| Age | Commit message (Collapse) | Author |
|---|
|
It's observed that Linux kernel booting with the VM reports a "conflicting
mapping for input ID" FW_BUG.
The IORT doc defines "Number of IDs" to be "the number of IDs in the range
minus one", while virt-acpi-build.c simply stores the number of IDs in the
id_count without the "minus one". Meanwhile, some of the callers pass in a
0xFFFF following the spec. So, this is a mismatch between the function and
its callers.
Fix build_iort_id_mapping() by internally subtracting one from the pass-in
@id_count. Accordingly make sure that all existing callers pass in a value
without the "minus one", i.e. change all 0xFFFFs to 0x10000s.
Also, add a few lines of comments to highlight this change along with the
referencing document for this build_iort_id_mapping().
Fixes: 42e0f050e3a5 ("hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619201243.936819-1-nicolinc@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Both the other two callers of build_iort_id_mapping() just directly pass
in the IORT_NODE_OFFSET macro. Keeping a "const uint32_t" local variable
storing the same value doesn't have any gain.
Simplify this by replacing the only place using this local variable with
the macro directly.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-Id: <20240619001708.926511-1-nicolinc@nvidia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This struct has been unused since
Commit f932093ae165 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Enable CPU cluster support on SbsaQemu platform, so that users can
specify a 4-level CPU hierarchy sockets/clusters/cores/threads. And
this topology can be passed to the firmware through /cpus/topology
Device Tree.
Signed-off-by: Xiong Yining <xiongyining1480@phytium.com.cn>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240607103825.1295328-2-xiongyining1480@phytium.com.cn
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Multiple warning messages and corresponding backtraces are observed when Linux
guest is booted on the host with Fujitsu CPUs. One of them is shown as below.
[ 0.032443] ------------[ cut here ]------------
[ 0.032446] uart-pl011 9000000.pl011: ARCH_DMA_MINALIGN smaller than
CTR_EL0.CWG (128 < 256)
[ 0.032454] WARNING: CPU: 0 PID: 1 at arch/arm64/mm/dma-mapping.c:54
arch_setup_dma_ops+0xbc/0xcc
[ 0.032470] Modules linked in:
[ 0.032475] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-452.el9.aarch64
[ 0.032481] Hardware name: linux,dummy-virt (DT)
[ 0.032484] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.032490] pc : arch_setup_dma_ops+0xbc/0xcc
[ 0.032496] lr : arch_setup_dma_ops+0xbc/0xcc
[ 0.032501] sp : ffff80008003b860
[ 0.032503] x29: ffff80008003b860 x28: 0000000000000000 x27: ffffaae4b949049c
[ 0.032510] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 0.032517] x23: 0000000000000100 x22: 0000000000000000 x21: 0000000000000000
[ 0.032523] x20: 0000000100000000 x19: ffff2f06c02ea400 x18: ffffffffffffffff
[ 0.032529] x17: 00000000208a5f76 x16: 000000006589dbcb x15: ffffaae4ba071c89
[ 0.032535] x14: 0000000000000000 x13: ffffaae4ba071c84 x12: 455f525443206e61
[ 0.032541] x11: 68742072656c6c61 x10: 0000000000000029 x9 : ffffaae4b7d21da4
[ 0.032547] x8 : 0000000000000029 x7 : 4c414e494d5f414d x6 : 0000000000000029
[ 0.032553] x5 : 000000000000000f x4 : ffffaae4b9617a00 x3 : 0000000000000001
[ 0.032558] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff2f06c029be40
[ 0.032564] Call trace:
[ 0.032566] arch_setup_dma_ops+0xbc/0xcc
[ 0.032572] of_dma_configure_id+0x138/0x300
[ 0.032591] amba_dma_configure+0x34/0xc0
[ 0.032600] really_probe+0x78/0x3dc
[ 0.032614] __driver_probe_device+0x108/0x160
[ 0.032619] driver_probe_device+0x44/0x114
[ 0.032624] __device_attach_driver+0xb8/0x14c
[ 0.032629] bus_for_each_drv+0x88/0xe4
[ 0.032634] __device_attach+0xb0/0x1e0
[ 0.032638] device_initial_probe+0x18/0x20
[ 0.032643] bus_probe_device+0xa8/0xb0
[ 0.032648] device_add+0x4b4/0x6c0
[ 0.032652] amba_device_try_add.part.0+0x48/0x360
[ 0.032657] amba_device_add+0x104/0x144
[ 0.032662] of_amba_device_create.isra.0+0x100/0x1c4
[ 0.032666] of_platform_bus_create+0x294/0x35c
[ 0.032669] of_platform_populate+0x5c/0x150
[ 0.032672] of_platform_default_populate_init+0xd0/0xec
[ 0.032697] do_one_initcall+0x4c/0x2e0
[ 0.032701] do_initcalls+0x100/0x13c
