aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/virt-acpi-build.c
AgeCommit message (Collapse)Author
2022-11-07hw/arm/virt: Enable HMAT on arm virt machineXiang Chen
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"), HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07acpi: arm/virt: madt: bump to revision 4 accordingly to ACPI 6.0 Errata AMiguel Luis
MADT has been updated with the GIC Structures from ACPI 6.0 Errata A and so MADT revision and GICC Structure must be updated also. Fixes: 37f33084ed2e ("acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20221011181730.10885-4-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07acpi: fadt: support revision 6.0 of the ACPI specificationMiguel Luis
Update the Fixed ACPI Description Table (FADT) to revision 6.0 of the ACPI specification adding the field "Hypervisor Vendor Identity". This field's description states the following: "64-bit identifier of hypervisor vendor. All bytes in this field are considered part of the vendor identity. These identifiers are defined independently by the vendors themselves, usually following the name of the hypervisor product. Version information should NOT be included in this field - this shall simply denote the vendor's name or identifier. Version information can be communicated through a supplemental vendor-specific hypervisor API. Firmware implementers would place zero bytes into this field, denoting that no hypervisor is present in the actual firmware." Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20221011181730.10885-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-09acpi: arm/virt: build_gtdt: fix invalid 64-bit physical addressesMiguel Luis
Per the ACPI 6.5 specification, on the GTDT Table Structure, the Counter Control Block Address and Counter Read Block Address fields of the GTDT table should be set to 0xFFFFFFFFFFFFFFFF if not provided, rather than 0x0. Fixes: 41041e57085 ("acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Message-Id: <20220920162137.75239-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
2022-08-12hw/arm/virt-acpi-build: Present the GICR structure properly for GICv4Zenghui Yu
With the introduction of the new TCG GICv4, build_madt() is badly broken as we do not present any GIC Redistributor structure in MADT for GICv4 guests, so that they have no idea about where the Redistributor register frames are. This fixes a Linux guest crash at boot time with ACPI enabled and '-machine gic-version=4'. While at it, let's convert the remaining hard coded gic_version into enumeration VIRT_GIC_VERSION_2 for consistency. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20220812022018.1069-1-yuzenghui@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/arm/virt: Drop superfluous checks against highmemMarc Zyngier
Now that the devices present in the extended memory map are checked against the available PA space and disabled when they don't fit, there is no need to keep the same checks against highmem, as highmem really is a shortcut for the PA space being 32bit. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-id: 20220114140741.1358263-7-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/arm/virt: Add a control for the the highmem redistributorsMarc Zyngier
Just like we can control the enablement of the highmem PCIe region using highmem_ecam, let's add a control for the highmem GICv3 redistributor region. Similarily to highmem_ecam, these redistributors are disabled when highmem is off. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220114140741.1358263-3-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/arm/virt: Add a control for the the highmem PCIe MMIOMarc Zyngier
Just like we can control the enablement of the highmem PCIe ECAM region using highmem_ecam, let's add a control for the highmem PCIe MMIO region. Similarily to highmem_ecam, this region is disabled when highmem is off. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220114140741.1358263-2-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-07acpi: tpm: Add missing device identification objectsStefan Berger
Add missing TPM device identification objects _STR and _UID. They will appear as files 'description' and 'uid' under Linux sysfs. Following inspection of sysfs entries for hardware TPMs we chose uid '1'. Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Ani Sinha <ani@anisinha.ca> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/708 Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Shannon Zhao <shannon.zhaosl@gmail.com> Message-id: 20211223022310.575496-3-stefanb@linux.ibm.com Message-Id: <20220104175806.872996-3-stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2021-12-15hw/arm/virt-acpi-build: Add VIOT table for virtio-iommuJean-Philippe Brucker
When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-10-21hw/arm/virt-acpi-build: Generate PPTT tableYanan Wang
Generate the Processor Properties Topology Table (PPTT) for ARM virt machines supporting it (>= 6.2). Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20211020142125.7516-8-wangyanan55@huawei.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-20hw/arm/virt_acpi_build: Generate DBG2 tableEric Auger
ARM SBBR specification mandates DBG2 table (Debug Port Table 2) since v1.0 (ARM DEN0044F 8.3.1.7 DBG2). The DBG2 table allows to describe one or more debug ports. Generate an DBG2 table featuring a single debug port, the PL011. The DBG2 specification can be found at "Microsoft Debug Port Table 2 (DBG2)" https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table?redirectedfrom=MSDN Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20211019080037.930641-3-eric.auger@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-20hw/arm/virt-acpi-build: IORT upgrade up to revision E.bEric Auger
