aboutsummaryrefslogtreecommitdiff
path: root/hw/display
AgeCommit message (Collapse)Author
2023-08-07virtio-gpu: reset gfx resources in main threadMarc-André Lureau
Calling OpenGL from different threads can have bad consequences if not carefully reviewed. It's not generally supported. In my case, I was debugging a crash in glDeleteTextures from OPENGL32.DLL, where I asked qemu for gl=es, and thus ANGLE implementation was expected. libepoxy did resolution of the global pointer for glGenTexture to the GLES version from the main thread. But it resolved glDeleteTextures to the GL version, because it was done from a different thread without correct context. Oops. Let's stick to the main thread for GL calls by using a BH. Note: I didn't use atomics for reset_finished check, assuming the BQL will provide enough of sync, but I might be wrong. Acked-by: Dongwon Kim <dongwon.kim@intel.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230726173929.690601-3-marcandre.lureau@redhat.com>
2023-08-07virtio-gpu: free BHs, by implementing unrealizeMarc-André Lureau
Acked-by: Dongwon Kim <dongwon.kim@intel.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230726173929.690601-2-marcandre.lureau@redhat.com>
2023-07-17virtio-gpu-udmabuf: correct naming of QemuDmaBuf size propertiesDongwon Kim
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht' and 'backing_height' as these commonly indicate the size of the whole surface (e.g. guest's Xorg extended display). Then use 'width' and 'height' for sub region in there (e.g. guest's scanouts). Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
2023-07-17virtio-gpu: replace the surface with null surface when resettingDongwon Kim
The primary guest scanout shows the booting screen right after reboot but additional guest displays (i.e. max_ouptuts > 1) will keep displaying the old frames until the guest virtio gpu driver gets initialized, which could cause some confusion. A better way is to to replace the surface with a place holder that tells the display is not active during the reset of virtio-gpu device. And to immediately update the surface with the place holder image after the switch, displaychangelistener_gfx_switch needs to be called with 'update == TRUE' in dpy_gfx_replace_surface when the new surface is NULL. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230627224451.11739-1-dongwon.kim@intel.com>
2023-07-17virtio-gpu: fix potential divide-by-zero regressionMarc-André Lureau
Commit 9462ff4695aa0 ("virtio-gpu/win32: allocate shareable 2d resources/images") introduces a division, which can lead to crashes when "height" is 0. Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1744 Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2023-07-10hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX commentsAlex Bennée
Fixes: 544f0278af (virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-4-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost-user-gpu: implement get_edid frontend featureErico Nunes
Implement the frontend side of the get_edid feature in the qemu vhost-user-gpu frontend device. Signed-off-by: Erico Nunes <ernunes@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230626164708.1163239-5-ernunes@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10virtio-gpu: refactor generate_edid function to virtio_gpu_baseErico Nunes
This functionality can be shared with upcoming use in vhost-user-gpu, so move it to the shared file to avoid duplicating it. Signed-off-by: Erico Nunes <ernunes@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230626164708.1163239-2-ernunes@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-27virtio-gpu-virgl: use D3D11_SHARE_TEXTURE when availableMarc-André Lureau
Enable D3D texture sharing when possible, and pass it to the texture display callbacks. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-21-marcandre.lureau@redhat.com>
2023-06-27ui: add optional d3d texture pointer to scanout textureMarc-André Lureau
The following patch will get the underlying D3D11 Texture2D from the virgl renderer scanout. Pass it along to the texture scanout callbacks as a priliminary step, to simplify review. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-20-marcandre.lureau@redhat.com>
2023-06-27virtio-gpu-virgl: teach it to get the QEMU EGL displayMarc-André Lureau
virgl offers a few features that require to have access to the underlying EGLDisplay. This is the case for the D3D texture sharing support. The API callback is merged for virgl 1.0: https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/1113 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-18-marcandre.lureau@redhat.com>
2023-06-27virtio-gpu/win32: allocate shareable 2d resources/imagesMarc-André Lureau
Allocate pixman bits for scanouts with qemu_win32_map_alloc() so we can set a shareable handle on the associated display surface. Note: when bits are provided to pixman_image_create_bits(), you must also give the rowstride (the argument is ignored when bits is NULL) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230606115658.677673-11-marcandre.lureau@redhat.com>