[ 0.032707] kernel_init_freeable+0x1c8/0x21c
[ 0.032712] kernel_init+0x28/0x140
[ 0.032731] ret_from_fork+0x10/0x20
[ 0.032735] ---[ end trace 0000000000000000 ]---
In Linux, a check is applied to every device which is exposed through
device-tree node. The warning message is raised when the device isn't
DMA coherent and the cache line size is larger than ARCH_DMA_MINALIGN
(128 bytes). The cache line is sorted from CTR_EL0[CWG], which corresponds
to 256 bytes on the guest CPUs. The DMA coherent capability is claimed
through 'dma-coherent' in their device-tree nodes or parent nodes.
This happens even when the device doesn't implement or use DMA at all,
for legacy reasons.
Fix the issue by adding 'dma-coherent' property to the device-tree root
node, meaning all devices are capable of DMA coherent by default.
This both suppresses the spurious kernel warnings and also guards
against possible future QEMU bugs where we add a DMA-capable device
and forget to mark it as dma-coherent.
Signed-off-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240612020506.307793-1-zhenyzha@redhat.com
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
|
|
We're going to make the second UART not always a secure-only device.
Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0
and VIRT_UART1 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-3-peter.maydell@linaro.org
|
|
If there is more than one UART in the DTB, then there is no guarantee
on which order a guest is supposed to initialise them. The standard
solution to this is "serialN" entries in the "/aliases" node of the
dtb which give the nodename of the UARTs.
At the moment we only have two UARTs in the DTB when one is for
the Secure world and one for the Non-Secure world, so this isn't
really a problem. However if we want to add a second NS UART we'll
need the aliases to ensure guests pick the right one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-2-peter.maydell@linaro.org
|
|
Fix the system bus interrupt line to CPU core assignment.
Fixes: ddcf58e044ce0 ("hw/arm/xilinx_zynq: Support up to two CPU cores")
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610052906.4432-1-sebastian.huber@embedded-brains.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Updated firmware for QEMU CI is already in merge queue so we can move
platform to be future proof.
All supported cpus work fine with 1GHz timer frequency when firmware is
fresh enough.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240531093729.220758-2-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'legacy_align' is always NULL, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-15-philmd@linaro.org>
|
|
'uuid_encoded' is always true, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>
|
|
AST2700 dram size calculation is not back compatible AST2600.
According to the DDR capacity hardware behavior,
if users write the data to the address which is beyond the ram size,
it would write the data to the "address % ram_size".
For example:
a. sdram base address "0x4 00000000"
b. sdram size 1 GiB
The available address range is from "0x4 00000000" to "0x4 3FFFFFFF".
If users write 0x12345678 to address "0x5 00000000",
the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678.
Add aspeed_soc_ast2700_dram_init to calculate the dram size and add
memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size
and its read/write handler to emulate DDR capacity hardware behavior.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
AST2700 CPU is ARM Cortex-A35 which is 64 bits.
Add TARGET_AARCH64 to build this machine.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
|
|
Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU).
AST2700 SOC and its interrupt controller are too complex to handle
in the common Aspeed SoC framework. We introduce a new ast2700
class with instance_init and realize handlers.
AST2700 is a 64 bits quad core cpus and support 8 watchdog.
Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8.
In addition, update AspeedSocState to support scuio, sli, sliio and intc.
Add TYPE_ASPEED27X0_SOC machine type.
The SDMC controller is unlocked at SPL stage.
At present, only supports to emulate booting
start from u-boot stage. Set SDMC controller
unlocked by default.
In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts.
It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136.
