aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2024-03-08hw/arm/virt-acpi-build.c: Migrate SPCR creation to common locationSia Jee Heng
RISC-V should also generate the SPCR in a manner similar to ARM. Therefore, instead of replicating the code, relocate this function to the common AML build. Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240129021440.17640-2-jeeheng.sia@starfivetech.com> [ Changes by AF: - Add missing Language SPCR entry ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-07hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoCInès Varhol
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240305210444.310665-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm/stm32l4x5_soc.c: Use the RCC SysclkArnaud Minier
Now that we can generate reliable clock frequencies from the RCC, remove the hacky definition of the sysclk in the b_l475e_iot01a initialisation code and use the correct RCC clock. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeletonArnaud Minier
Add the necessary files to add a simple RCC implementation with just reads from and writes to registers. Also instantiate the RCC in the STM32L4x5_SoC. It is needed for accurate emulation of all the SoC clocks and timers. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2Rayhan Faizel
BCM2835 has three I2C controllers. All of them share the same interrupt line. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27Merge tag 'pull-target-arm-20240227-1' of ↵Peter Maydell
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Handle atomic updates of page tables entries in MMIO during PTW * Advertise Cortex-A53 erratum #843419 fix via REVIDR * MAINTAINERS: Cover hw/ide/ahci-allwinner.c with AllWinner A10 machine * misc: m48t59: replace qemu_system_reset_request() call with watchdog_perform_action() * misc: pxa2xx_timer: replace qemu_system_reset_request() call with watchdog_perform_action() * xlnx-versal-ospi: disable reentrancy detection for iomem_dac * sbsa-ref: Simplify init since PCIe is always enabled * stm32l4x5: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQs * pl031: Update last RTCLR value on write in case it's read back * block: m25p80: Add support of mt35xu02gbba * xlnx-versal-virt: Add machine property ospi-flash * reset: refactor system reset to be three-phase aware * new board model raspi4b # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXeAMEZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3syyD/4lJzzstbDIAsu94Z4Hi0So # CFLAMJFsPy3fMsU2IqVP+TDTyhUeMPebwfj7sQHUtQcXVh5i1/HlYgdUgXsnjGWQ # pc6BxycpW6uJWYb7Ma3CdSGS+hxEpQ+U8Qeijwqg0kAqhjNtrSIkTRQ4u8p8T+kN # dWtQzp7D15BpEVhWl/2dLWWJwV3H6TThmr1FbK5wl/c7hJzy2uaXqmmCvercU0Zo # 6ab3SnGyhaujdd/FsDvhnVEYqcmcO2p9UtSnGAbdfw0zsf4p8cS2Q6M9q4DHBFYn # 6Bt51DFP5D+114VpqRSXF2Lv9K8swjTgqhDld9vCoios6pS3LMwcTAcONUxE8JU+ # uD7kXTN/lv3atNEy4MTFkTeNtKgbYJJuPwWrDRNdbVXPwrEHGWN3+ZYISmuYb+p+ # XL2/7HeP7/qEVMW2d18+7OCriZwKiBRZRKUrtG7mQSBZEMetbhpA+mLcxAZT0FAl # 18O/mcvEJrrE7x6Bqyv96b8PE0/er5cVg/b/wrkKS8DL4NWU9bJSjJNRrvt9bvvl # jSzPGo4ngHlfO0OpurLoFOZCVxKWVXgaKkQ3pOz301nsDyhEndNLeCxrITac8G2Q # C/WQuMaeOoV1x7N2MzaCQmyRzy8yGkG9av0aI/8feobfV/Yg4wPsfhcEn/XQWXKv # NUJ4/z78FbJlI2JeDP2QSA== # =xaMv # -----END PGP SIGNATURE----- # gpg: Signature made Tue 27 Feb 2024 15:33:21 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240227-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) docs/system/arm: Add RPi4B to raspi.rst hw/misc/bcm2835_property: Add missed BCM2835 properties tests/avocado/boot_linux_console.py: Add Rpi4b boot tests hw/arm/bcm2838_peripherals: Add clock_isp stub hw/arm: Add memory region for BCM2837 RPiVid ASB hw/arm/raspi4b: Temporarily disable unimplemented rpi4b devices hw/arm: Introduce Raspberry PI 4 machine hw/arm: Add GPIO and SD to BCM2838 periph hw/gpio: