aboutsummaryrefslogtreecommitdiff
path: root/hw/core
AgeCommit message (Collapse)Author
2016-05-23nmi: remove x86 specific nmi handlingBandan Das
nmi_monitor_handle is wired to call the x86 nmi handler. So, we can directly use it at call sites. Signed-off-by: Bandan Das <bsd@redhat.com> Message-Id: <1463761717-26558-3-git-send-email-bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-20machine: add properties to compat_props incrementalyIgor Mammedov
Switch to adding compat properties incrementaly instead of completly overwriting compat_props per machine type. That removes data duplication which we have due to nested [PC|SPAPR]_COMPAT_* macros. It also allows to set default device properties from default foo_machine_options() hook, which will be used in following patch for putting VMGENID device as a function if ISA bridge on pc/q35 machines. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-20vl: Replace DT_NOGRAPHIC with machine optionEduardo Habkost
All DisplayType values are just UI options that don't affect any hardware emulation code, except for DT_NOGRAPHIC. Replace DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off" option, so hardware emulation code don't need to use the display_type variable. Cc: Michael Walle <michael@walle.cc> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-19hw: remove pio_addr_tPaolo Bonzini
pio_addr_t is almost unused, because these days I/O ports are simply accessed through the address space. cpu_{in,out}[bwl] themselves are almost unused; monitor.c and xen-hvm.c could use address_space_read/write directly, since they have an integer size at hand. This leaves qtest as the only user of those functions. On the other hand even portio_* functions use this type; the only interesting use of pio_addr_t thus is include/hw/sysbus.h. I guess I could move it there, but I don't see much benefit in that either. Using uint32_t is enough and avoids the need to include ioport.h everywhere. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19include: poison symbols in osdep.hPaolo Bonzini
Ensure that all target-independent files ignore poisoned symbols, and fix the fallout. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18loader: fix potential memory leakCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-04-07Sort the fw_cfg file listGerd Hoffmann
Entries are inserted in filename order instead of being appended to the end in case sorting is enabled. This will avoid any future issues of moving the file creation around, it doesn't matter what order they are created now, the will always be in filename order. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Added machine type handling for compatibility. This was a fairly complex change, this will preserve the order of fw_cfg for older versions no matter what order the firmware files actually come in. A list is kept of the correct legacy order and the entries will be inserted based upon their order in the list. Except that some entries are ordered (in a specific area of the list) based upon what order they appear on the command line. Special handling is added for those entries. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22hw/pci/pci.h: Don't include qemu-common.hMarkus Armbruster
qemu-common.h should only be included by .c files. Its file comment explains why: "No header file should depend on qemu-common.h, as this would easily lead to circular header dependencies." hw/pci/pci.h includes qemu-common.h, but its users only need pcibus_t and PCIHostDeviceAddress from it. Move them to hw/pci/pci.h and drop the ill-advised include. Include hw/pci/pci.h where the moved stuff is now missing. Except we can't in target-i386/kvm_i386.h, because that would break the i386-linux-user compile. Add PCIHostDeviceAddress to qemu/typedefs.h instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-21qdev: New DEFINE_PROP_ON_OFF_AUTOMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-35-git-send-email-armbru@redhat.com>
2016-03-04loader: Add data swap option to load-elfPeter Crosthwaite
Some CPUs are of an opposite data-endianness to other components in the system. Sometimes elfs have the data sections layed out with this CPU data-endianness accounting for when loaded via the CPU, so byte swaps (relative to other system components) will occur. The leading example, is ARM's BE32 mode, which is is basically LE with address manipulation on half-word and byte accesses to access the hw/byte reversed address. This means that word data is invariant across LE and BE32. This also means that instructions are still LE. The expectation is that the elf will be loaded via the CPU in this endianness scheme, which means the data in the elf is reversed at compile time. As QEMU loads via the system memory directly, rather than the CPU, we need a mechanism to reverse elf data endianness to implement this possibility. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04loader: add API to load elf headerPeter Crosthwaite
