aboutsummaryrefslogtreecommitdiff
path: root/hw/block/nvme.c
AgeCommit message (Collapse)Author
2020-06-17hw/block/nvme: refactor nvme_addr_readKlaus Jensen
Pull the controller memory buffer check to its own function. The check will be used on its own in later patches. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-7-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: use constants in identifyKlaus Jensen
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-6-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: move device parameters to separate structKlaus Jensen
Move device configuration parameters to separate struct to make it explicit what is configurable and what is set internally. Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200609190333.59390-5-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: remove superfluous breaksKlaus Jensen
These break statements was left over when commit 3036a626e9ef ("nvme: add Get/Set Feature Timestamp support") was merged. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-4-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: rename trace events to pci_nvmeKlaus Jensen
Change the prefix of all nvme device related trace events to 'pci_nvme' to not clash with trace events from the nvme block driver. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-3-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: fix pci doorbell size calculationKlaus Jensen
The size of the BAR is 0x1000 (main registers) + 8 bytes for each queue. Currently, the size of the BAR is calculated like so: n->reg_size = pow2ceil(0x1004 + 2 * (n->num_queues + 1) * 4); Since the 'num_queues' parameter already accounts for the admin queue, this should in any case not need to be incremented by one. Also, the size should be initialized to (0x1000). n->reg_size = pow2ceil(0x1000 + 2 * n->num_queues * 4); This, with the default value of num_queues (64), we will set aside room for 1 admin queue and 63 I/O queues (4 bytes per doorbell, 2 doorbells per queue). Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-2-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-05hw/block: Let the NVMe emulated device be target-agnosticPhilippe Mathieu-Daudé
Now than the non-target specific memory_region_msync() function is available, use it to make this device target-agnostic. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20200508062456.23344-4-philmd@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-15Drop more @errp parameters after previous commitMarkus Armbruster
Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
2020-04-30nvme: introduce PMR support from NVMe 1.4 specAndrzej Jakowski
This patch introduces support for PMR that has been defined as part of NVMe 1.4 spec. User can now specify a pmrdev option that should point to HostMemoryBackend. pmrdev memory region will subsequently be exposed as PCI BAR 2 in emulated NVMe device. Guest OS can perform mmio read and writes to the PMR region that will stay persistent across system reboot. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200330164656.9348-1-andrzej.jakowski@linux.intel.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-24nvme: do not advertise support for unsupported arbitration mechanismKlaus Birkelund Jensen
The device mistakenly reports that the Weighted Round Robin with Urgent Priority Class arbitration mechanism is supported. It is not. Signed-off-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com> Message-id: 20190606092530.14206-1-klaus@birkelund.eu Acked-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-04nvme: add Get/Set Feature Timestamp supportKenneth Heitke
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com> Reviewed-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20nvme: fix copy direction in DMA reads going to CMBKlaus Birkelund Jensen
`nvme_dma_read_prp` erronously used `qemu_iovec_*to*_buf` instead of `qemu_iovec_*from*_buf` when the request involved the controller memory buffer. Signed-off-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com> Reviewed-by: Kenneth Heitke <kenneth.heitke@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12nvme: fix write zeroes offset and countKeith Busch
The implementation used blocks units rather than the expected bytes. Fixes: c03e7ef12a9 ("nvme: Implement Write Zeroes") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-01-31nvme: use pci_dev directly in nvme_realizeLi Qiang
