aboutsummaryrefslogtreecommitdiff
path: root/hw/block/block.c
AgeCommit message (Collapse)Author
2019-03-26pflash: Require backend size to match device, improve errorsMarkus Armbruster
We reject undersized backends with a rather enigmatic "failed to read the initial flash content" error. For instance: $ qemu-system-ppc64 -S -display none -M sam460ex -drive if=pflash,format=raw,file=eins.img qemu-system-ppc64: Initialization of device cfi.pflash02 failed: failed to read the initial flash content We happily accept oversized images, ignoring their tail. Throwing away parts of firmware that way is pretty much certain to end in an even more enigmatic failure to boot. Require the backend's size to match the device's size exactly. Report mismatch like this: qemu-system-ppc64: Initialization of device cfi.pflash01 failed: device requires 1048576 bytes, block backend provides 512 bytes Improve the error for actual read failures to "can't read block backend". To avoid duplicating even more code between the two pflash device models, do all that in new helper blk_check_size_and_read_all(). The error reporting can still be confusing. For instance: qemu-system-ppc64 -S -display none -M taihu -drive if=pflash,format=raw,file=eins.img -drive if=pflash,unit=1,format=raw,file=zwei.img qemu-system-ppc64: Initialization of device cfi.pflash02 failed: device requires 2097152 bytes, block backend provides 512 bytes Leaves the user guessing which of the two -drive is wrong. Mention the issue in a TODO comment. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190319163551.32499-2-armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-08-15block: Remove deprecated -drive option serialKevin Wolf
This reinstates commit b0083267444a5e0f28391f6c2831a539f878d424, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-08-15block: Remove deprecated -drive geometry optionsKevin Wolf
This reinstates commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive geometry options"Cornelia Huck
This reverts commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive option serial"Cornelia Huck
This reverts commit b0083267444a5e0f28391f6c2831a539f878d424. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Remove deprecated -drive option serialKevin Wolf
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15block: Remove deprecated -drive geometry optionsKevin Wolf
The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2017-12-19hw/block: Fix the return typeMao Zhongyi
When the function no success value to transmit, it usually make the function return void. It has turned out not to be a success, because it means that the extra local_err variable and error_propagate() will be needed. It leads to cumbersome code, therefore, transmit success/ failure in the return value is worth. So fix the return type of blkconf_apply_backend_options(), blkconf_geometry() and virtio_blk_data_plane_create() to avoid it. Cc: John Snow <jsnow@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: ac0edc1fc70c4457e5cec94405eb7d1f89f9c2c1.1511317952.git.maozy.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-28hw/block: Introduce share-rw qdev propertyKevin Wolf
By default, don't allow another writer for block devices that are attached to a guest device. For the cases where this setup is intended (e.g. using a cluster filesystem on the disk), the new option can be used to allow it. This change affects only devices using DEFINE_BLOCK_PROPERTIES(). Devices directly using DEFINE_PROP_DRIVE() still accept writers unconditionally. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28hw/block: Request permissionsKevin Wolf
This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-13block/qdev: Allow configuring rerror/werror with qdev propertiesKevin Wolf
The rerror/werror policies are implemented in the devices, so that's where they should be configured. In comparison to the old options in -drive, the qdev properties are only added to those devices that actually support them. If the option isn't given (or "auto" is specified), the setting of the BlockBackend is used for compatibility with the old options. For block jobs, "auto" is the same as "enospc". Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-13block/qdev: Allow configuring WCE with qdev propertiesKevin Wolf
As cache.writeback is a BlockBackend property and as such more related to the guest device than the BlockDriverState, we already removed it from the blockdev-add interface. This patch adds the new way to set it, as a qdev property of the corresponding guest device. For example: -drive if=none,file=test.img,node-name=img -device ide-hd,drive=img,write-cache=off Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-20block: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10BlockConf: Call backend functions to detect geometry and blocksizesEkaterina Tumanova
geometry: hd_geometry_guess function autodetects the drive geometry. This patch adds a block backend call, that probes the backing device geometry. If the inner driver method is implemented and succeeds (currently only for DASDs), the blkconf_geometry will pass-through the backing device geometry. Otherwise will fallback to old logic. blocksize: This patch initializes blocksize properties to 0. In order to set the property a blkconf_blocksizes was introduced. If user didn't set physical or logical blocksize, it will retrieve its value from a driver (only succeeds for DASD), otherwise it will set default 512 value. The blkconf_blocksizes call was added to all users of BlkConf. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20blockdev: Fix blockdev-add not to create DriveInfoMarkus Armbruster
blockdev_init() always creates a DriveInfo, but only drive_new() fills it in. qmp_blockdev_add() leaves it blank. This results in a drive with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c. Board initialization code looking for IDE drive (0,0) can pick up one of these bogus drives. The QMP command has to execute really early to be visible. Not sure how likely that is in practice. Fix by creating DriveInfo in drive_new(). Block backends created by blockdev-add don't get one. Breaks the test for "has been created by qmp_blockdev_add()" in blockdev_mark_auto_del() and do_drive_del(), because it changes the value of dinfo && !dinfo->enable_auto_del from true to false. Simply test !dinfo instead. Leaves DriveInfo member enable_auto_del unused. Drop it. A few places assume a block backend always has a DriveInfo. Fix them up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-26block: Pass errp in blkconf_geometryFam Zheng
This allows us to pass error information to caller. Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>