aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2020-09-25load_elf: Remove unused address variables from callersBALATON Zoltan
Several callers of load_elf() pass pointers for lowaddr and highaddr parameters which are then not used for anything. This may stem from a misunderstanding that load_elf need a value here but in fact it can take NULL to ignore these values. Remove such unused variables and pass NULL instead from callers that don't need these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-22xlnx-zcu102: Register properties as class propertiesEduardo Habkost
Class properties make QOM introspection simpler and easier, as they don't require an object to be instantiated. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200921221045.699690-20-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22qom: simplify object_find_property / object_class_find_propertyDaniel P. Berrangé
When debugging QEMU it is often useful to put a breakpoint on the error_setg_internal method impl. Unfortunately the object_property_add / object_class_property_add methods call object_property_find / object_class_property_find methods to check if a property exists already before adding the new property. As a result there are a huge number of calls to error_setg_internal on startup of most QEMU commands, making it very painful to set a breakpoint on this method. Most callers of object_find_property and object_class_find_property, however, pass in a NULL for the Error parameter. This simplifies the methods to remove the Error parameter entirely, and then adds some new wrapper methods that are able to raise an Error when needed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200914135617.1493072-1-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200918' ↵Peter Maydell
into staging Aspeed patches : * Couple of cleanups * New machine properties to define the flash models # gpg: Signature made Fri 18 Sep 2020 08:23:19 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20200918: misc: aspeed_scu: Update AST2600 silicon id register hw/arm/aspeed: Add machine properties to define the flash models hw/arm/aspeed: Map the UART5 device unconditionally Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18hw/arm/aspeed: Add machine properties to define the flash modelsCédric Le Goater
Some machines don't have much differences a part from the flash model being used. Introduce new machine properties to change them from the command line. For instance, to start the ast2500-evb machine with a different FMC chip and a 64M SPI chip, use : -M ast2500-evb,fmc-model=mx25l25635e,spi-model=mx66u51235f Cc: 郁雷 <yulei.sh@bytedance.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Lei YU <yulei.sh@bytedance.com> Message-Id: <20200915054859.2338477-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-18hw/arm/aspeed: Map the UART5 device unconditionallyPhilippe Mathieu-Daudé
The UART5 is present on the machine regardless there is a character device connected to it. Map it unconditionally. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200905212415.760452-1-f4bug@amsat.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-17acpi: move acpi_dsdt_add_power_button() to gedGerd Hoffmann
Allow reuse for microvm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-14hw/arm/npcm7xx: add board setup stub for CPU and UART clocksHavard Skinnemoen
When booting directly into a kernel, bypassing the boot loader, the CPU and UART clocks are not set up correctly. This makes the system appear very slow, and causes the initrd boot test to fail when optimization is off. The UART clock must run at 24 MHz. The default 25 MHz reference clock cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works perfectly with the default /20 divider. The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs at 800 MHz by default, so we need to double the feedback divider as well to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz). We don't bother checking for PLL lock because we know our emulated PLLs lock instantly. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-13-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsjHavard Skinnemoen
This allows these NPCM7xx-based boards to boot from a flash image, e.g. one built with OpenBMC. For example like this: IMAGE=${OPENBMC}/build/tmp/deploy/images/gsj/image-bmc qemu-system-arm -machine quanta-gsj -nographic \ -drive file=${IMAGE},if=mtd,bus=0,unit=0,format=raw,snapshot=on Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200911052101.2602693-12-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/ssi: NPCM7xx Flash Interface Unit device modelHavard Skinnemoen
This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/mem: Stubbed out NPCM7xx Memory Controller modelHavard Skinnemoen
This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/nvram: NPCM7xx OTP device modelHavard Skinnemoen
This supports reading and writing OTP fuses and keys. Only fuse reading has been tested. Protection is not implemented. Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-9-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Load -bios image as a boot ROM for npcm7xxHavard Skinnemoen
