aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2018-11-02hw/arm/nrf51_soc: Connect UART to nRF51 SoCJulia Suvorova
Wire up nRF51 UART in the corresponding SoC. Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-02hw/arm/virt: Set VIRT_COMPAT_3_0 compatEric Auger
We are missing the VIRT_COMPAT_3_0 definition and setting. Let's add them. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20181024085602.16611-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-29audio: use TYPE_MV88W8618_AUDIO instead of hardcoded stringMao Zhongyi
Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181022074050.19638-4-maozhongyi@cmss.chinamobile.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-29audio: use object link instead of qdev property to pass wm8750 referenceMao Zhongyi
According to qdev-properties.h, properties of pointer type should be avoided, it seems a link type property is a good substitution. Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181022074050.19638-3-maozhongyi@cmss.chinamobile.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-29audio: use TYPE_WM8750 instead of a hardcoded stringMao Zhongyi
Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181022074050.19638-2-maozhongyi@cmss.chinamobile.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-24hw/arm/boot: Increase compliance with kernel arm64 boot protocolStewart Hildebrand
"The Image must be placed text_offset bytes from a 2MB aligned base address anywhere in usable system RAM and called there." For the virt board, we write our startup bootloader at the very bottom of RAM, so that bit can't be used for the image. To avoid overlap in case the image requests to be loaded at an offset smaller than our bootloader, we increment the load offset to the next 2MB. This fixes a boot failure for Xen AArch64. Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Message-id: b8a89518794b4436af0c151ed10de4fa@dornerworks.com [PMM: Rephrased a comment a bit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-16hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UARTJerome Forissier
Bindings for /secure-chosen and /secure-chosen/stdout-path have been proposed 1.5 years ago [1] and implemented in OP-TEE at the same time [2]. They've now been officially agreed on, so we can implement them in QEMU. This patch creates the property when the machine is secure. [1] https://patchwork.kernel.org/patch/9602401/ [2] https://github.com/OP-TEE/optee_os/commit/4dc31c52544a Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Message-id: 20181005080729.6480-1-jerome.forissier@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-15hw/arm/virt: Allow dynamic vfio-platform devices againGeert Uytterhoeven
Allow the instantation of generic dynamic vfio-platform devices again, without the need to create a new device-specific vfio type. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-15hw/arm/sysbus-fdt: Allow device matching with DT compatible valueEric Auger
Up to now we have relied on the device type to identify a device tree node creation function. Since we would like the vfio-platform device to be instantiable with different compatible strings we introduce the capability to specialize the node creation depending on actual compatible value. NodeCreationPair is renamed into BindingEntry. The struct is enhanced with compat and match_fn() fields. We introduce a new matching function adapted to the vfio-platform generic device. Soon, the AMD XGBE can be instantiated with either manner, i.e.: -device vfio-amd-xgbe,host=e0900000.xgmac or using the new option line: -device vfio-platform,host=e0900000.xgmac Signed-off-by: Eric Auger <eric.auger@redhat.com> [geert: Match using compatible values in sysfs instead of user-supplied manufacturer/model options, reword] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-10-08virt: Suppress external aborts on virt-2.10 and earlierPeter Maydell
In commit c79c0a314c43b78 we enabled emulation of external aborts when the guest attempts to access a physical address with no mapped device. In commit 4672cbd7bed88dc6 we suppress this for most legacy boards to prevent breakage of previously working guests, but we didn't suppress it in the 'virt' board, with the rationale "we know that guests won't try to prod devices that we don't describe in the device tree or ACPI tables". This is mostly true, but we've had a report of a Linux guest image that this did break. The problem seems to be that the guest is (incorrectly) configured with a DEBUG_UART_PHYS value that tells it there is a uart at 0x10009000 (which is true for vexpress but not for virt), so in early bootup the kernel probes this bogus address. This is a misconfigured guest, so we don't need to worry about it too much, but we can arrange that guests that ran on QEMU v2.10 (before c79c0a314c43b78) will still run on the "virt-2.10" board model, by suppressing external aborts only for that version and earlier. This seems a reasonable compromise: "virt-2.10" is supposed to behave the same way that "virt" did in the 2.10 release, and making it do that provides a usable workaround for guests with bugs like this. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180925144127.31965-1-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-09-25hw/arm/aspeed: Add an Aspeed machine classCédric Le Goater
The code looks better, it removes duplicated lines and it will ease the introduction of common properties for the Aspeed machines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180921161939.822-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/aspeed: change the FMC flash model of the AST2500 evbCédric Le Goater
