aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2020-06-23arm/aspeed: Drop aspeed_board_init_flashes() parameter @errpMarkus Armbruster
We always pass &error_abort. Drop the parameter, use &error_abort directly. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200622094227.1271650-15-armbru@redhat.com>
2020-06-23qdev: Make qdev_prop_set_drive() match the other helpersMarkus Armbruster
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO() can; they abort on error. To clean up this inconsistency, rename qdev_prop_set_drive() to qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that aborts on error. Coccinelle script to update callers: @ depends on !(file in "hw/core/qdev-properties-system.c")@ expression dev, name, value; symbol error_abort; @@ - qdev_prop_set_drive(dev, name, value, &error_abort); + qdev_prop_set_drive(dev, name, value); @@ expression dev, name, value, errp; @@ - qdev_prop_set_drive(dev, name, value, errp); + qdev_prop_set_drive_err(dev, name, value, errp); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
2020-06-23arm/virt: Add memory hot remove supportShameer Kolothum
This adds support for memory(pc-dimm) hot remove on arm/virt that uses acpi ged device. NVDIMM hot removal is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2-tz: Use the ARM SBCon two-wire serial bus interfacePhilippe Mathieu-Daudé
From 'Application Note AN521', chapter 4.7: The SMM implements four SBCon serial modules: One SBCon module for use by the Color LCD touch interface. One SBCon module to configure the audio controller. Two general purpose SBCon modules, that connect to the Expansion headers J7 and J8, are intended for use with the V2C-Shield1 which provide an I2C interface on the headers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-15-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Add audio I2S interface as unimplemented devicePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-14-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Add I2C devicesPhilippe Mathieu-Daudé
From 'Application Note AN385', chapter 3.14: The SMM implements a simple SBCon interface based on I2C. There are 4 SBCon interfaces on the FPGA APB subsystem. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-13-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Add SPI devicesPhilippe Mathieu-Daudé
From 'Application Note AN385', chapter 3.9, SPI: The SMM implements five PL022 SPI modules. Two pairs of modules share the same OR-gated IRQ. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-12-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Map the FPGA I/O blockPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-11-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Add CMSDK AHB GPIO peripherals as unimplemented devicesPhilippe Mathieu-Daudé
Register the GPIO peripherals as unimplemented to better follow their accesses, for example booting Zephyr: ---------------- IN: arm_mps2_pinmux_init 0x00001160: f64f 0231 movw r2, #0xf831 0x00001164: 4b06 ldr r3, [pc, #0x18] 0x00001166: 2000 movs r0, #0 0x00001168: 619a str r2, [r3, #0x18] 0x0000116a: f24c 426f movw r2, #0xc46f 0x0000116e: f503 5380 add.w r3, r3, #0x1000 0x00001172: 619a str r2, [r3, #0x18] 0x00001174: f44f 529e mov.w r2, #0x13c0 0x00001178: f503 5380 add.w r3, r3, #0x1000 0x0000117c: 619a str r2, [r3, #0x18] 0x0000117e: 4770 bx lr cmsdk-ahb-gpio: unimplemented device write (size 4, value 0xf831, offset 0x18) cmsdk-ahb-gpio: unimplemented device write (size 4, value 0xc46f, offset 0x18) cmsdk-ahb-gpio: unimplemented device write (size 4, value 0x13c0, offset 0x18) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Add CMSDK APB watchdog devicePhilippe Mathieu-Daudé
We already model the CMSDK APB watchdog device, let's use it! Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Rename CMSDK AHB peripheral regionPhilippe Mathieu-Daudé
To differenciate with the CMSDK APB peripheral region, rename this region 'CMSDK AHB peripheral region'. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/mps2: Document CMSDK/FPGA APB subsystem sectionsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm: Use TYPE_VERSATILE_I2C instead of hardcoded stringPhilippe Mathieu-Daudé
By using the TYPE_* definitions for devices, we can: - quickly find where devices are used with 'git-grep' - easily rename a device (one-line change). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200617072539.32686-6-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23hw/arm/virt: Add 5.0 HW compat propsAndrew Jones
Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20200616140803.25515-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-16Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200616' into staging * hw: arm: Set vendor property for IMX SDHCI emulations * sd: sdhci: Implement basic vendor specific register support * hw/net/imx_fec: Convert debug fprintf() to trace events * target/arm/cpu: adjust virtual time for all KVM arm cpus * Implement configurable descriptor size in ftgmac100 * hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers * target/arm: More Neon decodetree conversion work # gpg: Signature made Tue 16 Jun 2020 10:56:10 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200616: (23 commits) hw: arm: Set vendor property for IMX SDHCI emulations sd: sdhci: Implement basic vendor specific register support hw/net/imx_fec: Convert debug fprintf() to trace events target/arm/cpu: adjust virtual time for all KVM arm cpus Implement configurable descriptor size in ftgmac100 hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers target/arm: Convert Neon VDUP (scalar) to decodetree target/arm: Convert Neon VTBL, VTBX to decodetree target/arm: Convert Neon VEXT to decodetree target/arm: Convert Neon 2-reg-scalar long multiplies to decodetree target/arm: Convert Neon 2-reg-scalar VQRDMLAH, VQRDMLSH to decodetree target/arm: Convert Neon 2-reg-scalar VQDMULH, VQRDMULH to decodetree target/arm: Convert Neon 2-reg-scalar float multiplies to decodetree target/arm: Convert Neon 2-reg-scalar integer multiplies to decodetree target/arm: Add missing TCG temp free in do_2shift_env_64() target/arm: Add 'static' and 'const' annotations to VSHLL function arrays target/arm: Convert Neon 3-reg-diff polynomial VMULL target/arm: Convert Neon 3-reg-diff saturating doubling multiplies target/arm: Convert Neon 3-reg-diff long multiplies target/arm: Convert Neon 3-reg-diff VABAL, VABDL to decodetree ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/arm/fsl-imx25.c # hw/arm/fsl-imx6.c # hw/arm/fsl-imx6ul.c # hw/arm/fsl-imx7.c
2020-06-16hw: arm: Set vendor property for IMX SDHCI emulationsGuenter Roeck
Set vendor property to IMX to enable IMX specific functionality in sdhci code. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200603145258.195920-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-15microbit: Eliminate two local variables in microbit_init()Markus Armbruster
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-53-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4Markus Armbruster
This is still the same transformation as in the previous commits, but here the sysbus_init_child_obj() and its matching realize in are in separate files. Fortunately, there's just one realize left to convert. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-51-armbru@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3Markus Armbruster
These are init/realize pairs produced by the previous commit's Coccinelle script where the argument test doesn't quite match. They need even more careful review. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-50-armbru@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2Markus Armbruster
This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1Markus Armbruster
I'm converting from qdev_set_parent_bus()/realize to qdev_realize(); recent commit "qdev: Convert uses of qdev_set_parent_bus() with Coccinelle" explains why. sysbus_init_child_obj() is a wrapper around object_initialize_child_with_props() and qdev_set_parent_bus(). It passes no properties. Convert sysbus_init_child_obj()/realize to object_initialize_child()/ qdev_realize(). Coccinelle script: @@ expression parent, name, size, type, errp; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, &child, size, type); + sysbus_init_child_XXX(parent, name, &child, size, type); ... - object_property_set_bool(OBJECT(&child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(&child), errp); @@ expression parent, name, size, type, errp; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); ... - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); @@ expression parent, name, size, type; expression child; expression dev; expression expr; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); ... dev = DEVICE(child); ... when != dev = expr; - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-48-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2Markus Armbruster
The callers of sysbus_init_child_obj() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use something else instead, mostly to keep future commits simpler. Coccinelle script: @@ expression parent, propname, type; expression child; type T; T proxy; @@ ( sysbus_init_child_obj(parent, propname, &child, sizeof(child), type) | sysbus_init_child_obj(parent, propname, child, sizeof(*child), type) | - sysbus_init_child_obj(parent, propname, child, sizeof(proxy), type) + sysbus_init_child_obj(parent, propname, child, sizeof(*child), type) ) This script is *unsound*: for each change we need to verify the @childsize argument stays the same. I did. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-44-armbru@redhat.com>
2020-06-15hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()Markus Armbruster
armsse_init() initializes s->armv7m[i] for all i. It passes the size of the entire array instead of the array element to sysbus_init_child_obj(). Harmless, but fix it anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-43-armbru@redhat.com>