Connect SD controller to BCM2838 GPIO hw/gpio: Implement BCM2838 GPIO functionality hw/gpio: Add BCM2838 GPIO stub hw/arm/bcm2838: Add GIC-400 to BCM2838 SoC hw/arm: Introduce BCM2838 SoC hw/arm/raspi: Split out raspi machine common part hw/arm/bcm2853_peripherals: Split out common part of peripherals hw/arm/bcm2836: Split out common part of BCM283X classes docs/devel/reset: Update to discuss system reset hw/core/machine: Use qemu_register_resettable for sysbus reset hw/core/reset: Implement qemu_register_reset via qemu_register_resettable hw/core/reset: Add qemu_{register, unregister}_resettable() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27Merge tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * Add support for UART0, in preparation of AST2700 models # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmXd2nMACgkQUaNDx8/7 # 7KErPBAAjKRmJQF9aMEgf7uqsPnJojAVumFe63NE9Gqnvy4MzgoZWfdSnLl2Ddba # im5IfR7MYv0tzJtqCVtz7o4JwXhhDwesWALQZBM/ms48aacPSNP+7Gn141yLuCCS # Vr8NBSIz156lSsnFGnRUArcQTDKjDp/1TLRiGcS8SDm/S4Nn++nur+T054EZgbKR # CMWDeavgzZRb9HPepvWDwqb9qs11hq5/onCqC886dVNznxEKAVYcd0FVbSn3OfDF # 2EPvKh+fxHlW37wcctlGPnbJK5rRvFi78yZf5utSt+mlVhyiEXjQJ6p8zBIh2w5A # NlsmUo/UYv1F41yC/vCFRR8KJ2wO5VW7zL6UCGMV6I9hxhu/Qw+FYqWdBbAZWsOO # GFOkFbe8zbJFXTr/W7P5upBlA7U1/B9VbRj71eu01dqT+n8OGsk8yfnWVs1SjpoD # 89ZIhpb7lSolQmjPPxrVyfUe3/8ncTx64+CZuAZjxPh/9HA8wDXwVRPtAbIvvGaZ # YPQ4Qmd4m6nAANAvTg2ufj19WT64XKwrQ6O3IkmGcn0BzHl08GFjru8IUp6rbduG # m6WqulL1Ej1PrYaiw5ktpJ4Fkoy6iEFXJOWfl3oTLp2KWE5VAohyRKI00AFnHiAC # frK+cxT4bqDtJR8QbNyJy5d3ZGZV1R6ZA0XjQ1jtb8ty2qISysw= # =gFeX # -----END PGP SIGNATURE----- # gpg: Signature made Tue 27 Feb 2024 12:49:55 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20240227' of https://github.com/legoater/qemu: aspeed: fix hardcode boot address 0 aspeed: introduce a new UART0 device name Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2838_peripherals: Add clock_isp stubSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Add memory region for BCM2837 RPiVid ASBSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-13-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/raspi4b: Temporarily disable unimplemented rpi4b devicesSergey Kambalin
This commit adds RPi4B device tree modifications: - disable pcie, rng200, thermal sensor and genet devices (they're going to be re-enabled in the following commits) - create additional memory region in device tree if RAM amount exceeds VC base address. Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-12-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Introduce Raspberry PI 4 machineSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-11-sergey.kambalin@auriga.com [PMM: Change name to 'raspi4b', not 'raspi4b-2g'] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Add GPIO and SD to BCM2838 periphSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-10-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2838: Add GIC-400 to BCM2838 SoCSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-6-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Introduce BCM2838 SoCSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-5-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/raspi: Split out raspi machine common partSergey Kambalin
Pre-setup for raspberry pi 4 introduction Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-4-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2853_peripherals: Split out common part of peripheralsSergey Kambalin
Pre-setup for BCM2838 introduction Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-3-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2836: Split out common part of BCM283X classesSergey Kambalin
