aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2019-06-13hw/arm/smmuv3: Fix decoding of ID register rangePeter Maydell
The SMMUv3 ID registers cover an area 0x30 bytes in size (12 registers, 4 bytes each). We were incorrectly decoding only the first 0x20 bytes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20190524124829.2589-1-peter.maydell@linaro.org
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-06Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci, pc: cleanups, features stricter rules for acpi tables: we now fail on any difference that isn't whitelisted. vhost-scsi migration. some cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 05 Jun 2019 20:55:04 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: bios-tables-test: ignore identical binaries tests: acpi: add simple arm/virt testcase tests: add expected ACPI tables for arm/virt board bios-tables-test: list all tables that differ vhost-scsi: Allow user to enable migration vhost-scsi: Add VMState descriptor vhost-scsi: The vhost backend should be stopped when the VM is not running bios-tables-test: add diff allowed list vhost: fix memory leak in vhost_user_scsi_realize vhost: fix incorrect print type vhost: remove the dead code docs: smbios: remove family=x from type2 entry description pci: Fold pci_get_bus_devfn() into its sole caller pci: Make is_bridge a bool pcie: Simplify pci_adjust_config_limit() acpi: pci: use build_append_foo() API to construct MCFG hw/acpi: Consolidate build_mcfg to pci.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-03imx25-pdk: create ds1338 for qtest inside the testPaolo Bonzini
There is no need to have a test device created by the board. Instead, create it in the qtest so that we will be able to run it on other boards too. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-29hw/acpi: Consolidate build_mcfg to pci.cWei Yang
Now we have two identical build_mcfg functions. Consolidate them in acpi/pci.c. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> v4: * ACPI_PCI depends on both ACPI and PCI * rebase on latest master, adjust arm Kconfig v3: * adjust changelog based on Igor's suggestion Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-24hw/arm/mps2: Use object_initialize_child for correct reference countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script: @use_sysbus_init_child_obj_missing_parent@ expression child_ptr; expression child_type; expression child_size; @@ - object_initialize(child_ptr, child_size, child_type); ... - qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default()); ... ?- object_unref(OBJECT(child_ptr)); + sysbus_init_child_obj(OBJECT(PARENT_OBJ), "CHILD_NAME", child_ptr, + child_size, child_type); We let the MPS2 boards adopt the cpu core, the FPGA and the SCC children. While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. This choice also matches when using sysbus_init_child_obj(), since its code is: void sysbus_init_child_obj(Object *parent, const char *childname, void *child, size_t childsize, const char *childtype) { object_initialize_child(parent, childname, child, childsize, childtype, &error_abort, NULL); qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); } Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-16-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/arm: Use object_initialize_child for correct reference countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (with a bit of manual fix-up for overly long lines): @use_object_initialize_child@ expression parent_obj; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, &error_abort, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL); ... ?- object_unref(OBJECT(child_ptr)); | - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, errp, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp); ... ?- object_unref(OBJECT(child_ptr)); ) @use_sysbus_init_child_obj@ expression parent_obj; expression dev; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); ... - qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default()); | - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); - dev = DEVICE(child_ptr); - qdev_set_parent_bus(dev, sysbus_get_default()); ) While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. This choice also matches when using sysbus_init_child_obj(), since its code is: void sysbus_init_child_obj(Object *parent, const char *childname, void *child, size_t childsize, const char *childtype) { object_initialize_child(parent, childname, child, childsize, childtype, &error_abort, NULL); qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); } Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-9-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/arm/aspeed: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (with a bit of manual fix-up for overly long lines): @use_object_initialize_child@ expression parent_obj; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, &error_abort, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL); ... ?- object_unref(OBJECT(child_ptr)); | - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, errp, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp); ... ?