2023-06-27virtio-gpu: OUT_OF_MEMORY if failing to create udmabufDongwon Kim
Respond with VIRTIO_GPU_RESP_ERR_OUT_OF_MEMORY if it fails to create an udmabuf for the blob resource. v2: consolidated return statments and removed an unnecessary style change Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230627003453.5321-1-dongwon.kim@intel.com>
2023-06-27virtio-gpu-udmabuf: create udmabuf for blob even when iov_cnt == 1Dongwon Kim
There were often cases where a scanout blob sometimes has just 1 entry that is linked to many pages in it. So just checking whether iov_cnt is 1 is not enough for screening small, non-scanout blobs. Therefore adding iov_len check as well to make sure it creates an udmabuf only for a scanout blob, which is at least bigger than one page size. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230621222704.29932-1-dongwon.kim@intel.com>
2023-06-27virtio-gpu: Make non-gl display updates work again when blob=trueVivek Kasireddy
In the case where the console does not have gl capability, and if blob is set to true, make sure that the display updates still work. Commit e86a93f55463 accidentally broke this by misplacing the return statement (in resource_flush) causing the updates to be silently ignored. Fixes: e86a93f55463 ("virtio-gpu: splitting one extended mode guest fb into n-scanouts") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20230623060454.3749910-1-vivek.kasireddy@intel.com>
2023-06-27virtio-gpu: Optimize 2D resource data transferKeqian Zhu
The following points sometimes can reduce much data to copy: 1. When width matches, we can transfer data with one call of iov_to_buf(). 2. Only the required height need to transfer, not whole image. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230612021358.25068-1-zhukeqian1@huawei.com>
2023-06-26vhost-user: fully use new backend/frontend namingManos Pitsidianakis
Slave/master nomenclature was replaced with backend/frontend in commit 1fc19b65279a ("vhost-user: Adopt new backend naming") This patch replaces all remaining uses of master and slave in the codebase. Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05bulk: Remove pointless QOM castsPhilippe Mathieu-Daudé
Mechanical change running Coccinelle spatch with content generated from the qom-cast-macro-clean-cocci-gen.py added in the previous commit. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230601093452.38972-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-28virtio-gpu: add a FIXME for virtio_gpu_load()Marc-André Lureau
It looks like the virtio_gpu_load() does not compute and set the offset, the same way virtio_gpu_set_scanout() does. This probably results in incorrect display until the scanout/framebuffer is updated again, I guess we should fix it, although I haven't checked this yet. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230515132518.1025853-1-marcandre.lureau@redhat.com>
2023-05-05hw/display/sm501: Remove unneeded increment from loopBALATON Zoltan
As Coverity points out (CID 1508621) the calculation to increment i in the fill fallback loop is ineffective as it is overwritten in next statement. This was left there by mistake from a previous version but is not needed in the current approach so remove the superfluous increment statement. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230405161234.6EF0A74633D@zero.eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-04-28hw: replace most qemu_bh_new calls with qemu_bh_new_guardedAlexander Bulekov
This protects devices from bh->mmio reentrancy issues. Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230427211013.2994127-5-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-04-20hw/display: Compile vga.c as target-independent codeThomas Huth
The target checks here are only during the initialization, so they are not performance critical. We can switch these to runtime checks to avoid that we have to compile this file multiple times during the build, and make the code ready for an universal build one day. Message-Id: <20230412163501.36770-1-thuth@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-03-13ui: rename cursor_{put->unref}Marc-André Lureau
The naming is more conventional in QEMU. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2023-03-09Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into stagingPeter Maydell