Pre setup for BCM2838 introduction Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-2-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27arm: xlnx-versal-virt: Add machine property ospi-flashSai Pavan Boddu
This property allows users to change flash model on command line as below. ex: "-M xlnx-versal-virt,ospi-flash=mt35xu02gbba" Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Message-id: 20240220091721.82954-3-sai.pavan.boddu@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQsInès Varhol
Fixes: 52671f69f7a4 ("[PATCH v8 0/3] Add device STM32L4x5 EXTI") Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240220184145.106107-2-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/sbsa-ref: Simplify init since PCIe is always enabledMarcin Juszkiewicz
There is no point in checking do we have PCIe if first thing after check is adding PCIe card without checking. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240215153311.186772-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27aspeed: fix hardcode boot address 0Jamin Lin
In the previous design of ASPEED SOCs QEMU model, it set the boot address at "0" which was the hardcode setting for ast10x0, ast2600, ast2500 and ast2400. According to the design of ast2700, it has a bootmcu(riscv-32) which is used for executing SPL and initialize DRAM and copy u-boot image from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage. Then, CPUs(cortex-a35) execute u-boot, kernel and rofs. Currently, qemu not support emulate two CPU architectures at the same machine. Therefore, qemu will only support to emulate CPU(cortex-a35) side for ast2700 and the boot address is "0x4 00000000". Fixed hardcode boot address "0" for future models using a different mapping address. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-27aspeed: introduce a new UART0 device nameJamin Lin
The Aspeed datasheet refers to the UART controllers as UART1 - UART13 for the ast10x0, ast2600, ast2500 and ast2400 SoCs and the Aspeed ast2700 introduces an UART0 and the UART controllers as UART0 - UART12. To keep the naming in the QEMU models in sync with the datasheet, let's introduce a new UART0 device name and do the required adjustements. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - Kept original assert() in aspeed_soc_uart_set_chr() - Fixed 'i' range in connect_serial_hds_to_uarts() loop ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-27hw/ide: Remove last two uses of ide/internal.h outside of hw/ide/BALATON Zoltan
Remove last two includes of hw/ide/intarnal.h outside of hw/ide and replace them with newly added public header to allow moving internal.h into hw/ide to really stop exposing it. Fixes: a11f439a0e (hw/ide: Stop exposing internal.h to non-IDE files) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240223142633.933694E6004@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-27hw/arm/sbsa-ref: Do not open-code ahci_ide_create_devs()Philippe Mathieu-Daudé
Use ahci_ide_create_devs() instead of open-coding it. Not accessing AHCIDevice internals anymore allows to remove "hw/ide/ahci_internal.h" (which isn't really a public header). Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240226080632.9596-2-philmd@linaro.org>
2024-02-27hw/usb: extract sysbus-ohci to a separate filePaolo Bonzini
Split the sysbus version to a separate file so that it is not included in PCI-only machines, and adjust Kconfig for machines that do need sysbus-ohci. The copyrights are based on the time and employer of balrog and Paul Brook's contributions. While adjusting the SM501 dependency, move it to the right place instead of keeping it in the R4D machine. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-10-pbonzini@redhat.com> [PMD: Rename some functions using 'ohci_sysbus_' prefix] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-26hw/display/exynos4210_fimd: Pass frame buffer memory region as linkPhilippe Mathieu-Daudé
