aboutsummaryrefslogtreecommitdiff
path: root/hw/e1000.c
AgeCommit message (Collapse)Author
2010-09-20e1000: Pad short frames to minimum size (60 bytes)Stefan Hajnoczi
The OpenIndiana (Solaris) e1000g driver drops frames that are too long or too short. It expects to receive frames of at least the Ethernet minimum size. ARP requests in particular are small and will be dropped if they are not padded appropriately, preventing a Solaris VM from becoming visible on the network. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-06qemu: e1000 fix TOR mathMichael S. Tsirkin
Patch b0b900070c7cb29bbefb732ec00397abe5de6d73 made TOR valuer incorrect: the spec says it should always include the CRC field. No one seems to use this field, but better to stick to spec. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-26Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-07-22e1000: Fix wrong microwire EEPROM state initializationIzumi Tsutsui
This change fixes initialization of e1000's microwire EEPROM internal state values so that qemu's e1000 emulation works on NetBSD, which doesn't use Intel's em driver but has its own wm driver for the Intel i8254x Gigabit Ethernet. Previously set_eecd() function in e1000.c clears EEPROM internal state values on SK rising edge during CS==L, but according to FM93C06 EEPROM (which is MicroWire compatible) data sheet, EEPROM internal status should be cleared on CS rise edge regardless of SK input: "... a rising edge on this (CS) signal is required to reset the internal state-machine to accept a new cycle .." and nothing should be changed during CS (chip select) is inactive. Intel's em driver seems to explicitly raise SK output after CS is negated in em_standby_eeprom() so many other OSes that use Intel's driver don't have this problem even on the previous e1000.c implementation, but I can't find any articles that say the MICROWIRE or EEPROM spec requires such sequence, and actually hardware works fine without it (i.e. real i82540EM has been working on NetBSD). This fix also changes initialization to clear each state value in struct eecd_state individually rather than using memset() against the whole structre. The old_eecd member stores the last SK and CS signal levels and it should be preserved even after reset of internal EEPROM state to detect next signal edges for proper EEPROM emulation. Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-19e1000: secrc supportMichael S. Tsirkin
Add support for secrc field. Reportedly needed by old RHEL guests. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19e1000: fix access 4 bytes beyond buffer endMichael S. Tsirkin
We do range check for size, and get size as buffer, but copy size + 4 bytes (4 is for FCS). Let's copy size bytes but put size + 4 in length. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-14Change #define DEBUG to #define E1000_DEBUG in hw/e1000.cJes Sorensen
Change #define DEBUG to #define E1000_DEBUG in hw/e1000.c to make it possible to build QEMU with -DDEBUG Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-14e1000: make some tables 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-08e1000: fix build on Ubuntu with _FORTIFY_SOURCEThomas Monjalon
There was a pointer cast warning on Ubuntu since _FORTIFY_SOURCE has been reenabled. _FORTIFY_SOURCE had been disabled by 4a24470497360d8b77568b83008d0e9d6eb0787d and reenabled by 849583050d5f6f782718be8cb50688978973fbea. Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-01-06Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2009-12-23e1000: add link to data sheetMichael S. Tsirkin
Link to data sheet at intel.com so people can find it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23e1000: switch to symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated object binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-19e1000: Don't muck with PCI commmand registerAnthony Liguori
Otherwise, the driver does not work in Linux after the INT_DISABLE changes in PCI. Michael Tsirkin had a patch to do this, I'm not sure what happened to it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03e1000: Fix warning from code reviewStefan Weil
A code review run by Steve Grubb complained about code in e1000.c: In hw/e1000.c at line 89, vlan is declared to be 4 bytes. At line 382 is an attempt to do a memmove over it with a size of 12. This was fixed by splitting the memmove in two calls and adding a comment to the declaration of vlan and data. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert e1000 to NICStateMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-12e1000 fix: read access to some registers is missing.Kay Ackermann
While writing working on an e1000 driver for my university's OS I noticed that some registers aren't readable in QEMU, but they should be readable as stated in Intels Driver Developer Manual (and also verified on real hardware). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce FMT_PCIBUS for printf format for pcibus_t.Isaku Yamahata
This patch is preliminary for 64bit BAR. Later pcibus_t will be changed from uint32_t to uint64_t. Introduce FMT_PCIBUS for printf format for pcibus_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-07v3: don't call reset functions on cpu initializationGlauber Costa
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-30Remove e1000 rom loading hackAnthony Liguori
The gPXE rom supports BEV properly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move net-checksum.c under net/Mark McLoughlin
Also add a new net/checksum.h header Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27e1000: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27e1000: unfold mac_regarraystosave arrayJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27e1000: unfold mac_reg_tosave arrayJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27e1000: use qdev properties for configuration.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: move unregister from PCIDevice to PCIDeviceInfoGerd Hoffmann
One more cleanup while being at it ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-08-27e1000 cleanupJuan Quintela
Remove un needed casts from void *. Use DO_UPCAST() instead of blind casts Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-30e1000.c doesn't properly emulate EERD and ICS registersBill Paul
Once again, the emulation of the EERD and ICS registers in e1000.c is incorrect. Nobody has noticed this before because none of the Intel-written e1000 drivers use these registers, and all of the independently written open source drivers copy Intel's example, so they don't use them either. Regardless, these registers are documented in the programmer's manuals, and their emulated behavior doesn't match the verified behavior of real hardware, so any software that does use them doesn't function correctly. -Bill Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16fix for bad macaddr of e1000 in Windows 2003 server with original MS driverNaphtali Sprei
The sequence of reading from eeprom is "offset by one" moved because of a false detection of a clock cycle after an eeprom reset. Keeping the last clock value after a reset keeps it in sync. Signed-off-by: Naphtali Sprei <nsprei@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-09qdev: update pci device registration.Gerd Hoffmann
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch of parameters. Also adds config_read and config_write callbacks to PCIDeviceInfo, so drivers needing these can be converted to the qdev device API too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-17Revert "Update irqs on reset and device load"Blue Swirl
This reverts commit 3dcd219f09d6c1817bf9a132899e6b925f7a0914. It is incorrect to call qemu_irq functions (or any other functions that access other device state) during savevm/loadvm. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-10Merge branch 'net-queue'Anthony Liguori
* net-queue: (28 commits) virtio-net: Increase filter and control limits virtio-net: Add new RX filter controls virtio-net: MAC filter optimization virtio-net: Fix MAC filter overflow handling virtio-net: reorganize receive_filter() virtio-net: Use a byte to store RX mode flags virtio-net: Add version_id 7 placeholder for vnet header support virtio-net: implement rx packet queueing net: make use of async packet sending API in tap client net: add qemu_send_packet_async() net: split out packet queueing and flushing into separate functions net: return status from qemu_deliver_packet() net: add return value to packet receive handler net: pass VLANClientState* as first arg to receive handlers net: re-name vc->fd_read() to vc->receive() net: add fd_readv() handler to qemu_new_vlan_client() args net: only read from tapfd when we can send net: vlan clients with no fd_can_read() can always receive net: move the tap buffer into TAPState net: factor tap_read_packet() out of tap_send() ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09Update irqs on reset and device loadBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09Register reset functions for e1000 and rtl8139Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 16:11:36 +0000