aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2023-02-16target/arm: Use "max" as default cpu for the virt machine with KVMFabiano Rosas
Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm/smmu-common: Fix TTB1 handlingJean-Philippe Brucker
Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm/smmu-common: Support 64-bit addressesJean-Philippe Brucker
Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Attach PSPI module to NPCM7XX SoCHao Wu
Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16arm/virt: don't try to spell out the acceleratorCornelia Huck
Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependencyPhilippe Mathieu-Daudé
Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm/smmuv3: Add GBPA registerMostafa Saleh
GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-08Drop duplicate #includeMarkus Armbruster
Tracked down with the help of scripts/clean-includes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
2023-02-07hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4FPhilippe Mathieu-Daudé
This SoC uses a Cortex-M4F. QEMU only implements a M4, which is good enough. Add a TODO note in case the M4F is added. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map HACE peripheralPhilippe Mathieu-Daudé
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Before on Zephyr: uart:~$ hash test sha256_test tv[0]:hash_final error sha384_test tv[0]:hash_final error sha512_test tv[0]:hash_final error [00:00:06.278,000] <err> hace_global: HACE poll timeout [00:00:09.324,000] <err> hace_global: HACE poll timeout [00:00:12.261,000] <err> hace_global: HACE poll timeout uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 [00:00:09.743,000] <err> hace_global: HACE poll timeout [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ After: uart:~$ hash test sha256_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS sha384_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS sha512_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 Was waiting for: 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 But got: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map the secure SRAMPhilippe Mathieu-Daudé
Some SRAM appears to be used by the Secure Boot unit and crypto accelerators. Name it 'secure sram'. Note, the SRAM base address was already present but unused (the 'SBC' index is used for the MMIO peripheral). Interestingly using CFLAGS=-Winitializer-overrides reports: ../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] [ASPEED_DEV_SBC] = 0x7E6F2000, ^~~~~~~~~~ ../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here [ASPEED_DEV_SBC] = 0x79000000, ^~~~~~~~~~ This fixes with Zephyr: uart:~$ rsa test rsa test vector[0]: [00:00:26.156,000] <err> os: ***** BUS FAULT ***** [00:00:26.157,000] <err> os: Precise data bus error [00:00:26.157,000] <err> os: BFAR Address: 0x79000000 [00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800 [00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d [00:00:26.158,000] <err> os: xpsr: 0x81000000 [00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc [00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0 [00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart) [00:00:26.165,000] <err> os: Halting system Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: Fixed size of Secure Boot Controller Memory ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map I3C peripheralPhilippe Mathieu-Daudé
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Add various unimplemented peripheralsPhilippe Mathieu-Daudé
Based on booting Zephyr demo from [1] running QEMU with '-d unimp' and checking missing devices in [2]. [1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07 [2] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize'Philippe Mathieu-Daudé
Avoid confusing two different things: - the WDT I/O region size ('iosize') - at which offset the SoC map the WDT ('offset') While it is often the same, we can map smaller region sizes at larger offsets. Here we are interested in the I/O region size, so rename as 'iosize'. Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [ clg: Introduced temporary wdt_offset variable ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed: Add aspeed_eeprom.cPeter Delevoryas