If a -bios option is specified on the command line, load the image into the internal ROM memory region, which contains the first instructions run by the CPU after reset. If -bios is not specified, the vbootrom included with qemu is loaded by default. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-8-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add two NPCM7xx-based machinesHavard Skinnemoen
This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add NPCM730 and NPCM750 SoC modelsHavard Skinnemoen
The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen
Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: versal-virt: Correct the tx/rx GEM clocksEdgar E. Iglesias
Correct the GEMs tx/rx clocks to use the 125Mhz fixed-clock. This matches the setup with the fixed-link 100Mbit PHY. It also avoids the following warnings from the Linux kernel driver: eth0: unable to generate target frequency: 125000000 Hz Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200909174647.662864-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm/mps2: New board model mps2-an500Peter Maydell
Implement a model of the MPS2 with the AN500 firmware. This is similar to the AN385, with the following differences: * Cortex-M7 CPU * PSRAM is at 0x6000_0000 * Ethernet is at 0xa000_0000 * No zbt_boot_ctrl remapping of the low 16K (but QEMU doesn't implement this anyway) * no "block RAM" at 0x01000000 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-3-peter.maydell@linaro.org
2020-09-14hw/arm/mps2: New board model mps2-an386Peter Maydell
Implement a model of the MPS2 with the AN386 firmware. This is essentially identical to the AN385 firmware, but it has a Cortex-M4 rather than a Cortex-M3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-2-peter.maydell@linaro.org
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-11hw/arm/pxa2xx: Add missing fallthrough commentThomas Huth
Let's make this file compilable with -Werror=implicit-fallthrough : Looking at the code, it seems like the fallthrough is intended here, so we should add the corresponding "/* fallthrough */" comment here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200911121844.404434-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23Bin Meng
When cadence_gem model was created for Xilinx boards, the PHY address was hard-coded to 23 in the GEM model. Now that we have introduced a property we can use that to tell GEM model what our PHY address is. Change all boards' GEM 'phy-addr' property value to 23, and set the PHY address default value to 0 in the GEM model. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-13-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-08configure: do not include dependency flags in QEMU_CFLAGS and LIBSPaolo Bonzini
All Meson executables should specify their dependencies explicitly, either directly or indirectly via declare_dependency. Makefiles instead did not propagate dependencies correctly from static libraries, for example. Therefore, flags for dependencies need not be included in QEMU_CFLAGS. LIBS is not used at all, so drop that one as well. In a few cases the dependencies were not yet specified, so add them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-03Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' ↵Peter Maydell
into staging Various fixes of Aspeed machines : * New Supermicro X11 BMC machine (Erik) * Fixed valid access size on AST2400 SCU * Improved robustness of the ftgmac100 model. * New flash models in m25p80 (Igor) * Fixed reset sequence of SDHCI/eMMC controllers * Improved support of the AST2600 SDMC (Joel) * Couple of SMC cleanups # gpg: Signature made Tue 01 Sep 2020 13:39:20 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20200901: hw: add a number of SPI-flash's of m25p80 family arm: aspeed: add strap define `25HZ` of AST2500 aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller aspeed/sdmc: Simplify calculation of RAM bits aspeed/sdmc: Allow writes to unprotected registers aspeed/sdmc: Perform memory training ftgmac100: Improve software reset ftgmac100: Fix integer overflow in ftgmac100_do_tx() ftgmac100: Check for invalid len and address before doing a DMA transfer ftgmac100: Change interrupt status when a DMA error occurs ftgmac100: Fix interrupt status "Packet moved to RX FIFO" ftgmac100: Fix interrupt status "Packet transmitted on ethernet" ftgmac100: Fix registers that can be read aspeed/sdhci: Fix reset sequence aspeed/smc: Fix max_slaves of the legacy SMC device aspeed/smc: Fix MemoryRegionOps definition hw/arm/aspeed: Add board model for Supermicro X11 BMC aspeed/scu: Fix valid access size on AST2400 m25p80: Add support for n25q512ax3 m25p80: Return the JEDEC ID twice for mx25l25635e Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200901' into staging target-arm queue: * Implement fp16 support for AArch32 VFP and Neon * hw/arm/sbsa-ref: add "reg" property to DT cpu nodes * hw/arm/sbsa-ref : Add embedded controller in secure memory # gpg: Signature made Tue 01 Sep 2020 16:17:23 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200901: (47 commits) hw/arm/sbsa-ref : Add embedded controller in secure memory hw/misc/sbsa_ec : Add an embedded controller for sbsa-ref hw/arm/sbsa-ref: add "reg" property to DT cpu nodes target/arm: Enable FP16 in '-cpu max' target/arm: Implement fp16 for Neon VMUL, VMLA, VMLS target/arm/vec_helper: Add gvec fp indexed multiply-and-add operations target/arm/vec_helper: Handle oprsz less than 16 bytes in indexed operations target/arm: Implement fp16 for Neon VRINTX target/arm: Implement fp16 for Neon VRINT-with-specified-rounding-mode target/arm: Implement fp16 for Neon VCVT with rounding modes target/arm: Implement fp16 for Neon VCVT fixed-point target/arm: Convert Neon VCVT fixed-point to gvec target/arm: Implement fp16 for Neon float-integer VCVT target/arm: Implement fp16 for Neon pairwise fp ops target/arm: Implement fp16 for Neon VRSQRTS target/arm: Implement fp16 for Neon VRECPS target/arm: Implement fp16 for Neon fp compare-vs-0 target/arm: Implement fp16 for Neon VFMA, VMFS target/arm: Implement fp16 for Neon VMLA, VMLS operations target/arm: Implement fp16 for Neon VMAXNM, VMINNM ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01hw/arm/sbsa-ref : Add embedded controller in secure memoryGraeme Gregory
