aboutsummaryrefslogtreecommitdiff
path: root/hw/dma
AgeCommit message (Collapse)Author
2016-03-16bcm2835_dma: add emulation of Raspberry Pi DMA controllerGrégory ESTRADE
At present, all DMA transfers complete inline (so a looping descriptor queue will lock up the device). We also do not model pause/abort, arbitrarion/priority, or debug features. Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1457467526-8840-6-git-send-email-Andrew.Baumann@microsoft.com [AB: implement 2D mode, cleanup/refactoring for upstream submission] Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-07i8257: fix Terminal Count statusHervé Poussineau
When a DMA transfer is done (ie all bytes have been transfered), the corresponding Terminal Count bit must be set in the status register. This bit is already cleared in i8257_read_cont and i8257_write_cont when required. This fixes (at least) floppy transfer in IBM 40p firmware, which checks in DMA controller if everything went fine. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1456404332-31556-1-git-send-email-hpoussin@reactos.org> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-20etraxfs_dma: Dont forward zero-length payload to clientsEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-03dma: remove now useless DMA_* functionsHervé Poussineau
Keep only DMA_init function as a wrapper around DMA controllers creation. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-20-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: implement the IsaDma interfaceHervé Poussineau
Rewrite the global DMA_*() functions to use the IsaDma interface. Note that these functions will be deleted in a few commits. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-12-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: move state definition to new independent headerHervé Poussineau
We will now be able to embed the i8257 interrupt controller in another object. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-10-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: QOM'ifyHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-9-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: add missing constHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-8-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: make the DMA running method per controllerHervé Poussineau
This removes some static/global variables, and we're now running only the required controller (master or slave) Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-7-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: rename functions to start with i8257_ prefixHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-6-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: rename struct dma_regs to I8257RegsHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-5-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: rename struct dma_cont to I8257StateHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-4-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: pass ISA bus to DMA_init() functionHervé Poussineau
i8257 DMA controller exists on one ISA bus, so let's specify it at initialization. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-3-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i82374: device only existed as ISA device, so simplify deviceHervé Poussineau
Merge ISAi82374State fields into parent structure I82374State. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-2-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2016-01-29arm devices: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-36-git-send-email-peter.maydell@linaro.org
2016-01-29arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-29x86: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29unicore: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-9-git-send-email-peter.maydell@linaro.org
2016-01-11hw/dma/xilinx_axidma: remove dead codeAndrew Jones
stream_desc_show() (and DEBUG_ENET) appear to be unused, as the function isn't compilable (there are broken PRI format strings). Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1452084792-17424-1-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17arm: soc-dma: use hwaddr instead of target_ulong in printfPaolo Bonzini
This is a first baby step towards removing widespread inclusion of cpu.h and compiling more devices once (so that arm, aarch64 and in the future target-multi can share the object files). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: changed __FUNCTION__ to __func__ since we're touching these lines of code anyway] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-06hw/dma/pxa2xx: Remove superfluous memsetThomas Huth
g_malloc0 already clears the memory, so no need for the additional memset here. And while we're at it, also convert the g_malloc0 to the preferred g_new0. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-09i8257: remove cpu_request_exit irqPaolo Bonzini
This is unused. cpu_exit now is almost exclusively an internal function to the CPU execution loop. In a few patches, we'll change the remaining occurrences to qemu_cpu_kick, making it truly internal. Reviewed-by: Richard henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09i8257: rewrite DMA_schedule to avoid hooking into the CPU loopPaolo Bonzini
The i8257 DMA controller uses an idle bottom half, which by default does not cause the main loop to exit. Therefore, the DMA_schedule function is there to ensure that the CPU relinquishes the iothread mutex to the iothread. However, this is not enough since the iothread will call aio_compute_timeout() and go to sleep again. In the iothread world, forcing execution of the idle bottom half is much simpler, and only requires a call to qemu_notify_event(). Do it, removing the need for the "cpu_request_exit" pseudo-irq. The next patch will remove it. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07arm: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) @@ type T; expression n; @@ -(T *)g_new(T, n) +g_new(T, n) @@ type T; expression n; @@ -(T *)g_new0(T, n) +g_new0(T, n) @@ type T; expression p, n; @@ -(T *)g_renew(T, p, n) +g_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1440524394-15640-1-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-11dma/rc4030: convert to QOMHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: use trace events instead of custom loggingHervé Poussineau
Remove also unneeded debug logs. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: document register at offset 0x210Hervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: do not use old_mmio accessesHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: use AddressSpace and address_space_rw in usersHervé Poussineau
Now that rc4030 internally uses an AddressSpace for DMA handling, make its root memory region public. This is especially usefull for dp8393x netcard, which now uses well known QEMU types and methods. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: create custom DMA address spaceHervé Poussineau
Add a new memory region in system address space where DMA address space definition (the 'translation table') belongs, so we can update on the fly the DMA address space. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-04-26Switch non-CPU callers from ld/st*_phys to address_space_ld/st*Peter Maydell
Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-03-19omap: Fix warnings from SparseStefan Weil
Sparse report: arm/omap1.c:1015:9: warning: returning void-valued expression arm/omap1.c:1084:9: warning: returning void-valued expression arm/omap1.c:1178:9: warning: returning void-valued expression arm/omap1.c:1287:9: warning: returning void-valued expression arm/omap1.c:1382:9: warning: returning void-valued expression arm/omap1.c:1650:9: warning: returning void-valued expression arm/omap1.c:1778:9: warning: returning void-valued expression arm/omap1.c:1985:9: warning: returning void-valued expression arm/omap1.c:210:9: warning: returning void-valued expression arm/omap1.c:2213:9: warning: returning void-valued expression arm/omap1.c:2352:9: warning: returning void-valued expression arm/omap1.c:2447:9: warning: returning void-valued expression arm/omap1.c:2640:9: warning: returning void-valued expression arm/omap1.c:317:9: warning: returning void-valued expression arm/omap1.c:3413:13: warning: returning void-valued expression arm/omap1.c:3414:13: warning: returning void-valued expression arm/omap1.c:3415:14: warning: returning void-valued expression arm/omap1.c:3589:9: warning: returning void-valued expression arm/omap1.c:443:9: warning: returning void-valued expression arm/omap1.c:588:9: warning: returning void-valued expression arm/omap1.c:860:9: warning: returning void-valued expression arm/omap2.c:1362:9: warning: returning void-valued expression arm/omap2.c:450:9: warning: returning void-valued expression arm/omap2.c:695:9: warning: returning void-valued expression arm/omap2.c:760:9: warning: returning void-valued expression hw/char/omap_uart.c:115:9: warning: returning void-valued expression hw/display/omap_dss.c:1019:9: warning: returning void-valued expression hw/display/omap_dss.c:215:9: warning: returning void-valued expression hw/display/omap_dss.c:380:9: warning: returning void-valued expression hw/display/omap_dss.c:739:9: warning: returning void-valued expression hw/display/omap_dss.c:931:9: warning: returning void-valued expression hw/dma/omap_dma.c:139:5: warning: returning void-valued expression hw/dma/omap_dma.c:1505:9: warning: returning void-valued expression hw/dma/omap_dma.c:1860:9: warning: returning void-valued expression hw/gpio/omap_gpio.c:116:9: warning: returning void-valued expression hw/misc/omap_gpmc.c:627:9: warning: returning void-valued expression hw/misc/omap_l4.c:85:9: warning: returning void-valued expression hw/misc/omap_sdrc.c:95:9: warning: returning void-valued expression hw/misc/omap_tap.c:98:9: warning: returning void-valued expression hw/sd/omap_mmc.c:409:9: warning: returning void-valued expression hw/ssi/omap_spi.c:229:9: warning: returning void-valued expression hw/timer/omap_gptimer.c:447:9: warning: returning void-valued expression Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10pl330.c: remove superfluous '\n' around error_setgGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16hw/dma/i8257: Silence phony error messagePhilipp Hahn
Convert into trace event. Otherwise the message dma: unregistered DMA channel used nchan=0 dma_pos=0 dma_len=1 gets printed every time and fills up the log-file with 50 MiB / minute. Signed-off-by: Philipp Hahn <hahn@univention.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-24dma: axidma: Variablise repeated s->streams[i] sub-exprPeter Crosthwaite
This have 6 inline usages. Make it a bit more readable by using a local variable. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-30hw: Fix qemu_allocate_irqs() leaksAndreas Färber
Replace qemu_allocate_irqs(foo, bar, 1)[0] with qemu_allocate_irq(foo, bar, 0). This avoids leaking the dereferenced qemu_irq *. Cc: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de> [PC Changes: * Applied change to instance in sh4/sh7750.c ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru> [AF: Fix IRQ index in sh4/sh7750.c] Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-10hw/dma/xilinx_axidma: Remove unused stream_halted() functionPeter Maydell
The stream_halted() function is never used; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-15Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140515' ↵Peter Maydell
into staging migration/next for 20140515 # gpg: Signature made Thu 15 May 2014 02:32:25 BST using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20140515: usb: fix up post load checks migration: show average throughput when migration finishes savevm: Remove all the unneeded version_minimum_id_old (rest) savevm: Remove all the unneeded version_minimum_id_old (usb) Split ram_save_block arch_init: Simplify code for load_xbzrle() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-14savevm: Remove all the unneeded version_minimum_id_old (rest)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-13hw/dma/omap_dma: Add (uint32_t) casts when shifting uint16_t by 16Peter Maydell
Add missing (uint32_t) casts in cases where we're trying to put a uint16_t value into the top half of a 32-bit field. These were already present in some but not all places. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13savevm: Remove all the unneeded version_minimum_id_old (arm)Juan Quintela
After commit 767adce2d, they are redundant. This way we don't assign them except when needed. Once there, there were lots of cases where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (apart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: fixed minor conflict, corrected commit message typos] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-05PortioList: Store PortioList in device stateKirill Batuzov
PortioList is an abstraction used for construction of MemoryRegionPortioList from MemoryRegionPortio. It can be used later to unmap created memory regions. It also requires proper cleanup because some of the memory inside is allocated dynamically. By moving PortioList ot device state we make it possible to cleanup later and avoid leaking memory. This change spans several target platforms. The following testcases cover all changed lines: qemu-system-ppc -M prep qemu-system-i386 -vga qxl qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0 Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-05hw: Consistently name Error * objects err, and not errpMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-19qom: Add check() argument to object_property_add_link()Stefan Hajnoczi
There are currently three types of object_property_add_link() callers: 1. The link property may be set at any time. 2. The link property of a DeviceState instance may only be set before realize. 3. The link property may never be set, it is read-only. Something similar can already be achieved with object_property_add_str()'s set() argument. Follow its example and add a check() argument to object_property_add_link(). Also provide default check() functions for case #1 and #2. Case #3 is covered by passing a NULL function pointer. Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Tweaked documentation comment] Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-25 21:58:35 +0000