Upgrade the IORT table from B to E.b specification revision (ARM DEN 0049E.b). The SMMUv3 and root complex node have additional fields. Also unique IORT node identifiers are introduced: they are generated in sequential order. They are not cross-referenced though. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20211014115643.756977-3-eric.auger@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-05acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead ↵Igor Mammedov
of build_header() it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation, which hides offsets magic from API user. while at it, replace packed structure with endian agnostic build_append_FOO() API. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-33-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead ↵Igor Mammedov
of build_header() it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation, which hides offsets magic from API user. while at it, replace packed structure with endian agnostic build_append_FOO() API. PS: Spec is Microsoft hosted, however 1.02 is no where to be found (MS lists only the current revision) and the current revision is 1.07, so bring comments in line with 1.07 as this is the only available spec. There is no content change between originally implemented 1.02 (using QEMU code as reference) and 1.07. The only change is renaming 'Reserved2' field to 'Language', with the same 0 value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-32-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: arm/virt: build_spcr: fix invalid castIgor Mammedov
implicit cast to structure uint8_t member didn't raise error when assigning value from incorrect enum, but when using build_append_gas() (next patch) it will error out with (clang): implicit conversion from enumeration type 'AmlRegionSpace' to different enumeration type 'AmlAddressSpace' fix cast error by using correct AML_AS_SYSTEM_MEMORY enum Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-31-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() APIIgor Mammedov
Drop usage of packed structures and explicit endian conversions when building IORT table use endian agnostic build_append_int_noprefix() API to build it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210924122802.1455362-30-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com>
2021-10-05acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead ↵Igor Mammedov
of build_header() it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation, which hides offsets magic from API user. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-29-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead ↵Igor Mammedov
of build_header() it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation, which hides offsets magic from API user. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-28-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT tableIgor Mammedov
Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-26-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead of ↵Igor Mammedov
build_header() it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation, which hides offsets magic from API user. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-22-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: use build_append_int_noprefix() API to compose SRAT tableIgor Mammedov
Drop usage of packed structures and explicit endian conversions when building SRAT tables for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-18-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end() instead ↵Igor Mammedov
of build_header() it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation, which hides offsets magic from API user. While at it switch to build_append_int_noprefix() to build table entries (which also removes some manual offset calculations) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210924122802.1455362-17-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3Xingang Wang
When we build IORT table with SMMUv3 and bypass iommu feature enabled, we can no longer setup one map from RC to SMMUv3 covering the whole RIDs. We need to walk the PCI bus and check whether the root bus will bypass iommu, setup RC -> SMMUv3 -> ITS map for RC which will not bypass iommu. When a SMMUv3 node exist, we setup the idmap from SMMUv3 to ITS covering the whole RIDs, and only modify the map from RC to SMMUv3. We build RC -> SMMUv3 -> ITS map for root bus with bypass_iommu disabled, and build idmap from RC to ITS directly for the rest of the whole RID space. For example we run qemu with command line: qemu/build/aarch64-softmmu/qemu-system-aarch64 \ -kernel arch/arm64/boot/Image \ -enable-kvm \ -cpu host \ -m 8G \ -smp 8,sockets=2,cores=4,threads=1 \ -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3,default_bus_bypass_iommu=true \ -drive file=./QEMU_EFI-pflash.raw,if=pflash,format=raw,unit=0,readonly=on \ -device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \ -device pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x3.0x2,bypass_iommu=true \ -device pcie-root-port,port=0x20,chassis=1,id=pci.1,bus=pcie.0,addr=0x2 \ -device pcie-root-port,port=0x20,chassis=11,id=pci.11,bus=pci.10,addr=0x1 \ -device pcie-root-port,port=0x20,chassis=21,id=pci.21,bus=pci.20,addr=0x1 \ -device virtio-scsi-pci,id=scsi0,bus=pci.1,addr=0x1 \ -device virtio-scsi-pci,id=scsi1,bus=pci.11,addr=0x1 \ -device virtio-scsi-pci,id=scsi2,bus=pci.21,addr=0x1 \ -initrd /mnt/davinci/wxg/kill-linux/rootfs/mfs.cpio.gz \ -nographic \ -append "rdinit=init console=ttyAMA0 earlycon=pl011,0x9000000 nokaslr" \ And we get guest configuration: -+-[0000:20]---01.0-[21]-- +-[0000:10]---01.0-[11]-- \-[0000:00]-+-00.0 Device 1b36:0008 +-01.0 Device 1af4:1000 \-02.0-[01]-- With bypass_iommu enabled, the attached devices will bypass iommu. /sys/class/iommu/smmu3.0x0000000009050000/ |-- device -> ../../../arm-smmu-v3.0.auto |-- devices | `-- 0000:10:01.0 -> ../../../../../pci0000:10/0000:10:01.0 Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1625748919-52456-7-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-06-15arm: Eliminate all TPM related code if CONFIG_TPM is not setStefan Berger
Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210614191335.1968807-3-stefanb@linux.ibm.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-04-12hw/arm/virt-acpi-build: Fix GSIV values of the {GERR, Sync} interruptsZenghui Yu
The GSIV values in SMMUv3 IORT node are not correct as they don't match the SMMUIrq enumeration, which describes the IRQ<->PIN mapping used by our emulated vSMMU. Fixes: a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210402084731.93-1-yuzenghui@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-22acpi: Move maximum size logic into acpi_add_rom_blob()David Hildenbrand
We want to have safety margins for all tables based on the table type. Let's move the maximum size logic into acpi_add_rom_blob() and make it dependent on the table name, so we don't have to replicate for each and every instance that creates such tables. Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210304105554.121674-4-david@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: Set proper maximum size for "etc/table-loader" blobDavid Hildenbrand
The resizeable memory region / RAMBlock that is created for the cmd blob has a maximum size of whole host pages (e.g., 4k), because RAMBlocks work on full host pages. In addition, in i386 ACPI code: acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE); makes sure to align to multiples of 4k, padding with 0. For example, if our cmd_blob is created with a size of 2k, the maximum size is 4k - we cannot grow beyond that. Growing might be required due to guest action when rebuilding the tables, but also on incoming migration. This automatic generation of the maximum size used to be sufficient, however, there are cases where we cross host pages now when growing at runtime: we exceed the maximum size of the RAMBlock and can crash QEMU when trying to resize the resizeable memory region / RAMBlock: $ build/qemu-system-x86_64 --enable-kvm \ -machine q35,nvdimm=on \ -smp 1 \ -cpu host \ -m size=2G,slots=8,maxmem=4G \ -object memory-backend-file,id=mem0,mem-path=/tmp/nvdimm,size=256M \ -device nvdimm,label-size=131072,memdev=mem0,id=nvdimm0,slot=1 \ -nodefaults \ -device vmgenid \ -device intel-iommu Results in: Unexpected error in qemu_ram_resize() at ../softmmu/physmem.c:1850: qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument In this configuration, we consume exactly 4k (32 entries, 128 bytes each) when creating the VM. However, once the guest boots up and maps the MCFG, we also create the MCFG table and end up consuming 2 additional entries (pointer + checksum) -- which is where we try resizing the memory region / RAMBlock, however, the maximum size does not allow for it. Currently, we get the following maximum sizes for our different mutable tables based on behavior of resizeable RAMBlock: hw table max_size ------- --------------------------------------------------------- virt "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000) virt "etc/table-loader" HOST_PAGE_ALIGN(initial_size) virt "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size) i386 "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000) i386 "etc/table-loader" HOST_PAGE_ALIGN(initial_size) i386 "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size) microvm "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000) microvm "etc/table-loader" HOST_PAGE_ALIGN(initial_size) microvm "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size) Let's set the maximum table size for "etc/table-loader" to 64k, so we can properly grow at runtime, which should be good enough for the future. Migration is not concerned with the maximum size of a RAMBlock, only with the used size - so existing setups are not affected. Of course, we cannot migrate a VM that would have crash when started on older QEMU from new QEMU to older QEMU without failing early on the destination when synchronizing the RAM state: qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument qemu-system-x86_64: error while loading state for instance 0x0 of device 'ram' qemu-system-x86_64: load of migration failed: Invalid argument We'll refactor the code next, to make sure we get rid of this implicit behavior for "etc/acpi/rsdp" as well and to make the code easier to grasp. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210304105554.121674-2-david@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-05acpi: Permit OEM ID and OEM table ID fields to be changedMarian Postevca
