aboutsummaryrefslogtreecommitdiff
path: root/hw/escc.c
AgeCommit message (Collapse)Author
2011-08-22char: qemu_chr_ioctl() -> qemu_chr_fe_ioctl()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22char: rename qemu_chr_write() -> qemu_chr_fe_write()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-21escc: replace DPRINTFs with tracepointsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21escc: avoid structure holes spotted by paholeBlue Swirl
Edited report from pahole on amd64 host: struct ChannelState { ... ChnType type; /* 32 4 */ /* XXX 4 bytes hole, try to pack */ ... uint8_t rregs[16]; /* 66 16 */ /* XXX 2 bytes hole, try to pack */ ... /* size: 392, cachelines: 7 */ /* sum members: 382, holes: 2, sum holes: 6 */ /* padding: 4 */ /* last cacheline: 8 bytes */ }; /* definitions: 1 */ Fix by rearranging the structure to avoid padding. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-08ppc: convert to memory APIAvi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-01-29escc: fix interrupt flagsAurelien Jarno
Recent PowerPC kernel end up in kernel panic during boot in -nographic mode. In this mode the second serial port is used as the udbg console, and thus a few characters are sent on this port. This activates the tx interrupt flag, and later choke the Linux kernel, as it was not expecting such a flag to be set. The problem here comes from the fact that contrary to most devices the interrupt flags are only set if the interrupt is enabled. Quoting the datasheet: "If the corresponding IE bit is not set, the IP for that source of interrupt will never be set." This patch fixes that by enabling the interrupt flag only when the corresponding interrupt is enabled. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15sparc escc IUS improvements (SunOS 4.1.4 fix)Artyom Tarasenko
According to scc_escc_um.pdf: - Reset Highest IUS must update irq status to allow processing of the next priority interrupt. - rx interrupt has always higher priority than tx on same channel The documentation only explicitly says that Reset Highest IUS command (0x38) clears IUS bits, not that it clears the corresponding interrupt too, so don't clear interrupts on this command. The patch allows SunOS 4.1.4 to use the serial ports Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-07escc: don't use reserved _t suffixBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-07sparc32 (mostly): remove unneeded calls to device resetBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-24escc: add chipset docsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-24escc: convert to VMState, vmsd and resetBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-30escc: fix another coding style nitMichael S. Tsirkin
Fix another place with =- to be "= -". to avoid confusion with old-style "-=" (which we also have, and needs to be fixed). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-30escc: fix coding style nitMichael S. Tsirkin
Put space between = and - assigning a negative number to avoid confusion with old-style "-=" (which we also have, and needs to be fixed). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-16escc: fix IRQ routing, broken by 6c319c82223a1766c5d64a20051e5c6ab7b53951Aurelien Jarno
The logic of Zilog makes channel B the first device and channel A the second one. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-13Unbreak Sparc32 and PPCBlue Swirl
Convert qdev ptr type to chr, allow a NULL pointer. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-10qdev/prop: convert escc.c to helper macros.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-17Sparc32: fix escc devices broken by ee6847d19be16c789b8bd4e553b7cd6701ba1245Blue Swirl
The logic of Zilog makes channel B the first device and channel A the second one. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16qdev: rework device properties.Gerd Hoffmann
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-15Sparc32/PPC: convert escc to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14escc: allow one IRQ per serial channelaurel32
The Z85C30 on the PowerMAC machines have one interrupt per serial channel, while the Sparc machines have only one for both. Allow the emulated device to use one IRQ per channel. Patch by Laurent Vivier. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6295 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13ESCC: swap the two CharDriverState argumentsaurel32
Swap the two CharDriverState arguments so that the first argument corresponds to the channel A and the second argument to the channel B. Modify hw/sun4m.c accordingly. This fixes the order of the serial ports on the PPC machines. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6284 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-12Rename slavio_serial functions to escc, add clock rate and it_shift parametersblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6270 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-12Rename slavio_serial to esccblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6269 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 11:54:50 +0000