Add the previously created sbsa-ec device to the sbsa-ref machine in secure memory so the PSCI implementation in ARM-TF can access it, but not expose it to non secure firmware or OS except by via ARM-TF. Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com> Tested-by: Leif Lindholm <leif@nuviainc.com> Message-id: 20200826141952.136164-3-graeme@nuviainc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01hw/arm/sbsa-ref: add "reg" property to DT cpu nodesLeif Lindholm
The sbsa-ref platform uses a minimal device tree to pass amount of memory as well as number of cpus to the firmware. However, when dumping that minimal dtb (with -M sbsa-virt,dumpdtb=<file>), the resulting blob generates a warning when decompiled by dtc due to lack of reg property. Add a simple reg property per cpu, representing a 64-bit MPIDR_EL1. This also ends up being cleaner than having the firmware calculating its own IDs for generating APCI. Signed-off-by: Leif Lindholm <leif@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200827124335.30586-1-leif@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01hw/arm/aspeed: Add board model for Supermicro X11 BMCErik Smit
The BMC Firmware can be downloaded from : https://www.supermicro.com/en/products/motherboard/X11SSL-F Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: Prettified Erik's name in email Modified commit log ] Message-Id: <20200715173418.186-1-erik.lucas.smit@gmail.com> Message-Id: <20200819100956.2216690-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()Chen Qun
Clang static code analyzer show warning: hw/arm/omap1.c:1760:15: warning: Value stored to 'cpu' during its initialization is never read CPUState *cpu = CPU(s->cpu); ^~~ ~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200827110311.164316-3-kuhn.chenqun@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01hw/arm/virt-acpi-build:Remove dead assignment in build_madt()Chen Qun
Clang static code analyzer show warning: hw/arm/virt-acpi-build.c:641:5: warning: Value stored to 'madt' is never read madt = acpi_data_push(table_data, sizeof *madt); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200827110311.164316-2-kuhn.chenqun@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-28Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200828' into staging target-arm queue: * target/arm: Cleanup and refactoring preparatory to SVE2 * armsse: Define ARMSSEClass correctly * hw/misc/unimp: Improve information provided in log messages * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers * target/arm: Fill in the WnR syndrome bit in mte_check_fail * target/arm: Clarify HCR_EL2 ARMCPRegInfo type * hw/arm/musicpal: Use AddressSpace for DMA transfers * hw/clock: Minor cleanups * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs # gpg: Signature made Fri 28 Aug 2020 10:23:02 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200828: (35 commits) target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd target/arm: Generalize inl_qrdmlah_* helper functions target/arm: Tidy SVE tszimm shift formats target/arm: Split out gen_gvec_ool_zz target/arm: Split out gen_gvec_ool_zzz target/arm: Split out gen_gvec_ool_zzp target/arm: Merge helper_sve_clr_* and helper_sve_movz_* target/arm: Split out gen_gvec_ool_zzzp target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp target/arm: Clean up 4-operand predicate expansion target/arm: Merge do_vector2_p into do_mov_p target/arm: Rearrange {sve,fp}_check_access assert target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn target/arm: Split out gen_gvec_fn_zz qemu/int128: Add int128_lshift armsse: Define ARMSSEClass correctly hw/misc/unimp: Display the offset with width of the region size hw/misc/unimp: Display the value with width of the access size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue + QOM fixes and cleanups Bug fix: * numa: hmat: fix cache size check (Igor Mammedov) QOM fixes and cleanups: * Move QOM macros and typedefs to header files * Use TYPE_* constants on TypeInfo structs * Rename QOM type checking macros for consistency * Rename enum values and typedefs that conflict with QOM type checking amcros * Fix typos on QOM type checking macros * Delete unused QOM type checking macros that use non-existing typedefs * hvf: Add missing include * xen-legacy-backend: Add missing typedef XenLegacyDevice # gpg: Signature made Thu 27 Aug 2020 20:20:05 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (53 commits) dc390: Use TYPE_DC390_DEVICE constant ppce500: Use TYPE_PPC_E500_PCI_BRIDGE constant tosa: Use TYPE_TOSA_MISC_GPIO constant xlnx-zcu102: Use TYPE_ZCU102_MACHINE constant sclpconsole: Use TYPE_* constants amd_iommu: Use TYPE_AMD_IOMMU_PCI constant nios2_iic: Use TYPE_ALTERA_IIC constant etsec: Use TYPE_ETSEC_COMMON constant migration: Rename class type checking macros swim: Rename struct SWIM to Swim s390-virtio-ccw: Rename S390_MACHINE_CLASS macro nubus: Rename class type checking macros vfio/pci: Move QOM macros to header kvm: Move QOM macros to kvm.h mptsas: Move QOM macros to header pxa2xx: Move QOM macros to header rocker: Move QOM macros to header auxbus: Move QOM macros to header piix: Move QOM macros to header virtio-serial-bus: Move QOM macros to header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28armsse: Define ARMSSEClass correctlyEduardo Habkost