Add the Exynos4210fimdState::'framebuffer-memory' property. Have the board set it. We don't need to call sysbus_address_space() anymore. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240226173805.289-5-philmd@linaro.org>
2024-02-26hw/arm/exynos4210: Inline sysbus_create_varargs(EXYNOS4210_FIMD)Philippe Mathieu-Daudé
We want to set another qdev property (a link) for the FIMD device, we can not use sysbus_create_varargs() which only passes sysbus base address and IRQs as arguments. Inline it so we can set the link property in the next commit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240216153517.49422-4-philmd@linaro.org>
2024-02-26hw/display/pl110: Pass frame buffer memory region as link propertyPhilippe Mathieu-Daudé
Add the PL110::'framebuffer-memory' property. Have the different ARM boards set it. We don't need to call sysbus_address_space() anymore. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240226173805.289-3-philmd@linaro.org>
2024-02-26hw/arm: Inline sysbus_create_simple(PL110 / PL111)Philippe Mathieu-Daudé
We want to set another qdev property (a link) for the pl110 and pl111 devices, we can not use sysbus_create_simple() which only passes sysbus base address and IRQs as arguments. Inline it so we can set the link property in the next commit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240226173805.289-2-philmd@linaro.org>
2024-02-22hw/ide: Split qdev.c into ide-bus.c and ide-dev.cThomas Huth
qdev.c is a mixture between IDE bus specific functions and IDE device functions. Let's split it up to make it more obvious which part is related to bus handling and which part is related to device handling. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-ID: <20240220085505.30255-3-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-16Merge tag 'hw-misc-20240215' of https://github.com/philmd/qemu into stagingPeter Maydell
Misc HW patch queue - Remove unused MIPS SAAR* registers (Phil) - Remove warning when testing the TC58128 NAND EEPROM (Peter) - KConfig cleanups around ISA SuperI/O and MIPS (Paolo) - QDev API uses sanitization (Philippe) - Split AHCI model as PCI / SysBus (Philippe) - Add SMP support to SPARC Leon3 board (Clément) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXOUD4ACgkQ4+MsLN6t # wN6gWRAAjf+6Z9VUvvHqZoaSJW49k+GRUelTI2tyN+eGfetAx9dk8aIbpbV1X12d # pc56jsSi6ICT7baCegtxHszhYJr2e9A2QLCAOJt+Oz87kEGes3ONVVKAk7pwjKxt # m8pmU3uXWgFvU6PoFBhGBa6LiZBulgLNXBUwzmEhc9PpPkR49ULdDp/qxtWvxOV5 # xYBktFlkiT+AvHq3QWCnDIaw+pH5ghEq9BI4xFOvvvqSqdHEqsGAaiKPa9Po0Gfz # Ap9qsm4FxKxhGoeQWtAIP8TvN3pFFSXMysziP6Xt1rffKsvF9ioghGKRM6BgQfqD # ZetjcFbcf7dQu3zZVy8ljYcymMxfZcWWVVq4CMC68lPQE97hz1CT3PJjgd77dKfi # z60uRkOGaiPW5iIGT9+vdQxZ5K3HivKyjuHOdV8V4HnWO3oqgfDtNHn5RKed0qUg # g1FoWriJGsDixdx1vd0EoH2/oTxy4HIsFv7a1OjiZyBLjO+EeEZ3+H9pqUHqBxva # +Dv70z9F1sv5dzcUXH+oCgTbnKlJ90Q+e3vj0wGdlBncVsgIwbtgqYelhUEl+xJX # Mu6KNUo5ANVP38ZKG0GSMCZHfcUjc5s+5rG55NbTN0HiF56a6D2KlQAuXdUsGE1J # 7i4cwipJmfxzbdPDlSb3kBxm5pFexEk6nROF9kTHQj3ZBMMvIls= # =nOX+ # -----END PGP SIGNATURE----- # gpg: Signature made Thu 15 Feb 2024 17:56:14 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'hw-misc-20240215' of https://github.com/philmd/qemu: (56 commits) hw/ide/ich9: Use AHCIPCIState typedef hw/ide/ahci: Move SysBus definitions to 'ahci-sysbus.h' hw/ide/ahci: Remove SysbusAHCIState::num_ports field hw/ide/ahci: Do not pass 'ports' argument to ahci_realize() hw/ide/ahci: Convert AHCIState::ports to unsigned hw/ide/ahci: Pass AHCI context to ahci_ide_create_devs() hw/ide/ahci: Inline ahci_get_num_ports() hw/ide/ahci: Rename AHCI PCI function as 'pdev' hw/ide/ahci: Expose AHCIPCIState structure hw/i386/q35: Use DEVICE() cast macro with PCIDevice object hw/i386/q35: Simplify pc_q35_init() since