| Age | Commit message (Collapse) | Author |
|---|
|
The PL08x model currently will unconditionally call hw_error()
if the DMA engine is enabled by the guest. This has been
present since the PL080 model was edded in 2006, and is
presumably either unintentional debug code left enabled,
or a guard against untested DMA engine code being used.
Remove the hw_error(), since we now have a guest which
will actually try to use the DMA engine (the self-test
binary for the AN505 MPS2 FPGA image).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
A bug in the handling of the register address decode logic
for the PL08x meant that we were incorrectly treating
accesses to the DMA channel registers (DMACCxSrcAddr,
DMACCxDestaddr, DMACCxLLI, DMACCxControl, DMACCxConfiguration)
as bad offsets. Fix this long-standing bug.
Fixes: https://bugs.launchpad.net/qemu/+bug/1637974
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The PL080/PL081 model is missing a reset function; implement it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Currently our PL080/PL081 model uses a combination of the CPU's
address space (via cpu_physical_memory_{read,write}()) and the
system address space for performing DMA accesses.
For the PL081s in the MPS FPGA images, their DMA accesses
must go via Master Security Controllers. Switch the
PL080/PL081 model to take a MemoryRegion property which
defines its downstream for making DMA accesses.
Since the PL08x are only used in two board models, we
make provision of the 'downstream' link mandatory and convert
both users at once, rather than having it be optional with
a default to the system address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The PL080 and PL081 have three outgoing interrupt lines:
* DMACINTERR signals DMA errors
* DMACINTTC is the DMA count interrupt
* DMACINTR is a combined interrupt, the logical OR of the other two
We currently only implement DMACINTR, because that's all the
realview and versatile boards needed, but the instances of the
PL081 in the MPS2 firmware images use all three interrupt lines.
Implement the missing DMACINTERR and DMACINTTC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Create a new include file for the pl081's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The M1 and M2 bits are both used for configuring the endianness
of the AHB master interfaces, so the second PL080_CONF_M1 should
be PL080_CONF_M2 instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/1631773
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1476274451-26567-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Move the inclusion out of hw/hw.h, most files do not need it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
|
|
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
device_add plugs devices into suitable bus. For "real" buses, that
actually connects the device. For sysbus, the connections need to be
made separately, and device_add can't do that. The device would be
left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Let pl081 inherit from pl080 and replace triple SysBus initfn with two
instance_inits.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
