aboutsummaryrefslogtreecommitdiff
path: root/hw/esp.c
AgeCommit message (Collapse)Author
2009-10-24esp: convert to reset + vmsdBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch scsi bus to inplace allocation.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-19ESP: convert to VMStateBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09qdev/scsi: add scsi bus support to qdev, convert drivers.Gerd Hoffmann
* Add SCSIBus. * Add SCSIDeviceInfo, move device callbacks here. * add qdev/scsi helper functions. * convert drivers. Adding scsi disks via -device works now, i.e. you can do: -drive id=sda,if=none,... -device lsi -device scsi-disk,drive=sda legacy command lines (-drive if=scsi,...) continue to work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-05esp: handle "select without attention"Artyom Tarasenko
Up to now "select without attention" was handled the same way as "select with attention". According to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt select without ATN sends the CDB (Command Descriptor Block) directly, whereas select with ATN sends one message phase byte followed by 6, 10, or 12 command phase bytes. The attached patch implements the behaviour described above. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> [blauwirbel@gmail.com: cleaned up formatting] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-31esp (sparc32) Extra scsi data.Artyom Tarasenko
> ESP: Message Accepted (12) > ESP: Transfer status (sense=0) > ESP: read reg[5]: 0x20 > ESP: read reg[4]: 0x07 > ESP: read reg[7]: 0x02 > Extra scsi data. Fatal error. It looks like "Message Accepted" shouldn't write a response. At least ESP_RFLAGS must definetely be 0. With the following fix OBP goes one step further: Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-22ESP: implement Transfer PadBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-22ESP: Implement select without ATN, fix commentsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08Sparc32: move sparc32_dma init to sun4m.cBlue Swirl
Also connect ESP and Lance reset signals to DMA. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31esp: fix interrupt register readBlue Swirl
Read of interrupt register should clear it and also sequence step and status. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16qdev: rework device properties.Gerd Hoffmann
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-17Don't set IRQs on device reset and loadvm/savevmBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-26Remove qdev irq sink handlingPaul Brook
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14ESP SCSI qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-02Remove address maskingblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5853 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-30Fix ICCS command (Herve Poussineau)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5818 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-29Fix 'enable selection' command (esp_4_ensel.diff)blueswir1
Indicate success after 'enable selection' command Signed-off-by: Herve Poussineau <hpoussin@reactos.org> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5814 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-29Fix command len detection (esp_3_cmdlen.diff)blueswir1
When command is not DMA, TCMID and TCLO registers are not filled. Use command buffer len instead Signed-off-by: Herve Poussineau <hpoussin@reactos.org> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5813 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-29Fix configuration 2 register (esp_2_cfg2.diff):blueswir1
According to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt, "Any bit pattern written to this register may be read back and should be identical" Signed-off-by: Herve Poussineau <hpoussin@reactos.org> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5812 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-29Misc fixes (Herve Poussineau)blueswir1
- Fix internal fifo size (16 bytes), according to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt - Fix values of STAT_MI and STAT_MO - Give a scsi ID to adapter, and prevent this ID to be used by devices - Prevent fifo overrun in esp_mem_writeb - Add a ESP_ERROR macro, and use it where appropriate git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5811 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-02Resurrect the safe part of r5274blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5401 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-02Sun ss20 OBP does 32bit register access to esp (Robert Reif)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5394 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-25Revert r5274 which breaks savevm/loadvmblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5321 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-20Add signed versions of save/load functionsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5274 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-25Suppress OpenBSD warning messages for leftover fifo bytesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4791 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-01Fix compilation warningblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4638 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-10Fix compiler warningsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4404 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-24Fix irq handling (Hervé Poussineau)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4245 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-09ESP: Add it_shift parameter (Hervé Poussineau)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4186 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-02Let ESP SCSI adapter to be usable outside sun4m (Herv�oussineau)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4007 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-01 Register only valid register access widthsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3881 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-24Real SCSI device passthrough (v4), by Laurent Vivier.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3851 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-10SCSI cleanup, by Laurent Vivier.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3797 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-02Add -drive parameter, by Laurent Vivier.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-01 Name the magic constants, wrap long linesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3751 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-06 More detabificationblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3338 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-08-16 Use qemu_irq for a reset signal between DMA and ESP/Lanceblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3120 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 17:06:49 +0000