PCI is always enabled MAINTAINERS: Add myself as reviewer for TCG Plugins MAINTAINERS: replace Fabien by myself as Leon3 maintainer hw/sparc/leon3: Initialize GPIO before realizing CPU devices hw/sparc/leon3: Pass DeviceState opaque argument to leon3_start_cpu() hw/sparc/leon3: Pass DeviceState opaque argument to leon3_set_pil_in() hw/sparc/leon3: check cpu_id in the tiny bootloader hw/sparc/leon3: implement multiprocessor hw/sparc/leon3: remove SP initialization target/sparc: implement asr17 feature for smp ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/ide/ahci: Move SysBus definitions to 'ahci-sysbus.h'Philippe Mathieu-Daudé
Keep "hw/ide/ahci.h" AHCI-generic. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20240213081201.78951-10-philmd@linaro.org>
2024-02-15hw/arm/mps3r: Add remaining devicesPeter Maydell
Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devicesPeter Maydell
Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Add UARTsPeter Maydell
This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAMPeter Maydell
Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Initial skeleton for mps3-an536 boardPeter Maydell
The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
2024-02-15hw/arm/stellaris: Add missing QOM 'SoC' parentPhilippe Mathieu-Daudé
QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/stellaris: Add missing QOM 'machine' parentPhilippe Mathieu-Daudé
QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/stellaris: Convert I2C controller to Resettable interfacePhilippe Mathieu-Daudé
Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/stellaris: Convert ADC controller to Resettable interfacePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/smmuv3: add support for stage 1 access faultLuc Michel
An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modulesPeter Maydell
The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org
2024-02-15hw/arm/virt: Wire up non-secure EL2 virtual timer IRQPeter Maydell
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
2024-02-15hw/arm/xilinx_zynq: Wire FIQ between CPU <> GICPhilippe Mathieu-Daudé
Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-14Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, cleanups, fixes vhost-user-snd support x2APIC mode with TCG support CXL update to r3.1 fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK # w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+ # /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna # mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek # +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK # zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc= # =K4b1 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits) MAINTAINERS: Switch to my Enfabrica email virtio-gpu-rutabaga.c: override resource_destroy method virtio-gpu.c: add resource_destroy class method hw/display/virtio-gpu.c: use reset_bh class method hw/smbios: Fix port connector option validation hw/smbios: Fix OEM strings table option validation virtio-gpu: Correct virgl_renderer_resource_get_info() error check hw/cxl: Standardize all references on CXL r3.1 and minor updates hw/cxl: Update mailbox status registers. hw/cxl: Update RAS Capability Definitions for version 3. hw/cxl: Update link register definitions. hw/cxl: Update HDM Decoder capability to version 3 tests/acpi: Update DSDT.cxl to reflect change _STA return value. hw/i386: Fix _STA return value for ACPI0017 tests/acpi: Allow update of DSDT.cxl hw/mem/cxl_type3: Fix potential divide by zero reported by coverity hw/cxl: Pass NULL for a NULL MemoryRegionOps hw/cxl: Pass CXLComponentState to cache_mem_ops hw/cxl/device: read from register values in mdev_reg_read() hw/cxl/mbox: Remove dead code ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-14smmu: Clear SMMUPciBus pointer cache when system resetZhenzhong Duan