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI table name. Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID and OEM table ID for the strings "BOCHS" and "BXPC" and if they are found, the game crashes(this may be an intentional detection mechanism to prevent playing the game in a virtualized environment). This patch allows you to override these default values. The feature can be used in this manner: qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN The oem-id string can be up to 6 bytes in size, and the oem-table-id string can be up to 8 bytes in size. If the string are smaller than their respective sizes they will be padded with space. If either of these parameters is not set, the current default values will be used for the one missing. Note that the the OEM Table ID field will not be extended with the name of the table, but will use either the default name or the user provided one. This does not affect the -acpitable option (for user-defined ACPI tables), which has precedence over -machine option. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210119003216.17637-3-posteuca@mutex.one> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-08hw/arm/virt: Remove virt machine state 'smp_cpus'Andrew Jones
virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-08acpi: Align the size to 128kYubo Miao
If table size is changed between virt_acpi_build and virt_acpi_build_update, the table size would not be updated to UEFI, therefore, just align the size to 128kb, which is enough and same with x86. It would warn if 64k is not enough and the align size should be updated. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-7-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi/gpex: Build tables for pxbYubo Miao
The resources of pxbs are obtained by crs_build and the resources used by pxbs would be moved from the resources defined for host-bridge. The resources for pxb are composed of following two parts: 1. The bar space of the pci-bridge/pcie-root-port behined it 2. The config space of devices behind it. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-6-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-30arm: use acpi_dsdt_add_gpexGerd Hoffmann
Fill gpex config struct from memory map, then call the new acpi_dsdt_add_gpex helper function. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-4-kraxel@redhat.com
2020-09-17acpi: move acpi_dsdt_add_power_button() to gedGerd Hoffmann
Allow reuse for microvm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-01hw/arm/virt-acpi-build:Remove dead assignment in build_madt()Chen Qun
Clang static code analyzer show warning: hw/arm/virt-acpi-build.c:641:5: warning: Value stored to 'madt' is never read madt = acpi_data_push(table_data, sizeof *madt); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200827110311.164316-2-kuhn.chenqun@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27arm/acpi: fix an out of spec _UID for PCI rootMichael S. Tsirkin
On ARM/virt machine type QEMU currently reports an incorrect _UID in ACPI. The particular node in question is the primary PciRoot (PCI0 in ACPI), which gets assigned PCI0 in ACPI UID and 0 in the DevicePath. This is due to the _UID assigned to it by build_dsdt in hw/arm/virt-acpi-build.c Which does not correspond to the primary PCI identifier given by pcibus_num in hw/pci/pci.c In UEFI v2.8, section "10.4.2 Rules with ACPI _HID and _UID" ends with the paragraph, Root PCI bridges will use the plug and play ID of PNP0A03, This will be stored in the ACPI Device Path _HID field, or in the Expanded ACPI Device Path _CID field to match the ACPI name space. The _UID in the ACPI Device Path structure must match the _UID in the ACPI name space. (See especially the last sentence.) A similar bug has been reported on i386, on that architecture it has been reported to confuse at least macOS which uses ACPI UIDs to build the DevicePath for NVRAM boot options, while OVMF firmware gets them via an internal channel through QEMU. When UEFI firmware and ACPI have different values, this makes the underlying operating system unable to report its boot option. Cc: qemu-stable@nongnu.org Reported-by: Vitaly Cheptsov <vit9696@protonmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-07-03hw/arm/virt-acpi-build: Only expose flash on older machine typesAndrew Jones
The flash device is exclusively for the host-controlled firmware, so we should not expose it to the OS. Exposing it risks the OS messing with it, which could break firmware runtime services and surprise the OS when all its changes disappear after reboot. As firmware needs the device and uses DT, we leave the device exposed there. It's up to firmware to remove the nodes from DT before sending it on to the OS. However, there's no need to force firmware to remove tables from ACPI (which it doesn't know how to do anyway), so we simply don't add the tables in the first place. But, as we've been adding the tables for quite some time and don't want to change the default hardware exposed to versioned machines, then we only stop exposing the flash device tables for 5.1 and later machine types. Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-24arm/acpi: Add the TPM2.0 device under the DSDTEric Auger
In case it is dynamically instantiated, add the TPM 2.0 device object under the DSDT table in the ACPI namespace. Its HID is MSFT0101 while its current resource settings (CRS) property is initialized with the guest physical address and MMIO size of the device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-3-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09arm/acpi: TPM2 ACPI table supportEric Auger
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been dynamically instantiated. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/acpi/nvdimm: add a helper to augment SRAT generationVishal Verma