Add an API to load an elf header header from a file. Populates a buffer with the header contents, as well as a boolean for whether the elf is 64b or not. Both arguments are optional. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: Fix typo in comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04loader: Add load_image_mr() to load ROM image to a MemoryRegionPeter Maydell
Add a new function load_image_mr(), which behaves like load_image_targphys() except that it loads the ROM image to a specified MemoryRegion rather than to a specified physical address. This is useful when a ROM blob needs to be loaded to a particular flash or ROM device but the address of that device in the machine's address space is not known. (For instance, ROMs in devices, or ROMs which might exist in a different address space to the system address space.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455288361-30117-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-28migration: allow machine to enforce configuration section migrationGreg Kurz
Migration of pseries-2.3 doesn't have configuration section. Unfortunately, QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration section, and break migration both ways. This patch introduces a property which allows to enforce a configuration section for machines who don't have one. It can be set at startup: -machine enforce-config-section=on or later from the QEMU monitor: qom-set /machine enforce-config-section on It is up to the tooling to set or unset this property according to the version of the QEMU at the other end of the pipe. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-08qapi: Drop unused 'kind' for struct/enum visitEric Blake
visit_start_struct() and visit_type_enum() had a 'kind' argument that was usually set to either the stringized version of the corresponding qapi type name, or to NULL (although some clients didn't even get that right). But nothing ever used the argument. It's even hard to argue that it would be useful in a debugger, as a stack backtrace also tells which type is being visited. Therefore, drop the 'kind' argument as dead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com> [Harmless rebase mistake cleaned up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29hw/core: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-37-git-send-email-peter.maydell@linaro.org
2016-01-25fdc: Add fallback optionJohn Snow
Currently, QEMU chooses a drive type automatically based on the inserted media. If there is no disk inserted, it chooses a 1.44MB drive type. Change this behavior to be configurable, but leave it defaulted to 1.44. This is not earnestly intended to be used by a user or a management library, but rather exists so that pre-2.6 board types can configure it to be a legacy value. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1453495865-9649-8-git-send-email-jsnow@redhat.com
2016-01-21qdev: get_child_bus(): Use QOM lookup if availablePeter Crosthwaite
qbus_realize() adds busses as a QOM child of the device in addition to adding it to the qdev bus list. Change get_child_bus() to use the QOM child if it is available. This takes priority over the bus-list, but the child object is checked for type correctness. This prepares support for aliasing of buses. The use case is SoCs, where a SoC container needs to present buses to the board level, but the buses are implemented by controller IP we already model as self contained qbus-containing devices. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-18qdev: Free QemuOpts when the QOM path goes awayPaolo Bonzini
Otherwise there is a race where the DEVICE_DELETED event has been sent but attempts to reuse the ID will fail. Note that similar races exist for other QemuOpts, which this patch does not attempt to fix. For example, if the device is a block device, then unplugging it also deletes its backend. However, this backend's get deleted in drive_info_del(), which is only called when properties are destroyed. Just like device_finalize(), drive_info_del() is called some time after DEVICE_DELETED is sent. A separate patch series has been sent to plug this other bug. Character devices also have yet to be fixed. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-01-13error: Consistently name Error * objects err, and not errpMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster
Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Don't decorate original error message when adding to itMarkus Armbruster
Prepend the additional information, colon, space to the original message without enclosing it in parenthesis or quotes, like we do elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
2016-01-13sysbus: Don't use hw_error() in machine_init_done_notifiersMarkus Armbruster