There is no need to make another reference. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190120055558.32984-4-liq3ea@163.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31nvme: ensure the num_queues is not zeroLi Qiang
When it is zero, it causes segv. Using following command: "-drive file=//home/test/test1.img,if=none,id=id0 -device nvme,drive=id0,serial=test,num_queues=0" causes following Backtrack: Thread 4 "qemu-system-x86" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffe9735700 (LWP 30952)] 0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0) at hw/block/nvme.c:825 825 if (unlikely(n->cq[0])) { (gdb) bt 0 0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0) at hw/block/nvme.c:825 1 0x0000555555a7af7f in nvme_write_bar (n=0x5555577473f0, offset=20, data=4587521, size=4) at hw/block/nvme.c:969 2 0x0000555555a7b81a in nvme_mmio_write (opaque=0x5555577473f0, addr=20, data=4587521, size=4) at hw/block/nvme.c:1163 3 0x0000555555869236 in memory_region_write_accessor (mr=0x555557747cd0, addr=20, value=0x7fffe97320f8, size=4, shift=0, mask=4294967295, attrs=...) at /home/test/qemu1/qemu/memory.c:502 4 0x0000555555869446 in access_with_adjusted_size (addr=20, value=0x7fffe97320f8, size=4, access_size_min=2, access_size_max=8, access_fn=0x55555586914d <memory_region_write_accessor>, mr=0x555557747cd0, attrs=...) at /home/test/qemu1/qemu/memory.c:568 5 0x000055555586c479 in memory_region_dispatch_write (mr=0x555557747cd0, addr=20, data=4587521, size=4, attrs=...) at /home/test/qemu1/qemu/memory.c:1499 6 0x00005555558030af in flatview_write_continue (fv=0x7fffe0061130, addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4, addr1=20, l=4, mr=0x555557747cd0) at /home/test/qemu1/qemu/exec.c:3234 7 0x00005555558031f9 in flatview_write (fv=0x7fffe0061130, addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4) at /home/test/qemu1/qemu/exec.c:3273 8 0x00005555558034ff in address_space_write ( ---Type <return> to continue, or q <return> to quit--- as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4) at /home/test/qemu1/qemu/exec.c:3363 9 0x0000555555803550 in address_space_rw ( as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4, is_write=true) at /home/test/qemu1/qemu/exec.c:3374 10 0x00005555558884a1 in kvm_cpu_exec (cpu=0x555556920e40) at /home/test/qemu1/qemu/accel/kvm/kvm-all.c:2031 11 0x000055555584cd9d in qemu_kvm_cpu_thread_fn (arg=0x555556920e40) at /home/test/qemu1/qemu/cpus.c:1281 12 0x0000555555dbaf6d in qemu_thread_start (args=0x5555569438a0) at util/qemu-thread-posix.c:502 13 0x00007ffff5dc86db in start_thread (arg=0x7fffe9735700) at pthread_create.c:463 14 0x00007ffff5af188f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190120055558.32984-3-liq3ea@163.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31nvme: use TYPE_NVME instead of constant stringLi Qiang
Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190120055558.32984-2-liq3ea@163.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-11-27nvme: Fix spurious interruptsKeith Busch
The code had asserted an interrupt every time it was requested to check for new completion queue entries.This can result in spurious interrupts seen by the guest OS. Fix this by asserting an interrupt only if there are un-acknowledged completion queue entries available. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-22nvme: fix bug with PCI IRQ pins on teardownLogan Gunthorpe
When the submission and completion queues are being torn down the IRQ will be asserted for the completion queue when the submsission queue is deleted. Then when the completion queue is deleted it stays asserted. Thus, on systems that do not use MSI, no further interrupts can be triggered on the host. Linux sees this as a long delay when unbinding the nvme device. Eventually the interrupt timeout occurs and it continues. To fix this we ensure we deassert the IRQ for a CQ when it is deleted. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-22nvme: fix CMB endianness confusionPaolo Bonzini
The CMB is marked as DEVICE_LITTLE_ENDIAN, so the data must be read/written as if it was little-endian output (in the case of big endian, we get two swaps, one in the memory core and one in nvme.c). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-22Revert "nvme: fix oob access issue(CVE-2018-16847)"Kevin Wolf
This reverts commit 5e3c0220d7e4f0361c4d36c697a8842f2b583402. We have a better fix commited for this now. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-22nvme: fix out-of-bounds access to the CMBPaolo Bonzini