The AST2500 evb is shipped with a W25Q256 which has a non volatile bit to make the chip operate in 4 Byte address mode at power up. This should be an interesting feature to model as it will exercise a bit more the SMC controllers and MMIO execution at boot time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180921161939.822-3-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/smmuv3: fix eventq recording and IRQ triggerringEric Auger
The event queue management is broken today. Event records are not properly written as EVT_SET_* macro was not updating the actual event record. Also the event queue interrupt is not correctly triggered. Fixes: bb981004eaf4 ("hw/arm/smmuv3: Event queue recording helper") Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180921070138.10114-3-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/smmu-common: Fix the name of the iommu memory regionsEric Auger
At the point smmu_find_add_as() gets called, the bus number might not be computed. Let's change the name of IOMMU memory region and just use the devfn and an incrementing index. The name only is used for debug. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180921070138.10114-2-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: changed 'uint' to 'unsigned int'] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25arm: Add BBC micro:bit machineJoel Stanley
This adds the base for a machine model of the BBC micro:bit: https://en.wikipedia.org/wiki/Micro_Bit This is a system with a nRF51 SoC containing the main processor, with various peripherals on board. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20180831220920.27113-4-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25arm: Add Nordic Semiconductor nRF51 SoCJoel Stanley
The nRF51 is a Cortex-M0 microcontroller with an on-board radio module, plus other common ARM SoC peripherals. http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf This defines a basic model of the CPU and memory, with no peripherals implemented at this stage. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20180831220920.27113-3-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: wrapped a few long lines] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/virt-acpi-build: Add a check for memory-less NUMA nodesShannon Zhao
Like commit 16b4226(hw/acpi-build: Add a check for memory-less NUMA node ), it also needs to check memory length for NUMA nodes on ARM. Signed-off-by: Shannon Zhao <shannon.zhaosl@gmail.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180911112643.19296-1-shenglong.zsl@alibaba-inc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/exynos4210: fix Exynos4210 UART supportBartlomiej Zolnierkiewicz
commit 97274d0c05d4 ("hw/char/exynos4210_uart.c: Remove unneeded handling of NULL chardev") broke Exynos4210 support as it removed NULL 'Chardev *chr' handling from exynos4210_uart_create() and currently exynos4210_init() always passes NULL as 'Chardev *chr' argument to exynos4210_uart_create() calls. Fix it by adding missing serial_hd() calls to exynos4210_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 9310418.Wg32kryeWE@amdc3058 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()Mark Cave-Ayland
As part of commits a64aa5785d "hw: Deprecate -drive if=scsi with non-onboard HBAs" and b891538e81 "hw/ppc/prep: Fix implicit creation of "-drive if=scsi" devices" the lsi53c895a_create() and lsi53c810_create() functions were added to wrap pci_create_simple() and scsi_bus_legacy_handle_cmdline(). Unfortunately this prevents us from changing qdev properties on the device and/or changing the PCI configuration. By switching over to using the new lsi53c8xx_handle_legacy_cmdline() function then the caller can now configure and realize the LSI SCSI device exactly as required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> [arm parts] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-24hw/arm/mps2: Fix ID register errors on AN511 and AN385Peter Maydell
Fix MPS2 SCC config register values for the mps2-an511 and mps2-an385 boards: * the SCC_AID bits [23:20] specify the FPGA build target board revision, and the SCC_CFG4 register specifies the actual board revision, so these should have matching values. Claim to be board revision C, consistently -- we had the revision in the wrong part of SCC_AID. * SCC_ID bits [15:4] should be the board number in hex, not decimal Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180823175225.22612-1-peter.maydell@linaro.org
2018-08-24hw/arm/mps2-tz: Fix MPS2 SCC config register valuesPeter Maydell
Some of the config register values we were setting for the MPS2 SCC weren't correct: * the SCC_AID bits [23:20] specify the FPGA build target board revision, and the SCC_CFG4 register specifies the actual board revision, so these should have matching values. Claim to be board revision C, consistently -- we had the revision in the wrong part of SCC_AID. * SCC_ID bits [15:4] should be 0x505, not decimal 505 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-23-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24hw/arm/mps2-tz: Instantiate SPI controllersPeter Maydell
The SPI controllers in the MPS2 AN505 board are PL022s. We have a model of the PL022, so create these devices. We don't currently model the LCD controller that sits behind one of the PL022s; the others are intended to control devices that sit on the FPGA's general purpose SPI connector or "shield" expansion connectors. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-22-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24hw/arm/mps2-tz: Create PL081s and MSCsPeter Maydell