And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to
GICINT or-gates instead of GIC device.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Moving to Neoverse-N2 gives us several cpu features to use for expanding
our platform:
- branch target identification
- pointer authentication
- RME for confidential computing
- RNG for EFI_PROTOCOL_RNG
- SVE being enabled by default
We do not go for "max" as default to have stable set of features enabled
by default. It is still supported and can be selected with "--cpu"
argument.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20240523165353.6547-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Zynq 7000 SoCs contain two Arm Cortex-A9 MPCore (the Zynq 7000S have only
one core). Add support for up to two simulated cores.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Message-id: 20240524120837.10057-3-sebastian.huber@embedded-brains.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed unnecessary double-cast]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Zynq 7000 SoCs contain a CoreLink L2C-310 cache controller. Add the
corresponding Qemu device to the xilinx-zynq-a9 machine.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Message-id: 20240524120837.10057-2-sebastian.huber@embedded-brains.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some of the source files for older devices use hardcoded tabs
instead of our current coding standard's required spaces.
Fix these in the following files:
- hw/arm/boot.c
- hw/char/omap_uart.c
- hw/gpio/zaurus.c
- hw/input/tsc2005.c
This commit is mostly whitespace-only changes; it also
adds curly-braces to some 'if' statements.
This addresses part of https://gitlab.com/qemu-project/qemu/-/issues/373
but some other files remain to be handled.
Signed-off-by: Tanmay Patil <tanmaynpatil105@gmail.com>
Message-id: 20240508081502.88375-1-tanmaynpatil105@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The value of the mp-affinity property being set in npcm7xx_realize is
always the same as the default value it would have when arm_cpu_realizefn
is called if the property is not set here. So there is no need to set
the property value in npcm7xx_realize function.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240504141733.14813-1-dorjoychy111@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For ARM targets, boards that require TCG are already using "default y".
Switch ARM_VIRT to the same selection mechanism.
No changes to generated config-devices.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-5-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).
STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use little endian for derivative OTP fuse key.
Cc: qemu-stable@nongnu.org
Fixes: c752bb079b ("hw/nvram: NPCM7xx OTP device model")
Suggested-by: Avi Fishman <Avi.Fishman@nuvoton.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240422125813.1403-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Currently the sbsa_gdwt watchdog device hardcodes its frequency at
62.5MHz. In real hardware, this watchdog is supposed to be driven
from the system counter, which also drives the CPU generic timers.
Newer CPU types (in particular from Armv8.6) should have a CPU
generic timer frequency of 1GHz, so we can't leave the watchdog
on the old QEMU default of 62.5GHz.
Make the frequency a QOM property so it can be set by the board,
and have our only board that uses this device set that frequency
to the same value it sets the CPU frequency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-4-peter.maydell@linaro.org
|
|
Currently QEMU CPUs always run with a generic timer counter frequency
of 62.5MHz, but ARMv8.6 CPUs will run at 1GHz. For older versions of
the TF-A firmware that sbsa-ref runs, the frequency of the generic
timer is hardcoded into the firmware, and so if the CPU actually has
a different frequency then timers in the guest will be set
incorrectly.
The default frequency used by the 'max' CPU is about to change, so
make the sbsa-ref board force the CPU frequency to the value which
the firmware expects.
Newer versions of TF-A will read the frequency from the CPU's
CNTFRQ_EL0 register:
https://github.com/ARM-software/arm-trusted-firmware/commit/4c77fac98dac0bebc63798aae9101ac865b87148
so in the longer term we could make this board use the 1GHz
frequency. We will need to make sure we update the binaries used
by our avocado test
Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_impdef
before we can do that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240426122913.3427983-3-peter.maydell@linaro.org
|
|
Misc HW patch queue
- Script to compare machines compat_props[] (Maksim)
- Introduce 'module' CPU topology level (Zhao)
- Various cleanups (Thomas, Zhao, Inès, Bernhard)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t
# wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B
# uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn
# zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA
# MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i
# Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/
# aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp
# l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2
# zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp
# gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY
# SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95
# 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0=
# =tm+U
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits)
hw/core: Support module-id in numa configuration
hw/core: Introduce module-id as the topology subindex
hw/core/machine: Support modules in -smp
hw/core/machine: Introduce the module as a CPU topology level
hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init()
hw/misc : Correct 5 spaces indents in stm32l4x5_exti
hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h'
hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc
hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean
hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean
hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean
hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device
hw: Fix problem with the A*MPCORE switches in the Kconfig files
hw/riscv/virt: Replace sprintf by g_strdup_printf
hw/misc/imx: Replace sprintf() by snprintf()
hw/misc/applesmc: Simplify DeviceReset handler
target/i386: Move APIC related code to cpu-apic.c
hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h
scripts: add script to compare compatibility properties
python/qemu/machine: add method to retrieve QEMUMachine::binary field
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The cpu-cluster device is only needed for some few arm and riscv
machines. Let's avoid compiling and linking it if it is not really
necessary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240415065655.130099-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
A9MPCORE, ARM11MPCORE and A15MPCORE are defined twice, once in
hw/cpu/Kconfig and once in hw/arm/Kconfig. This is only possible
by accident, since hw/cpu/Kconfig is never included from hw/Kconfig.