Because the CMB BAR has a min_access_size of 2, if you read the last byte it will try to memcpy *2* bytes from n->cmbuf, causing an off-by-one error. This is CVE-2018-16847. Another way to fix this might be to register the CMB as a RAM memory region, which would also be more efficient. However, that might be a change for big-endian machines; I didn't think this through and I don't know how real hardware works. Add a basic testcase for the CMB in case somebody does this change later on. Cc: Keith Busch <keith.busch@intel.com> Cc: qemu-block@nongnu.org Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Tested-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-22nvme: call blk_drain in NVMe reset code to avoid lockupsIgor Druzhinin
When blk_flush called in NVMe reset path S/C queues are already freed which means that re-entering AIO handling loop having some IO requests unfinished will lockup or crash as their SG structures being potentially reused. Call blk_drain before freeing the queues to avoid this nasty scenario. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-19nvme: fix oob access issue(CVE-2018-16847)Li Qiang
Currently, the nvme_cmb_ops mr doesn't check the addr and size. This can lead an oob access issue. This is triggerable in the guest. Add check to avoid this issue. Fixes CVE-2018-16847. Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-12nvme: free cmbuf in nvme_exitLi Qiang
This avoid a memory leak in unhotplug nvme device. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-12nvme: don't unref ctrl_mem when device unrealizedLi Qiang
Currently, when hotplug/unhotplug nvme device, it will cause an assert in object.c. Following is the backtrack: ERROR:qom/object.c:981:object_unref: assertion failed: (obj->ref > 0) Thread 2 "qemu-system-x86" received signal SIGABRT, Aborted. [Switching to Thread 0x7fffcbd32700 (LWP 18844)] 0x00007fffdb9e4fff in raise () from /lib/x86_64-linux-gnu/libc.so.6 (gdb) bt /lib/x86_64-linux-gnu/libglib-2.0.so.0 /lib/x86_64-linux-gnu/libglib-2.0.so.0 qom/object.c:981 /home/liqiang02/qemu-upstream/qemu/memory.c:1732 /home/liqiang02/qemu-upstream/qemu/memory.c:285 util/qemu-thread-posix.c:504 /lib/x86_64-linux-gnu/libpthread.so.0 This is caused by memory_region_unref in nvme_exit. Remove it to make the PCIdevice refcount correct. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-08-15block: Remove deprecated -drive option serialKevin Wolf
This reinstates commit b0083267444a5e0f28391f6c2831a539f878d424, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive option serial"Cornelia Huck
This reverts commit b0083267444a5e0f28391f6c2831a539f878d424. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-02hw/block: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-14-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-29hw/block/nvme: add optional parameter num_queues for nvme deviceWeiping Zhang
Add an optional paramter num_queues for device, and set it to 64 by default. Signed-off-by: Weiping Zhang <zhangweiping@didichuxing.com> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Remove deprecated -drive option serialKevin Wolf
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-01hw/block/nvme: Include "qemu/cutils.h" directly in the source filePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20180528232719.4721-16-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-23hw/block: Fix pin-based interrupt behaviour of NVMeHikaru Nishida
Pin-based interrupt of NVMe controller did not work properly because using an obsolated function pci_irq_pulse(). To fix this, change to use pci_irq_assert() / pci_irq_deassert() instead of pci_irq_pulse(). Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22nvme: Add tracingDoug Gale
Add trace output for commands, errors, and undefined behavior. Add guest error log output for undefined behavior. Report invalid undefined accesses to MMIO. Annotate unlikely error checks with unlikely. Signed-off-by: Doug Gale <doug16k@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-19hw/block: Use errp directly rather than local_errMao Zhongyi
[Drop virtio_blk_data_plane_create() change that misinterprets return value when the virtio transport does not support dataplane. --Stefan] Cc: John Snow <jsnow@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: e77848d3735ba590f23ffbf8094379c646c33d79.1511317952.git.maozy.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19hw/block/nvme: Convert to realizeMao Zhongyi