- object_unref(OBJECT(child_ptr)); ) @use_sysbus_init_child_obj@ expression parent_obj; expression dev; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); ... - qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default()); | - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); - dev = DEVICE(child_ptr); - qdev_set_parent_bus(dev, sysbus_get_default()); ) While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. This choice also matches when using sysbus_init_child_obj(), since its code is: void sysbus_init_child_obj(Object *parent, const char *childname, void *child, size_t childsize, const char *childtype) { object_initialize_child(parent, childname, child, childsize, childtype, &error_abort, NULL); qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); } Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20190507163416.24647-8-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/arm/bcm2835: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (with a bit of manual fix-up for overly long lines): @use_object_initialize_child@ expression parent_obj; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, &error_abort, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL); ... ?- object_unref(OBJECT(child_ptr)); | - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, errp, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp); ... ?- object_unref(OBJECT(child_ptr)); ) @use_sysbus_init_child_obj@ expression parent_obj; expression dev; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); ... - qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default()); | - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); - dev = DEVICE(child_ptr); - qdev_set_parent_bus(dev, sysbus_get_default()); ) While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. This choice also matches when using sysbus_init_child_obj(), since its code is: void sysbus_init_child_obj(Object *parent, const char *childname, void *child, size_t childsize, const char *childtype) { object_initialize_child(parent, childname, child, childsize, childtype, &error_abort, NULL); qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); } Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-7-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/arm/bcm2835: Use object_initialize() on PL011StatePhilippe Mathieu-Daudé
To be coherent with the other peripherals contained in the BCM2835PeripheralState structure, directly allocate the PL011State (instead of using the pl011 uart as a pointer to a SysBusDevice). Initialize the PL011State with object_initialize() instead of object_new(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-6-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24hw/arm/bcm2835: Use TYPE_PL011 instead of hardcoded stringPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-5-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-23hw/arm/exynos4210: QOM'ify the Exynos4210 SoCPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190520214342.13709-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-23hw/arm/exynos4210: Add DMA support for the Exynos4210Guenter Roeck
QEMU already supports pl330. Instantiate it for Exynos4210. Relevant part of Linux arch/arm/boot/dts/exynos4.dtsi: / { soc: soc { amba { pdma0: pdma@12680000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; }; pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; }; mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; }; }; }; }; Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190520214342.13709-4-philmd@redhat.com [PMD: Do not set default qdev properties, create the controllers in the SoC rather than the board (Peter Maydell), add dtsi in commit message] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-23hw/arm/exynos4: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190520214342.13709-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-23hw/arm/exynos4: Remove unuseful debug codePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190520214342.13709-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-23arm: Rename hw/arm/arm.h to hw/arm/boot.hPeter Maydell
The header file hw/arm/arm.h now includes only declarations relating to hw/arm/boot.c functionality. Rename it accordingly, and adjust its header comment. The bulk of this commit was created via perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h In a few cases we can just delete the #include: hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and include/hw/arm/bcm2836.h did not require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
2019-05-20hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()Wei Yang
To build MCFG, two information is necessary: * bus number * base address Abstract these two information to AcpiMcfgInfo so that build_mcfg and build_mcfg_q35 will have the same declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190419003053.8260-5-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20hw/arm/virt-acpi-build: remove unnecessary variable mcfg_startWei Yang