Enable PV backends with Xen/KVM emulation This is phase 2, following on from the basic platform support which was already merged. • Add a simple single-tenant internal XenStore implementation • Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table • Provide emulated back ends for Xen operations • Header cleanups to allow PV back ends to build without Xen itself • Enable PV back ends in emulated mode • Documentation update Tested-by: Paul Durrant <paul@xen.org> ... on real Xen (master branch, 4.18) with a Debian guest. # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h # em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB # KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk # AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS # +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu # Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ # jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca # I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD # SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS # OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr # km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0 # VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18 # 1mq9v6Xe9RQZ # =JGLX # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT # gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544 # gpg: issuer "dwmw@amazon.co.uk" # gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown] # gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544 * tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits) docs: Update Xen-on-KVM documentation for PV disk support MAINTAINERS: Add entry for Xen on KVM emulation i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation hw/xen: Implement soft reset for emulated gnttab hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore hw/xen: Add emulated implementation of XenStore operations hw/xen: Add emulated implementation of grant table operations hw/xen: Hook up emulated implementation for event channel operations hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it hw/xen: Avoid crash when backend watch fires too early hw/xen: Build PV backend drivers for CONFIG_XEN_BUS hw/xen: Rename xen_common.h to xen_native.h hw/xen: Use XEN_PAGE_SIZE in PV backend drivers hw/xen: Move xenstore_store_pv_console_info to xen_console.c hw/xen: Add xenstore operations to allow redirection to internal emulation hw/xen: Add foreignmem operations to allow redirection to internal emulation hw/xen: Pass grant ref to gnttab unmap operation hw/xen: Add gnttab operations to allow redirection to internal emulation hw/xen: Add evtchn operations to allow redirection to internal emulation hw/xen: Create initial XenStore nodes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-08hw/display/sm501: Add debug property to control pixman usageBALATON Zoltan
Add a property to allow disabling pixman and always use the fallbacks for different operations which is useful for testing different drawing methods or debugging pixman related issues. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <61768ffaefa71b65a657d1365823bd43c7ee9354.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-07hw/xen: Build PV backend drivers for CONFIG_XEN_BUSDavid Woodhouse
Now that we have the redirectable Xen backend operations we can build the PV backends even without the Xen libraries. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Use XEN_PAGE_SIZE in PV backend driversDavid Woodhouse
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is provided by QEMU itself in xen_backend_ops.h. For backends which may be built for emulation mode, use the latter. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-07hw/xen: Add foreignmem operations to allow redirection to internal emulationDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-02-27hw/display/sm501: Add fallbacks to pixman routinesBALATON Zoltan
Pixman may return false if it does not have a suitable implementation. Add fallbacks to handle such cases. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reported-by: Rene Engel <ReneEngel80@emailn.de> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-Id: <20ed9442a0146238254ccc340c0d1efa226c6356.1677445307.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-27hw/display/sm501: Implement more 2D raster operationsBALATON Zoltan
Add simple implementation for two raster operations that are used by AmigaOS which fixes graphics problems in some programs using these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reported-by: Rene Engel <ReneEngel80@emailn.de> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <17ef3c59dc7868f75034e9ebe21e2999c8f718d4.1677445307.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-27hw/display/sm501: Alias 'dma-offset' QOM property in chipset objectPhilippe Mathieu-Daudé
No need to use an intermediate 'dma-offset' property in the chipset object. Alias the property, so when the machine (here r2d-plus) sets the value on the chipset, it is propagated to the OHCI object. Note we can rename the chipset 'base' property as 'dma-offset' since the object is a non-user-creatable sysbus type. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20230203145536.17585-12-philmd@linaro.org>
2023-02-27hw/display/sm501: Embed OHCI QOM child in chipsetPhilippe Mathieu-Daudé
Note this device doesn't implement unrealize(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20230203145536.17585-11-philmd@linaro.org>