Fix it by declaring the switches only in hw/cpu/Kconfig (since the
related files reside in the hw/cpu/ folder) and by making sure that
the file hw/cpu/Kconfig is now properly included from hw/Kconfig.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240415065655.130099-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Add the USART to the SoC and connect it to the other implemented devices.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
|
|
If the CPU implements FEAT_NMI, then turn on the NMI support in the
GICv3 too. It's permitted to have a configuration with FEAT_NMI in
the CPU (and thus NMI support in the CPU interfaces too) but no NMI
support in the distributor and redistributor, but this isn't a very
useful setup as it's close to having no NMI support at all.
We don't need to gate the enabling of NMI in the GIC behind a
machine version property, because none of our current CPUs
implement FEAT_NMI, and '-cpu max' is not something we maintain
migration compatibility across versions for. So we can always
enable the GIC NMI support when the CPU has it.
Neither hvf nor KVM support NMI in the GIC yet, so we don't enable
it unless we're using TCG.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240407081733.3231820-25-ruanjinjie@huawei.com
[PMM: Update comment and commit message]
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Wire the new NMI and VINMI interrupt line from the GIC to each CPU if it
is not GICv2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240407081733.3231820-12-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add 9.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Cc: Gavin Shan <gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Similarly to commit 9de9fa5cf2 ("hw/arm/smmu-common: Avoid using
inlined functions with external linkage"):
None of our code base require / use inlined functions with external
linkage. Some places use internal inlining in the hot path. These
two functions are certainly not in any hot path and don't justify
any inlining, so these are likely oversights rather than intentional.
Fix:
C compiler for the host machine: clang (clang 15.0.0 "Apple clang version 15.0.0 (clang-1500.3.9.4)")
...
hw/arm/smmu-common.c:203:43: error: static function 'smmu_hash_remove_by_vmid' is
used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
g_hash_table_foreach_remove(s->iotlb, smmu_hash_remove_by_vmid, &vmid);
^
include/hw/arm/smmu-common.h:197:1: note: use 'static' to give inline function 'smmu_iotlb_inv_vmid' internal linkage
void smmu_iotlb_inv_vmid(SMMUState *s, uint16_t vmid);
^
static
hw/arm/smmu-common.c:139:17: note: 'smmu_hash_remove_by_vmid' declared here
static gboolean smmu_hash_remove_by_vmid(gpointer key, gpointer value,
^
Fixes: ccc3ee3871 ("hw/arm/smmuv3: Add CMDs related to stage-2")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240313184954.42513-2-philmd@linaro.org>
|
|
Change the board revision number and RAM size to 1Gb on 32-bit hosts.
On these systems, RAM has a 2047 MB limit and this breaks the tests.