2020-06-15sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1Markus Armbruster
The callers of sysbus_init_child_obj() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use sizeof(child_type) instead, mostly to keep future commits simpler. Coccinelle script: @@ expression parent, propname, type; type T; T child; @@ - sysbus_init_child_obj(parent, propname, &child, sizeof(T), type) + sysbus_init_child_obj(parent, propname, &child, sizeof(child), type) @@ expression parent, propname, type; type T; T *child; @@ - sysbus_init_child_obj(parent, propname, child, sizeof(T), type) + sysbus_init_child_obj(parent, propname, child, sizeof(*child), type) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-42-armbru@redhat.com>
2020-06-15microbit: Tidy up sysbus_init_child_obj() @child argumentMarkus Armbruster
The callers of sysbus_init_child_obj() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up two that don't, mostly to keep future commits simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-41-armbru@redhat.com>
2020-06-15sysbus: Drop useless OBJECT() in sysbus_init_child_obj() callsMarkus Armbruster
OBJECT(child) expands to ((Object *)(child)). sysbus_init_child_obj() parameter @child is void *. Pass child instead of OBJECT(child). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-40-armbru@redhat.com>
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15qom: Tidy up a few object_initialize_child() callsMarkus Armbruster
The callers of object_initialize_child() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that don't, mostly to keep the next commit simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-36-armbru@redhat.com>
2020-06-15ssi: Convert uses of ssi_create_slave_no_init() with CoccinelleMarkus Armbruster
Replace dev = ssi_create_slave_no_init(bus, type_name); ... qdev_init_nofail(dev); by dev = qdev_new(type_name); ... qdev_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. @@ type SSIBus; identifier bus; expression dev, qbus, expr; expression list args; @@ - bus = (SSIBus *)qbus; + bus = qbus; // TODO fix up decl ... - dev = ssi_create_slave_no_init(bus, args); + dev = qdev_new(args); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = ssi_create_slave_no_init(bus, args); + dev = qdev_new(args); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, BUS(bus), &error_fatal); Bus declarations fixed up manually. Cc: Alistair Francis <alistair@alistair23.me> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-24-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() manuallyMarkus Armbruster
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15armv7m: Delete unused "ARM,bitband-memory" devicesMarkus Armbruster
These devices are optional, and enabled by property "enable-bitband". armv7m_instance_init() creates them unconditionally, because the property has not been set then. armv7m_realize() realizes them only when the property is true. Works, although it leaves unrealized devices hanging around in the QOM composition tree. Affects machines microbit, mps2-an505, mps2-an521, musca-a, and musca-b1. Delete the unused devices by making armv7m_realize() unparent them. Visible in "info qom-tree"; here's the change for microbit: /machine (microbit-machine) /microbit.twi (microbit.i2c) /microbit.twi[0] (qemu:memory-region) /nrf51 (nrf51-soc) /armv6m (armv7m) /armv7m-container[0] (qemu:memory-region) - /bitband[0] (ARM,bitband-memory) - /bitband[0] (qemu:memory-region) - /bitband[1] (ARM,bitband-memory) - /bitband[0] (qemu:memory-region) /cpu (cortex-m0-arm-cpu) Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200609122339.937862-7-armbru@redhat.com>
2020-06-15arm/aspeed: Rework NIC attachmentCédric Le Goater
The number of MACs supported by an Aspeed SoC is defined by "macs_num" under the SoC model, that is two for the AST2400 and AST2500 and four for the AST2600. The model initializes the maximum number of supported MACs but the number of realized devices is capped by the number of network device back-ends defined on the command line. This can leave unrealized devices hanging around in the QOM composition tree. To get virtual hardware that matches the physical hardware, you have to pass exactly as many -nic options as there are MACs, and some of them must be -nic none: * Machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc: two -nic, and the second one must be -nic none. * Machine ast2600-evb: four -nic, the first one must be -nic none. * Machine tacoma-bmc: four nic, the first two and the last one must be -nic none. Modify the machine initialization to define which MACs are attached to a network device back-end using a bit-field property "macs-mask" and let the SoC realize all network devices. The default setting of "macs-mask" is "use MAC0" only, which works for all our AST2400 and AST2500 machines. The AST2600 machines have different configurations. The AST2600 EVB machine activates MAC1, MAC2 and MAC3 and the Tacoma BMC machine activates MAC2. Incompatible CLI