platform_bus_map_irq() and platform_bus_map_mmio() use hw_error() to fail. They run in machine_init_done_notifiers, via platform_bus_init_notify() and link_sysbus_device(). Printing CPU registers is not helpful there. Replace hw_error() by error_report(); exit(1). If these are programming errors, it should be replaced by an assertion instead. While there, observe that both functions always return 0, and link_sysbus_device() ignores the return value. Change them to void. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1450370121-5768-9-git-send-email-armbru@redhat.com>
2016-01-13hw: Inline the qdev_prop_set_drive_nofail() wrapperMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13Use error_fatal to simplify obvious fatal errorsMarkus Armbruster
Done with this Coccinelle semantic patch: @@ type T; identifier FUN, RET; expression list ARGS; expression ERR, EC; @@ ( - T RET = FUN(ARGS, &ERR); + T RET = FUN(ARGS, &error_fatal); | - RET = FUN(ARGS, &ERR); + RET = FUN(ARGS, &error_fatal); | - FUN(ARGS, &ERR); + FUN(ARGS, &error_fatal); ) - if (ERR != NULL) { - error_report_err(ERR); - exit(EC); - } This is actually a more elegant version of my initial semantic patch by courtesy of Eduardo. It leaves dead Error * variables behind, cleaned up manually. Cc: qemu-arm@nongnu.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-11hw/core/qdev: Remove superfluous return statementThomas Huth
The "return;" statement at the end of device_set_realized() does not make much sense, so let's remove it. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-22pc: Move option_rom_has_mr/rom_file_has_mr globals to MachineClassEduardo Habkost
This way, these settings can be simply set on the corresponding machine_options() function, instead of requiring code in pc_compat_*() functions. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-17kvm: add support for -machine kernel_irqchip=splitMatt Gingell
This patch adds the initial plumbing for split IRQ chip mode via KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of kvm_*_in_kernel macros are defined to help clarify which component is where. Signed-off-by: Matt Gingell <gingell@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-17q35: Check propery to determine if iommu is setBandan Das
The helper function machine_iommu() isn't necesary. We can directly check for the property. Signed-off-by: Bandan Das <bsd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com>
2015-11-11qdev: provide qdev_reset_all_fn()David Hildenbrand
For TYPE_DEVICE, the dc->reset() function is not called on system resets yet. Until that is changed, we have to manually register a reset handler. Let's provide qdev_reset_all_fn(), that can directly be used - just like the reset handler that is already available for qbus. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-11-06replay: ptimerPavel Dovgalyuk
This patch adds deterministic replay for hardware periodic countdown timers. ptimer uses bottom halves layer to execute such an asynchronous callback. We put this callback into the replay queue instead of bottom halves one. When checkpoint is met by main loop thread, the replay queue is processed and callback is executed. Binding callback moment to one of the checkpoints makes it deterministic. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162456.8676.83366.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-09-19Use DEFINE_MACHINE() to register all machinesEduardo Habkost
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine automatically using a script. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> [AF: Style cleanups, convert imx25_pdk machine] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19machine: Set MachineClass::name automaticallyEduardo Habkost
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the class name. So instead of requiring each subclass to set MachineClass::name manually, we can now set it automatically at the TYPE_MACHINE class_base_init() function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> [AF/ehabkost: Updated for s390-ccw machines] [AF: Cleanup of intermediate virt and vexpress name handling] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19machine: Ensure all TYPE_MACHINE subclasses have the right suffixEduardo Habkost
Now that all non-abstract TYPE_MACHINE subclasses have the -machine suffix, add an assert to ensure this will be always true. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19qdev: Do not use slow [*] expansion for GPIO creationPavel Fedin
Expansion of [*] suffix is very slow because index expansion is done using trial and error strategy, starting every time from zero and retrying with the next index until insertion succeeds. With large number of already added properties this process takes huge amount of time (O(n^2) complexity). Some architectures (like ARM) use very large amount of IRQ pins in interrupt controller models. This flaw makes machine startup extremely slow (~20 seconds for ARM64 with 32 CPUs). This patch decreases this time down to ~10 seconds. Also in qdev_init_gpio_out_named() memset() is now called only once for the whole array instead of per-cell cleaning Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-18loader: Fix memory_region_init_resizeable_ram() error handlingMarkus Armbruster
Commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place. The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The previous commit fixed up uses of memory_region_init_ram(). One of them was replaced by memory_region_init_resizeable_ram() [sic!] in commit a166614, so Coccinelle missed it. Fix it up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-4-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-10xen, gfx passthrough: basic graphics passthrough supportTiejun Chen
basic gfx passthrough support: - add a vga type for gfx passthrough - register/unregister legacy VGA I/O ports and MMIOs for passthrough GFX Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-07-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,virtio: fixes for 2.4 pc and virtio changes, bugfixes only. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3 Revert "virtio-net: enable virtio 1.0" virtio-pci: don't crash on illegal length qdev: fix 64 bit properties Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-13qdev: fix 64 bit propertiesCornelia Huck
64 bit props used 32 bit callbacks in two places, leading to broken feature bits on virtio (example: got 0x31000000000006d4 which is obviously bogus). Fix this. Fixes: fdba6d96 ("qdev: add 64bit properties") Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Bugfixes and Daniel Berrange's crypto library. # gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: ossaudio: fix memory leak ui: convert VNC to use generic cipher API block: convert qcow/qcow2 to use generic cipher API ui: convert VNC websockets to use crypto APIs block: convert quorum blockdrv to use crypto APIs crypto: add a nettle cipher implementation crypto: add a gcrypt cipher implementation crypto: introduce generic cipher API & built-in implementation crypto: move built-in D3DES implementation into crypto/ crypto: move built-in AES implementation into crypto/ crypto: introduce new module for computing hash digests vl: move rom_load_all after machine init done Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-07vl: move rom_load_all after machine init doneEric Auger
On ARM, commit ac9d32e39664e060cd1b538ff190980d57ad69e4 postponed the memory preparation for boot until the machine init done notifier. This has for consequence to insert ROM at machine init done time. However the rom_load_all function stayed called before the ROM are inserted. As a consequence the rom_load_all function does not do everything it is expected to do, on ARM. It currently registers the ROM reset notifier but does not iterate through the registered ROM list. the isrom field is not set properly. This latter is used to report info in the monitor and also to decide whether the rom->data can be freed on ROM reset notifier. To fix that regression the patch moves the rom_load_all call after machine init done. We also take the opportunity to rename the rom_load_all function into rom_check_and_resgister_reset() and integrate the rom_load_done in it. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1434470874-22573-1-git-send-email-eric.auger@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06sysbus: add irq_routing_notifierEric Auger
Add a new connect_irq_notifier notifier in the SysBusDeviceClass. This notifier, if populated, is called after sysbus_connect_irq. This mechanism is used to setup VFIO signaling once VFIO platform devices get attached to their platform bus, on a machine init done notifier. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Vikram Sethi <vikrams@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-26Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci fixes, enhancements Almost exclusively bugfixes, though in this case, we are adding functionality to the pxb in order to make OVMF work on it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: Fix glib_subprocess test hw/pci-bridge: format special OFW unit address for PXB host hw/core: explicit OFW unit address callback for SysBusDeviceClass hw/pci-bridge: disable SHPC in PXB hw/pci-bridge: introduce "shpc" property hw/pci: introduce shpc_present() helper function hw/pci-bridge: add macro for "msi" property hw/pci-bridge: add macro for "chassis_nr" property hw/pci-bridge: expose _test parameter in SHPC_VMSTATE() migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST() add pci-bridge-seat pc: cleanup and convert TMP ACPI device description to AML API MAINTAINERS: add ACPI entry vhost: correctly pass error to caller in vhost_dev_enable_notifiers() balloon: add a feature bit to let Guest OS deflate balloon on oom qdev: fix OVERFLOW_BEFORE_WIDEN virito-pci: fix OVERRUN problem Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-28 18:12:20 +0000