- Create aspeed_eeprom.c and aspeed_eeprom.h - Include aspeed_eeprom.c in CONFIG_ASPEED meson source files - Include aspeed_eeprom.h in aspeed.c - Add fby35_bmc_fruid data - Use new at24c_eeprom_init_rom helper to initialize BMC FRUID EEPROM with data from aspeed_eeprom.c wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd qemu-system-aarch64 -machine fby35-bmc -nographic -mtdblock fby35.mtd ... user: root pass: 0penBmc ... root@bmc-oob:~# fruid-util bb FRU Information : Baseboard --------------- : ------------------ Chassis Type : Rack Mount Chassis Chassis Part Number : N/A Chassis Serial Number : N/A Board Mfg Date : Fri Jan 7 10:30:00 2022 Board Mfg : XXXXXX Board Product : Management Board wBMC Board Serial : XXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXX Board FRU ID : 1.0 Board Custom Data 1 : XXXXXXXXX Board Custom Data 2 : XXXXXXXXXXXXXXXXXX Product Manufacturer : XXXXXX Product Name : Yosemite V3.5 EVT2 Product Part Number : XXXXXXXXXXXXXX Product Version : EVT2 Product Serial : XXXXXXXXXXXXX Product Asset Tag : XXXXXXX Product FRU ID : 1.0 Product Custom Data 1 : XXXXXXXXX Product Custom Data 2 : N/A root@bmc-oob:~# fruid-util bmc FRU Information : BMC --------------- : ------------------ Board Mfg Date : Mon Jan 10 21:42:00 2022 Board Mfg : XXXXXX Board Product : BMC Storage Module Board Serial : XXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXX Board FRU ID : 1.0 Board Custom Data 1 : XXXXXXXXX Board Custom Data 2 : XXXXXXXXXXXXXXXXXX Product Manufacturer : XXXXXX Product Name : Yosemite V3.5 EVT2 Product Part Number : XXXXXXXXXXXXXX Product Version : EVT2 Product Serial : XXXXXXXXXXXXX Product Asset Tag : XXXXXXX Product FRU ID : 1.0 Product Custom Data 1 : XXXXXXXXX Product Custom Data 2 : Config A root@bmc-oob:~# fruid-util nic FRU Information : NIC --------------- : ------------------ Board Mfg Date : Tue Nov 2 08:51:00 2021 Board Mfg : XXXXXXXX Board Product : Mellanox ConnectX-6 DX OCP3.0 Board Serial : XXXXXXXXXXXXXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXXXXXXXXX Board FRU ID : FRU Ver 0.02 Product Manufacturer : XXXXXXXX Product Name : Mellanox ConnectX-6 DX OCP3.0 Product Part Number : XXXXXXXXXXXXXXXXXXXXX Product Version : A9 Product Serial : XXXXXXXXXXXXXXXXXXXXXXXX Product Custom Data 3 : ConnectX-6 DX Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-5-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_initPeter Delevoryas
aspeed_eeprom_init is an exact copy of at24c_eeprom_init, not needed. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-3-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boardsPeter Delevoryas
This helper is useful in board initialization because lets users initialize and realize an EEPROM on an I2C bus with a single function call. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07aspeed: Add Supermicro X11 SPI machine typeGuenter Roeck
supermicrox11-bmc is configured with ast2400-a1 SoC. This does not match the Supermicro documentation for X11 BMCs, and it does not match the devicetree file in the Linux kernel. As it turns out, some Supermicro X11 motherboards use AST2400 SoCs, while others use AST2500. Introduce new machine type supermicrox11-spi-bmc with AST2500 SoC to match the devicetree description in the Linux kernel. Hardware configuration details for this machine type are guesswork and taken from defaults as well as from the Linux kernel devicetree file. The new machine type was tested with aspeed-bmc-supermicro-x11spi.dts from the Linux kernel and with Linux versions 6.0.3 and 6.1-rc2. Linux booted successfully from initrd and from both SPI interfaces. Ethernet interfaces were confirmed to be operational. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20221025165109.1226001-1-linux@roeck-us.net [ clg: Renamed machine to 'supermicro-x11spi-bmc' ] Message-Id: <20221025165109.1226001-1-linux@roeck-us.net> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado: Truncate M2S-FG484 SOM SPI flash to 16MiBPhilippe Mathieu-Daudé
The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion S25FL128SDPBHICO). Since the test asset is bigger, truncate it to the correct size to avoid when running the test_arm_emcraft_sf2 test: qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes Add comment regarding the M2S-FG484 SOM hardware in hw/arm/msf2-som.c. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-03sbsa-ref: remove cortex-a76 from list of supported cpusMarcin Juszkiewicz
Cortex-A76 supports 40bits of address space. sbsa-ref's memory starts above this limit. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230126114416.2447685-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-03hw/arm/virt: Make accels in GIC finalize logic explicitAlexander Graf