change: -nic options now apply to *active* MACs: MAC1, MAC2, MAC3 for ast2600-evb, MAC2 for tacoma-bmc, and MAC0 for all the others. The machines now always get all MACs as they should. Visible in "info qom-tree", here's the change for tacoma-bmc: /machine (tacoma-bmc-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) [...] /ftgmac100[0] (ftgmac100) /ftgmac100[0] (qemu:memory-region) /ftgmac100[1] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[2] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[3] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) [...] /mii[0] (aspeed-mmi) /aspeed-mmi[0] (qemu:memory-region) /mii[1] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[2] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[3] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) Also visible in "info qtree"; here's the change for tacoma-bmc: dev: ftgmac100, id "" gpio-out "sysbus-irq" 1 aspeed = true - mac = "52:54:00:12:34:56" - netdev = "hub0port0" + mac = "52:54:00:12:34:57" + netdev = "" mmio 000000001e660000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:58" netdev = "" + mmio 000000001e680000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" - netdev = "" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:56" + netdev = "hub0port0" + mmio 000000001e670000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:59" netdev = "" + mmio 000000001e690000/0000000000002000 [...] dev: aspeed-mmi, id "" mmio 000000001e650000/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650008/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650010/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650018/0000000000000008 Inactive MACs will have no peer and QEMU may warn the user with : qemu-system-arm: warning: nic ftgmac100.0 has no peer qemu-system-arm: warning: nic ftgmac100.1 has no peer qemu-system-arm: warning: nic ftgmac100.3 has no peer Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-6-armbru@redhat.com>
2020-06-15arm/aspeed: Compute the number of CPUs from the SoC definitionCédric Le Goater
Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-15arm/stm32f405: Fix realization of "stm32f2xx-adc" devicesMarkus Armbruster
stm32f405_soc_initfn() creates six such devices, but stm32f405_soc_realize() realizes only one. Affects machine netduinoplus2. In theory, a device becomes real only on realize. In practice, the transition from unreal to real is a fuzzy one. The work to make a device real can be spread between realize methods (fine), instance_init methods (wrong), and board code wiring up the device (fine as long as it effectively happens on realize). Depending on what exactly is done where, a device can work even when we neglect to realize it. The five unrealized devices appear to stay unreal: neither MMIO nor IRQ get wired up. Fix stm32f405_soc_realize() to realize and wire up all six. Visible in "info qtree": bus: main-system-bus type System dev: stm32f405-soc, id "" cpu-type = "cortex-m4-arm-cpu" dev: stm32f2xx-adc, id "" gpio-out "sysbus-irq" 1 - mmio ffffffffffffffff/00000000000000ff + mmio 0000000040012000/00000000000000ff dev: stm32f2xx-adc, id "" gpio-out "sysbus-irq" 1 - mmio ffffffffffffffff/00000000000000ff + mmio 0000000040012100/00000000000000ff dev: stm32f2xx-adc, id "" gpio-out "sysbus-irq" 1 - mmio ffffffffffffffff/00000000000000ff + mmio 0000000040012200/00000000000000ff dev: stm32f2xx-adc, id "" gpio-out "sysbus-irq" 1 - mmio ffffffffffffffff/00000000000000ff + mmio 0000000040012300/00000000000000ff dev: stm32f2xx-adc, id "" gpio-out "sysbus-irq" 1 - mmio 0000000040012000/00000000000000ff + mmio 0000000040012400/00000000000000ff dev: stm32f2xx-adc, id "" gpio-out "sysbus-irq" 1 - mmio ffffffffffffffff/00000000000000ff + mmio 0000000040012500/00000000000000ff dev: armv7m, id "" Fixes: 529fc5fd3e18ace8f739afd02dc0953354f39442 Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200609122339.937862-2-armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,acpi,pci: features, fixes, cleanups, tests Max slots negotiation for vhost-user. Free page reporting for balloon. Partial TPM2 ACPI support for ARM. Support for NVDIMMs having their own proximity domains. New vhost-user-vsock device. Fixes, cleanups in ACPI, PCI, virtio. New tests for TPM ACPI. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 12 Jun 2020 15:18:04 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (58 commits) virtio-pci: fix queue_enable write pci: Display PCI IRQ pin in "info pci" Fix parameter type in vhost migration log path acpi: ged: rename event memory region acpi: fadt: add hw-reduced sleep register support acpi: madt: skip pci override on pci-less systems. acpi: create acpi-common.c and move madt code acpi: make build_madt() more generic. virtio: add vhost-user-vsock-pci device virtio: add vhost-user-vsock base device vhost-vsock: add vhost-vsock-common abstraction hw/pci: Fix crash when running QEMU with "-nic model=rocker" libvhost-user: advertise vring features Lift max ram slots limit in libvhost-user Support individual region unmap in libvhost-user Support adding individual regions in libvhost-user Support ram slot configuration in libvhost-user Refactor out libvhost-user fault generation logic Lift max memory slots limit imposed by vhost-user Transmit vhost-user memory regions individually ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-09hw/arm/aspeed: Correct DRAM container region sizePhilippe Mathieu-Daudé