mcfg_start points to the start of MCFG table and is used in build_header. While this information could be derived from mcfg. This patch removes the unnecessary variable mcfg_start. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190419003053.8260-3-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-13Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2019-05-13' into staging Kconfig settings for the Arm machines # gpg: Signature made Mon 13 May 2019 09:19:43 BST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-05-13: (29 commits) hw/arm: Remove hard-enablement of the remaining PCI devices hw/arm: Express dependencies of the musca machines with Kconfig hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig hw/arm: Express dependencies of the remaining IMX boards with Kconfig hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig hw/arm: Express dependencies of sabrelite with Kconfig hw/arm: Express dependencies of canon-a1100 with Kconfig hw/arm: Express dependencies of the raspi machines with Kconfig hw/arm: Express dependencies of the MPS2 boards with Kconfig hw/arm: Express dependencies of allwinner / cubieboard with Kconfig hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig hw/arm: Express dependencies of the virt machine with Kconfig hw/arm: Express dependencies of the aspeed boards with Kconfig hw/arm: Express dependencies of collie with Kconfig hw/arm: Express dependencies of xilinx-zynq with Kconfig hw/arm: Express dependencies of the PXA2xx machines with Kconfig hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig hw/arm: Express dependencies of stellaris with Kconfig ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13hw/arm: Express dependencies of the musca machines with KconfigThomas Huth
Dependencies have been determined with trial-and-error and by looking at the musca.c source file. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the xlnx-versal-virt machine with KconfigThomas Huth
Dependencies have been determined with trial-and-error and by looking at the xlnx-versal.c source file. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the ZynqMP zcu102 machine with KconfigThomas Huth
This cleans up most settings in default-configs/aarch64-softmmu.mak. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the microbit / nrf51 machine with KconfigThomas Huth
Add Kconfig dependencies for the NRF51 / microbit machine. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the remaining IMX boards with KconfigThomas Huth
IMX25, IMX7 and IMX6UL were still missing the Kconfig dependencies. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with KconfigThomas Huth
Add Kconfig dependencies for the emcraft-sf2 machine - we also distinguish between the machine (CONFIG_EMCRAFT_SF2) and the SoC (CONFIG_MSF2) now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of sabrelite with KconfigThomas Huth
Add Kconfig dependencies for the Sabrelite / iMX6 machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of canon-a1100 with KconfigThomas Huth
Add Kconfig dependencies for the DIGIC / canon-a1100 machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the raspi machines with KconfigThomas Huth
Most of the code is directly controlled by the CONFIG_RASPI switch, so not much to add here additionally. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the MPS2 boards with KconfigThomas Huth
Add Kconfig dependencies for the mps2-an* machines. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of allwinner / cubieboard with KconfigThomas Huth
Add dependencies for the Cubitech Cubieboard. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of netduino / stm32f2xx with KconfigThomas Huth
Netduino only depends on the stm32f205 SoC which in turn depends on its components. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the virt machine with KconfigThomas Huth
Dependencies have been determined by looking at hw/arm/virt.c Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the aspeed boards with KconfigThomas Huth
Dependencies have been determined by looking at hw/arm/aspeed.c Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of collie with KconfigThomas Huth
Add Kconfig dependencies for the Strongarm collie machine. This patch is based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of xilinx-zynq with KconfigThomas Huth
Add Kconfig dependencies for the xilinx-zynq-a9 board. This patch is based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the PXA2xx machines with KconfigThomas Huth
Add Kconfig dependencies for the PXA2xx machines (akita, borzoi, connex and verdex gumstix, tosa, mainstone, spitz, terrier and z2). This patch is based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of realview, versatile and vexpress with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of stellaris with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the OMAP machines with KconfigThomas Huth
Add Kconfig dependencies for the OMAP machines (cheetah, n800, n810, sx1 and sx1-v1). This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of musicpal with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the fsl-imx31 machine with KconfigThomas Huth
Add Kconfig dependencies for the fsl-imx31 / kzm machine. This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of integratorcp with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the highbank machines with KconfigThomas Huth
Add Kconfig dependencies for the highbank machine (and the midway machine). This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the exynos machines with KconfigThomas Huth
