aboutsummaryrefslogtreecommitdiff
path: root/hw/char
AgeCommit message (Collapse)Author
2016-10-24char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau
This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: rename some frontend functionsMarc-André Lureau
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by frontend, so use qemu_chr_fe prefix. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remaining switch to CharBackend in frontendMarc-André Lureau
Similar to previous change, for the remaining CharDriverState front ends users. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace PROP_CHR with CharBackendMarc-André Lureau
Store the property in a CharBackend instead of CharDriverState*. This also replace systematically chr by chr.chr to access the CharDriverState*. The following patches will replace it with calls to qemu_chr_fe CharBackend functions. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove init callbackMarc-André Lureau
The CharDriverState.init() callback is no longer set since commit a61ae7f88ce and thus unused. The only user, the malta FGPA display has been converted to use an event "opened" callback instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24sun4uv: fix serial initialization regressionMarc-André Lureau
Since commit b6607a1a204d, serial_hds_isa_init() was introduced to factor out serial_isa_init() loops. However, sun4uv shouldn't start from 0 when there is a mm serial on 0 already. Add a "from" argument to serial_hds_isa_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-5-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: serial: check divider value against baud basePrasad J Pandit
16550A UART device uses an oscillator to generate frequencies (baud base), which decide communication speed. This speed could be changed by dividing it by a divider. If the divider is greater than the baud base, speed is set to zero, leading to a divide by zero error. Add check to avoid it. Reported-by: Huawei PSIRT <psirt@huawei.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <1476251888-20238-1-git-send-email-ppandit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-17hw/char/pl011: Add trace eventsPeter Maydell
Add some trace events for the pl011 UART model. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1476294876-12340-5-git-send-email-peter.maydell@linaro.org
2016-10-10virtio: cleanup VMSTATE_VIRTIO_DEVICEHalil Pasic
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone, so we can get rid of the conditionals, and the old macro. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: convert VMSTATE_VIRTIO_DEVICEHalil Pasic
Use the new VMSTATE_VIRTIO_DEVICE macro. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: add missing virtio_detach_element() callStefan Hajnoczi
Ports enter a "throttled" state when writing to the chardev would block. The current output VirtQueueElement is kept around until the chardev becomes writable again. There are several places in the virtio-serial lifecycle where the VirtQueueElement should be thrown away. For example, if the virtio device is reset then virtqueue elements are no longer valid. This patch adds the discard_throttle_data() function to unmap the scatter-gather list and decrement vq->inuse. This ensures that the VirtQueueElement is freed properly. Cc: amit.shah@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: enable virtio console emergency write featureSascha Silbe
Add support for enabling the virtio 1.0 "emergency write" (VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced the plumbing required for this; now we expose the virtio feature to the guest. The feature is disabled for compatibility machines to avoid exposing a new feature to existing guests. As required by the virtio 1.0 spec, the emergency write functionality is available to the guest even if the guest doesn't negotatiate the feature, as well as before feature negotation. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10virtio-serial: add plumbing for virtio console emergency write supportSascha Silbe
Add the infrastructure required for the virtio 1.0 "emergency write" (VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the size of the configuration area, guests will not be able to actually make use of this without further patches. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-13hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_allDaniel P. Berrange
The qemu_chr_fe_write method will return -1 on EAGAIN if the chardev backend write would block. Almost no callers of the qemu_chr_fe_write() method check the return value, instead blindly assuming data was successfully sent. In most cases this will lead to silent data loss on interactive consoles, but in some cases (eg RNG EGD) it'll just cause corruption of the protocol being spoken. We unfortunately can't fix the virtio-console code, due to a bug in the Linux guest drivers, which would cause the entire Linux kernel to hang if we delay processing of the incoming data in any way. Fixing this requires first fixing the guest driver to not hold spinlocks while writing to the hvc device backend. Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13sclpconsolelm: remove bogus check for -EAGAINDaniel P. Berrange
The write_console_data() method in sclpconsole-lm.c checks whether the return value of qemu_chr_fe_write() has the value of -EAGAIN and if so then increments the buffer offset by the value of EAGAIN. Fortunately qemu_chr_fe_write() will never return EAGAIN directly, rather it returns -1 with errno set to EAGAIN, so this broken code path was not reachable. The behaviour on EAGAIN was stil bad though, causing the write_console_data() to busy_wait repeatedly calling qemu_chr_fe_write() with no sleep between iters. Just remove all this loop logic and replace with a call to qemu_chr_fe_write_all(). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08portio: keep references on portioMarc-André Lureau
