aboutsummaryrefslogtreecommitdiff
path: root/hw/arm_sysctl.c
AgeCommit message (Collapse)Author
2011-11-28sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-14hw/arm_sysctl: Fix RESETCTL for realview-pb-a8 and -pbx-a9Jean-Christophe DUBOIS
Depending on the considered baseboard the bit used to reset the platform is different. Here is the list of considered Realview/Versatile platforms: Realview/Versatile AB for ARM926EJ-S: BOARD_ID = 0x100 = BOARD_ID_PB9 http://infocenter.arm.com/help/topic/com.arm.doc.dui0225d/CACCIFGI.html RealView Emulation Baseboard: BOARD_ID = 0x140 = BOARD_ID_EB No reset register RealView PB for Cortex-A8: BOARD_ID = 0x178 = BOARD_ID_PBA8 http://infocenter.arm.com/help/topic/com.arm.doc.dui0417d/BBACIGAD.html RealView PB for Cortex-A9: BOARD_ID = 0x182 = BOARD_ID_PBX http://infocenter.arm.com/help/topic/com.arm.doc.dui0440b/CACCHBFB.html Motherboard Express =C2=B5ATX: BOARD_ID = 0x190 = BOARD_ID_VEXPRESS No reset register Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-08-22arm_sysctl: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-17versatilepb: Implement SYS_CLCD mux control register bitsPeter Maydell
On the Versatile PB, PL110 graphics adaptor only natively supports 5551 pixel format; an external mux swaps bits around to allow RGB565 and BGR565, under the control of bits [1:0] in the SYS_CLCD system register. Implement these SYS_CLCD register bits, and use a gpio line to feed them out of the system register model, across the versatilepb board and into the pl110 so we can select the right format. This is necessary as recent Linux versatile kernels default to programming the CLCD and mux for 16 bit BGR rather than 16 bit RGB. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-07-23Correct spelling of licensedMatthew Fernandez
Correct typos of "licenced" to "licensed". Reviewed-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21Merge branch 'for-anthony' of git://github.com/bonzini/qemuAurelien Jarno
* 'for-anthony' of git://github.com/bonzini/qemu: remove qemu_get_clock add a generic scaling mechanism for timers change all other clock references to use nanosecond resolution accessors change all rt_clock references to use millisecond resolution accessors add more helper functions with explicit milli/nanosecond resolution
2011-03-21hw/arm_sysctl.c: Add the Versatile Express system registersPeter Maydell
Add support for the Versatile Express SYS_CFG registers, which provide a generic means of reading or writing configuration information from various parts of the board. We only implement shutdown and reset. Also make the RESETCTL register RAZ/WI on Versatile Express rather than reset the board. Other system registers are generally the same as Versatile and Realview. This includes a VMState version number bump for arm_sysctl, since we have new register state to preserve. It also adds sys_mci to the VMState while we're bumping the version number (an accidental omission from commit b50ff6f5). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-06hw/arm_sysctl.c: Wire MCI register MMC card status bits to GPIO inputsPeter Maydell
Implement some GPIO inputs which a board can connect up to set the MMC card status bits in the MCI register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20arm_sysctl: Implement save/restorePeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-13Realview/EB procid hacksPaul Brook
Guess core tile ID based on CPU type. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-11Fix ARM MCore secondary cpu bootPaul Brook
Make MPCore secondary cpu initialization work with the new reset handling. Also change the inital FLAG value from 3 to zero to match recent kenrels. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-14Fix Linux task preemption on Versatile boardDaniel Jacobowitz
Recent versions of the Linux kernel will not preempt CPU-intensive tasks unless the clock used by sched_clock() works. On -M versatilepb that's the 24MHz timer in the system controller. It's a very simple timer, so implement it. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-10qdev/prop: convert arm_sysctl.c to helper macros.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-16qdev: rework device properties.Gerd Hoffmann
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14ARM RealView sytem controller qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13Remove unnecessary trailing newlinesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01Change MMIO callbacks to use offsets, not absolute addresses.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-18Add statics and missing #includes for prototypes.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3683 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-11ARMv7 support.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3572 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-03Fix off-by-one memory region sizes.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2931 c046a42c-6fe2-441c-8c8c-71466251a162
2007-03-11ARM reabbot support (orginal patch by Aurelien Jarno).pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2476 c046a42c-6fe2-441c-8c8c-71466251a162
2006-09-23Add ARM RealView Emulation Baseboard.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2164 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 13:07:25 +0000