aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2016-10-28hw/arm/tosa: Fix reset handlingGuenter Roeck
Using the CPU reset handler for resets triggered by writing into gpio pins other than GPIO01 is not appropriate and does not work, since the reset triggered by writing into GPIO01 is configurable. Use a separate reset handler for tosa to reset the entire system and not just the CPU. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1477597646-24111-2-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28hw/arm/spitz: Fix reset handlingGuenter Roeck
Using the CPU reset handler for resets triggered by writing into gpio pins other than GPIO01 is not appropriate and does not work, since the reset triggered by writing into GPIO01 is configurable. Use a separate reset handler for spitz to reset the entire system and not just the CPU. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1477597646-24111-1-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28arm: virt: add PMU property to mach-virt machine typeWei Huang
CPU vPMU is now turned ON by default, but this feature wasn't introduced until virt-2.7 machine type. To solve this problem, this patch adds a PMU option in machine state, which is used to control CPU's vPMU status. This PMU option is not exposed to command line and is turned off in virt-2.6 machine type. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1477463301-17175-3-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28arm: Add an option to turn on/off vPMU supportWei Huang
This patch adds a pmu=[on/off] option to enable/disable vPMU support in guest vCPU. It allows virt tools, such as libvirt, to determine the exsitence of vPMU and configure it. Note this option is only available for cortex-a57/cortex-53/ host CPUs, but unavailable on ARMv7 and other processors. Also even though "pmu=" option is available for TCG mode, setting it doesn't turn PMU on. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1477463301-17175-2-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28versatilepb: do not run if user asks for more than 256MB RAMJean-Christophe Dubois
The versatilepb physical address space layout only has a 256MB region for RAM before the devices. Without a guard on the amount of RAM requested by the user we would happily create a RAM area that overlapped with the devices, resulting in very confusing behaviour (typically a guest crash). Report the problem to the user if they try to request more RAM than the board can handle (as we do already for some other board models). Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20161025093711.17407-1-jcd@tribudubois.net [PMM: tidied up commit message, comments. Use error_report() rather than fprintf(stderr, ...).] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255Guenter Roeck
The code used default values for PXA270 to configure CCCR. For PXA255, the resulting register value is invalid (unsupported) and resulted in a division by zero in the Linux kernel. Use default values from datasheet instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1477361273-18888-1-git-send-email-linux@roeck-us.net [PMM: fixed tabs-vs-spaces nit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28arm: cubieboard: Add support for initrdGuenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1477361131-18752-1-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-25Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell
staging x86 and CPU queue, 2016-10-24 x2APIC support to APIC code, cpu_exec_init() refactor on all architectures, and other x86 changes. # gpg: Signature made Mon 24 Oct 2016 20:51:14 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-pull-request: exec: call cpu_exec_exit() from a CPU unrealize common function exec: move cpu_exec_init() calls to realize functions exec: split cpu_exec_init() pc: q35: Bump max_cpus to 288 pc: Require IRQ remapping and EIM if there could be x2APIC CPUs pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs Increase MAX_CPUMASK_BITS from 255 to 288 pc: Clarify FW_CFG_MAX_CPUS usage comment pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC mode pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC mode pc: apic_common: Restore APIC ID to initial ID on reset pc: apic_common: Extend APIC ID property to 32bit pc: Leave max apic_id_limit only in legacy cpu hotplug code acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254 pc: acpi: x2APIC support for SRAT table pc: acpi: x2APIC support for MADT table and _MAT method Conflicts: target-arm/cpu.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24Increase MAX_CPUMASK_BITS from 255 to 288Igor Mammedov
so that it would be possible to increase maxcpus limit for x86 target. Keep spapr/virt_arm at limit they used to have 255. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24hw/arm: QOM'ify strongarm.cxiaoqiang zhao
Drop the old Sysbus init and use instance_init and DeviceClass::realize instead Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 20161023091816.3839-4-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/arm: QOM'ify pxa2xx_gpio.cxiaoqiang zhao
Drop the old Sysbus init and use instance_init and DeviceClass::realize instead Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 20161023091816.3839-3-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/arm: QOM'ify musicpal.cxiaoqiang zhao
Drop the old Sysbus init and use instance_init and DeviceClass::realize instead Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 20161023091816.3839-2-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24ARM: Virt: ACPI: Build an IORT table with RC and ITS nodesPrem Mallappa
This patch builds an IORT table that features a root complex node and an ITS node. This complements the ITS description in the ACPI MADT table and allows vhost-net on ACPI guest. Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1476707466-14300-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/arm/virt: Set minimum_page_bits to 12Peter Maydell
Since the virt board model will never create a CPU which is pre-ARMv7, we know that our minimum page size is 4K and can set minimum_page_bits accordingly, for improved performance. Note that this is a migration compatibility break, so we introduce it only for the virt-2.8 machine and onward; virt-2.7 continues using the old 1K pages. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-24char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau
No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: make some qemu_chr_fe skip if no driverMarc-André Lureau
In most cases, front ends do not care about the side effect of CharBackend, so we can simply skip the checks and call the qemu_chr_fe functions even without associated CharDriver. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinitMarc-André Lureau
Now that all front end use qemu_chr_fe_init(), we can move chardev claiming in init(), and add a function deinit() to release the chardev and cleanup handlers. The qemu_chr_fe_claim_no_fail() for property are gone, since the property will raise an error instead. In other cases, where there is already an error path, an error is raised instead. Finally, other cases are handled by &error_abort in qemu_chr_fe_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau
This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remaining switch to CharBackend in frontendMarc-André Lureau
Similar to previous change, for the remaining CharDriverState front ends users. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace PROP_CHR with CharBackendMarc-André Lureau
Store the property in a CharBackend instead of CharDriverState*. This also replace systematically chr by chr.chr to access the CharDriverState*. The following patches will replace it with calls to qemu_chr_fe CharBackend functions. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove init callbackMarc-André Lureau
The CharDriverState.init() callback is no longer set since commit a61ae7f88ce and thus unused. The only user, the malta FGPA display has been converted to use an event "opened" callback instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-17pxa2xx: Auto-assign name for i2c bus in i2c_init_bus.Vijay Kumar B
If a name is provided, the same name is assigned to both the I2C controllers. Leaving it NULL, causes names to be automatically assigned with an ID suffix, giving unique names to each controller. This helps us to uniquely identify each controller in the device tree, for example when adding an I2C device. Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Reviewed-by: Deepak S. <deepak@zilogic.com> Message-id: 1476351885-8905-1-git-send-email-vijaykumar@zilogic.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17hw/arm/virt: no ITS on older machine typesAndrew Jones
We should avoid exposing new hardware (through DT and ACPI) on older machine types. This patch keeps 2.7 and older from changing, despite the introduction of ITS support for 2.8. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1476117341-32690-3-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17hw/arm/virt-acpi-build: fix MADT generationAndrew Jones
We can't return early from build_* functions, as build_header is only called at the end. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1476117341-32690-2-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17hw/arm/boot: allow using a command line specified dtb without a kernelMichael Olbrich
When kernel and device tree are specified in the QEMU commandline, then this device tree may be modified e.g. to add virtio_mmio devices. With a bootloader e.g. on a flash device these extra devices are not available. With this change, the device tree can be specified at the QEMU commandline. The modified device tree made available to the bootloader with the same mechanism already supported by device trees fully generated by QEMU. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Message-id: 1473520054-402-1-git-send-email-m.olbrich@pengutronix.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: add support for the AST2500 SoC SMC controllersCédric Le Goater
The SMC controllers on the Aspeed AST2500 SoC are very similar to the ones found on the AST2400. The differences are on the number of supported flash modules and their default mappings in the SoC address space. The Aspeed AST2500 has one SPI controller for the BMC firmware and two for the host firmware. All controllers have now the same set of registers compatible with the AST2400 FMC controller and the legacy 'SMC' controller is fully gone. We keep the FMC object to act as the BMC SPI controller and add a new SPI controller for the host. We also have to introduce new type names to handle the differences in the flash modules memory mappping. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: extend the number of host SPI controllersCédric Le Goater
The AST2500 SoC has two. Let's prepare ground for the next changes which will add the required definitions for the second host SPI controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: move the flash module mapping address under the controller definitionCédric Le Goater
This will ease the definition of the new controllers for the AST2500 SoC and also ease the support of the segment registers, which provide a way to reconfigure the mapping window of each slave. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: rename the smc object to fmcCédric Le Goater
The Aspeed SoC has three different types of SMC (Static Memory Controller) controllers: the SMC (legacy), the FMC (the new one) and the SPI for the host PNOR. The FMC and the SPI models are now converging on the AST2500 SoC and the SMC, which was still available on the AST2400 SoC, was removed. The Aspeed SoC does not provide support for the legacy SMC controller. So, let's rename the 'smc' object to 'fmc' to clarify its nature. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-10Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pc: fixes and features more guest error handling for virtio devices virtio migration rework pc fixes Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 10 Oct 2016 00:39:11 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (33 commits) intel-iommu: Check IOAPIC's Trigger Mode against the one in IRTE virtio: cleanup VMSTATE_VIRTIO_DEVICE vhost-vsock: convert VMSTATE_VIRTIO_DEVICE virtio-rng: convert VMSTATE_VIRTIO_DEVICE virtio-balloon: convert VMSTATE_VIRTIO_DEVICE virtio-scsi: convert VMSTATE_VIRTIO_DEVICE virtio-input: convert VMSTATE_VIRTIO_DEVICE virtio-gpu: convert VMSTATE_VIRTIO_DEVICE virtio-serial: convert VMSTATE_VIRTIO_DEVICE virtio-9p: convert VMSTATE_VIRTIO_DEVICE virtio-net: convert VMSTATE_VIRTIO_DEVICE virtio-blk: convert VMSTATE_VIRTIO_DEVICE virtio: prepare change VMSTATE_VIRTIO_DEVICE macro net: don't poke at chardev internal QemuOpts virtio-scsi: handle virtio_scsi_set_config() error virtio-scsi: convert virtio_scsi_bad_req() to use virtio_error() virtio-net: handle virtio_net_flush_tx() errors virtio-net: handle virtio_net_receive() errors virtio-net: handle virtio_net_handle_ctrl() error virtio-blk: handle virtio_blk_handle_request() errors ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-10numa: reduce code duplication by adding helper numa_get_node_for_cpu()Igor Mammedov