The AN505 FPGA image includes four PL081 DMA controllers, each of which is gated by a Master Security Controller that allows the guest to prevent a non-secure DMA controller from accessing memory that is used by secure guest code. Create and wire up these devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-15-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24hw/arm/iotkit: Wire up the lines for MSCsPeter Maydell
The IoTKit doesn't have any MSCs itself but it does need some wiring to connect the external signals from MSCs in the outer board model up to the registers and the NVIC IRQ line. We also need to expose a MemoryRegion corresponding to the AHB bus, so that MSCs in the outer board model can use that as their downstream port. (In the FPGA this is the "AHB Slave Expansion" ports shown in the block diagram in the AN505 documentation.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-14-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24hw/misc/iotkit: Wire up the sysctl and sysinfo register blocksPeter Maydell
Wire up the system control element's register banks (sysctl and sysinfo). This is the last of the previously completely unimplemented components in the IoTKit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-11-peter.maydell@linaro.org
2018-08-24hw/arm/iotkit: Wire up the S32KTIMERPeter Maydell
The IoTKit has a CMSDK timer device that runs on the S32KCLK. Create this and wire it up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-8-peter.maydell@linaro.org
2018-08-24hw/arm/iotkit: Wire up the watchdogsPeter Maydell
The IoTKit includes three different instances of the CMSDK APB watchdog; create and wire them up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-7-peter.maydell@linaro.org
2018-08-24hw/arm/mps2: Wire up dual-timer in mps2-an385 and mps2-an511Peter Maydell
The MPS2 FPGA images for the Cortex-M3 (mps2-an385 and mps2-511) both include a CMSDK dual-timer module. Wire this up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-6-peter.maydell@linaro.org
2018-08-24hw/arm/iotkit: Wire up the dualtimerPeter Maydell
Now we have a model of the CMSDK dual timer, we can wire it up in the IoTKit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-5-peter.maydell@linaro.org
2018-08-24hw/arm/boot: AArch32 kernels should be started in Hyp mode if availablePeter Maydell
The kernel booting specification for an AArch32 kernel requires that it is booted in Hyp mode if available; otherwise the kernel can't enable KVM. We were incorrectly leaving the kernel in SVC mode. If we're booting an AArch32 kernel in the Nonsecure state and Hyp mode is available, start in it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180820153020.21478-7-peter.maydell@linaro.org
2018-08-24hw/arm/vexpress: Add "virtualization" property controlling presence of EL2Peter Maydell
Add a "virtualization" property to the vexpress-a15 board, controlling presence of EL2. As with EL3, we default to enabling it, but the user can disable it if they have an older guest which can't cope with it being present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-10-peter.maydell@linaro.org
2018-08-24hw/arm/vexpress: Don't set info->secure_boot if CPU doesn't have EL3Peter Maydell
Don't request that the arm_load_kernel() code should boot in secure state if the CPU doesn't have a secure state. Currently this doesn't make a difference because the boot.c code only examines the secure_boot flag in code guarded by an ARM_FEATURE_EL3 check, but upcoming changes for supporting booting into Hyp mode will change that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-9-peter.maydell@linaro.org
2018-08-24hw/arm/fsl-imx6ul: Connect VIRQ and VFIQPeter Maydell
Connect the VIRQ and VFIQ lines from the GIC to the CPU; these exist always for both CPU and GIC whether the virtualization extensions are enabled or not, so we can just unconditionally connect them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-7-peter.maydell@linaro.org
2018-08-24hw/arm/fsl-imx6ul: Connect VIRQ and VFIQPeter Maydell
Connect the VIRQ and VFIQ lines from the GIC to the CPU; these exist always for both CPU and GIC whether the virtualization extensions are enabled or not, so we can just unconditionally connect them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-6-peter.maydell@linaro.org
2018-08-24hw/arm/highbank: Connect VIRQ and VFIQPeter Maydell
Connect the VIRQ and VFIQ lines from the GIC to the CPU; these exist always for both CPU and GIC whether the virtualization extensions are enabled or not, so we can just unconditionally connect them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-5-peter.maydell@linaro.org
2018-08-24hw/arm/vexpress: Connect VIRQ and VFIQPeter Maydell
Connect the VIRQ and VFIQ lines from the GIC to the CPU; these exist always for both CPU and GIC whether the virtualization extensions are enabled or not, so we can just unconditionally connect them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20180821132811.17675-4-peter.maydell@linaro.org
2018-08-23fix "Missing break in switch" coverity reportsPaolo Bonzini
Many of these are marked as "intentional/fix required" because they just need adding a fall through comment. This is exactly what this patch does, except for target/mips/translate.c where it is easier to duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox sources and decide to just remove the LOG_UNIMP before the fallthrough. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-20hw/dma/pl080: Don't use CPU address space for DMA accessesPeter Maydell