s->smmu_pcibus_by_bus_num is a SMMUPciBus pointer cache indexed by bus number, bus number may not always be a fixed value, i.e., guest reboot to different kernel which set bus number with different algorithm. This could lead to smmu_iommu_mr() providing the wrong iommu MR. Suggested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20240125073706.339369-3-zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-13hw/arm/smmuv3: Consolidate the use of device_class_set_parent_realize()Zhao Liu
Use device_class_set_parent_realize() to set parent realize() directly. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-02Merge tag 'pull-target-arm-20240202' of ↵Peter Maydell
https://git.linaro.org/people/pmaydell/qemu-arm into staging target/arm: fix exception syndrome for AArch32 bkpt insn pci, vmbus, adb, s390x/css-bridge: Switch buses to 3-phase reset system/vl.c: Fix handling of '-serial none -serial something' target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array target/arm: Reinstate "vfp" property on AArch32 CPUs doc/sphinx/hxtool.py: add optional label argument to SRST directive hw/arm: Check for CPU types in machine_run_board_init() for various boards pci-host: designware: Limit value range of iATU viewport register hw/arm: Convert some DPRINTF macros to trace events and guest errors hw/arm: NPCM7XX SoC: Add GMAC ethernet controller devices hw/arm: Implement BCM2835 SPI Controller # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmW9C84ZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3qS6D/wM0/JGEYfaadpuMEOAx4PG # AnfScbPqVhx9J31P2Ks3VrB5F108aq/SaL2BmCb3BLF/ECChlhBXIjd7ukdHstts # F1TvqtvLGDZQz6wSVUeB0YOvAjGa3vIskn+Xvk9e6Ne6PcXgVnxAof/cPsXUiYNy # 6DJjNiLJ/a9Xgq9rjFO6vzW3AL95U6/FmD2F0pOotWXERhNhoyYVV6RtyeqKlDQP # yFVk5h601YURk9PeNZn9zpOpZqjAM7PxyF3X50N3Sv+G0uoKSr6b+c3/fDJbJo3+ # 0LXomEa8hdheQxm1dLY5OD0JX3bvYxwH41bDg9B0iEdjxUdXt6LfXI9Nvw9BAwix # 8AcGJJUaL4XU4uPfHBpRJApM15+MRb0hqfv4ZcGk8e67IIqVeDbKL2clTQGoHSg1 # KaB0POhtFx//M/uBOyk/FR2gb2eBNU8GuoCgxdDwh0K5ylcaK1YPiX4Tcglu4iS0 # Frvazphb2pO1BK6JiJwN2/9ezzDkDJqTKoSqdc4g3ETVOGnxr+tXwcds3t2iK3g2 # y+pgijDOAT3bJO5kYeGvhoEJPKqXwJ3UQ8zTJsU2XSYwBjIyv5V3oOn6elwYJaWq # yUDTC3QEK61KfnQnfTyLfdGWX1aVzHnYLWmQdO+3cczuQU0s0MP246Z1GAgDtgvD # jGjDBz6mryWvP2H0xSmERQ== # =azdP # -----END PGP SIGNATURE----- # gpg: Signature made Fri 02 Feb 2024 15:35:42 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240202' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) hw/arm: Connect SPI Controller to BCM2835 hw/ssi: Implement BCM2835 SPI Controller tests/qtest: Adding PCS Module test to GMAC Qtest hw/net: GMAC Tx Implementation hw/net: GMAC Rx Implementation tests/qtest: Creating qtest for GMAC Module hw/arm: Add GMAC devices to NPCM7XX SoC hw/net: Add NPCMXXX GMAC device hw/xen: convert stderr prints to error/warn reports hw/xen/xen-hvm-common.c: convert DPRINTF to tracepoints hw/xen/xen-mapcache.c: convert DPRINTF to tracepoints hw/arm/xen_arm.c: convert DPRINTF to trace events and error/warn reports hw/arm/z2: convert DPRINTF to trace events and guest errors hw/arm/strongarm.c: convert DPRINTF to trace events and guest errors pci-host: designware: Limit value range of iATU viewport register hw/arm/zynq: Check for CPU types in machine_run_board_init() hw/arm/vexpress: Check for CPU types in machine_run_board_init() hw/arm/npcm7xx_boards: Simplify setting MachineClass::valid_cpu_types[] hw/arm/musca: Simplify setting MachineClass::valid_cpu_types[] hw/arm/msf2: Simplify setting MachineClass::valid_cpu_types[] ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm: use qemu_configure_nic_device()David Woodhouse
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 04:21:00 +0000