Let's explicitly list out all accelerators that we support when trying to determine the supported set of GIC versions. KVM was already separate, so the only missing one is HVF which simply reuses all of TCG's emulation code and thus has the same compatibility matrix. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221223090107.98888-3-agraf@csgraf.de [PMM: Added qtest to the list of accelerators] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-03hw/arm/virt: Consolidate GIC finalize logicAlexander Graf
Up to now, the finalize_gic_version() code open coded what is essentially a support bitmap match between host/emulation environment and desired target GIC type. This open coding leads to undesirable side effects. For example, a VM with KVM and -smp 10 will automatically choose GICv3 while the same command line with TCG will stay on GICv2 and fail the launch. This patch combines the TCG and KVM matching code paths by making everything a 2 pass process. First, we determine which GIC versions the current environment is able to support, then we go through a single state machine to determine which target GIC mode that means for us. After this patch, the only user noticable changes should be consolidated error messages as well as TCG -M virt supporting -smp > 8 automatically. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20221223090107.98888-2-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-03hw/arm: Use TYPE_ARM_SMMUV3Richard Henderson
Use the macro instead of two explicit string literals. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230124232059.4017615-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-28hw: Use TYPE_PCI_BUS definition where appropriatePhilippe Mathieu-Daudé
Use the proper QOM type definition instead of magic string. This also helps during eventual refactor while using git-grep. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230117193014.83502-1-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2023-01-23hw/i2c/versatile_i2c: Rename versatile_i2c -> arm_sbcon_i2cPhilippe Mathieu-Daudé
This device model started with the Versatile board, named TYPE_VERSATILE_I2C, then ended up renamed TYPE_ARM_SBCON_I2C as per the official "ARM SBCon two-wire serial bus interface" description from: https://developer.arm.com/documentation/dui0440/b/programmer-s-reference/two-wire-serial-bus-interface--sbcon Use the latter name as a better description. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230110082508.24038-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23hw/i2c/versatile_i2c: Replace TYPE_VERSATILE_I2C -> TYPE_ARM_SBCON_I2CPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230110082508.24038-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23hw/i2c/bitbang_i2c: Define TYPE_GPIO_I2C in public headerPhilippe Mathieu-Daudé
Define TYPE_GPIO_I2C in the public "hw/i2c/bitbang_i2c.h" header and use it in hw/arm/musicpal.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 20230111085016.44551-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-19Merge tag 'trivial-branch-for-8.0-pull-request' of ↵Peter Maydell
https://gitlab.com/laurent_vivier/qemu into staging trivial branch pull request 20230118 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPHpRASHGxhdXJlbnRA # dml2aWVyLmV1AAoJEPMMOL0/L748fwEP+wTA6dBYqRnZMCPEkk6yy0nSVr6GF8FA # i9JrUbRuBf8WT2RAFJEwOyACTaYgCwqU9tu6UxG2ekGfGDtR84HH1yozTAbBuPct # qoT/cvrQ0/Nfymw1Ia1vH5D6EQiAn+j6/1C41PEHvqTQBMe8E4U8jDIwbXTaJS7j # QSUDplRfCbSBXQ9ctFrcD6XxX06dj4U9l8L4gl5Uc4B1OmFacyJnfzMIyVRTIhvF # S4sKB/8B36emFITw/gk+MW5HnBgjEIWvZjof71eglMqo79jmacGeOe8NQi1+ApQ1 # lVmllKewdgLHVwdOGVX4dCJQdhSL/7DjreqtKGrUmhZfJdmCWJdl3jVWqhr4lfME # U7ytd68iLdKgfKqepc3+WbhA8pWT+brPVpTU9hq17DsNJqeZa6628OguDEtjz9dP # 4Y4XFZMxFadYl4YaCpGzTN1tqsrO8Ct+Kvq/90nt5FUeTX+i+/WM/9XXNf9MD4VS # OVCwHXCa4yHMMq2LGV0sWaL7vSI26lv0asKtalAelbVZhVyB1kSZfde2rZXuhoD5 # S2d9x2bcFG6WNlDfyaANkCKyHlxUaOroQVE+y0SqgtaC2oPhuXtG6fusiyvjG9+l # 9O6jy87e4uR+Xach6MmybMjiPDi0VMvPayVz3BR/6hBZZB/GkLO1OmNQcZiXcbOd # yROzKPmyZ/q+ # =35x0 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 18 Jan 2023 07:51:44 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * tag 'trivial-branch-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu: hw/ssi/sifive_spi.c: spelling: reigster hw/cxl/cxl-host: Fix an error message typo hw/cxl/cxl-cdat.c: spelling: missmatch hw/pvrdma: Protect against buggy or malicious guest driver ccid-card-emulated: fix cast warning/error hw/i386/pc: Remove unused 'owner' argument from pc_pci_as_mapping_init tests/qtest/test-hmp: Improve the check for verbose mode hw/usb: Mark the XLNX_VERSAL-related files as target-independent hw/intc: Mark more interrupt-controller files as target independent hw/cpu: Mark arm11 and realview mpcore as target-independent code hw/arm: Move various units to softmmu_ss[] hw/tpm: Move tpm_ppi.c out of target-specific source set hw/intc: Move some files out of the target-specific source set hw/display: Move omap_lcdc.c out of target-specific source set Call qemu_socketpair() instead of socketpair() when possible Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-16hw/arm: Move various units to softmmu_ss[]Philippe Mathieu-Daudé
arm_ss[] units are built twice: once for 32-bit word size and once for 64-bit. The following units don't require any word size knowledge and can be moved to softmmu_ss[] (where they are built once): - smmu-common.c - exynos4_boards.c - bcm2835_peripherals.c - tosa.c Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110164406.94366-2-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230112134928.1026006-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-01-12hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE()Philippe Mathieu-Daudé
The typedef and definitions are generated by the OBJECT_DECLARE_TYPE macro in "hw/arm/bcm2836.h": 20 #define TYPE_BCM283X "bcm283x" 21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed them because they are declared in a different file unit. Remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type namePhilippe Mathieu-Daudé
Following docs/devel/style.rst guidelines, rename stellaris_adc_state -> StellarisADCState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/stellaris: Drop useless casts from void * to pointerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/omap: Drop useless casts from void * to pointerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Remove unreachable code calling pflash_cfi01_register()Philippe Mathieu-Daudé
Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x: QOMified") the pflash_cfi01_register() function does not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/vexpress: Remove dead code in vexpress_common_init()Philippe Mathieu-Daudé
Upon introduction in commit b8433303fb ("Set proper device-width for vexpress flash"), ve_pflash_cfi01_register() was calling qdev_init_nofail() which can not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/z2: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/omap_sx1: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/omap_sx1: Remove unused 'total_ram' definitionsPhilippe Mathieu-Daudé
The total_ram_v1/total_ram_v2 definitions were never used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/musicpal: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/mainstone: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/gumstix: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-7-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/gumstix: Improve documentationPhilippe Mathieu-Daudé
Add a comment describing the Connex uses a Numonyx RC28F128J3F75 flash, and the Verdex uses a Micron RC28F256P30TFA. Correct the Verdex machine description (we model the 'Pro' board). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-6-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/collie: Simplify flash creation using for() loopPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/collie: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/pxa2xx: Simplify pxa270_init()Philippe Mathieu-Daudé
Since pxa270_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/pxa2xx: Simplify pxa255_init()Philippe Mathieu-Daudé
Since pxa255_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Allwinner A10 enable SPL load from MMCStrahinja Jankovic
This patch enables copying of SPL from MMC if `-kernel` parameter is not passed when starting QEMU. SPL is copied to SRAM_A. The approach is reused from Allwinner H3 implementation. Tested with Armbian and custom Yocto image. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm: Add AXP209 to CubieboardStrahinja Jankovic
SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12{hw/i2c,docs/system/arm}: Allwinner TWI/I2C EmulationStrahinja Jankovic
This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-23 15:30:11 +0000