Currently our PL080/PL081 model uses a combination of the CPU's address space (via cpu_physical_memory_{read,write}()) and the system address space for performing DMA accesses. For the PL081s in the MPS FPGA images, their DMA accesses must go via Master Security Controllers. Switch the PL080/PL081 model to take a MemoryRegion property which defines its downstream for making DMA accesses. Since the PL08x are only used in two board models, we make provision of the 'downstream' link mandatory and convert both users at once, rather than having it be optional with a default to the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20nvic: Expose NMI linePeter Maydell
On real v7M hardware, the NMI line is an externally visible signal that an SoC or board can toggle to assert an NMI. Expose it in our QEMU NVIC and armv7m container objects so that a board model can wire it up if it needs to. In particular, the MPS2 watchdog is wired to NMI. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20hw/arm/virt: Add virt-3.1 machine typeAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj()Thomas Huth
Now that we've got the common sysbus_init_child_obj() function, we do not need the local init_sysbus_child() anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1534420566-15799-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16aspeed: add a max_ram_size property to the memory controllerCédric Le Goater
This will be used to construct a memory region beyond the RAM region to let firmwares scan the address space with load/store to guess how much RAM the SoC has. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-7-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16hw/arm: make bitbanded IO optional on ARMv7-MStefan Hajnoczi
Some ARM CPUs have bitbanded IO, a memory region that allows convenient bit access via 32-bit memory loads/stores. This eliminates the need for read-modify-update instruction sequences. This patch makes this optional feature an ARMv7MState qdev property, allowing boards to choose whether they want bitbanding or not. Status of boards: * iotkit (Cortex M33), no bitband * mps2 (Cortex M3), bitband * msf2 (Cortex M3), bitband * stellaris (Cortex M3), bitband * stm32f205 (Cortex M3), bitband As a side-effect of this patch, Peter Maydell noted that the Ethernet controller on mps2 board is now accessible. Previously they were hidden by the bitband region (which does not exist on the real board). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK BoardJean-Christophe Dubois
Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the emulated board. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3f8eb4300206634dc01e04b12f65b73c0ad2f955.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16i.MX6UL: Add i.MX6UL SOCJean-Christophe Dubois
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3853ec555d68e7e25d726170833b775796151a07.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14arm: Fix return code of arm_load_elfAdam Lackorzynski
Use an int64_t as a return type to restore the negative check for arm_load_as. Signed-off-by: Adam Lackorzynski <adam@l4re.org> Message-id: 20180730173712.GG4987@os.inf.tu-dresden.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14arm/virt: Add support for GICv2 virtualization extensionsLuc Michel
Add support for GICv2 virtualization extensions by mapping the necessary I/O regions and connecting the maintenance IRQ lines. Declare those additions in the device tree and in the ACPI tables. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180727095421.386-21-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14xlnx-zynqmp: Improve GIC wiring and MMIO mappingLuc Michel
This commit improve the way the GIC is realized and connected in the ZynqMP SoC. The security extensions are enabled only if requested in the machine state. The same goes for the virtualization extensions. All the GIC to APU CPU(s) IRQ lines are now connected, including FIQ, vIRQ and vFIQ. The missing CPU to GIC timers IRQ connections are also added (HYP and SEC timers). The GIC maintenance IRQs are back-wired to the correct GIC PPIs. Finally, the MMIO mappings are reworked to take into account the ZynqMP specifics. The GIC (v)CPU interface is aliased 16 times: * for the first 0x1000 bytes from 0xf9010000 to 0xf901f000 * for the second 0x1000 bytes from 0xf9020000 to 0xf902f000 Mappings of the virtual interface and virtual CPU interface are mapped only when virtualization extensions are requested. The XlnxZynqMPGICRegion struct has been enhanced to be able to catch all this information. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20180727095421.386-20-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30hw/arm/iotkit: Fix IRQ number for timer1Peter Maydell
A cut-and-paste error meant we were incorrectly wiring up the timer1 IRQ to IRQ3. IRQ3 is the interrupt for timer0 -- move timer0 to IRQ4 where it belongs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727113854.20283-3-peter.maydell@linaro.org
2018-07-30hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()Geert Uytterhoeven
When copy_properties_from_host() ignores the error for an optional property, it frees the error, but fails to reset it. Hence if two or more optional properties are missing, an assertion is triggered: util/error.c:57: error_setv: Assertion `*errp == NULL' failed. Fis this by resetting err to NULL after ignoring the error. Fixes: 9481cf2e5f2f2bb6 ("hw/arm/sysbus-fdt: helpers for clock node generation") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-id: 20180725113000.11014-1-geert+renesas@glider.be Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 02:00:57 +0000