Add Kconfig dependencies for the Exynos-related boards (nuri and smdkc210). This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-6-armbru@redhat.com> [Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-07arm: aspeed: Set SDRAM sizeJoel Stanley
We currently use Qemu's default of 128MB. As we know how much ram each machine ships with, make it easier on users by setting a default. It can still be overridden with -m on the command line. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190503022958.1394-1-joel@jms.id.au Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07hw/arm/raspi: Diagnose requests for too much RAMPeter Maydell
The Raspberry Pi boards have a physical memory map which does not allow for more than 1GB of RAM. Currently if the user tries to ask for more then we fail in a confusing way: $ qemu-system-aarch64 --machine raspi3 -m 8G Unexpected error in visit_type_uintN() at qapi/qapi-visit-core.c:164: qemu-system-aarch64: Parameter 'vcram-base' expects uint32_t Aborted (core dumped) Catch this earlier and diagnose it with a more friendly message: $ qemu-system-aarch64 --machine raspi3 -m 8G qemu-system-aarch64: Requested ram size is too large for this machine: maximum is 1GB Fixes: https://bugs.launchpad.net/qemu/+bug/1794187 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
2019-05-07hw/arm/virt: Support firmware configuration with -blockdevMarkus Armbruster
The ARM virt machines put firmware in flash memory. To configure it, you use -drive if=pflash,unit=0,... and optionally -drive if=pflash,unit=1,... Why two -drive? This permits setting up one part of the flash memory read-only, and the other part read/write. It also makes upgrading firmware on the host easier. Below the hood, we get two separate flash devices, because we were too lazy to improve our flash device models to support sector protection. The problem at hand is to do the same with -blockdev somehow, as one more step towards deprecating -drive. We recently solved this problem for x86 PC machines, in commit ebc29e1beab. See the commit message for design rationale. This commit solves it for ARM virt basically the same way: new machine properties pflash0, pflash1 forward to the onboard flash devices' properties. Requires creating the onboard devices in the .instance_init() method virt_instance_init(). The existing code to pick up drives defined with -drive if=pflash is replaced by code to desugar into the machine properties. There are a few behavioral differences, though: * The flash devices are always present (x86: only present if configured) * Flash base addresses and sizes are fixed (x86: sizes depend on images, mapped back to back below a fixed address) * -bios configures contents of first pflash (x86: -bios configures ROM contents) * -bios is rejected when first pflash is also configured with -machine pflash0=... (x86: bios is silently ignored then) * -machine pflash1=... does not require -machine pflash0=... (x86: it does). The actual code is a bit simpler than for x86 mostly due to the first two differences. Before the patch, all the action is in create_flash(), called from the machine's .init() method machvirt_init(): main() machine_run_board_init() machvirt_init() create_flash() create_one_flash() for flash[0] create configure includes obeying -drive if=pflash,unit=0 realize map fall back to -bios create_one_flash() for flash[1] create configure includes obeying -drive if=pflash,unit=1 realize map update FDT To make the machine properties work, we need to move device creation to its .instance_init() method virt_instance_init(). Another complication is machvirt_init()'s computation of @firmware_loaded: it predicts what create_flash() will do. Instead of predicting what create_flash()'s replacement virt_firmware_init() will do, I decided to have virt_firmware_init() return what it did. Requires calling it a bit earlier. Resulting call tree: main() current_machine = object_new() ... virt_instance_init() virt_flash_create() virt_flash_create1() for flash[0] create configure: set defaults become child of machine [NEW] add machine prop pflash0 as alias for drive [NEW] virt_flash_create1() for flash[1] create configure: set defaults become child of machine [NEW] add machine prop pflash1 as alias for drive [NEW] for all machine props from the command line: machine_set_property() ... property_set_alias() for machine props pflash0, pflash1 ... set_drive() for cfi.pflash01 prop drive this is how -machine pflash0=... etc set machine_run_board_init(current_machine); virt_firmware_init() pflash_cfi01_legacy_drive() legacy -drive if=pflash,unit=0 and =1 [NEW] virt_flash_map() virt_flash_map1() for flash[0] configure: num-blocks realize map virt_flash_map1() for flash[1] configure: num-blocks realize map fall back to -bios virt_flash_fdt() update FDT You have László to thank for making me explain this in detail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20190416091348.26075-4-armbru@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move SMSC 91C111 declaration into a new headerPhilippe Mathieu-Daudé
This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-28 14:27:57 +0000