Convert nvme_init() to realize and rename it to nvme_realize(). Cc: John Snow <jsnow@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Message-id: 2882e72d795e04cbe2120f569d551aef2467ac60.1511317952.git.maozy.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-10-15pci: Add INTERFACE_PCIE_DEVICE to all PCIe devicesEduardo Habkost
Change all devices that set is_express=1 to implement INTERFACE_PCIE_DEVICE. Cc: Keith Busch <keith.busch@intel.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Dmitry Fleytman <dmitry@daynix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: qemu-block@nongnu.org Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-29nvme: Fix get/set number of queues feature, againDan Aloni
The number of queues that should be return by the admin command should: 1) Only mention the number of non-admin queues. 2) It is zero-based, meaning that '0 == one non-admin queue', '1 == two non-admin queues', and so forth. Because our `num_queues` means the number of queues _plus_ the admin queue, then the right calculation for the number returned from the admin command is `num_queues - 2`, combining the two requirements mentioned. The issue was discovered by reducing num_queues from 64 to 8 and running a Linux VM with an SMP parameter larger than that (e.g. 22). It tries to utilize all queues, and therefore fails with an invalid queue number when trying to queue I/Os on the last queue. Signed-off-by: Dan Aloni <dan@kernelim.com> CC: Alex Friedman <alex@e8storage.com> CC: Keith Busch <keith.busch@intel.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-26nvme: Add support for Read Data and Write Data in CMBs.Stephen Bates
Add the ability for the NVMe model to support both the RDS and WDS modes in the Controller Memory Buffer. Although not currently supported in the upstreamed Linux kernel a fork with support exists [1] and user-space test programs that build on this also exist [2]. Useful for testing CMB functionality in preperation for real CMB enabled NVMe devices (coming soon). [1] https://github.com/sbates130272/linux-p2pmem [2] https://github.com/sbates130272/p2pmem-test Signed-off-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-26nvme: Add support for Controller Memory BuffersStephen Bates
Implement NVMe Controller Memory Buffers (CMBs) which were added in version 1.2 of the NVMe Specification. This patch adds an optional argument (cmb_size_mb) which indicates the size of the CMB (in MB). Currently only the Submission Queue Support (SQS) is enabled which aligns with the current Linux driver for NVMe. Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11nvme: Implement Write ZeroesChristoph Hellwig
Signed-off-by: Keith Busch <keith.busch@intel.com> [hch: ported over from qemu-nvme.git to mainline] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28hw/block: Request permissionsKevin Wolf
This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-01pci: Convert msix_init() to Error and fix callersCao jin
msix_init() reports errors with error_report(), which is wrong when it's used in realize(). The same issue was fixed for msi_init() in commit 1108b2f. In order to make the API change as small as possible, leave the return value check to later patch. For some devices(like e1000e, vmxnet3, nvme) who won't fail because of msix_init's failure, suppress the error report by passing NULL error object. Bonus: add comment for msix_init. CC: Jiri Pirko <jiri@resnulli.us> CC: Gerd Hoffmann <kraxel@redhat.com> CC: Dmitry Fleytman <dmitry@daynix.com> CC: Jason Wang <jasowang@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Hannes Reinecke <hare@suse.de> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-28hw/block/nvme: Simplify if-statements a little bitThomas Huth
The condition '!A || (A && B)' is equivalent to '!A || B'. Buglink: https://bugs.launchpad.net/qemu/+bug/1464611 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-27dma-helpers: explicitly pass alignment into DMA helpersMark Cave-Ayland
The hard-coded default alignment is BDRV_SECTOR_SIZE, however this is not necessarily the case for all platforms. Use this as the default alignment for all current callers. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Message-id: 1476445266-27503-2-git-send-email-mark.cave-ayland@ilande.co.uk Signed-off-by: John Snow <jsnow@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 17:57:01 +0000