivers. Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.
Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties. A few common property
types have PropertyInfos defined in qdev-properties.c. Drivers are free
to implement their own very special property parsers if needed.
Properties can have default values. If unset they are zero-filled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.
Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Original text below.
Attached is a patch that changes how the emulated floppy controller replies to Sense Interrupt Status commands immediately after a controller reset. The specs state that after a Reset the 82078 goes into polling mode which needs four Sense Interrupt Status commands to be issued afterwards to clear the status of each drive. Currently we always respond to Sense Interrupt Status with a SEEK END instead of POLLING. This causes a problem with the SCO Openserver installer which is expects a POLLING state after reset. This patch returns a POLLING status for four Sense Interrupt Status requests immediately after a controller reset. This approach mirrors the way Bochs handles this situation. With the attached patch applied Openserver gets further when trying to load storage drivers from the floppy disk (blocked by another issue, patch on its way). I have successfully tested the floppy drive on the following OSs after applying this patch: Windows 98, Windows XP SP2, Linux x86 (SysRescCD 1.1.3 and Ubuntu 8.10).
Justin
Changelog:
Properly handle Sense Interrupt Status after FDC Reset
Signed-off-by: Justin Chevrier <theburner1@yahoo.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6416 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Change from v1:
Avoid changing the existing coding style in certain files.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5853 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
In floppy controller, transfer data len is not correctly calculated.
We should read up to the last sector specified by the caller, and not up to
the last sector of the floppy.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4294 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
In floppy controller, programming PIO writes which are more than one sector
long leads to a buffer overflow of the fdtrl->fifo[] array.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4293 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Replaces access to cur_drv field by macros.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4290 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Supports up to 4 floppy drives if MAX_FD is set to 4.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4289 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Replaces bootsel field by the whole tdr register. It may be easier if we want to later add support for tapes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4288 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Removes useless fields in fdrive_t structure.
- Adds a message when bdrv_read/bdrv_write calls fail.
- Rename int_status to status0.
- Replace some constants by value names.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4287 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Stores controller state in MSR register instead of internal state field. This simplifies the fdctrl_read_main_status() function, which may be called in some tight loops.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4286 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Better handling of DOR register. DOR register drives external motors, but it not limited to existing drives.
- Use FD_DOR_nRESET flag instead of internal FD_CTRL_RESET flag.
- Support writing to DOR register even in reset mode (as said in specification)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4285 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Handles correctly FD_MSR_NONDMA/FD_DOR_NONDMA flags, and uses them when possible. Fixes a problem with SPECIFY command.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4284 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Fixes status A and status B registers. It removes one Sun4m mutation. Also removes the internal FD_CTRL_INTR flag.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4283 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Extract seeking to next sector handling in a function. Add a sector seek in PIO read and write modes
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4282 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
- Adds a command lookup table, as suggested by Fabrice at http://lists.gnu.org/archive/html/qemu-devel/2008-04/msg00143.html
- This also moves initialization functions at the bottom of the file to prevent multiple forward declarations.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4281 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4174 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4096 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4000 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3881 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3848 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3825 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3815 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3535 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
nb_sectors instead of len in bytes but the fdc driver has never been fixed.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3532 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3531 c046a42c-6fe2-441c-8c8c-71466251a162
|