Fixes: 7785e8ea2204 ("hw/arm: Introduce Raspberry PI 4 machine")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329150155.357043-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: 356b230ed138 ("aspeed/soc : Add AST1030 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-2-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: f25c0ae1079d ("aspeed/soc: Add AST2600 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
staging
aspeed, pnv, vfio queue:
* user device fixes for Aspeed and PowerNV machines
* coverity fix for iommufd
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmX5mm0ACgkQUaNDx8/7
# 7KE/MQ/9GeX4yNBxY2iTATdmPXwjMw8AtKyfIQb605nIO0ch1Z98ywl5VMwCNohn
# ppY9L5bFpEASgRlFVm73X4DGxKyRGpRPqylsvINh0hKciRpmRkELHY3llhnXsd7P
# Q197pDtFr54FeX8j4+hSAu4paT97fPENlKn0J6lto2I1cXGcD1LYNDFhysoXdGme
# brJgo7KjQJZPZ560ZewskL5FWf3G9EkRjpqd8y0G5OtNmAPgAaahOMHhDCXan182
# J89I9CHI5xN45MRfAs8JamSaj/GyNsr4h04WhPa0+VZQ5vsaeW2Ekt4ypj+oAV+p
# wykhYzQk4ALZcmmph2flSAtLa7uheI+imyqubMthQCDj3G8onSQBMd5/4WRK6O49
# 0oE1DpPDEfhlJEQYxaYhOeqeA9iaP+w6V+yE+L5oGlMO66cR7GZsPu0x7kXailbH
# IoHw9mO+vMkpuyeP7M3hA8WRFCdFpf1Nn1Ao5Jz3KoiTyJWlIvX5VSaj12sjddQ2
# fU9SKu2Q5QqS5uQGakkY64EyUy7RkGIX6zY2NIscVe2lfAfKf3mZwu7OIuLjEy5O
# lRn35vWV8fOdRooKoDPTNcdBCaNPi+RApin8chOv5P+F+ie7+Twf9sb1AgH/pIcv
# HptvTXbvSFNbbdb+OE8a5qsqTvnrN8d31IXzrWRYsJB07x2IyoA=
# =zR3v
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Mar 2024 14:00:13 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-for-9.0-20240319' of https://github.com/legoater/qemu:
aspeed/smc: Only wire flash devices at reset
ppc/pnv: I2C controller is not user creatable
vfio/iommufd: Fix memory leak
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Aspeed machines have many Static Memory Controllers (SMC), up to
8, which can only drive flash memory devices. Commit 27a2c66c92ec
("aspeed/smc: Wire CS lines at reset") tried to ease the definitions
of these devices by allowing flash devices from the command line to be
attached to a SSI bus. For that, the wiring of the CS lines of the
Aspeed SMC controller was moved at reset. Two assumptions are made
though, first that the device has a SSI_GPIO_CS GPIO line, which is
not always the case, and second that it is a flash device.
Correct this problem by ensuring that the devices attached to the bus
are of the correct flash type. This fixes a QEMU abort when devices
without a CS line, such as the max111x, are passed on the command
line.
While at it, export TYPE_M25P80 used in the Xilinx Versal Virtual
machine.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2228
Fixes: 27a2c66c92ec ("aspeed/smc: Wire CS lines at reset")
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
[ clg: minor fixes in the commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
clean up smbios_set_defaults() which is reused by legacy
and non legacy machines from being aware of 'legacy' notion
and need to turn it off. And push legacy handling up to
PC machine code where it's relevant.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
|
|
On ARM we set 48b as a default (matching SMMUv3 SMMU_IDR5.VAX == 0).
hw_compat_8_2 is used to handle the compatibility for machine types
before 9.0 (default was 64 bits).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <Zhenzhong.duan@intel.com>
Message-Id: <20240307134445.92296-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ACPI spec provides a scheme to associate "Generic Initiators" [1]
(e.g. heterogeneous processors and accelerators, GPUs, and I/O devices with
integrated compute or DMA engines GPUs) with Proximity Domains. This is
achieved using Generic Initiator Affinity Structure in SRAT. During bootup,
Linux kernel parse the ACPI SRAT to determine the PXM ids and create a NUMA
node for each unique PXM ID encountered. Qemu currently do not implement
these structures while building SRAT.
Add GI structures while building VM ACPI SRAT. The association between
device and node are stored using acpi-generic-initiator object. Lookup
presence of all such objects and use them to build these structures.
The structure needs a PCI device handle [2] that consists of the device BDF.
The vfio-pci device corresponding to the acpi-generic-initiator object is
located to determine the BDF.
[1] ACPI Spec 6.3, Section 5.2.16.6
[2] ACPI Spec 6.3, Table 5.80
Cc: Jonathan Cameron <qemu-devel@nongnu.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cedric Le Goater <clg@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Message-Id: <20240308145525.10886-3-ankita@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