TYPE_ARM_SSE is a TYPE_SYS_BUS_DEVICE subclass, but ARMSSEClass::parent_class is declared as DeviceClass. It never caused any problems by pure luck: We were not setting class_size for TYPE_ARM_SSE, so class_size of TYPE_SYS_BUS_DEVICE was being used (sizeof(SysBusDeviceClass)). This made the system allocate enough memory for TYPE_ARM_SSE devices even though ARMSSEClass was too small for a sysbus device. Additionally, the ARMSSEClass::info field ended up at the same offset as SysBusDeviceClass::explicit_ofw_unit_address. This would make sysbus_get_fw_dev_path() crash for the device. Luckily, sysbus_get_fw_dev_path() never gets called for TYPE_ARM_SSE devices, because qdev_get_fw_dev_path() is only used by the boot device code, and TYPE_ARM_SSE devices don't appear at the fw_boot_order list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20200826181006.4097163-1-ehabkost@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealizePhilippe Mathieu-Daudé
Clock canonical name is set in device_set_realized (see the block added to hw/core/qdev.c in commit 0e6934f264). If we connect a clock after the device is realized, this code is not executed. This is currently not a problem as this name is only used for trace events, however this disrupt tracing. Fix by calling qdev_connect_clock_in() before realizing. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/arm/xilinx_zynq: Uninline cadence_uart_create()Philippe Mathieu-Daudé
As we want to call qdev_connect_clock_in() before the device is realized, we need to uninline cadence_uart_create() first. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200803105647.22223-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfersPhilippe Mathieu-Daudé
Allow the device to execute the DMA transfers in a different AddressSpace. The H3 SoC keeps using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814122907.27732-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfersPhilippe Mathieu-Daudé
Allow the device to execute the DMA transfers in a different AddressSpace. The A10 and H3 SoC keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814110057.307-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/arm/musicpal: Use AddressSpace for DMA transfersPhilippe Mathieu-Daudé
Allow the device to execute the DMA transfers in a different AddressSpace. We keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200814125533.4047-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/arm/sbsa-ref: fix typo breaking PCIe IRQsGraeme Gregory
Fixing a typo in a previous patch that translated an "i" to a 1 and therefore breaking the allocation of PCIe interrupts. This was discovered when virtio-net-pci devices ceased to function correctly. Cc: qemu-stable@nongnu.org Fixes: 48ba18e6d3f3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state") Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200821083853.356490-1-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-27tosa: Use TYPE_TOSA_MISC_GPIO constantEduardo Habkost
This will make future conversion to use OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200826184334.4120620-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27xlnx-zcu102: Use TYPE_ZCU102_MACHINE constantEduardo Habkost
This will make future conversion to use OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200826184334.4120620-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27pxa2xx: Move QOM macros to headerEduardo Habkost
This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-40-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27armsse: Rename QOM macros to avoid conflictsEduardo Habkost
Rename TYPE_ARMSSE to TYPE_ARM_SSE, and ARMSSE*() type checking macros to ARM_SSE*(). This will avoid a future conflict between an ARM_SSE() type checking macro and the ARMSSE typedef name. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-26-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27aspeed_soc: Rename memmap/irqmap enum constantsEduardo Habkost
Some of the enum constant names conflict with the QOM type check macros: ASPEED_GPIO ASPEED_I2C ASPEED_RTC ASPEED_SCU ASPEED_SDHCI ASPEED_SDMC ASPEED_VIC ASPEED_WDT ASPEED_XDMA This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to ASPEED_DEV_*, to avoid conflicts. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27allwinner-h3: Rename memmap enum constantsEduardo Habkost
Some of the enum constant names conflict with the QOM type check macros (AW_H3_CCU, AW_H3_SYSCTRL). This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to AW_H3_DEV_*, to avoid conflicts. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>