The isa_register_portio_list() function allocates ioports data/state. Let's keep the reference to this data on some owner. This isn't enough to fix leaks, but at least, ASAN stops complaining of direct leaks. Further cleanup would require calling portio_list_del/destroy(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-11virtio-console: set frontend open permanently for console devsDaniel P. Berrange
The virtio-console.c file handles both serial consoles and interactive consoles, since they're backed by the same device model. Since serial devices are expected to be reliable and need to notify the guest when the backend is opened or closed, the virtio-console.c file wires up support for chardev events. This affects both serial consoles and interactive consoles, using a network connection based chardev backend such as 'socket', but not when using a PTY based backend or plain 'file' backends. When the host side is not connected the handle_output() method in virtio-serial-bus.c will drop any data sent by the guest, before it even reaches the virtio-console.c code. This means that if the chardev has a logfile configured, the data will never get logged. Consider for example, configuring a x86_64 guest with a plain UART serial port -chardev socket,id=charserial1,host=127.0.0.1,port=9001,server,nowait,logfile=console1.log,logappend=on -device isa-serial,chardev=charserial1,id=serial1 vs a s390 guest which has to use the virtio-console port -chardev socket,id=charconsole1,host=127.0.0.1,port=9000,server,nowait,logfile=console2.log,logappend=on -device virtconsole,chardev=charconsole1,id=console1 The isa-serial one gets data written to the log regardless of whether a client is connected, while the virtioconsole one only gets data written to the log when a client is connected. There is no need for virtio-serial-bus.c to aggressively drop the data for console devices, as the chardev code is prefectly capable of discarding the data itself. So this patch changes virtconsole devices so that they are always marked as having the host side open. This ensures that the guest OS will always send any data it has (Linux virtio-console hvc driver actually ignores the host open state and sends data regardless, but we should not rely on that), and also prevents the virtio-serial-bus code prematurely discarding data. The behaviour of virtserialport devices is *not* changed, only virtconsole, because for the former, it is important that the guest OSknow exactly when the host side is opened / closed so it can do any protocol re-negotiation that may be required. Fixes bug: https://bugs.launchpad.net/qemu/+bug/1599214 Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1470241360-3574-2-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-21virtio-serial: Wrap in vmstateDr. David Alan Gilbert
Forcibly convert it to a vmstate wrapper; proper conversion comes later. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21virtio-serial: Remove old migration version supportDr. David Alan Gilbert
virtio-serial-bus has had version 3 since 37f95bf3d0 in 0.13-rc0; it's time to clean it up a bit. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29serial: reinstate watch after migrationPaolo Bonzini
Otherwise, a serial port can get stuck if it is migrated while flow control is in effect. Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29serial: remove watch on resetPaolo Bonzini
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0, which is invalid and causes an assertion failure. Reported-by: Bret Ketchum <bcketchum@gmail.com> Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29char: change qemu_chr_fe_add_watch to return unsignedPaolo Bonzini
g_source_attach can return any value between 1 and UINT_MAX if you let QEMU run long enough. However, qemu_chr_fe_add_watch can also return a negative errno value when the device is disconnected or does not support chr_add_watch. Change it to return zero to avoid overloading these values. Fix the cadence_uart which asserts in this case (easily obtained with "-serial pty"). Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29serial: separate serial_xmit and serial_watch_cbPaolo Bonzini
serial_xmit starts transmission of whatever is in the transmitter register, THR or FIFO; serial_watch_cb is a wrapper around it and is only used as a qemu_chr_fe_add_watch callback. Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29serial: simplify tsr_retry resetPaolo Bonzini
Move common code outside the if, and reset tsr_retry even in loopback mode. Right now it cannot become non-zero, but it will be possible as soon as we start respecting the baud rate. Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29serial: make tsr_retry unsignedPaolo Bonzini
It can never become negative; reflect this in the type of the field and simplify the conditions. Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27cadence_uart: Protect against transmit errorsAlistair Francis