NVDIMMs can belong to their own proximity domains, as described by the NFIT. In such cases, the SRAT needs to have Memory Affinity structures in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node data structures properly during NUMA initialization. See the following for an example failure case. https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/ Introduce a new helper, nvdimm_build_srat(), and call it for both the i386 and arm versions of 'build_srat()' to augment the SRAT with memory affinity information for NVDIMMs. The relevant command line options to exercise this are below. Nodes 0-1 contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address space. -object memory-backend-ram,id=mem0,size=2048M -numa node,nodeid=0,memdev=mem0, -numa cpu,node-id=0,socket-id=0 -object memory-backend-ram,id=mem1,size=2048M -numa node,nodeid=1,memdev=mem1, -numa cpu,node-id=1,socket-id=1 -numa node,nodeid=2, -object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G -device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2 -numa node,nodeid=3, -object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G -device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3 Cc: Jingqi Liu <jingqi.liu@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-14ACPI: Record the Generic Error Status Block addressDongjiu Geng
Record the GHEB address via fw_cfg file, when recording a error to CPER, it will use this address to find out Generic Error Data Entries and write the error. In order to avoid migration failure, make hardware error table address to a part of GED device instead of global variable, then this address will be migrated to target QEMU. Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Build Hardware Error Source TableDongjiu Geng
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. Now it only supports ARMv8 SEA, a type of Generic Hardware Error Source version 2(GHESv2) error source. Afterwards, we can extend the supported types if needed. For the CPER section, currently it is memory section because kernel mainly wants userspace to handle the memory errors. This patch follows the spec ACPI 6.2 to build the Hardware Error Source table. For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst build_ghes_hw_error_notification() helper will help to add Hardware Error Notification to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need explicit conversion. Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Build related register address fields via hardware error fw_cfg blobDongjiu Geng
This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm/virt: Add nvdimm hot-plug infrastructureKwangwoo Lee
This adds support to init nvdimm acpi state and build nvdimm acpi tables. Please note nvdimm_support is not yet enabled. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-13acpi: Use macro for table-loader file nameShameer Kolothum
Use macro for "etc/table-loader" and move it to the header file similar to ACPI_BUILD_TABLE_FILE/ACPI_BUILD_RSDP_FILE etc. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200403101827.30664-2-shameerali.kolothum.thodi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-29acpi: add acpi=OnOffAuto machine property to x86 and arm virtGerd Hoffmann
Remove the global acpi_enabled bool and replace it with an acpi OnOffAuto machine property. qemu throws an error now if you use -no-acpi while the machine type you are using doesn't support acpi in the first place. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200320100136.11717-1-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-13arm/acpi: simplify the description of PCI _CRSHeyi Guo
The original code defines a named object for the resource template but then returns the resource template object itself; the resulted output is like below: Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum 0x00FF, // Range Maximum 0x0000, // Translation Offset 0x0100, // Length ,, ) ...... }) Return (ResourceTemplate () { WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum 0x00FF, // Range Maximum 0x0000, // Translation Offset 0x0100, // Length ,, ) ...... }) } So the named object "RBUF" is actually useless. The more natural way is to return RBUF instead, or simply drop RBUF definition. Choose the latter one to simplify the code. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-7-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/acpi: fix duplicated _UID of PCI interrupt link devicesHeyi Guo
Using _UID of 0 for all PCI interrupt link devices absolutely violates the spec. Simply increase one by one. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-6-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/acpi: fix PCI _PRT definitionHeyi Guo
The address field in each _PRT mapping package should be constructed with high word for device# and low word for function#, so it is wrong to use bus_no as the high word. The existing code adds a bunch useless entries with device #s above 31. Enumerate all possible slots (i.e. PCI_SLOT_MAX) instead. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-5-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/virt/acpi: remove _ADR from devices identified by _HIDHeyi Guo
According to ACPI spec, _ADR should be used for device on a bus that has a standard enumeration algorithm, but not for device which is on system bus and must be enumerated by OSPM. And it is not recommended to contain both _HID and _ADR in a single device. See ACPI 6.3, section 6.1, top of page 343: A device object must contain either an _HID object or an _ADR object, but should not contain both. (https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf) Signed-off-by: Heyi Guo <guoheyi@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-4-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-13 13:22:38 +0000