2023-02-14Do not include "qemu/error-report.h" in headers that do not need itThomas Huth
Include it in the .c files instead that use the error reporting functions. Message-Id: <20230210111931.1115489-1-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-08Don't include headers already included by qemu/osdep.hMarkus Armbruster
This commit was created with scripts/clean-includes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
2023-02-05hw/display/sm501: Code style fixBALATON Zoltan
Fix checkpatch warning about multi-line comment. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <8801292992a304609e1eac680fe36b515592b926.1674333199.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-02-05hw/display/sm501: Remove unneeded casts from void pointerBALATON Zoltan
This is not needed in C. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <58f599387dd0739ea1880bfb678872c0be26bf1b.1674333199.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-02-05hw/display/sm501: Remove parenthesis around constant macro definitionsBALATON Zoltan
No need to wrap constants in parenthesis. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <9194546b73b05e7098761ec62b2dfd0699b97b65.1674333199.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-01-19Merge tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru into ↵Peter Maydell
staging Monitor patches for 2023-01-19 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPJO+8SHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTbBwP/RsZLLDCz6moSet4Hly+vPTWibyYYDkS # uk6a70Ja7fsAcONumBaXdpoinPtbED662eYxidbLFr//tAjnKu57jnwAIFTTOKJc # sCVtdgOlbNSZFrqyIr8ctY6yKJLLBaa02in/BczFIQphPatpUwvxrvrdgxc58NNK # qaeKDnWKXvZ6EUaYPpruxqE5J/NV0ykyab9Rc8rNJqdUMnqbd662zHcA0l31misH # gAfKBhReo53XUbfvoFS9kaoBQaTJPk4CcKHaT7NJXR8ezlIEQVLtFzdfAf04kSdG # 8VRwwx5NDpmafATEaMXJhJ74Fyc8biDWXoQ6aA1jdUCu39B2EPl1H1qlCG9ZYp7w # CkbJU6UwtOYsG11NU8Mr1u9rMlAgAVkkLsMYiiI4cpLBkI0vkoV66ms3oZgYUtbq # /TgCpfjKpE87ZBLIwJjGsg+TMN2AH5lpt/49HV8QEFA8mI7h29oo2HvheXE7PPzH # b9iIe9ADrKwB5DpJW2vigPj+fSHqoSGd3R/hUcMVOubKnJme97mys2hD+sfxga/H # qfKLzgTqQI2dGhfow/8wzfYdfYmkii+ggDyzcxLAxx2ITO/fLWJygmTgXJmA3dl6 # pnpZvhOu4dEgK4VstugXcvgCVHUVXd9wqI9wxJAc+mKanTmZIJBnxCm/QVG2/w/d # 5IgmP9Se7vb0 # =7OEC # -----END PGP SIGNATURE----- # gpg: Signature made Thu 19 Jan 2023 12:47:43 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * tag 'pull-monitor-2023-01-19' of https://repo.or.cz/qemu/armbru: ui: Simplify control flow in qemu_mouse_set() ui: Split hmp_mouse_set() and move the HMP part to ui/ ui: Don't check for mode change after mouse_set error ui: Reduce nesting in hmp_change_vnc() slightly ui: Factor out hmp_change_vnc(), and move to ui/ui-hmp-cmds.c ui: Improve "change vnc" error reporting ui: Move HMP commands from monitor to new ui/ui-hmp-cmds.c ui: Factor out qmp_add_client() parts and move to ui/ui-qmp-cmds.c ui: Move QMP commands from monitor to new ui/ui-qmp-cmds.c ui: Clean up a few things checkpatch.pl would flag later on ui/spice: Give hmp_info_spice()'s channel_names[] static linkage ui/spice: QXLInterface method set_mm_time() is now dead, drop ui/spice: Require spice-server >= 0.14.0 Revert "hmp: info spice: take out webdav" ui/spice: Require spice-protocol >= 0.14.0 ui: Fix silent truncation of numeric keys in HMP sendkey ui: Check numeric part of expire_password argument @time properly Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-19Merge tag 'trivial-branch-for-8.0-pull-request' of ↵Peter Maydell
https://gitlab.com/laurent_vivier/qemu into staging trivial branch pull request 20230118 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPHpRASHGxhdXJlbnRA # dml2aWVyLmV1AAoJEPMMOL0/L748fwEP+wTA6dBYqRnZMCPEkk6yy0nSVr6GF8FA # i9JrUbRuBf8WT2RAFJEwOyACTaYgCwqU9tu6UxG2ekGfGDtR84HH1yozTAbBuPct # qoT/cvrQ0/Nfymw1Ia1vH5D6EQiAn+j6/1C41PEHvqTQBMe8E4U8jDIwbXTaJS7j # QSUDplRfCbSBXQ9ctFrcD6XxX06dj4U9l8L4gl5Uc4B1OmFacyJnfzMIyVRTIhvF # S4sKB/8B36emFITw/gk+MW5HnBgjEIWvZjof71eglMqo79jmacGeOe8NQi1+ApQ1 # lVmllKewdgLHVwdOGVX4dCJQdhSL/7DjreqtKGrUmhZfJdmCWJdl3jVWqhr4lfME # U7ytd68iLdKgfKqepc3+WbhA8pWT+brPVpTU9hq17DsNJqeZa6628OguDEtjz9dP # 4Y4XFZMxFadYl4YaCpGzTN1tqsrO8Ct+Kvq/90nt5FUeTX+i+/WM/9XXNf9MD4VS # OVCwHXCa4yHMMq2LGV0sWaL7vSI26lv0asKtalAelbVZhVyB1kSZfde2rZXuhoD5 # S2d9x2bcFG6WNlDfyaANkCKyHlxUaOroQVE+y0SqgtaC2oPhuXtG6fusiyvjG9+l # 9O6jy87e4uR+Xach6MmybMjiPDi0VMvPayVz3BR/6hBZZB/GkLO1OmNQcZiXcbOd # yROzKPmyZ/q+ # =35x0 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 18 Jan 2023 07:51:44 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * tag 'trivial-branch-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu: hw/ssi/sifive_spi.c: spelling: reigster hw/cxl/cxl-host: Fix an error message typo hw/cxl/cxl-cdat.c: spelling: missmatch hw/pvrdma: Protect against buggy or malicious guest driver ccid-card-emulated: fix cast warning/error hw/i386/pc: Remove unused 'owner' argument from pc_pci_as_mapping_init tests/qtest/test-hmp: Improve the check for verbose mode hw/usb: Mark the XLNX_VERSAL-related files as target-independent hw/intc: Mark more interrupt-controller files as target independent hw/cpu: Mark arm11 and realview mpcore as target-independent code hw/arm: Move various units to softmmu_ss[] hw/tpm: Move tpm_ppi.c out of target-specific source set hw/intc: Move some files out of the target-specific source set hw/display: Move omap_lcdc.c out of target-specific source set Call qemu_socketpair() instead of socketpair() when possible Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-19ui/spice: QXLInterface method set_mm_time() is now dead, dropMarkus Armbruster