If qemu_chr_fe_write() returns an error (represented by a negative number) we should skip incrementing the count and initiating a memmove(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 667e5dc534d33338fcfc2471e5aa32fe7cbd13dc.1466546703.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Mon 20 Jun 2016 21:29:27 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: (42 commits) trace: split out trace events for linux-user/ directory trace: split out trace events for qom/ directory trace: split out trace events for target-ppc/ directory trace: split out trace events for target-s390x/ directory trace: split out trace events for target-sparc/ directory trace: split out trace events for net/ directory trace: split out trace events for audio/ directory trace: split out trace events for ui/ directory trace: split out trace events for hw/alpha/ directory trace: split out trace events for hw/arm/ directory trace: split out trace events for hw/acpi/ directory trace: split out trace events for hw/vfio/ directory trace: split out trace events for hw/s390x/ directory trace: split out trace events for hw/pci/ directory trace: split out trace events for hw/ppc/ directory trace: split out trace events for hw/9pfs/ directory trace: split out trace events for hw/i386/ directory trace: split out trace events for hw/isa/ directory trace: split out trace events for hw/sd/ directory trace: split out trace events for hw/sparc/ directory ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20trace: split out trace events for hw/char/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/char/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-9-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20milkymist: update specification URLsMichael Walle
The old milkymist.org domain just forwards to mm-labs.hk nowadays. I've created a mirror of the documents. Signed-off-by: Michael Walle <michael@walle.cc>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-06hw/char: QOM'ify escc.c (fix)xiaoqiang zhao
The previous commit e7c9136977cb99c6eb52c9139f7b8d8b5fa87db9 (hw/char: QOM'ify escc.c) cause qemu-system-ppc/ppc64 OpenBIOS to freeze on startup, this commit fix it. Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <1464767898-30526-1-git-send-email-zxq_yx_007@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-06hw/char: QOM'ify xilinx_uartlite modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * create xilinx_uartlite_create wrapper function to create xilinx_uartlite device * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify stm32f2xx_usart modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify digic-uart modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify cadence_uart modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * create cadence_uart_create wrapper function to create cadence_uart_device * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify pl011 modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * add pl011_create wrapper function to create pl011 uart device * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-29hw/char: QOM'ify milkymist-uart.cxiaoqiang zhao
drop the qemu_char_get_next_serial and use chardev prop instead Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1464158344-12266-6-git-send-email-zxq_yx_007@163.com> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29hw/char: QOM'ify lm32_uart.cxiaoqiang zhao
* Drop the old SysBus init function and use instance_init * Call qemu_chr_add_handlers in the realize callback * Use qdev chardev prop instead of qemu_char_get_next_serial * Add lm32_uart_create function to create lm32 uart device Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1464158344-12266-5-git-send-email-zxq_yx_007@163.com> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29hw/char: QOM'ify lm32_juart.cxiaoqiang zhao
* Drop the old SysBus init function * Call qemu_chr_add_handlers in the realize callback * Use qdev chardev prop instead of qemu_char_get_next_serial Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1464158344-12266-4-git-send-email-zxq_yx_007@163.com> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29hw/char: QOM'ify etraxfs_ser.cxiaoqiang zhao
* Drop the old SysBus init function and use instance_init * Call qemu_chr_add_handlers in the realize callback * Use qdev chardev prop instead of qemu_char_get_next_serial * Add etraxfs_ser_create function to create etraxfs serial device Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1464158344-12266-3-git-send-email-zxq_yx_007@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29hw/char: QOM'ify escc.cxiaoqiang zhao
* Drop the old SysBus init function and use instance_init * Call qemu_chr_add_handlers in the realize callback Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18ipack: Update e-mail addressAlberto Garcia
I'm not really using the old one anymore. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-17hw/char: QOM'ify sclpconsole.cxiaoqiang zhao
Drop the DO_UPCAST macro Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1459237645-17227-7-git-send-email-zxq_yx_007@163.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-05-17hw/char: QOM'ify sclpconsole-lm.cxiaoqiang zhao
Drop the DO_UPCAST macro Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1459237645-17227-6-git-send-email-zxq_yx_007@163.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-04-19cadence_uart: bounds check write offsetMichael S. Tsirkin
cadence_uart_init() initializes an I/O memory region of size 0x1000 bytes. However in uart_write(), the 'offset' parameter (offset within region) is divided by 4 and then used to index the array 'r' of size CADENCE_UART_R_MAX which is much smaller: (0x48/4). If 'offset>>=2' exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory write where the offset and the value are controlled by guest. This will corrupt QEMU memory, in most situations this causes the vm to crash. Fix by checking the offset against the array size. Cc: qemu-stable@nongnu.org Reported-by: 李强 <liqiang6-s@360.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20160418100735.GA517@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 22:12:18 +0000