Replace repeated pattern for (i = 0; i < nb_numa_nodes; i++) { if (test_bit(idx, numa_info[i].node_cpu)) { ... break; with a helper function to lookup numa node index for cpu. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-08bt-hci-csr: drop unused argumentPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-04ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT tableShannon Zhao
If GIC ITS is supported, add description in ACPI MADT table, then guest could use ITS when booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1474616617-366-9-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04arm/virt: Add ITS to the virt boardPavel Fedin
If supported by the configuration, ITS will be added automatically. This patch also renames v2m_phandle to msi_phandle because it's now used by both MSI implementations. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1474616617-366-7-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/arm/virt: add 2.8 machine typeAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1474641676-25017-1-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/arm: Fix Integrator/CM initializationJakub Jermar
Initialization of a class instance cannot depend on its own properties as these are not yet set. Move parts of integratorcm_init() that depend on the "memsz" property to the newly added integratorcm_realize(). This fixes: https://bugs.launchpad.net/qemu/+bug/1624726 Signed-off-by: Jakub Jermar <jakub@jermar.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04mainstone: Add mapping for dot, slash and backspace.Vijay Kumar B
Add missed out mappings. These mappings are from the "Intel PXA27x Processor Developer's Kit User Guide". Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Reviewed-by: Deepak S. <deepak@zilogic.com> Message-id: 1475063033-8176-3-git-send-email-vijaykumar@zilogic.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04mainstone: Fix incorrect key mapping for Enter key.Vijay Kumar B
According to the manual the (5, 5) corresponds to backspace key, and not Enter key. Linux kernel maps (5, 4) to the enter key. Fixing it up to match the mapping in the Linux kernel. Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Reviewed-by: Deepak S. <deepak@zilogic.com> Message-id: 1475063033-8176-2-git-send-email-vijaykumar@zilogic.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F205: Connect the SPI devicesAlistair Francis
Connect the SPI devices to the STM32F205 SoC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: d05849120420f8db0d9aa053bd23134c33cd9180.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F205: Connect the ADC devicesAlistair Francis
Connect the ADC devices to the STM32F205 SoC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Message-id: 6214eda399da7b47014f6f895be25323d52dbc9e.1474742262.git.alistair@alistair23.me Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F205: Remove the individual device variablesAlistair Francis
Cleanup the individual DeviceState and SysBusDevice variables to re-use the same variable for each device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fc5d75a57d320b69704df2c1146ff0fd482e4a88.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-27sysbus: Remove ignored return value of FindSysbusDeviceFuncDavid Gibson
Functions of type FindSysbusDeviceFunc currently return an integer. However, this return value is always ignored by the caller in find_sysbus_device(). This changes the function type to return void, to avoid confusion over the function semantics. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-09-22xlnx-zynqmp: Set the number of priority queuesAlistair Francis
Set the ZynqMP number of priority queues to 2. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: e047c338ee981a61afd7f765a317b3de25a4f629.1469727764.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22hw/ptimer: Introduce timer policy featureDmitry Osipenko
Some of the timer devices may behave differently from what ptimer provides. Introduce ptimer policy feature that allows ptimer users to change default and wrong timer behaviour, for example to continuously trigger periodic timer when load value is equal to "0". Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22aspeed: allocate RAM after the memory controller has checked the sizeCédric Le Goater
If the RAM size is invalid, the memory controller will use a default value. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1473438177-26079-15-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22aspeed: add a ram_size property to the memory controllerCédric Le Goater
Configure the size of the RAM of the SOC using a property to propagate the value down to the memory controller from the board level. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1473438177-26079-14-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22palmetto-bmc: remove extra no_sdcard assignementCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-11-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22arm: add support for an ast2500 evaluation boardCédric Le Goater
The ast2500 eval board has a hardware strapping register value of 0xF100C2E6 which we use for a definition of AST2500_EVB_HW_STRAP1 below. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-10-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22aspeed: add a ast2500 SoC and support to the SCU and SDMC controllersCédric Le Goater
Based on previous work done by Andrew Jeffery <andrew@aj.id.au>. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-9-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22hw/misc: use macros to define hw-strap1 register on the AST2400 Aspeed SoCCédric Le Goater
This gives some explanation behind the magic number 0x120CE416. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1473438177-26079-8-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 18:41:31 +0000