SPICE_NEEDS_SET_MM_TIME is now always off. Bury the dead code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230109190321.1056914-7-armbru@redhat.com>
2023-01-19ui/spice: Require spice-server >= 0.14.0Markus Armbruster
Version 0.14.0 is now old enough to have made it into the major distributions: Debian 11: 0.14.3 RHEL-8: 0.14.3 FreeBSD (ports): 0.15.0 Fedora 35: 0.15.0 Ubuntu 20.04: 0.14.2 OpenSUSE Leap 15.3: 0.14.3 Requiring it lets us drop a number of version checks. The next commit will clean up some more. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230109190321.1056914-6-armbru@redhat.com>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-16hw/display: Move omap_lcdc.c out of target-specific source setPhilippe Mathieu-Daudé
While only used by the ARM targets, this device can be built once for all. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221209170042.71169-2-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230112134928.1026006-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-01-12hw/arm/omap: Drop useless casts from void * to pointerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-11hw/display: avoid creating empty loadable modulesDaniel P. Berrangé
When using --disable-virglrenderer, QEMU still creates hw-display-virtio-gpu-gl.so hw-display-virtio-vga-gl.so hw-display-virtio-gpu-pci-gl.so but when these are loaded, they provide no functionality as the code which registers types is not compiled in. Funtionally this is relatively harmless, because QEMU is fine loading a module with no types. This is rather confusing for users and OS distro maintainers though, as they think they have the GL functionality built, but in fact the module they are looking at provides nothing of value. The root cause is the use of 'when/if_true' rules when adding sources to the module source set. If all the rules evaluate to false, then we have declared the module, but not added anything to it. We need to put declaration of the entire module inside a condition based on existance of the 3rd party library deps that are mandatory. Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1352 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221219125830.2369169-1-berrange@redhat.com> [Do not check for pixman. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-08include/hw/pci: Split pci_device.h off pci.hMarkus Armbruster
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the header don't actually need them. Similar structs live in their own headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h, PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and PCIESlot in pcie_port.h. Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with the code that needs them. Adjust include directives. This also enables the next commit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-6-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08virtio: introduce macro VIRTIO_CONFIG_IRQ_IDXCindy Lu
To support configure interrupt for vhost-vdpa Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index, Then we can reuse the functions guest_notifier_mask and guest_notifier_pending. Add the check of queue index in these drivers, if the driver does not support configure interrupt, the function will just return Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20221222070451.936503-2-lulu@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-16hw/display/virtio-vga: Convert TYPE_VIRTIO_VGA_BASE to 3-phase resetPeter Maydell
Convert the TYPE_VIRTIO_VGA_BASE class to 3-phase reset, so we don't need to use device_class_set_parent_reset() any more. Note that this is an abstract class itself; none of the subclasses override its reset method. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221125115240.3005559-3-peter.maydell@linaro.org
2022-12-15hw: Include the VMWare devices only in the x86 targetsThomas Huth
It seems a little bit weird that the para-virtualized x86 VMWare devices "vmware-svga" and "vmxnet3" also show up in non-x86 targets. They are likely pretty useless there (since the guest OSes likely do not have any drivers for those enabled), so let's change this and only enable those devices by default for the classical x86 targets. Message-Id: <20221213095144.42355-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 21:22:33 +0000