memory_region_set_size() handle the 16 Exabytes limit by special-casing the UINT64_MAX value. This is not a problem for the 32-bit maximum, 4 GiB. By using the UINT32_MAX value, the aspeed-ram-container MemoryRegion ends up missing 1 byte: $ qemu-system-arm -M ast2600-evb -S -monitor stdio (qemu) info mtree address-space: aspeed.fmc-ast2600-dma-dram 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000bfffffff (prio 0, ram): ram 00000000c0000000-ffffffffffffffff (prio 0, i/o): max_ram Fix by using the correct value. We now have: address-space: aspeed.fmc-ast2600-dma-dram 0000000080000000-000000017fffffff (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000bfffffff (prio 0, ram): ram 00000000c0000000-ffffffffffffffff (prio 0, i/o): max_ram Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200601142930.29408-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-09arm/acpi: TPM2 ACPI table supportEric Auger
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been dynamically instantiated. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/acpi/nvdimm: add a helper to augment SRAT generationVishal Verma
NVDIMMs can belong to their own proximity domains, as described by the NFIT. In such cases, the SRAT needs to have Memory Affinity structures in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node data structures properly during NUMA initialization. See the following for an example failure case. https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/ Introduce a new helper, nvdimm_build_srat(), and call it for both the i386 and arm versions of 'build_srat()' to augment the SRAT with memory affinity information for NVDIMMs. The relevant command line options to exercise this are below. Nodes 0-1 contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address space. -object memory-backend-ram,id=mem0,size=2048M -numa node,nodeid=0,memdev=mem0, -numa cpu,node-id=0,socket-id=0 -object memory-backend-ram,id=mem1,size=2048M -numa node,nodeid=1,memdev=mem1, -numa cpu,node-id=1,socket-id=1 -numa node,nodeid=2, -object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G -device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2 -numa node,nodeid=3, -object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G -device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3 Cc: Jingqi Liu <jingqi.liu@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-05wire in the dwc-hsotg (dwc2) USB host controller emulationPaul Zimmerman
Wire the dwc-hsotg (dwc2) emulation into Qemu Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org> Message-id: 20200520235349.21215-7-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05raspi: add BCM2835 SOC MPHI emulationPaul Zimmerman
Add BCM2835 SOC MPHI (Message-based Parallel Host Interface) emulation. It is very basic, only providing the FIQ interrupt needed to allow the dwc-otg USB host controller driver in the Raspbian kernel to function. Signed-off-by: Paul Zimmerman <pauldzim@gmail.com> Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200520235349.21215-2-pauldzim@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()Philippe Mathieu-Daudé
Replace printf() calls by qemu_log_mask(), which is disabled by default. This avoid flooding the terminal when fuzzing the device. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200525114123.21317-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-27arm/sabrelite: Consistently use &error_fatal in sabrelite_init()Markus Armbruster
Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200505101908.6207-10-armbru@redhat.com> [Straightforward conflict with resolved d2623129a7 "qom: Drop parameter @errp of object_property_add() & friends"]
2020-05-21hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/integratorcp: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx7: Connect watchdog interruptsGuenter Roeck
i.MX7 supports watchdog pretimeout interupts. With this commit, the watchdog in mcimx7d-sabre is fully operational, including pretimeout support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx7: Instantiate various unimplemented devicesGuenter Roeck
Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid crashes when booting mainline Linux. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-8-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21hw/arm/fsl-imx6ul: Connect watchdog interruptsGuenter Roeck
With this commit, the watchdog on mcimx6ul-evk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-7-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 07:07:38 +0000